# Ender-3V3 KE

[exclude_object]

[virtual_sdcard]
#path: /home/rock/gcode_files
path: /usr/data/printer_data/gcodes

[pause_resume]

[display_status]
[gcode_macro CANCEL_PRINT]
description: Cancel the actual running print
rename_existing: CANCEL_PRINT_BASE
gcode:
    TURN_OFF_HEATERS
    {% if "xyz" in printer.toolhead.homed_axes %}
    G91
    G1 Z2
    G90
    {% else %}
    {action_respond_info("Printer not homed")}
    G28 X Y
    {% endif %}
    G1 F3000X0Y222
    M104 S0
    M140 S0
    M107
    M84
    CANCEL_PRINT_BASE
    FINISH_INIT



[gcode_macro PRINT_CALIBRATION]
# This part of the command is replaced by the application side without passing parameters
gcode:
  CX_PRINT_LEVELING_CALIBRATION
  
[gcode_macro FIRST_FLOOR_PAUSE_POSITION]
gcode:
  {% set extruder_temp = printer.custom_macro.g28_ext_temp %}
  M104 S{extruder_temp}
  {% set y_park = printer.toolhead.axis_maximum.y/2 %}
  {% set x_park = printer['gcode_macro PRINTER_PARAM'].max_x_position|float %}
  G90
  G1 Z2 F600
  G1 X{x_park} Y{y_park} F6000
  G1 Z0.2 F600

[gcode_macro FIRST_FLOOR_RESUME]
description: Resume the first floor print
gcode:
    ##### read E from pause macro #####
  {% set E = printer["gcode_macro FIRST_FLOOR_PAUSE"].extrude|float + 1.0 %}
  #### get VELOCITY parameter if specified ####
  {% if 'VELOCITY' in params|upper %}
    {% set get_params = ('VELOCITY=' + params.VELOCITY) %}
  {%else %}
    {% set get_params = "" %}
  {% endif %}
  ##### end of definitions #####
  {% if printer.extruder.can_extrude|lower == 'true' %}
    G91
    G1 E{E} F2100
  {% else %}
    {action_respond_info("Extruder not hot enough")}
  {% endif %}
  RESUME_BASE {get_params}

[gcode_macro FIRST_FLOOR_PAUSE]
description: Pause the first floor print
# change this if you need more or less extrusion
variable_extrude: 2.0
gcode:
  ##### read E from pause macro #####
  {% set E = printer["gcode_macro FIRST_FLOOR_PAUSE"].extrude|float %}
  ##### set park positon for x and y #####
  # default is your max posion from your printer.cfg
  {% set y_park = printer.toolhead.axis_maximum.y/2 %}
  {% set x_park = printer.toolhead.axis_maximum.x|float - 10.0 %}
  ##### calculate save lift position #####
  {% set max_z = printer["gcode_macro PRINTER_PARAM"].max_z_position|float %}
  {% set act_z = printer.toolhead.position.z|float %}
  {% set z_safe = 0.0 %}
  {% if act_z < (max_z - 2.0) %}
    {% set z_safe = 2.0 %}
  {% elif act_z < max_z %}
    {% set z_safe = max_z - act_z %}
  {% endif %}
  ##### end of definitions #####
  SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=z_safe_pause VALUE={z_safe|float}
  PAUSE_BASE
  G91
  {% if "xyz" in printer.toolhead.homed_axes %}
    {% if printer.extruder.can_extrude|lower == 'true' %}
      G1 E-1.0 F180
      G1 E-{E} F4000
    {% else %}
      {action_respond_info("Extruder not hot enough")}
    {% endif %}
    G1 Z{z_safe} F600
    G90
    G1 X{x_park} Y{y_park} F30000
  {% else %}
    {action_respond_info("Printer not homed")}
  {% endif %}

[gcode_macro PAUSE]
description: Pause the actual running print
rename_existing: PAUSE_BASE
# change this if you need more or less extrusion
variable_extrude: 1.0
gcode:
    ##### read E from pause macro #####
    {% set E = printer["gcode_macro PAUSE"].extrude|float %}
    ##### set park positon for x and y #####
    # default is your max posion from your printer.cfg
    # {% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
    # {% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}

    {% set x_park = 0 %}
    {% set y_park = 222 %}
    ##### calculate save lift position #####
    {% set max_z = printer.toolhead.axis_maximum.z|float %}
    {% set act_z = printer.toolhead.position.z|float %}
    {% if act_z < 48.0 %}
        {% set z_safe = 50.0 - act_z %}
    {% elif act_z < (max_z - 2.0) %}
        {% set z_safe = 2.0 %}
    {% else %}
        {% set z_safe = max_z - act_z %}
    {% endif %}
    SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=z_safe_pause VALUE={z_safe|float}
    ##### end of definitions #####
    PAUSE_BASE
    G91
    SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=hotend_temp VALUE={printer.extruder.target}
    M104 S140
    {% if printer.extruder.can_extrude|lower == 'true' %}
      G1 E-{E} F2100
    {% else %}
      {action_respond_info("Extruder not hot enough")}
    {% endif %}
    {% if "xyz" in printer.toolhead.homed_axes %}
      G1 Z{z_safe} F600
      M400
      G90
      G1 X{x_park} Y{y_park} F6000
    {% else %}
      {action_respond_info("Printer not homed")}
    {% endif %} 
    
[gcode_macro RESUME]
description: Resume the actual running print
rename_existing: RESUME_BASE
gcode:
    {% if printer['gcode_macro PRINTER_PARAM'].hotend_temp|int != 0 %}
      {% if printer['gcode_macro PRINTER_PARAM'].hotend_temp|int > printer.extruder.temperature %}
        M109 S{printer['gcode_macro PRINTER_PARAM'].hotend_temp|int}
      {% else %}
        M104 S{printer['gcode_macro PRINTER_PARAM'].hotend_temp|int}
      {% endif %}
      SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=hotend_temp VALUE=0
    {% endif %}
    ##### read E from pause macro #####
    {% set E = printer["gcode_macro PAUSE"].extrude|float %}
    #### get VELOCITY parameter if specified ####
    {% if 'VELOCITY' in params|upper %}
      {% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
    {%else %}
      {% set get_params = "" %}
    {% endif %}
    {% set z_resume_move = printer['gcode_macro PRINTER_PARAM'].z_safe_pause|int %}
    {% if z_resume_move > 2 %}
      {% set z_resume_move = z_resume_move - 2 %}
      G91
      G1 Z-{z_resume_move} F600
      M400
    {% endif %}

    ##### end of definitions #####
    {% if printer.extruder.can_extrude|lower == 'true' %}
      G91
      G1 E{E} F2100
    {% else %}
      {action_respond_info("Extruder not hot enough")}
    {% endif %}  
    RESUME_BASE {get_params}


[gcode_macro PRINTER_PARAM]
variable_z_safe_pause: 0.0
variable_max_x_position: 220.0
variable_max_y_position: 220.0
variable_max_z_position: 240.0
variable_fans: 3
variable_auto_g29: 0
variable_default_bed_temp: 50
variable_default_extruder_temp: 240
variable_g28_extruder_temp: 140
variable_print_calibration: 0
variable_fan0_min: 140
variable_hotend_temp: 200
gcode:

[gcode_macro STRUCTURE_PARAM]
variable_bed_length: 220
variable_bed_width: 220
variable_bed_hight: 240
variable_laser_x_offset: 45.0
variable_laser_y_offset: -8.0
variable_laser_z_offset: 3.0
variable_cali_x_offset: 204.0
variable_cali_y_offset: 14.0
variable_cali_z_offset: 3.0
gcode:


[gcode_macro M900]
gcode:
  {% if 'K' in params %}
    {% if 'E' in params %}
      SET_PRESSURE_ADVANCE EXTRUDER={params.E} ADVANCE={params.K}
    {% else %}
      SET_PRESSURE_ADVANCE ADVANCE={params.K}
    {% endif %}
  {% endif %}

[gcode_arcs]#打印圆
resolution: 1.0

[gcode_macro M204]
rename_existing: M204.1
gcode:
  # {% if printer['gcode_macro Qmode'].flag|int == 0 %}
  {% set get_params = "" %}
  {% if 'S' in params|upper %}
    {% set get_params = (get_params + ' ' + 'S' + params.S) %}
  {% endif %}
  {% if 'P' in params|upper %}
    {% set get_params = (get_params + ' ' + 'P' + params.P) %}
  {% endif %}
  {% if 'T' in params|upper %}
    {% set get_params = (get_params + ' ' + 'T' + params.T) %}
  {% endif %}
  M204.1 {get_params}
  # {% endif %}

[gcode_macro M205]
gcode:
  {% if 'X' in params %}
    SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={params.X}
  {% elif 'Y' in params %}
    SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={params.Y}
  {% endif %}


[gcode_macro G29]
gcode:
  M204 S5000
  G90
  M104S0
  M107
  G28
  BED_MESH_CALIBRATE
  G1 X110Y110Z10
  M140S0
  CXSAVE_CONFIG

[gcode_macro INPUTSHAPER_X]
gcode:
  M84
  G90
  G28
  SHAPER_CALIBRATE AXIS=x
  CXSAVE_CONFIG 

[gcode_macro INPUTSHAPER_Y]
gcode:
  M84
  G90
  G28
  SHAPER_CALIBRATE AXIS=y
  CXSAVE_CONFIG 

[gcode_macro INPUTSHAPER]
gcode:
  G90
  {% if "xyz" not in printer.toolhead.homed_axes %}
    G28
  {% endif %}
  {% if 'X' in params.AXES|upper %}
    SHAPER_CALIBRATE AXIS=X
  {% elif 'Y' in params.AXES|upper %}
    SHAPER_CALIBRATE AXIS=Y
  {% else %}
    SHAPER_CALIBRATE
  {% endif %}
  CXSAVE_CONFIG

  
[gcode_macro AUTOTUNE_SHAPERS]
variable_autotune_shapers: 'mzv'
gcode:
  
[gcode_macro Z_OFFSET_TEST]
gcode:
  G28
  Z_OFFSET_CALIBRATION
  CXSAVE_CONFIG 

[gcode_macro ZZ_OFFSET_TEST]
gcode:
  G28
  Z_OFFSET_AUTO
  CXSAVE_CONFIG 

[gcode_macro Z_COMPENSATE_TEST]
gcode:
  G28
  CRTENSE_NOZZLE_CLEAR
  Z_OFFSET_CALIBRATION

[gcode_macro M106]
gcode:
  {% set fan = 0 %}
  {% set value = 255 %}
  {% if params.S is defined %}
    {% set tmp = params.S|int %}
    {% if tmp <= 255 %}
      {% set value = tmp %}
    {% endif %}
  {% endif %}
  {% if params.P is defined %}
    {% if params.P|int == 0 %}
        {% set value = printer["gcode_macro PRINTER_PARAM"].fan0_min + (255 - printer["gcode_macro PRINTER_PARAM"].fan0_min) / 255 * tmp %}
        {% if tmp < 1 %}
          {% set value = tmp %}
        {% endif %}
        SET_PIN PIN=fan0 VALUE={value}
    {% endif %}
  {% else %}
    {% set value = printer["gcode_macro PRINTER_PARAM"].fan0_min + (255 - printer["gcode_macro PRINTER_PARAM"].fan0_min) / 255 * tmp %}
    {% if tmp < 1 %}
      {% set value = tmp %}
    {% endif %}
    SET_PIN PIN=fan0 VALUE={value}
  {% endif %}

[gcode_macro M107]
gcode:
  {% if params.P is defined %}
    SET_PIN PIN=fan0 VALUE=0
  {% else %}
    SET_PIN PIN=fan0 VALUE=0
    # SET_PIN PIN=fan2 VALUE=0
  {% endif %}

[gcode_macro LOAD_MATERIAL]
gcode:
  SAVE_GCODE_STATE NAME=myMoveState
  M109 S{printer.custom_macro.default_extruder_temp}
  G91
  G1 E150 F180
  RESTORE_GCODE_STATE NAME=myMoveState

[gcode_macro QUIT_MATERIAL]
gcode:
  SAVE_GCODE_STATE NAME=myMoveState
  M109 S{printer.custom_macro.default_extruder_temp}
  G91
  G1 E20 F180
  G1 E-30 F180
  G1 E-50 F2000
  RESTORE_GCODE_STATE NAME=myMoveState

[gcode_macro M600]
gcode:
  PAUSE
  {% set act_e = printer.toolhead.position.e|float %}
  G91
  G1 E20 F180
  G1 E-30 F180
  G1 E-50 F2000
  G90
  G92 E{act_e}

[gcode_macro FINISH_INIT]
gcode:
  {% set extruder = printer.configfile.settings['extruder'] %}
  {% set printer = printer.configfile.settings['printer'] %}
  SET_PRESSURE_ADVANCE ADVANCE={extruder.pressure_advance}
  SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.max_accel_to_decel}
  #转角速度：5mm/s
  SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=5
  #加速度：5000mm/s²
  M204 S5000
  #减速加速度：5000mm/s²
  SET_VELOCITY_LIMIT ACCEL_TO_DECEL=5000
  #移动速率：100%
  M220 S100
  #挤出流量：100%
  M221 S100