Initial Profile Sources

profile_sources/non-prusa-fff/Anycubic/print/_common_4max_.ini

@@ -0,0 +1,137 @@
+[print:*common_4max*]
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 4
+bridge_acceleration = 300
+bridge_angle = 0
+bridge_flow_ratio = 0.65
+bridge_speed = 30
+brim_separation = 0
+brim_type = outer_only
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers_condition = printer_model=="4MAXPRO20" and nozzle_diameter[0]==0.4
+complete_objects = 0
+default_acceleration = 900
+dont_support_bridges = 1
+draft_shield = disabled
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = gyroid
+first_layer_acceleration = 300
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+gcode_resolution = 0.0125
+infill_acceleration = 600
+infill_anchor = 400%
+infill_anchor_max = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 23%
+infill_speed = 45
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 50
+max_volumetric_speed = 0
+min_skirt_length = 0
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{print_time}.gcode
+overhangs = 1
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 45
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirt_distance = 5
+skirt_height = 1
+skirts = 2
+slicing_mode = regular
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 45
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 1
+support_material_closing_radius = 2
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.4
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 30
+support_material_pattern = rectilinear-grid
+support_material_spacing = 2.5
+support_material_speed = 45
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 1
+support_material_xy_spacing = 60%
+thick_bridges = 1
+thin_walls = 0
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 30
+top_solid_layers = 5
+travel_speed = 60
+travel_speed_z = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+