Initial Profile Sources

profile_sources/non-prusa-fff/Anker/print/0.10 mm HIGHDETAIL (0.4 mm nozzle) @ANKER.ini

@@ -0,0 +1,4 @@
+[print:0.10 mm HIGHDETAIL (0.4 mm nozzle) @ANKER]
+inherits = *0.10mm*
+compatible_printers_condition = printer_notes=~/.*(MACHINE_M5_).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Anker/print/0.20 mm NORMAL (0.4 mm nozzle) @ANKER.ini

@@ -0,0 +1,5 @@
+[print:0.20 mm NORMAL (0.4 mm nozzle) @ANKER]
+inherits = *0.20mm*
+compatible_printers_condition = printer_notes=~/.*(MACHINE_M5_).*/ and nozzle_diameter[0]==0.4
+
+

profile_sources/non-prusa-fff/Anker/print/0.30 mm SUPERDRAFT (0.4 mm nozzle) @ANKER.ini

@@ -0,0 +1,4 @@
+[print:0.30 mm SUPERDRAFT (0.4 mm nozzle) @ANKER]
+inherits = *0.30mm*
+compatible_printers_condition = printer_notes=~/.*(MACHINE_M5_).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Anker/print/Fast - M5C (0.4 mm nozzle) @ANKER.ini

@@ -0,0 +1,48 @@
+[print:Fast - M5C (0.4 mm nozzle) @ANKER]
+inherits = *common-M5C*
+notes = PRINT_COMPATIBLE\n P_FAST\n F_PLA__Basic\n
+compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_FAST).*/ and nozzle_diameter[0]==0.4
+layer_height = 0.25
+first_layer_height = 0.14
+perimeters = 2
+top_solid_layers = 4
+bottom_solid_layers = 3
+external_perimeter_acceleration = 3000
+perimeter_acceleration = 5000
+top_solid_infill_acceleration = 4000
+solid_infill_acceleration = 4000
+infill_acceleration = 5000
+bridge_acceleration = 500
+first_layer_acceleration = 2500
+first_layer_acceleration_over_raft = 0
+travel_acceleration = 5000
+default_acceleration = 5000
+# Speed
+perimeter_speed = 250
+small_perimeter_speed = 75
+external_perimeter_speed = 150
+infill_speed = 270
+solid_infill_speed = 100
+top_solid_infill_speed = 100
+support_material_speed = 150
+support_material_interface_speed = 100%
+bridge_speed = 20
+gap_fill_speed = 75
+overhang_speed_0 = 15
+overhang_speed_1 = 20
+overhang_speed_2 = 30
+overhang_speed_3 = 30
+travel_speed = 500
+travel_speed_z = 10
+first_layer_speed = 50
+first_layer_speed_over_raft = 30
+max_print_speed = 500
+
+# When submitting new filaments please print the following temperature tower at 0.1mm layer height:
+#   https://www.thingiverse.com/thing:2615842
+# Pay particular attention to bridging, overhangs and retractions.
+# Also print the following bed adhesion test at 0.1 layer height as well:
+#   https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
+# At least for PLA, please keep bed temp at 60, as many Creality printers do not have any ABL
+# So having some leeway to get good bed adhesion is not a luxury for many users
+

profile_sources/non-prusa-fff/Anker/print/Normal - M5C (0.4 mm nozzle) @ANKER.ini

@@ -0,0 +1,35 @@
+[print:Normal - M5C (0.4 mm nozzle) @ANKER]
+inherits = *common-M5C*
+notes = PRINT_COMPATIBLE\n P_NORMAL\n F_PLA__Basic\n
+compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_NORMAL).*/ and nozzle_diameter[0]==0.4
+first_layer_height = 0.14
+layer_height = 0.2
+top_solid_layers = 4
+bottom_solid_layers = 4
+perimeters = 3
+bridge_acceleration = 500
+default_acceleration = 2500
+external_perimeter_acceleration = 2500
+external_perimeter_speed = 150
+first_layer_acceleration = 2500
+first_layer_acceleration_over_raft = 0
+first_layer_speed = 50
+gap_fill_speed = 75
+infill_acceleration = 2500
+infill_speed = 250
+max_print_speed = 250
+overhang_speed_0 = 15
+overhang_speed_1 = 20
+overhang_speed_2 = 30
+overhang_speed_3 = 30
+perimeter_acceleration = 2500
+perimeter_speed = 250
+small_perimeter_speed = 75
+solid_infill_acceleration = 2500
+solid_infill_speed = 150
+top_solid_infill_acceleration = 2500
+top_solid_infill_speed = 150
+travel_acceleration = 2500
+travel_speed = 250
+travel_speed_z = 10
+

profile_sources/non-prusa-fff/Anker/print/Precision - M5C (0.4 mm nozzle) @ANKER.ini

@@ -0,0 +1,16 @@
+[print:Precision - M5C (0.4 mm nozzle) @ANKER]
+inherits = *common-M5C*
+compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_PRECISION).*/ and nozzle_diameter[0]==0.4
+first_layer_height = 0.14
+layer_height = 0.16
+top_solid_layers = 5
+bottom_solid_layers = 3
+perimeters = 2
+bridge_acceleration = 500
+default_acceleration = 4000
+external_perimeter_acceleration = 3000
+perimeter_acceleration = 3000
+top_solid_infill_acceleration = 2500
+travel_acceleration = 4000
+solid_infill_acceleration = 2500
+

profile_sources/non-prusa-fff/Anker/print/_0.10mm_.ini

@@ -0,0 +1,8 @@
+[print:*0.10mm*]
+inherits = *common*
+layer_height = 0.10
+first_layer_height = 0.10
+bottom_solid_layers = 7
+top_solid_layers = 9
+bridge_flow_ratio = 1
+

profile_sources/non-prusa-fff/Anker/print/_0.20mm_.ini

@@ -0,0 +1,7 @@
+[print:*0.20mm*]
+inherits = *common*
+layer_height = 0.20
+first_layer_height = 0.14
+bottom_solid_layers = 4
+top_solid_layers = 5
+

profile_sources/non-prusa-fff/Anker/print/_0.30mm_.ini

@@ -0,0 +1,8 @@
+[print:*0.30mm*]
+inherits = *common*
+layer_height = 0.30
+first_layer_height = 0.21
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+

profile_sources/non-prusa-fff/Anker/print/_common-M5C_.ini

@@ -0,0 +1,156 @@
+[print:*common-M5C*]
+avoid_crossing_curled_overhangs = 0
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.8
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 30
+brim_separation = 0.1
+brim_type = no_brim
+brim_width = 8
+complete_objects = 0
+dont_support_bridges = 1
+draft_shield = disabled
+elefant_foot_compensation = 0
+enable_dynamic_overhang_speeds = 1
+external_perimeter_extrusion_width = 0.44
+external_perimeter_speed = 75
+external_perimeters_first = 1
+extra_perimeters = 1
+extra_perimeters_on_overhangs = 0
+extrusion_width = 0.4
+fill_angle = 45
+fill_density = 10%
+fill_pattern = grid
+first_layer_acceleration = 2500
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0.5
+first_layer_speed = 50
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 75
+gcode_comments = 0
+gcode_label_objects = 0
+gcode_resolution = 0.0125
+gcode_substitutions = "(G28 ;Home.*$)";"${1}\\nM4899 T3\\n";;";S-Curve"
+infill_acceleration = 4000
+infill_anchor = 30
+infill_anchor_max = 60
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.4
+infill_first = 0
+infill_overlap = 25%
+infill_speed = 250
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+max_print_speed = 500
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_bead_width = 85%
+min_feature_size = 25%
+min_skirt_length = 0
+mmu_segmented_region_max_width = 0
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}.gcode
+overhang_speed_0 = 25
+overhang_speed_1 = 55
+overhang_speed_2 = 55
+overhang_speed_3 = 100%
+overhangs = 1
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.4
+perimeter_generator = classic
+perimeter_speed = 200
+post_process = 
+print_settings_id = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 0
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 75
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.4
+solid_infill_speed = 100
+spiral_vase = 0
+staggered_inner_seams = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 90
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.3
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 0
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.333
+support_material_speed = 150
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 30
+support_material_with_sheath = 0
+support_material_xy_spacing = 0.8
+support_tree_angle = 40
+support_tree_angle_slow = 25
+support_tree_branch_diameter = 2
+support_tree_branch_diameter_angle = 5
+support_tree_branch_distance = 1
+support_tree_tip_diameter = 0.8
+support_tree_top_rate = 15%
+thick_bridges = 0
+thin_walls = 1
+threads = 10
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 50
+top_solid_min_thickness = 0.8
+travel_speed = 500
+travel_speed_z = 10
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_cone_angle = 0
+wipe_tower_extra_spacing = 100%
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+

profile_sources/non-prusa-fff/Anker/print/_common_.ini

@@ -0,0 +1,111 @@
+[print:*common*]
+avoid_crossing_perimeters = 0
+bridge_acceleration = 2500
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 50
+brim_separation = 0.1
+brim_type = outer_only
+brim_width = 0
+clip_multipart_objects = 1
+complete_objects = 0
+default_acceleration = 2500
+dont_support_bridges = 1
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_speed = 150
+external_perimeters_first = 0
+extra_perimeters = 0
+extrusion_width = 0.4
+external_perimeter_extrusion_width = 0.44
+
+fill_angle = 45
+fill_density = 10%
+fill_pattern = grid
+first_layer_acceleration = 2500
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0.4
+first_layer_speed = 50%
+first_layer_speed_over_raft = 30
+gap_fill_enabled = 1
+gap_fill_speed = 150
+gcode_comments = 0
+infill_acceleration = 2500
+infill_anchor = 2.5
+infill_anchor_max = 12
+infill_every_layers = 1
+infill_extruder = 1
+infill_first = 0
+infill_extrusion_width = 0.4
+infill_only_where_needed = 0
+infill_overlap = 10%
+infill_speed = 250
+interface_shells = 0
+max_print_speed = 250
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}.gcode
+overhangs = 1
+perimeter_acceleration = 2500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.4
+perimeter_generator = classic
+perimeter_speed = 250
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0.01
+seam_position = aligned
+single_extruder_multi_material_priming = 0
+skirt_distance = 3
+skirt_height = 1
+skirts = 3
+small_perimeter_speed = 150
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.4
+solid_infill_speed = 250
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material_auto = 0
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 80%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 150
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thick_bridges = 0
+thin_walls = 0
+top_solid_infill_speed = 150
+top_infill_extrusion_width = 0.4
+top_fill_pattern = rectilinear
+bottom_fill_pattern = rectilinear
+travel_speed = 250
+travel_speed_z = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+xy_size_compensation = 0
+