Initial Profile Sources

profile_sources/non-prusa-fff/Artillery/filament/Artillery ABS @X3.ini

@@ -0,0 +1,12 @@
+[filament:Artillery ABS @X3]
+inherits = *common_x3*
+bed_temperature = 100
+compatible_prints = X3 Default (0.20mm) @Artillery
+filament_density = 1.04
+filament_retract_length = 1
+filament_retract_speed = 40
+filament_type = ABS
+first_layer_bed_temperature = 100
+first_layer_temperature = 260
+temperature = 250
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery ABS @X4.ini

@@ -0,0 +1,12 @@
+[filament:Artillery ABS @X4]
+inherits = *common_x4*
+bed_temperature = 100
+compatible_prints = ArtillerySlicer X4 Max ABS @Artillery; ArtillerySlicer X4 Plus ABS @Artillery; ArtillerySlicer X4 Pro ABS @Artillery
+filament_density = 1.04
+filament_max_volumetric_speed = 20
+filament_retract_length = 1.3
+filament_type = ABS
+first_layer_bed_temperature = 100
+first_layer_temperature = 260
+temperature = 260
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PETG @X3.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PETG @X3]
+inherits = *common_x3*
+bed_temperature = 90
+compatible_prints = X3 Default (0.20mm) @Artillery
+filament_density = 1.26
+filament_retract_length = 1.1
+filament_retract_speed = 40
+filament_type = PETG
+first_layer_bed_temperature = 90
+first_layer_temperature = 250
+temperature = 245
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PETG @X4.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PETG @X4]
+inherits = *common_x4*
+bed_temperature = 90
+compatible_prints = ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery
+filament_density = 1.26
+filament_max_volumetric_speed = 20
+filament_retract_length = 1.3
+filament_type = PETG
+first_layer_bed_temperature = 90
+first_layer_temperature = 250
+temperature = 250
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PLA & PLA HS @X4.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PLA & PLA HS @X4]
+inherits = *common_x4*
+compatible_prints = ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Max PLA HS @Artillery; ArtillerySlicer X4 Plus PLA HS @Artillery; ArtillerySlicer X4 Pro PLA HS @Artillery
+bed_temperature = 60
+filament_density = 1.2
+filament_max_volumetric_speed = 20
+filament_retract_length = 1.3
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PLA @X3.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PLA @X3]
+inherits = *common_x3*
+bed_temperature = 60
+compatible_prints = X3 Default (0.20mm) @Artillery
+filament_density = 1.24
+filament_retract_length = 1
+filament_retract_speed = 60
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PLA HS @X3.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PLA HS @X3]
+inherits = *common_x3*
+bed_temperature = 60
+compatible_prints = X3 Default (0.20mm) @Artillery
+filament_density = 1.2
+filament_retract_length = 1.2
+filament_retract_speed = 60
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PLA Silk @X3.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PLA Silk @X3]
+inherits = *common_x3*
+bed_temperature = 70
+compatible_prints = X3 Default (0.20mm) @Artillery
+filament_density = 1.2
+filament_retract_length = 1
+filament_retract_speed = 40
+filament_type = PLA
+first_layer_bed_temperature = 70
+first_layer_temperature = 210
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PLA Silk @X4.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PLA Silk @X4]
+inherits = *common_x4*
+bed_temperature = 60
+compatible_prints = ArtillerySlicer X4 Max PLA Silk @Artillery; ArtillerySlicer X4 Plus PLA Silk @Artillery; ArtillerySlicer X4 Pro PLA Silk @Artillery
+filament_density = 1.2
+filament_max_volumetric_speed = 20
+filament_retract_length = 1.2
+filament_type = PLA
+first_layer_bed_temperature = 70
+first_layer_temperature = 215
+temperature = 215
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PLA+ @X4.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PLA+ @X4]
+inherits = *common_x4*
+bed_temperature = 60
+compatible_prints = ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery
+filament_density = 1.25
+filament_max_volumetric_speed = 20
+filament_retract_length = 1.3
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery TPU @X3.ini

@@ -0,0 +1,12 @@
+[filament:Artillery TPU @X3]
+inherits = *common_x3*
+bed_temperature = 70
+compatible_prints = ArtillerySlicer X3 TPU @Artillery
+filament_density = 1.21
+filament_retract_length = 0.8
+filament_retract_speed = 40
+filament_type = TPU
+first_layer_bed_temperature = 70
+first_layer_temperature = 210
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery TPU @X4.ini

@@ -0,0 +1,11 @@
+[filament:Artillery TPU @X4]
+inherits = *common_x4*
+bed_temperature = 70
+compatible_prints = ArtillerySlicer X4 Max TPU @Artillery; ArtillerySlicer X4 Plus TPU @Artillery; ArtillerySlicer X4 Pro TPU @Artillery
+filament_density = 1.21
+filament_max_volumetric_speed = 4
+filament_retract_length = 1.5
+filament_type = TPU
+first_layer_bed_temperature = 70
+first_layer_temperature = 215
+temperature = 215

profile_sources/non-prusa-fff/Artillery/filament/Eolas Prints INGEO 850 @Artillery.ini

@@ -0,0 +1,5 @@
+[filament:Eolas Prints INGEO 850 @Artillery]
+inherits = Eolas Prints PLA @Artillery
+filament_cost = 25.90
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Eolas Prints INGEO 870 @Artillery.ini

@@ -0,0 +1,8 @@
+[filament:Eolas Prints INGEO 870 @Artillery]
+inherits = Eolas Prints PLA @Artillery
+filament_cost = 25.90
+temperature = 215
+first_layer_bed_temperature = 68
+first_layer_temperature = 220
+bed_temperature = 65
+

profile_sources/non-prusa-fff/Artillery/filament/Eolas Prints PETG - UV Resistant @Artillery.ini

@@ -0,0 +1,6 @@
+[filament:Eolas Prints PETG - UV Resistant @Artillery]
+inherits = Eolas Prints PETG @Artillery
+filament_cost = 35.90
+temperature = 242
+first_layer_temperature = 237
+

profile_sources/non-prusa-fff/Artillery/filament/Eolas Prints PETG @Artillery.ini

@@ -0,0 +1,12 @@
+[filament:Eolas Prints PETG @Artillery]
+inherits = *PET*
+filament_vendor = Eolas Prints
+filament_cost = 29.90
+filament_density = 1.27
+filament_spool_weight = 0
+filament_colour = #4D9398
+temperature = 240
+first_layer_bed_temperature = 85
+first_layer_temperature = 235
+bed_temperature = 90
+

profile_sources/non-prusa-fff/Artillery/filament/Eolas Prints PLA @Artillery.ini

@@ -0,0 +1,11 @@
+[filament:Eolas Prints PLA @Artillery]
+inherits = *PLA*
+filament_vendor = Eolas Prints
+filament_cost = 23.50
+filament_density = 1.24
+filament_spool_weight = 0
+filament_colour = #4D9398
+first_layer_bed_temperature = 65
+first_layer_temperature = 208
+temperature = 202
+

profile_sources/non-prusa-fff/Artillery/filament/Eolas Prints PLA Matte @Artillery.ini

@@ -0,0 +1,6 @@
+[filament:Eolas Prints PLA Matte @Artillery]
+inherits = Eolas Prints PLA @Artillery
+filament_cost = 25.50
+filament_max_volumetric_speed = 14
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Eolas Prints TPU 93A @Artillery.ini

@@ -0,0 +1,13 @@
+[filament:Eolas Prints TPU 93A @Artillery]
+inherits = *TPU*
+filament_vendor = Eolas Prints
+filament_cost = 34.99
+filament_density = 1.21
+filament_colour = #4D9398
+filament_max_volumetric_speed = 1.2
+temperature = 230
+first_layer_bed_temperature = 30
+bed_temperature = 30
+filament_retract_length = 0
+extrusion_multiplier = 1.16
+

profile_sources/non-prusa-fff/Artillery/filament/Generic ABS @Artillery.ini

@@ -0,0 +1,4 @@
+[filament:Generic ABS @Artillery]
+inherits = *ABS*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/Artillery/filament/Generic PETG @Artillery.ini

@@ -0,0 +1,4 @@
+[filament:Generic PETG @Artillery]
+inherits = *PET*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/Artillery/filament/Generic PLA @Artillery.ini

@@ -0,0 +1,4 @@
+[filament:Generic PLA @Artillery]
+inherits = *PLA*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/Artillery/filament/Generic TPU @Artillery.ini

@@ -0,0 +1,4 @@
+[filament:Generic TPU @Artillery]
+inherits = *TPU*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/Artillery/filament/_ABS_.ini

@@ -0,0 +1,20 @@
+[filament:*ABS*]
+inherits = *common*
+bed_temperature = 90
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #6603FC
+filament_cost = 20
+filament_density = 1.04
+filament_max_volumetric_speed = 11
+filament_type = ABS
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 0
+min_fan_speed = 0
+temperature = 240
+top_fan_speed = 0
+

profile_sources/non-prusa-fff/Artillery/filament/_PET_.ini

@@ -0,0 +1,19 @@
+[filament:*PET*]
+inherits = *common*
+bed_temperature = 70
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #42E9F5
+filament_cost = 30
+filament_density = 1.27
+filament_max_volumetric_speed = 8
+filament_type = PETG
+first_layer_bed_temperature = 70
+first_layer_temperature = 235
+max_fan_speed = 50
+min_fan_speed = 20
+temperature = 230
+

profile_sources/non-prusa-fff/Artillery/filament/_PLA_.ini

@@ -0,0 +1,20 @@
+[filament:*PLA*]
+inherits = *common*
+bed_temperature = 60
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #428AF5
+filament_cost = 20
+filament_density = 1.24
+filament_max_volumetric_speed = 15
+filament_type = PLA
+first_layer_bed_temperature = 65
+first_layer_temperature = 210
+full_fan_speed_layer = 3
+max_fan_speed = 100
+min_fan_speed = 100
+temperature = 205
+

profile_sources/non-prusa-fff/Artillery/filament/_TPU_.ini

@@ -0,0 +1,20 @@
+[filament:*TPU*]
+inherits = *common*
+bed_temperature = 55
+cooling = 0
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #CFFFFB
+filament_cost = 30
+filament_density = 1.2
+filament_max_volumetric_speed = 11
+filament_retract_before_travel = 4
+filament_retract_length = 2.5
+filament_retract_speed = 30
+filament_type = TPU
+first_layer_bed_temperature = 55
+first_layer_temperature = 210
+max_fan_speed = 70
+min_fan_speed = 0
+

profile_sources/non-prusa-fff/Artillery/filament/_common_.ini

@@ -0,0 +1,16 @@
+[filament:*common*]
+cooling = 1
+compatible_printers = 
+extrusion_multiplier = 1
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_print_speed = 15
+slowdown_below_layer_time = 15
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_Artillery.*/
+
+
+# Common filament preset

profile_sources/non-prusa-fff/Artillery/filament/_common_x3_.ini

@@ -0,0 +1,8 @@
+[filament:*common_x3*]
+inherits = *common_x3_x4*
+disable_fan_first_layers = 2
+filament_max_volumetric_speed = 0
+filament_retract_before_travel = 1
+filament_wipe = nil
+compatible_printers_condition = printer_model=~/(X3).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/filament/_common_x3_x4_.ini

@@ -0,0 +1,56 @@
+[filament:*common_x3_x4*]
+bridge_fan_speed = 100
+compatible_printers =
+compatible_printers_condition =
+compatible_prints_condition =
+cooling = 1
+enable_dynamic_fan_speeds = 0
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.98
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #E2E2E2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length_toolchange = nil
+filament_retract_lift = 0.1
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = Artillery
+full_fan_speed_layer = 0
+idle_temperature = nil
+inherits =
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 10
+overhang_fan_speed_0 = 0
+overhang_fan_speed_1 = 0
+overhang_fan_speed_2 = 0
+overhang_fan_speed_3 = 0
+slowdown_below_layer_time = 5
+start_filament_gcode = ; Filament gcode
+

profile_sources/non-prusa-fff/Artillery/filament/_common_x4_.ini

@@ -0,0 +1,8 @@
+[filament:*common_x4*]
+inherits = *common_x3_x4*
+disable_fan_first_layers = 1
+filament_retract_before_travel = 2
+filament_retract_speed = 40
+filament_wipe = 1
+compatible_printers_condition = printer_model=~/(X4).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/metadata.json

@@ -0,0 +1,534 @@
+{
+  "repo": {
+    "id": "non-prusa-fff",
+    "name": "Other FFF",
+    "description": "FFF Printers by other vendors",
+    "visibility": ""
+  },
+  "vendor": "Artillery",
+  "version": "1.1.1",
+  "index_name": "Artillery.idx",
+  "section_order": [
+    {
+      "type": "vendor",
+      "name": "vendor",
+      "path": "vendor/vendor.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "X1",
+      "path": "printer_model/X1.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "Genius",
+      "path": "printer_model/Genius.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "Hornet",
+      "path": "printer_model/Hornet.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "X3 Plus",
+      "path": "printer_model/X3 Plus.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "X3 Pro",
+      "path": "printer_model/X3 Pro.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "X4 Plus",
+      "path": "printer_model/X4 Plus.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "X4 Pro",
+      "path": "printer_model/X4 Pro.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "X4 Max",
+      "path": "printer_model/X4 Max.ini"
+    },
+    {
+      "type": "printer",
+      "name": "*common*",
+      "path": "printer/_common_.ini"
+    },
+    {
+      "type": "printer",
+      "name": "*common_STOCK_FW*",
+      "path": "printer/_common_STOCK_FW_.ini"
+    },
+    {
+      "type": "printer",
+      "name": "*common_UPD_FW*",
+      "path": "printer/_common_UPD_FW_.ini"
+    },
+    {
+      "type": "printer",
+      "name": "*bowden*",
+      "path": "printer/_bowden_.ini"
+    },
+    {
+      "type": "printer",
+      "name": "*0.4nozzle*",
+      "path": "printer/_0.4nozzle_.ini"
+    },
+    {
+      "type": "printer",
+      "name": "*common_X3_X4*",
+      "path": "printer/_common_X3_X4_.ini"
+    },
+    {
+      "type": "printer",
+      "name": "*common_X3*",
+      "path": "printer/_common_X3_.ini"
+    },
+    {
+      "type": "printer",
+      "name": "*common_X4*",
+      "path": "printer/_common_X4_.ini"
+    },
+    {
+      "type": "printer",
+      "name": "Artillery Sidewinder X1",
+      "path": "printer/Artillery Sidewinder X1.ini"
+    },
+    {
+      "type": "printer",
+      "name": "Artillery Sidewinder X1 BL-TOUCH",
+      "path": "printer/Artillery Sidewinder X1 BL-TOUCH.ini"
+    },
+    {
+      "type": "printer",
+      "name": "Artillery Genius",
+      "path": "printer/Artillery Genius.ini"
+    },
+    {
+      "type": "printer",
+      "name": "Artillery Genius BL-TOUCH",
+      "path": "printer/Artillery Genius BL-TOUCH.ini"
+    },
+    {
+      "type": "printer",
+      "name": "Artillery Hornet",
+      "path": "printer/Artillery Hornet.ini"
+    },
+    {
+      "type": "printer",
+      "name": "Artillery Sidewinder X3 Plus",
+      "path": "printer/Artillery Sidewinder X3 Plus.ini"
+    },
+    {
+      "type": "printer",
+      "name": "Artillery Sidewinder X3 Pro",
+      "path": "printer/Artillery Sidewinder X3 Pro.ini"
+    },
+    {
+      "type": "printer",
+      "name": "Artillery Sidewinder X4 Plus",
+      "path": "printer/Artillery Sidewinder X4 Plus.ini"
+    },
+    {
+      "type": "printer",
+      "name": "Artillery Sidewinder X4 Pro",
+      "path": "printer/Artillery Sidewinder X4 Pro.ini"
+    },
+    {
+      "type": "printer",
+      "name": "Artillery Sidewinder X4 Max",
+      "path": "printer/Artillery Sidewinder X4 Max.ini"
+    },
+    {
+      "type": "print",
+      "name": "*common*",
+      "path": "print/_common_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.08mm*",
+      "path": "print/_0.08mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.10mm*",
+      "path": "print/_0.10mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.12mm*",
+      "path": "print/_0.12mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.16mm*",
+      "path": "print/_0.16mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.20mm*",
+      "path": "print/_0.20mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.24mm*",
+      "path": "print/_0.24mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.28mm*",
+      "path": "print/_0.28mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.08mm SUPERDETAIL @Artillery",
+      "path": "print/0.08mm SUPERDETAIL @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.10mm HIGHDETAIL @Artillery",
+      "path": "print/0.10mm HIGHDETAIL @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.12mm DETAIL @Artillery",
+      "path": "print/0.12mm DETAIL @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.16mm OPTIMAL @Artillery",
+      "path": "print/0.16mm OPTIMAL @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.20mm SLOW @Artillery",
+      "path": "print/0.20mm SLOW @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.20mm NORMAL @Artillery",
+      "path": "print/0.20mm NORMAL @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.20mm SPEED @Artillery",
+      "path": "print/0.20mm SPEED @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.24mm DRAFT @Artillery",
+      "path": "print/0.24mm DRAFT @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.28mm SUPERDRAFT @Artillery",
+      "path": "print/0.28mm SUPERDRAFT @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "*common_x3_x4*",
+      "path": "print/_common_x3_x4_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*common_x3*",
+      "path": "print/_common_x3_.ini"
+    },
+    {
+      "type": "print",
+      "name": "X3 Default (0.20mm) @Artillery",
+      "path": "print/X3 Default (0.20mm) @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X3 TPU @Artillery",
+      "path": "print/ArtillerySlicer X3 TPU @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "*common_x4*",
+      "path": "print/_common_x4_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*common_x4_max*",
+      "path": "print/_common_x4_max_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*common_x4_plus*",
+      "path": "print/_common_x4_plus_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*common_x4_pro*",
+      "path": "print/_common_x4_pro_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*common_x4_ABS_PETG_PLA*",
+      "path": "print/_common_x4_ABS_PETG_PLA_.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X4 Max ABS @Artillery",
+      "path": "print/ArtillerySlicer X4 Max ABS @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X4 Plus ABS @Artillery",
+      "path": "print/ArtillerySlicer X4 Plus ABS @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X4 Pro ABS @Artillery",
+      "path": "print/ArtillerySlicer X4 Pro ABS @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery",
+      "path": "print/ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery",
+      "path": "print/ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery",
+      "path": "print/ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X4 Max PLA HS @Artillery",
+      "path": "print/ArtillerySlicer X4 Max PLA HS @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X4 Plus PLA HS @Artillery",
+      "path": "print/ArtillerySlicer X4 Plus PLA HS @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X4 Pro PLA HS @Artillery",
+      "path": "print/ArtillerySlicer X4 Pro PLA HS @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X4 Max PLA Silk @Artillery",
+      "path": "print/ArtillerySlicer X4 Max PLA Silk @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X4 Plus PLA Silk @Artillery",
+      "path": "print/ArtillerySlicer X4 Plus PLA Silk @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X4 Pro PLA Silk @Artillery",
+      "path": "print/ArtillerySlicer X4 Pro PLA Silk @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "*common_x4_TPU*",
+      "path": "print/_common_x4_TPU_.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X4 Max TPU @Artillery",
+      "path": "print/ArtillerySlicer X4 Max TPU @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X4 Plus TPU @Artillery",
+      "path": "print/ArtillerySlicer X4 Plus TPU @Artillery.ini"
+    },
+    {
+      "type": "print",
+      "name": "ArtillerySlicer X4 Pro TPU @Artillery",
+      "path": "print/ArtillerySlicer X4 Pro TPU @Artillery.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*common*",
+      "path": "filament/_common_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*common_x3_x4*",
+      "path": "filament/_common_x3_x4_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*common_x3*",
+      "path": "filament/_common_x3_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*common_x4*",
+      "path": "filament/_common_x4_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*PLA*",
+      "path": "filament/_PLA_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*PET*",
+      "path": "filament/_PET_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*ABS*",
+      "path": "filament/_ABS_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*TPU*",
+      "path": "filament/_TPU_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic PLA @Artillery",
+      "path": "filament/Generic PLA @Artillery.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic PETG @Artillery",
+      "path": "filament/Generic PETG @Artillery.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic ABS @Artillery",
+      "path": "filament/Generic ABS @Artillery.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic TPU @Artillery",
+      "path": "filament/Generic TPU @Artillery.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Eolas Prints PLA @Artillery",
+      "path": "filament/Eolas Prints PLA @Artillery.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Eolas Prints PLA Matte @Artillery",
+      "path": "filament/Eolas Prints PLA Matte @Artillery.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Eolas Prints INGEO 850 @Artillery",
+      "path": "filament/Eolas Prints INGEO 850 @Artillery.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Eolas Prints INGEO 870 @Artillery",
+      "path": "filament/Eolas Prints INGEO 870 @Artillery.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Eolas Prints PETG @Artillery",
+      "path": "filament/Eolas Prints PETG @Artillery.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Eolas Prints PETG - UV Resistant @Artillery",
+      "path": "filament/Eolas Prints PETG - UV Resistant @Artillery.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Eolas Prints TPU 93A @Artillery",
+      "path": "filament/Eolas Prints TPU 93A @Artillery.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Artillery ABS @X3",
+      "path": "filament/Artillery ABS @X3.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Artillery PETG @X3",
+      "path": "filament/Artillery PETG @X3.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Artillery PLA @X3",
+      "path": "filament/Artillery PLA @X3.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Artillery PLA HS @X3",
+      "path": "filament/Artillery PLA HS @X3.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Artillery PLA Silk @X3",
+      "path": "filament/Artillery PLA Silk @X3.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Artillery TPU @X3",
+      "path": "filament/Artillery TPU @X3.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Artillery ABS @X4",
+      "path": "filament/Artillery ABS @X4.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Artillery PETG @X4",
+      "path": "filament/Artillery PETG @X4.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Artillery PLA & PLA HS @X4",
+      "path": "filament/Artillery PLA & PLA HS @X4.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Artillery PLA+ @X4",
+      "path": "filament/Artillery PLA+ @X4.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Artillery PLA Silk @X4",
+      "path": "filament/Artillery PLA Silk @X4.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Artillery TPU @X4",
+      "path": "filament/Artillery TPU @X4.ini"
+    }
+  ],
+  "asset_paths": [
+    "Genius_thumbnail.png",
+    "Hornet_thumbnail.png",
+    "X1_thumbnail.png",
+    "X3 Plus_thumbnail.png",
+    "X3 Pro_thumbnail.png",
+    "X4 Max_thumbnail.png",
+    "X4 Plus_thumbnail.png",
+    "X4 Pro_thumbnail.png",
+    "bed-genius.png",
+    "bed-genius.stl",
+    "bed-hornet.png",
+    "bed-hornet.stl",
+    "bed-x1.png",
+    "bed-x1.stl",
+    "bed-x3-plus.stl",
+    "bed-x3-pro.stl",
+    "bed-x4-max.stl",
+    "bed-x4-plus.stl",
+    "bed-x4-pro.stl"
+  ]
+}

profile_sources/non-prusa-fff/Artillery/print/0.08mm SUPERDETAIL @Artillery.ini

@@ -0,0 +1,4 @@
+[print:0.08mm SUPERDETAIL @Artillery]
+inherits = *0.08mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.10mm HIGHDETAIL @Artillery.ini

@@ -0,0 +1,4 @@
+[print:0.10mm HIGHDETAIL @Artillery]
+inherits = *0.10mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.12mm DETAIL @Artillery.ini

@@ -0,0 +1,4 @@
+[print:0.12mm DETAIL @Artillery]
+inherits = *0.12mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.16mm OPTIMAL @Artillery.ini

@@ -0,0 +1,4 @@
+[print:0.16mm OPTIMAL @Artillery]
+inherits = *0.16mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.20mm NORMAL @Artillery.ini

@@ -0,0 +1,4 @@
+[print:0.20mm NORMAL @Artillery]
+inherits = *0.20mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.20mm SLOW @Artillery.ini

@@ -0,0 +1,14 @@
+[print:0.20mm SLOW @Artillery]
+inherits = *0.20mm*
+external_perimeter_speed = 15
+fill_density = 20%
+gap_fill_speed = 25
+infill_speed = 50
+perimeter_speed = 30
+perimeters = 3
+solid_infill_speed = 50
+top_solid_infill_speed = 25
+first_layer_speed = 15
+travel_speed = 100
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.20mm SPEED @Artillery.ini

@@ -0,0 +1,15 @@
+[print:0.20mm SPEED @Artillery]
+inherits = *0.20mm*
+external_perimeter_speed = 35
+fill_density = 15%
+fill_pattern = grid
+gap_fill_speed = 45
+infill_speed = 150
+infill_only_where_needed = 1
+perimeter_speed = 60
+perimeters = 2
+solid_infill_speed = 150
+top_solid_infill_speed = 50
+travel_speed = 170
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.24mm DRAFT @Artillery.ini

@@ -0,0 +1,4 @@
+[print:0.24mm DRAFT @Artillery]
+inherits = *0.24mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.28mm SUPERDRAFT @Artillery.ini

@@ -0,0 +1,4 @@
+[print:0.28mm SUPERDRAFT @Artillery]
+inherits = *0.28mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X3 TPU @Artillery.ini

@@ -0,0 +1,5 @@
+[print:ArtillerySlicer X3 TPU @Artillery]
+inherits = *common_x3*
+external_perimeter_speed = 30
+infill_speed = 30
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Max ABS @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Max ABS @Artillery]
+inherits = *common_x4_max*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 100
+solid_infill_speed = 100
+top_solid_infill_speed = 100
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery]
+inherits = *common_x4_max*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 150
+solid_infill_speed = 100
+top_solid_infill_speed = 100
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Max PLA HS @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Max PLA HS @Artillery]
+inherits = *common_x4_max*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 1
+infill_speed = 150
+solid_infill_speed = 100
+top_solid_infill_speed = 100
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Max PLA Silk @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Max PLA Silk @Artillery]
+inherits = *common_x4_max*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 150
+solid_infill_speed = 100
+top_solid_infill_speed = 100
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Max TPU @Artillery.ini

@@ -0,0 +1,3 @@
+[print:ArtillerySlicer X4 Max TPU @Artillery]
+inherits = *common_x4_max*; *common_x4_TPU*
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Plus ABS @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Plus ABS @Artillery]
+inherits = *common_x4_plus*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 100
+solid_infill_speed = 150
+top_solid_infill_speed = 150
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery]
+inherits = *common_x4_plus*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 150
+solid_infill_speed = 150
+top_solid_infill_speed = 150
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Plus PLA HS @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Plus PLA HS @Artillery]
+inherits = *common_x4_plus*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 1
+infill_speed = 150
+solid_infill_speed = 150
+top_solid_infill_speed = 150
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Plus PLA Silk @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Plus PLA Silk @Artillery]
+inherits = *common_x4_plus*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 150
+solid_infill_speed = 150
+top_solid_infill_speed = 150
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Plus TPU @Artillery.ini

@@ -0,0 +1,3 @@
+[print:ArtillerySlicer X4 Plus TPU @Artillery]
+inherits = *common_x4_plus*; *common_x4_TPU*
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Pro ABS @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Pro ABS @Artillery]
+inherits = *common_x4_pro*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 100
+solid_infill_speed = 200
+top_solid_infill_speed = 200
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery]
+inherits = *common_x4_pro*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 300
+solid_infill_speed = 200
+top_solid_infill_speed = 200
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Pro PLA HS @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Pro PLA HS @Artillery]
+inherits = *common_x4_pro*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 1
+infill_speed = 300
+solid_infill_speed = 200
+top_solid_infill_speed = 200
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Pro PLA Silk @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Pro PLA Silk @Artillery]
+inherits = *common_x4_pro*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 150
+solid_infill_speed = 200
+top_solid_infill_speed = 200
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Pro TPU @Artillery.ini

@@ -0,0 +1,8 @@
+[print:ArtillerySlicer X4 Pro TPU @Artillery]
+inherits = *common_x4_pro*; *common_x4_TPU*
+
+###############
+## FILAMENTS ##
+###############
+
+# Common filament preset

profile_sources/non-prusa-fff/Artillery/print/X3 Default (0.20mm) @Artillery.ini

@@ -0,0 +1,26 @@
+[print:X3 Default (0.20mm) @Artillery]
+inherits = *common_x3*
+first_layer_height = 0.2
+perimeters = 2
+seam_position = random
+infill_anchor = 400%
+small_perimeter_speed = 50%
+external_perimeter_speed = 120
+infill_speed = 150
+support_material_speed = 200
+bridge_speed = 70
+gap_fill_speed = 120
+overhang_speed_0 = 80%
+overhang_speed_1 = 50
+overhang_speed_2 = 30
+overhang_speed_3 = 10
+travel_speed = 350
+first_layer_speed = 50
+first_layer_acceleration = 1000
+extrusion_width = 0.4
+first_layer_extrusion_width = 0.5
+perimeter_extrusion_width = 0.4
+infill_overlap = 35%
+resolution = 0.012
+gcode_resolution = 0.012
+

profile_sources/non-prusa-fff/Artillery/print/_0.08mm_.ini

@@ -0,0 +1,8 @@
+[print:*0.08mm*]
+inherits = *common*
+default_acceleration = 500
+layer_height = 0.08
+perimeters = 3
+bottom_solid_layers = 9
+top_solid_layers = 11
+

profile_sources/non-prusa-fff/Artillery/print/_0.10mm_.ini

@@ -0,0 +1,8 @@
+[print:*0.10mm*]
+inherits = *common*
+default_acceleration = 500
+layer_height = 0.1
+perimeters = 3
+bottom_solid_layers = 7
+top_solid_layers = 9
+

profile_sources/non-prusa-fff/Artillery/print/_0.12mm_.ini

@@ -0,0 +1,8 @@
+[print:*0.12mm*]
+inherits = *common*
+default_acceleration = 500
+layer_height = 0.12
+perimeters = 3
+bottom_solid_layers = 6
+top_solid_layers = 7
+

profile_sources/non-prusa-fff/Artillery/print/_0.16mm_.ini

@@ -0,0 +1,6 @@
+[print:*0.16mm*]
+inherits = *common*
+layer_height = 0.16
+bottom_solid_layers = 5
+top_solid_layers = 7
+

profile_sources/non-prusa-fff/Artillery/print/_0.20mm_.ini

@@ -0,0 +1,6 @@
+[print:*0.20mm*]
+inherits = *common*
+layer_height = 0.20
+bottom_solid_layers = 4
+top_solid_layers = 5
+

profile_sources/non-prusa-fff/Artillery/print/_0.24mm_.ini

@@ -0,0 +1,7 @@
+[print:*0.24mm*]
+inherits = *common*
+layer_height = 0.24
+top_infill_extrusion_width = 0.45
+bottom_solid_layers = 3
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/Artillery/print/_0.28mm_.ini

@@ -0,0 +1,9 @@
+[print:*0.28mm*]
+inherits = *common*
+layer_height = 0.28
+first_layer_height = 0.36
+top_infill_extrusion_width = 0.45
+first_layer_extrusion_width = 0.75
+bottom_solid_layers = 3
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/Artillery/print/_common_.ini

@@ -0,0 +1,110 @@
+[print:*common*]
+# V2.2 #
+#bottom_fill_pattern = rectilinear
+#top_fill_pattern = rectilinear
+#fill_pattern = cubic
+# V2.3 #
+top_fill_pattern = monotonic
+bottom_fill_pattern = monotonic
+fill_pattern = adaptivecubic
+
+avoid_crossing_perimeters = 0
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.78
+bridge_speed = 20
+# brim_width = 5
+bottom_solid_min_thickness = 1.2
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 25
+external_perimeters_first = 0
+extra_perimeters = 0
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 15%
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.25
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 1
+gcode_label_objects = 1
+infill_acceleration = 1000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 50
+interface_shells = 0
+max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+overhangs = 1
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeters = 3
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 45
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirts = 1
+skirt_distance = 6
+skirt_height = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.15
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 1
+travel_speed = 130
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 30
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0
+

profile_sources/non-prusa-fff/Artillery/print/_common_x3_.ini

@@ -0,0 +1,17 @@
+[print:*common_x3*]
+inherits = *common_x3_x4*
+compatible_printers_condition = printer_model=~/(X3).*/ and nozzle_diameter[0]==0.4
+avoid_crossing_perimeters = 0
+bridge_acceleration = 1000
+default_acceleration = 3000
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 1500
+external_perimeter_extrusion_width = 0.45
+fill_density = 5%
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0.42
+infill_overlap = 25%
+max_print_speed = 400
+solid_infill_speed = 150
+top_solid_infill_speed = 150
+

profile_sources/non-prusa-fff/Artillery/print/_common_x3_x4_.ini

@@ -0,0 +1,77 @@
+[print:*common_x3_x4*]
+avoid_crossing_curled_overhangs = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 30
+brim_separation = 0
+brim_type = outer_only
+brim_width = 0
+compatible_printers =
+compatible_printers_condition =
+complete_objects = 0
+dont_support_bridges = 1
+draft_shield = disabled
+elefant_foot_compensation = 0
+external_perimeters_first = 0
+extra_perimeters = 1
+extra_perimeters_on_overhangs = 0
+extrusion_width = 0.45
+fill_angle = 45
+fill_pattern = alignedrectilinear
+first_layer_acceleration_over_raft = 0
+first_layer_height = 0.25
+first_layer_speed = 30
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 20
+gcode_comments = 0
+gcode_label_objects = 0
+gcode_resolution = 0.0125
+gcode_substitutions =
+infill_acceleration = 0
+infill_anchor = 600%
+infill_anchor_max = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+inherits =
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_bead_width = 85%
+min_feature_size = 25%
+min_skirt_length = 0
+mmu_segmented_region_interlocking_depth = 0
+mmu_segmented_region_max_width = 0
+notes =
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeter_acceleration = 1500
+perimeter_speed = 120
+seam_position = rear
+skirts = 0
+skirt_distance = 0
+small_perimeter_speed = 25
+solid_infill_extrusion_width = 0.45
+support_material_extrusion_width = 0.35
+top_infill_extrusion_width = 0.4
+travel_acceleration = 3000
+travel_speed = 250
+external_perimeter_extrusion_width = 0.4
+

profile_sources/non-prusa-fff/Artillery/print/_common_x4_.ini

@@ -0,0 +1,8 @@
+[print:*common_x4*]
+inherits = *common_x3_x4*
+bridge_acceleration = 3000
+external_perimeter_acceleration = 3000
+first_layer_acceleration = 3000
+first_layer_extrusion_width = 0.5
+infill_overlap = 75%
+

profile_sources/non-prusa-fff/Artillery/print/_common_x4_ABS_PETG_PLA_.ini

@@ -0,0 +1,4 @@
+[print:*common_x4_ABS_PETG_PLA*]
+external_perimeter_speed = 50%
+max_print_speed = 300
+

profile_sources/non-prusa-fff/Artillery/print/_common_x4_TPU_.ini

@@ -0,0 +1,10 @@
+[print:*common_x4_TPU*]
+avoid_crossing_perimeters = 0
+enable_dynamic_overhang_speeds = 0
+external_perimeter_speed = 30
+fill_density = 15%
+infill_speed = 30
+max_print_speed = 60
+solid_infill_speed = 30
+top_solid_infill_speed = 30
+

profile_sources/non-prusa-fff/Artillery/print/_common_x4_max_.ini

@@ -0,0 +1,5 @@
+[print:*common_x4_max*]
+inherits = *common_x4*
+default_acceleration = 3000
+compatible_printers_condition = printer_model=~/(X4 Max).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/_common_x4_plus_.ini

@@ -0,0 +1,5 @@
+[print:*common_x4_plus*]
+inherits = *common_x4*
+default_acceleration = 5000
+compatible_printers_condition = printer_model=~/(X4 Plus).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/_common_x4_pro_.ini

@@ -0,0 +1,5 @@
+[print:*common_x4_pro*]
+inherits = *common_x4*
+default_acceleration = 10000
+compatible_printers_condition = printer_model=~/(X4 Pro).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/printer/Artillery Genius BL-TOUCH.ini

@@ -0,0 +1,9 @@
+[printer:Artillery Genius BL-TOUCH]
+inherits = *common_UPD_FW*
+renamed_from = "Genius BL-TOUCH"
+printer_model = Genius
+printer_variant = 0.4
+bed_shape = 0x0,220x0,220x220,0x220
+max_print_height = 250
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Genius
+

profile_sources/non-prusa-fff/Artillery/printer/Artillery Genius.ini

@@ -0,0 +1,9 @@
+[printer:Artillery Genius]
+inherits = *common_STOCK_FW*
+renamed_from = "Genius"
+printer_model = Genius
+printer_variant = 0.4
+bed_shape = 0x0,220x0,220x220,0x220
+max_print_height = 250
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Genius
+

profile_sources/non-prusa-fff/Artillery/printer/Artillery Hornet.ini

@@ -0,0 +1,9 @@
+[printer:Artillery Hornet]
+inherits = *bowden*
+printer_model = Hornet
+printer_variant = 0.4
+bed_shape = 0x0,220x0,220x220,0x220
+max_print_height = 250
+machine_limits_usage = time_estimate_only
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Hornet\nPRINTER_HAS_Bowden
+

profile_sources/non-prusa-fff/Artillery/printer/Artillery Sidewinder X1 BL-TOUCH.ini

@@ -0,0 +1,9 @@
+[printer:Artillery Sidewinder X1 BL-TOUCH]
+inherits = *common_UPD_FW*
+renamed_from = "Sidewinder X1 BL-TOUCH"
+printer_model = X1
+printer_variant = 0.4
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 400
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_X1
+

profile_sources/non-prusa-fff/Artillery/printer/Artillery Sidewinder X1.ini

@@ -0,0 +1,9 @@
+[printer:Artillery Sidewinder X1]
+inherits = *common_STOCK_FW*
+renamed_from = "Sidewinder X1"
+printer_model = X1
+printer_variant = 0.4
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 400
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_X1
+

profile_sources/non-prusa-fff/Artillery/printer/Artillery Sidewinder X3 Plus.ini

@@ -0,0 +1,7 @@
+[printer:Artillery Sidewinder X3 Plus]
+inherits = *common_X3*
+printer_model = X3 Plus
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 400
+printer_notes = 
+

profile_sources/non-prusa-fff/Artillery/printer/Artillery Sidewinder X3 Pro.ini

@@ -0,0 +1,7 @@
+[printer:Artillery Sidewinder X3 Pro]
+inherits = *common_X3*
+printer_model = X3 Pro
+bed_shape = 0x0,240x0,240x240,0x240
+max_print_height = 260
+printer_notes = 
+