Initial Profile Sources

profile_sources/non-prusa-fff/Anycubic/print/_common_mega_.ini

@@ -0,0 +1,61 @@
+[print:*common_mega*]
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/  and nozzle_diameter[0]==0.4
+default_acceleration = 1000
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 40
+extrusion_width = 0.45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 800
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 1
+infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+max_print_speed = 100
+min_skirt_length = 4
+only_retract_when_crossing_perimeters = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.45
+perimeter_speed = 50
+perimeters = 2
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 50
+support_material = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.1
+support_material_extrusion_width = 0.35
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 80%
+support_material_spacing = 2
+support_material_speed = 50
+support_material_threshold = 50
+support_material_xy_spacing = 60%
+thin_walls = 0
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+top_solid_min_thickness = 0.7
+travel_speed = 180
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.15mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+