Initial Profile Sources

profile_sources/non-prusa-fff/Anker/printer/AnkerMake M5 (0.4 mm nozzle).ini

@@ -0,0 +1,8 @@
+[printer:AnkerMake M5 (0.4 mm nozzle)]
+inherits = *M5*
+nozzle_diameter = 0.4
+printer_variant = 0.4
+min_layer_height = 0.08
+max_layer_height = 0.32
+retract_lift_above = 0
+default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER

profile_sources/non-prusa-fff/Anker/printer/AnkerMake M5C (0.4 mm nozzle).ini

@@ -0,0 +1,8 @@
+[printer:AnkerMake M5C (0.4 mm nozzle)]
+inherits = *M5C*
+nozzle_diameter = 0.4
+printer_variant = 0.4
+min_layer_height = 0.08
+max_layer_height = 0.32
+retract_lift_above = 0
+default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER

profile_sources/non-prusa-fff/Anker/printer/_M5C_.ini

@@ -0,0 +1,14 @@
+[printer:*M5C*]
+inherits = *common*
+bed_shape = 0x0,220x0,220x220,0x220
+max_print_height = 250
+printer_model = M5C
+retract_length = 0.8
+retract_speed = 60
+deretract_speed = 60
+retract_before_travel = 3
+retract_before_wipe = 0%
+wipe = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+printer_notes = MACHINE_M5C_\n PRINTER_VENDOR_ANKERMAKE\n P_PRECISION P_NORMAL P_FAST\n

profile_sources/non-prusa-fff/Anker/printer/_M5_.ini

@@ -0,0 +1,13 @@
+[printer:*M5*]
+inherits = *common*
+bed_shape = 0x0,235-0,235x235,0x235
+max_print_height = 250
+printer_model = M5
+retract_length = 3
+retract_speed = 60
+deretract_speed = 60
+retract_before_travel = 3
+retract_before_wipe = 0%
+extruder_clearance_height = 30
+extruder_clearance_radius = 45
+printer_notes = MACHINE_M5_\n PRINTER_VENDOR_ANKERMAKE\n PRINTER_MODEL_M5\n

profile_sources/non-prusa-fff/Anker/printer/_common_.ini

@@ -0,0 +1,86 @@
+[printer:*common*]
+printer_vendor = AnkerMake
+# General
+## Size and coordinates
+max_print_height = 250
+z_offset = 0
+## Capabilities
+#extruders_count = 1
+single_extruder_multi_material = 0
+## Firmware
+gcode_flavor = marlin2
+thumbnails = 256x256
+thumbnails_format = PNG
+silent_mode = 0
+remaining_times = 1
+## Advanced
+use_relative_e_distances = 1
+use_firmware_retraction = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+# Custom G-code
+start_gcode = M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG28 ;Home\n;LAYER_COUNT:{total_layer_count}\n
+autoemit_temperature_commands = 1
+end_gcode = M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}\n;LAYER:{layer_num+1}
+layer_gcode = ;AFTER_LAYER_CHANGE\nG92 E0
+toolchange_gcode = 
+between_objects_gcode = 
+color_change_gcode = M600
+pause_print_gcode = M601
+template_custom_gcode = 
+# Machine limits
+## General
+### machine_limits_usage = emit_to_gcode  time_estimate_only  ignore
+machine_limits_usage = time_estimate_only
+## Maximum feedrates
+machine_max_feedrate_e = 100
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 50
+## Maximum accelerations
+machine_max_acceleration_e = 10000
+machine_max_acceleration_extruding = 10000
+machine_max_acceleration_retracting = 10000
+machine_max_acceleration_travel = 10000
+machine_max_acceleration_x = 10000
+machine_max_acceleration_y = 10000
+machine_max_acceleration_z = 10000
+## Jerk limits
+machine_max_jerk_x = 15, 15
+machine_max_jerk_y = 15, 15
+machine_max_jerk_z = 0.3, 0.3
+machine_max_jerk_e = 3, 3
+machine_min_extruding_rate = 0, 0
+machine_min_travel_rate = 0, 0
+# Extruder 1 2 3 4 5 6
+## Size
+nozzle_diameter = 0.4
+## Preview
+extruder_colour = #9BE198
+## Layer height limits
+min_layer_height = 0.08
+max_layer_height = 0.32
+## Position (for multi-extruder printers)
+extruder_offset = 0x0
+## Retraction
+retract_length = 3
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_speed = 60
+deretract_speed = 0
+retract_restart_extra = 0
+retract_before_travel = 0.8
+retract_layer_change = 1
+wipe = 0
+retract_before_wipe = 0%
+## Retraction when tool is disabled (advanced settings for multi-extruder setups)
+retract_length_toolchange = 4
+retract_restart_extra_toolchange = 0
+# Notes
+printer_notes = Base printer notes is EMPTY!
+default_print_profile = 
+default_filament_profile = Generic PLA+ @ANKER
+printer_technology = FFF
+printer_settings_id =