mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-10-01 18:17:21 +00:00
Initial Profile Sources
This commit is contained in:
Dark98
@@ -0,0 +1,56 @@
|
||||
[printer:Anycubic 4Max Pro 2.0]
|
||||
printer_model = 4MAXPRO20
|
||||
printer_variant = 0.4
|
||||
printer_technology = FFF
|
||||
bed_shape = 0x0,270x0,270x210,0x210
|
||||
color_change_gcode = M600
|
||||
default_filament_profile = Generic PLA @4Max Pro 2.0
|
||||
default_print_profile = 0.20mm Quality @4Max Pro 2.0
|
||||
deretract_speed = 25
|
||||
end_gcode = M104 S0 ; turn off extruder heating\nM140 S0 ; turn off bed heating\nM107 ; turn off fans\nG91 ; relative positioning\nG0 Z+0.5 ; move Z up a tiny bit\nG90 ; absolute positioning\nG0 X135 Y105 F{machine_max_feedrate_x[0]*60} ; move extruder to center position\nG0 Z190.5 F{machine_max_feedrate_z[0]*60} ; lower the plattform to Z min\nM84 ; steppers off\nG90 ; absolute positioning\n
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
machine_limits_usage = time_estimate_only
|
||||
machine_max_acceleration_e = 5000
|
||||
machine_max_acceleration_extruding = 1250
|
||||
machine_max_acceleration_retracting = 1250
|
||||
machine_max_acceleration_travel = 1500
|
||||
machine_max_acceleration_x = 900
|
||||
machine_max_acceleration_y = 900
|
||||
machine_max_acceleration_z = 100
|
||||
machine_max_feedrate_e = 120
|
||||
machine_max_feedrate_x = 200
|
||||
machine_max_feedrate_y = 200
|
||||
machine_max_feedrate_z = 16
|
||||
machine_max_jerk_e = 5
|
||||
machine_max_jerk_x = 6
|
||||
machine_max_jerk_y = 6
|
||||
machine_max_jerk_z = 0.2
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
max_layer_height = 0.3
|
||||
max_print_height = 190
|
||||
min_layer_height = 0.07
|
||||
nozzle_diameter = 0.4
|
||||
pause_print_gcode = M601
|
||||
remaining_times = 0
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 1
|
||||
retract_length = 2.5
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 35
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 X0 Y0 ; home X and Y\nG28 Z0 ; home Z\nG1 Z30 F{machine_max_feedrate_z[0]*60} ; move Z a bit down to not blow on the bed edge while heating\nG1 X10 F3900 ; let some space on x to prevent the filament cooling exhaust from beeing blocked by the servo motor\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM106 S80 ; turn on fan to prevent air nozzle melt while heating up\nM109 S[first_layer_temperature] ; wait for extruder temp\nM107 ; start with the fan off\nG28 X0 ; goto X home again\nG92 E0 ; zero the extruded length\nG1 Z0.2 F360 ; move plattform upwards\n; extrude material next to the plattform (comment or remove following lines to disable)\nG1 F180 E20 ; extrude some material next to the plattform\nG92 E0 ; zero the extruded length\nG1 E-[retract_length] F{retract_speed[0]*60} ; do a filament retract\nG92 E0 ; zero the extruded length again\nG1 X5 F3900 ; move sideways to get rid of that string\nG1 E[retract_length] F{retract_speed[0]*60} ; do a filament deretract with retract parameters\nG92 E0 ; zero the extruded length again\n; draw intro line (comment or remove following lines to disable)\nG1 X30 E5 F700 ; draw intro line\nG92 E0 ; zero the extruded length\nG1 E-[retract_length] F{retract_speed[0]*60} ; do a filament retract\nG1 X40 Z2.0 ; move away from the introline\nG92 E0 ; zero the extruded length again\nG1 E[retract_length] F{retract_speed[0]*60} ; do a filament deretract with retract parameters\n; end of intro line code\nM117 Printing...\nG5
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:Anycubic Kossel Linear Plus]
|
||||
inherits = *common_akossel*
|
||||
printer_model = AKLP
|
||||
printer_variant = 0.4
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Anycubic\nPRINTER_MODEL_AKLP\nPRINTER_HAS_BOWDEN\n
|
||||
bed_shape = 114.562x10.0229,113.253x19.9695,111.081x29.7642,108.065x39.3323,104.225x48.6011,99.5929x57.5,94.2025x65.9613,88.0951x73.9206,81.3173x81.3173,73.9206x88.0951,65.9613x94.2025,57.5x99.5929,48.6011x104.225,39.3323x108.065,29.7642x111.081,19.9695x113.253,10.0229x114.562,7.04172e-15x115,-10.0229x114.562,-19.9695x113.253,-29.7642x111.081,-39.3323x108.065,-48.6011x104.225,-57.5x99.5929,-65.9613x94.2025,-73.9206x88.0951,-81.3173x81.3173,-88.0951x73.9206,-94.2025x65.9613,-99.5929x57.5,-104.225x48.6011,-108.065x39.3323,-111.081x29.7642,-113.253x19.9695,-114.562x10.0229,-115x1.40834e-14,-114.562x-10.0229,-113.253x-19.9695,-111.081x-29.7642,-108.065x-39.3323,-104.225x-48.6011,-99.5929x-57.5,-94.2025x-65.9613,-88.0951x-73.9206,-81.3173x-81.3173,-73.9206x-88.0951,-65.9613x-94.2025,-57.5x-99.5929,-48.6011x-104.225,-39.3323x-108.065,-29.7642x-111.081,-19.9695x-113.253,-10.0229x-114.562,-2.11252e-14x-115,10.0229x-114.562,19.9695x-113.253,29.7642x-111.081,39.3323x-108.065,48.6011x-104.225,57.5x-99.5929,65.9613x-94.2025,73.9206x-88.0951,81.3173x-81.3173,88.0951x-73.9206,94.2025x-65.9613,99.5929x-57.5,104.225x-48.6011,108.065x-39.3323,111.081x-29.7642,113.253x-19.9695,114.562x-10.0229,115x-2.81669e-14
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home\nG1 X-54.672 Y95.203 Z0.3 F9000\nG92 E0.0\nG1 F1000\nG1 X-52.931 Y96.185 E0.300\nG1 X-50.985 Y97.231 E0.331\nG1 X-49.018 Y98.238 E0.331\nG1 X-47.032 Y99.205 E0.331\nG1 X-45.026 Y100.132 E0.331\nG1 X-43.003 Y101.019 E0.331\nG1 X-40.961 Y101.864 E0.331\nG1 X-38.904 Y102.668 E0.331\nG1 X-36.83 Y103.431 E0.331\nG1 X-34.742 Y104.152 E0.331\nG1 X-32.639 Y104.83 E0.331\nG1 X-30.523 Y105.466 E0.331\nG1 X-28.395 Y106.06 E0.331\nG1 X-26.255 Y106.61 E0.331\nG1 X-24.105 Y107.117 E0.331\nG1 X-21.945 Y107.581 E0.331\nG1 X-19.776 Y108.001 E0.331\nG1 X-17.599 Y108.377 E0.331\nG1 X-15.415 Y108.71 E0.331\nG1 X-13.224 Y108.998 E0.331\nG1 X-11.028 Y109.242 E0.331\nG1 X-8.828 Y109.442 E0.331\nG1 X-6.624 Y109.598 E0.331\nG1 X-4.418 Y109.709 E0.331\nG1 X-2.209 Y109.776 E0.332\nG1 X0 Y109.798 E0.331\nG1 X2.209 Y109.776 E0.690\nG1 X4.418 Y109.709 E0.691\nG1 X6.624 Y109.598 E0.690\nG1 X8.828 Y109.442 E0.690\nG1 X11.028 Y109.242 E0.690\nG1 X13.224 Y108.998 E0.690\nG1 X15.415 Y108.71 E0.691\nG1 X17.599 Y108.377 E0.690\nG1 X19.776 Y108.001 E0.690\nG1 X21.945 Y107.581 E0.690\nG1 X24.105 Y107.117 E0.690\nG1 X26.255 Y106.61 E0.690\nG1 X28.395 Y106.06 E0.690\nG1 X30.523 Y105.466 E0.690\nG1 X32.639 Y104.83 E0.690\nG1 X34.742 Y104.152 E0.690\nG1 X36.83 Y103.431 E0.690\nG1 X38.904 Y102.668 E0.691\nG1 X40.961 Y101.864 E0.690\nG1 X43.003 Y101.019 E0.691\nG1 X45.026 Y100.132 E0.690\nG1 X47.032 Y99.205 E0.691\nG1 X49.018 Y98.238 E0.690\nG1 X50.985 Y97.231 E0.691\nG1 X52.931 Y96.185 E0.690\nG1 X54.672 Y95.203 E0.625\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y96.185 F1000 ; wipe\nG1 X50.985 Y97.231 F1000 ; wipe\nG1 X49.018 Y98.238 F1000 ; wipe\nG1 X0 Y109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\nM221 S{if layer_height<0.075}100{else}95{endif}
|
||||
|
||||
@@ -0,0 +1,13 @@
|
||||
[printer:Anycubic Kossel Pulley (Linear)]
|
||||
inherits = *common_akossel*
|
||||
printer_model = AK
|
||||
printer_variant = 0.4
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Anycubic\nPRINTER_MODEL_AK\nPRINTER_HAS_BOWDEN\n
|
||||
bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home\nG1 X-39.672 Y69.712 Z0.3 F9000\nG92 E0.0\nG1 F1000\nG1 X-38.457 Y70.397 E0.209\nG1 X-37.043 Y71.157 E0.241\nG1 X-35.614 Y71.889 E0.241\nG1 X-34.171 Y72.591 E0.241\nG1 X-32.714 Y73.265 E0.241\nG1 X-31.244 Y73.909 E0.241\nG1 X-29.761 Y74.523 E0.241\nG1 X-28.266 Y75.108 E0.241\nG1 X-26.759 Y75.662 E0.241\nG1 X-25.242 Y76.185 E0.241\nG1 X-23.714 Y76.678 E0.241\nG1 X-22.177 Y77.14 E0.241\nG1 X-20.63 Y77.571 E0.241\nG1 X-19.076 Y77.971 E0.241\nG1 X-17.514 Y78.34 E0.241\nG1 X-15.944 Y78.677 E0.241\nG1 X-14.368 Y78.982 E0.241\nG1 X-12.786 Y79.255 E0.241\nG1 X-11.199 Y79.497 E0.241\nG1 X-9.608 Y79.706 E0.241\nG1 X-8.013 Y79.884 E0.241\nG1 X-6.414 Y80.029 E0.241\nG1 X-4.813 Y80.142 E0.241\nG1 X-3.21 Y80.223 E0.241\nG1 X-1.605 Y80.271 E0.241\nG1 X0 Y80.287 E0.241\nG1 X1.605 Y80.271 E0.502\nG1 X3.21 Y80.223 E0.502\nG1 X4.813 Y80.142 E0.502\nG1 X6.414 Y80.029 E0.502\nG1 X8.013 Y79.884 E0.502\nG1 X9.608 Y79.706 E0.502\nG1 X11.199 Y79.497 E0.501\nG1 X12.786 Y79.255 E0.502\nG1 X14.368 Y78.982 E0.502\nG1 X15.944 Y78.677 E0.502\nG1 X17.514 Y78.34 E0.502\nG1 X19.076 Y77.971 E0.502\nG1 X20.63 Y77.571 E0.501\nG1 X22.177 Y77.14 E0.502\nG1 X23.714 Y76.678 E0.502\nG1 X25.242 Y76.185 E0.502\nG1 X26.759 Y75.662 E0.501\nG1 X28.266 Y75.108 E0.502\nG1 X29.761 Y74.523 E0.502\nG1 X31.244 Y73.909 E0.502\nG1 X32.714 Y73.265 E0.502\nG1 X34.171 Y72.591 E0.502\nG1 X35.614 Y71.889 E0.501\nG1 X37.043 Y71.157 E0.502\nG1 X38.457 Y70.397 E0.502\nG1 X39.672 Y69.712 E0.436\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
||||
|
||||
## Anycubic MEGA ZERO
|
||||
## Author: https://github.com/kad
|
||||
## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4057
|
||||
|
||||
# Common print preset
|
||||
@@ -0,0 +1,42 @@
|
||||
[printer:Anycubic Mega Zero]
|
||||
inherits = *common_mega0*
|
||||
printer_model = MEGA0
|
||||
printer_variant = 0.4
|
||||
max_layer_height = 0.3
|
||||
min_layer_height = 0.1
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_MEGA0
|
||||
bed_shape = 0x0,220x0,220x220,0x220
|
||||
max_print_height = 250
|
||||
machine_max_acceleration_e = 5000
|
||||
machine_max_acceleration_extruding = 500
|
||||
machine_max_acceleration_retracting = 500
|
||||
machine_max_acceleration_x = 500
|
||||
machine_max_acceleration_y = 500
|
||||
machine_max_acceleration_z = 100
|
||||
machine_max_feedrate_e = 25
|
||||
machine_max_feedrate_x = 500
|
||||
machine_max_feedrate_y = 500
|
||||
machine_max_feedrate_z = 5
|
||||
machine_max_jerk_e = 5
|
||||
machine_max_jerk_x = 10
|
||||
machine_max_jerk_y = 10
|
||||
machine_max_jerk_z = 0.4
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
nozzle_diameter = 0.4
|
||||
retract_before_travel = 2
|
||||
retract_layer_change = 0
|
||||
retract_length = 7
|
||||
retract_speed = 30
|
||||
retract_lift = 0.2
|
||||
deretract_speed = 30
|
||||
retract_before_wipe = 70%
|
||||
default_print_profile = 0.20mm NORMAL @MEGA0
|
||||
default_filament_profile = Anycubic PLA @MEGA0
|
||||
start_gcode = G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM117 Homing X/Y ...\nG28 X0 Y0 ;move X/Y to min endstops\nM117 Homing Z ...\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F240 ;move the platform down 15mm\nM117 Heating ...\nM104 S[first_layer_temperature]\n ; set extruder temp\nM109 S[first_layer_temperature]\n ; wait for extruder temp\nM117 Start cleaning ...\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nM117 Intro line ...\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z[first_layer_height] F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z[first_layer_height] F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z[first_layer_height] F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3[first_layer_height] F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 E-1 F500 ; Retract filiment by 1 mm\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F240 ; Move over to prevent blob squish\nG92 E0 ; Reset Extruder\nM117 Printing...\n
|
||||
end_gcode = M117 Cooling down...\nM104 S0 ; turn off extruder\nM107 ; Fan off\nM84 ; disable motors\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F240 ;move Z up a bit and retract filament even more\nG28 X0 ;move X to min endstops, so the head is out of the way\nG90 ;Absolute positionning\nG1 Y200 F3000 ;Present print\nM84 ;steppers off\nM300 P300 S4000\nM117 Finished.\n
|
||||
|
||||
## Anycubic i3 Mega and i3 Mega S
|
||||
## Author: https://github.com/Igami
|
||||
## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4619
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:Anycubic Predator 0.4 nozzle]
|
||||
inherits = *common predator*
|
||||
printer_model = PREDATOR
|
||||
printer_variant = 0.4
|
||||
nozzle_diameter = 0.4
|
||||
min_layer_height = 0.08
|
||||
max_layer_height = 0.32
|
||||
default_print_profile = 0.16mm 0.4 nozzle DETAILED QUALITY @PREDATOR
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:Anycubic Predator 0.6 nozzle]
|
||||
inherits = *common predator*
|
||||
printer_model = PREDATOR
|
||||
printer_variant = 0.6
|
||||
nozzle_diameter = 0.6
|
||||
min_layer_height = 0.12
|
||||
max_layer_height = 0.4
|
||||
default_print_profile = 0.24mm 0.8 nozzle DETAILED QUALITY @PREDATOR
|
||||
|
||||
@@ -0,0 +1,12 @@
|
||||
[printer:Anycubic Predator 0.8 nozzle]
|
||||
inherits = *common predator*
|
||||
printer_model = PREDATOR
|
||||
printer_variant = 0.8
|
||||
nozzle_diameter = 0.8
|
||||
min_layer_height = 0.16
|
||||
max_layer_height = 0.48
|
||||
default_print_profile = 0.24mm 0.8 nozzle DETAILED QUALITY @PREDATOR
|
||||
|
||||
## Anycubic 4MAX Pro 2.0
|
||||
## based on https://hartrusion.com/en/prusaslicer-config-for-anycubic-4max-pro-2-0/
|
||||
|
||||
@@ -0,0 +1,18 @@
|
||||
[printer:Anycubic i3 Mega S]
|
||||
inherits = *common_mega*
|
||||
printer_model = I3MEGAS
|
||||
printer_variant = 0.4
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_I3_MEGA_S\nPRINTER_HAS_BOWDEN
|
||||
machine_max_feedrate_e = 30
|
||||
machine_max_feedrate_z = 8
|
||||
|
||||
|
||||
## Anycubic PREDATOR
|
||||
## Author: https://github.com/tillverka3d
|
||||
## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4960
|
||||
|
||||
#########################################
|
||||
###### begin common print presets #######
|
||||
#########################################
|
||||
|
||||
# Common print preset
|
||||
@@ -0,0 +1,6 @@
|
||||
[printer:Anycubic i3 Mega]
|
||||
inherits = *common_mega*
|
||||
printer_model = I3MEGA
|
||||
printer_variant = 0.4
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_I3_MEGA\nPRINTER_HAS_BOWDEN
|
||||
|
||||
File diff suppressed because one or more lines are too long
@@ -0,0 +1,60 @@
|
||||
[printer:*common_akossel*]
|
||||
printer_technology = FFF
|
||||
bed_shape =
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]
|
||||
between_objects_gcode =
|
||||
deretract_speed = 40
|
||||
extruder_colour = #FFFF00
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
silent_mode = 0
|
||||
remaining_times = 0
|
||||
machine_max_acceleration_e = 3000
|
||||
machine_max_acceleration_extruding = 1000
|
||||
machine_max_acceleration_retracting = 1000
|
||||
machine_max_acceleration_x = 1500
|
||||
machine_max_acceleration_y = 1500
|
||||
machine_max_acceleration_z = 1500
|
||||
machine_max_feedrate_e = 60
|
||||
machine_max_feedrate_x = 200
|
||||
machine_max_feedrate_y = 200
|
||||
machine_max_feedrate_z = 200
|
||||
machine_max_jerk_e = 5
|
||||
machine_max_jerk_x = 5
|
||||
machine_max_jerk_y = 5
|
||||
machine_max_jerk_z = 5
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
max_layer_height = 0.3
|
||||
min_layer_height = 0.08
|
||||
max_print_height = 300
|
||||
nozzle_diameter = 0.4
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 70%
|
||||
retract_layer_change = 1
|
||||
retract_length = 5
|
||||
retract_length_toolchange = 1
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 60
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode =
|
||||
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG28 ; home\nM84 ; disable motors
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
extruder_clearance_height = 25
|
||||
extruder_clearance_radius = 45
|
||||
default_print_profile = 0.20mm QUALITY @AKOSSEL
|
||||
default_filament_profile = Generic PLA @AKOSSEL
|
||||
|
||||
@@ -0,0 +1,61 @@
|
||||
[printer:*common_mega0*]
|
||||
printer_technology = FFF
|
||||
bed_shape = 0x0,220x0,220x220,0x220
|
||||
before_layer_gcode = ; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm\nG92 E0
|
||||
between_objects_gcode =
|
||||
deretract_speed = 0
|
||||
extruder_colour = #FFFF00
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
silent_mode = 0
|
||||
remaining_times = 0
|
||||
machine_max_acceleration_e = 10000
|
||||
machine_max_acceleration_extruding = 2000
|
||||
machine_max_acceleration_retracting = 1500
|
||||
machine_max_acceleration_x = 3000
|
||||
machine_max_acceleration_y = 3000
|
||||
machine_max_acceleration_z = 500
|
||||
machine_max_feedrate_e = 120
|
||||
machine_max_feedrate_x = 500
|
||||
machine_max_feedrate_y = 500
|
||||
machine_max_feedrate_z = 12
|
||||
machine_max_jerk_e = 2.5
|
||||
machine_max_jerk_x = 20
|
||||
machine_max_jerk_y = 20
|
||||
machine_max_jerk_z = 0.4
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
layer_gcode = ; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm
|
||||
max_layer_height = 0.3
|
||||
min_layer_height = 0.1
|
||||
max_print_height = 200
|
||||
nozzle_diameter = 0.4
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
retract_before_travel = 1
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 1
|
||||
retract_length = 6
|
||||
retract_length_toolchange = 1
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 30
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM117 Homing X/Y ...\nG28 X0 Y0 ;move X/Y to min endstops\nM117 Homing Z ...\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F240 ;move the platform down 15mm\nM117 Heating ...\nM104 S[first_layer_temperature]\n ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature]\n ; wait for extruder temp\nM117 Start cleaning ...\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nM117 Intro line ...\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z[first_layer_height] F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z[first_layer_height] F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z[first_layer_height] F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3[first_layer_height] F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 E-1 F500 ; Retract filiment by 1 mm\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F240 ; Move over to prevent blob squish\nG92 E0 ; Reset Extruder\nM117 Printing...\n
|
||||
end_gcode = M117 Cooling down...\nM104 S0 ; turn off extruder\nM140 S0 ; turn off heatbed\nM107 ; Fan off\nM84 ; disable motors\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F240 ;move Z up a bit and retract filament even more\nG28 X0 ;move X to min endstops, so the head is out of the way\nG90 ;Absolute positionning\nG1 Y200 F3000 ;Present print\nM84 ;steppers off\nM300 P300 S4000\nM117 Finished.\n
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
printer_model =
|
||||
default_print_profile =
|
||||
default_filament_profile =
|
||||
extruder_clearance_height = 25
|
||||
extruder_clearance_radius = 45
|
||||
|
||||
@@ -0,0 +1,43 @@
|
||||
[printer:*common_mega*]
|
||||
printer_technology = FFF
|
||||
bed_shape = 0x0,210x0,210x210,0x210
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]
|
||||
default_filament_profile = Generic PLA @MEGA
|
||||
default_print_profile = 0.15mm QUALITY @MEGA
|
||||
deretract_speed = 50
|
||||
end_gcode = G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors
|
||||
extruder_colour = #808080
|
||||
gcode_flavor = marlin
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
max_layer_height = 0.36
|
||||
max_print_height = 205
|
||||
remaining_times = 1
|
||||
retract_before_travel = 1.5
|
||||
retract_before_wipe = 60%
|
||||
retract_layer_change = 1
|
||||
retract_length = 6
|
||||
retract_lift = 0.075
|
||||
retract_lift_below = 204
|
||||
retract_speed = 40
|
||||
silent_mode = 0
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0
|
||||
thumbnails = 16x16,220x124
|
||||
use_relative_e_distances = 1
|
||||
wipe = 1
|
||||
machine_max_acceleration_e = 10000
|
||||
machine_max_acceleration_extruding = 1250
|
||||
machine_max_acceleration_retracting = 1250
|
||||
machine_max_acceleration_x = 3000
|
||||
machine_max_acceleration_y = 2000
|
||||
machine_max_acceleration_z = 60
|
||||
machine_max_feedrate_e = 60
|
||||
machine_max_feedrate_x = 500
|
||||
machine_max_feedrate_y = 500
|
||||
machine_max_feedrate_z = 6
|
||||
machine_max_jerk_e = 5
|
||||
machine_max_jerk_x = 10
|
||||
machine_max_jerk_y = 10
|
||||
machine_max_jerk_z = 0.4
|
||||
extruder_clearance_height = 35
|
||||
extruder_clearance_radius = 60
|
||||
|
||||
Reference in New Issue
Block a user