Initial Profile Sources

2026-10-01 18:17:21 +00:00 · 2026-03-19 01:54:47 +00:00
parent 7e2e8f9d47
commit 1f7873734a
13374 changed files with 256890 additions and 0 deletions
@@ -0,0 +1,48 @@
+[print:Fast - M5C (0.4 mm nozzle) @ANKER]
+inherits = *common-M5C*
+notes = PRINT_COMPATIBLE\n P_FAST\n F_PLA__Basic\n
+compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_FAST).*/ and nozzle_diameter[0]==0.4
+layer_height = 0.25
+first_layer_height = 0.14
+perimeters = 2
+top_solid_layers = 4
+bottom_solid_layers = 3
+external_perimeter_acceleration = 3000
+perimeter_acceleration = 5000
+top_solid_infill_acceleration = 4000
+solid_infill_acceleration = 4000
+infill_acceleration = 5000
+bridge_acceleration = 500
+first_layer_acceleration = 2500
+first_layer_acceleration_over_raft = 0
+travel_acceleration = 5000
+default_acceleration = 5000
+# Speed
+perimeter_speed = 250
+small_perimeter_speed = 75
+external_perimeter_speed = 150
+infill_speed = 270
+solid_infill_speed = 100
+top_solid_infill_speed = 100
+support_material_speed = 150
+support_material_interface_speed = 100%
+bridge_speed = 20
+gap_fill_speed = 75
+overhang_speed_0 = 15
+overhang_speed_1 = 20
+overhang_speed_2 = 30
+overhang_speed_3 = 30
+travel_speed = 500
+travel_speed_z = 10
+first_layer_speed = 50
+first_layer_speed_over_raft = 30
+max_print_speed = 500
+
+# When submitting new filaments please print the following temperature tower at 0.1mm layer height:
+#   https://www.thingiverse.com/thing:2615842
+# Pay particular attention to bridging, overhangs and retractions.
+# Also print the following bed adhesion test at 0.1 layer height as well:
+#   https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
+# At least for PLA, please keep bed temp at 60, as many Creality printers do not have any ABL
+# So having some leeway to get good bed adhesion is not a luxury for many users
+