diff --git a/README.md b/README.md
index 3e70bb8..3280628 100644
--- a/README.md
+++ b/README.md
@@ -4,9 +4,9 @@
 `make`
 
 ## Running
-To see console output, a USB to TTL adapter is needed. For the Creality K1 board, the serial pinout is by the reset/boot bottom.
+To see console output, a USB to TTL adapter is needed. For the Creality K1 board, the serial pinout is by the reset/boot botton.
 
-To Enter USB Boot mode. For the K1, hold the boot button, while holding boot hold down reset, let go boot then reset.
+To Enter USB Boot mode for the K1, hold the boot button, while holding boot hold down reset, let go reset then boot.
 
 ```./usbboot --cpu x2000 --stage1 ./spl.bin --wait 1 --stage2 ./uboot.bin```
 
@@ -22,4 +22,4 @@ The bootrom sets the stack pointer at 0xb2401000 (TCSM/SRAM), this is referenced
 Once SPL completes, the DRAM is initialized. At this point, uboot can be loaded into DRAM and executed at 0x80100000, this is referenced `CONFIG_SYS_TEXT_BASE` in the u-boot configurations.
 
 
-![k1 uboot](https://github.com/ballaswag/ingenic-usbboot/blob/main/uboot.png)
\ No newline at end of file
+![k1 uboot](https://github.com/ballaswag/ingenic-usbboot/blob/main/uboot.png)