Initial Profile Sources

profile_sources/non-prusa-fff/Artillery/filament/Artillery ABS @X3.ini

@@ -0,0 +1,12 @@
+[filament:Artillery ABS @X3]
+inherits = *common_x3*
+bed_temperature = 100
+compatible_prints = X3 Default (0.20mm) @Artillery
+filament_density = 1.04
+filament_retract_length = 1
+filament_retract_speed = 40
+filament_type = ABS
+first_layer_bed_temperature = 100
+first_layer_temperature = 260
+temperature = 250
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery ABS @X4.ini

@@ -0,0 +1,12 @@
+[filament:Artillery ABS @X4]
+inherits = *common_x4*
+bed_temperature = 100
+compatible_prints = ArtillerySlicer X4 Max ABS @Artillery; ArtillerySlicer X4 Plus ABS @Artillery; ArtillerySlicer X4 Pro ABS @Artillery
+filament_density = 1.04
+filament_max_volumetric_speed = 20
+filament_retract_length = 1.3
+filament_type = ABS
+first_layer_bed_temperature = 100
+first_layer_temperature = 260
+temperature = 260
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PETG @X3.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PETG @X3]
+inherits = *common_x3*
+bed_temperature = 90
+compatible_prints = X3 Default (0.20mm) @Artillery
+filament_density = 1.26
+filament_retract_length = 1.1
+filament_retract_speed = 40
+filament_type = PETG
+first_layer_bed_temperature = 90
+first_layer_temperature = 250
+temperature = 245
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PETG @X4.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PETG @X4]
+inherits = *common_x4*
+bed_temperature = 90
+compatible_prints = ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery
+filament_density = 1.26
+filament_max_volumetric_speed = 20
+filament_retract_length = 1.3
+filament_type = PETG
+first_layer_bed_temperature = 90
+first_layer_temperature = 250
+temperature = 250
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PLA & PLA HS @X4.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PLA & PLA HS @X4]
+inherits = *common_x4*
+compatible_prints = ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Max PLA HS @Artillery; ArtillerySlicer X4 Plus PLA HS @Artillery; ArtillerySlicer X4 Pro PLA HS @Artillery
+bed_temperature = 60
+filament_density = 1.2
+filament_max_volumetric_speed = 20
+filament_retract_length = 1.3
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PLA @X3.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PLA @X3]
+inherits = *common_x3*
+bed_temperature = 60
+compatible_prints = X3 Default (0.20mm) @Artillery
+filament_density = 1.24
+filament_retract_length = 1
+filament_retract_speed = 60
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PLA HS @X3.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PLA HS @X3]
+inherits = *common_x3*
+bed_temperature = 60
+compatible_prints = X3 Default (0.20mm) @Artillery
+filament_density = 1.2
+filament_retract_length = 1.2
+filament_retract_speed = 60
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PLA Silk @X3.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PLA Silk @X3]
+inherits = *common_x3*
+bed_temperature = 70
+compatible_prints = X3 Default (0.20mm) @Artillery
+filament_density = 1.2
+filament_retract_length = 1
+filament_retract_speed = 40
+filament_type = PLA
+first_layer_bed_temperature = 70
+first_layer_temperature = 210
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PLA Silk @X4.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PLA Silk @X4]
+inherits = *common_x4*
+bed_temperature = 60
+compatible_prints = ArtillerySlicer X4 Max PLA Silk @Artillery; ArtillerySlicer X4 Plus PLA Silk @Artillery; ArtillerySlicer X4 Pro PLA Silk @Artillery
+filament_density = 1.2
+filament_max_volumetric_speed = 20
+filament_retract_length = 1.2
+filament_type = PLA
+first_layer_bed_temperature = 70
+first_layer_temperature = 215
+temperature = 215
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery PLA+ @X4.ini

@@ -0,0 +1,12 @@
+[filament:Artillery PLA+ @X4]
+inherits = *common_x4*
+bed_temperature = 60
+compatible_prints = ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery
+filament_density = 1.25
+filament_max_volumetric_speed = 20
+filament_retract_length = 1.3
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery TPU @X3.ini

@@ -0,0 +1,12 @@
+[filament:Artillery TPU @X3]
+inherits = *common_x3*
+bed_temperature = 70
+compatible_prints = ArtillerySlicer X3 TPU @Artillery
+filament_density = 1.21
+filament_retract_length = 0.8
+filament_retract_speed = 40
+filament_type = TPU
+first_layer_bed_temperature = 70
+first_layer_temperature = 210
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Artillery TPU @X4.ini

@@ -0,0 +1,11 @@
+[filament:Artillery TPU @X4]
+inherits = *common_x4*
+bed_temperature = 70
+compatible_prints = ArtillerySlicer X4 Max TPU @Artillery; ArtillerySlicer X4 Plus TPU @Artillery; ArtillerySlicer X4 Pro TPU @Artillery
+filament_density = 1.21
+filament_max_volumetric_speed = 4
+filament_retract_length = 1.5
+filament_type = TPU
+first_layer_bed_temperature = 70
+first_layer_temperature = 215
+temperature = 215

profile_sources/non-prusa-fff/Artillery/filament/Eolas Prints INGEO 850 @Artillery.ini

@@ -0,0 +1,5 @@
+[filament:Eolas Prints INGEO 850 @Artillery]
+inherits = Eolas Prints PLA @Artillery
+filament_cost = 25.90
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Eolas Prints INGEO 870 @Artillery.ini

@@ -0,0 +1,8 @@
+[filament:Eolas Prints INGEO 870 @Artillery]
+inherits = Eolas Prints PLA @Artillery
+filament_cost = 25.90
+temperature = 215
+first_layer_bed_temperature = 68
+first_layer_temperature = 220
+bed_temperature = 65
+

profile_sources/non-prusa-fff/Artillery/filament/Eolas Prints PETG - UV Resistant @Artillery.ini

@@ -0,0 +1,6 @@
+[filament:Eolas Prints PETG - UV Resistant @Artillery]
+inherits = Eolas Prints PETG @Artillery
+filament_cost = 35.90
+temperature = 242
+first_layer_temperature = 237
+

profile_sources/non-prusa-fff/Artillery/filament/Eolas Prints PETG @Artillery.ini

@@ -0,0 +1,12 @@
+[filament:Eolas Prints PETG @Artillery]
+inherits = *PET*
+filament_vendor = Eolas Prints
+filament_cost = 29.90
+filament_density = 1.27
+filament_spool_weight = 0
+filament_colour = #4D9398
+temperature = 240
+first_layer_bed_temperature = 85
+first_layer_temperature = 235
+bed_temperature = 90
+

profile_sources/non-prusa-fff/Artillery/filament/Eolas Prints PLA @Artillery.ini

@@ -0,0 +1,11 @@
+[filament:Eolas Prints PLA @Artillery]
+inherits = *PLA*
+filament_vendor = Eolas Prints
+filament_cost = 23.50
+filament_density = 1.24
+filament_spool_weight = 0
+filament_colour = #4D9398
+first_layer_bed_temperature = 65
+first_layer_temperature = 208
+temperature = 202
+

profile_sources/non-prusa-fff/Artillery/filament/Eolas Prints PLA Matte @Artillery.ini

@@ -0,0 +1,6 @@
+[filament:Eolas Prints PLA Matte @Artillery]
+inherits = Eolas Prints PLA @Artillery
+filament_cost = 25.50
+filament_max_volumetric_speed = 14
+temperature = 210
+

profile_sources/non-prusa-fff/Artillery/filament/Eolas Prints TPU 93A @Artillery.ini

@@ -0,0 +1,13 @@
+[filament:Eolas Prints TPU 93A @Artillery]
+inherits = *TPU*
+filament_vendor = Eolas Prints
+filament_cost = 34.99
+filament_density = 1.21
+filament_colour = #4D9398
+filament_max_volumetric_speed = 1.2
+temperature = 230
+first_layer_bed_temperature = 30
+bed_temperature = 30
+filament_retract_length = 0
+extrusion_multiplier = 1.16
+

profile_sources/non-prusa-fff/Artillery/filament/Generic ABS @Artillery.ini

@@ -0,0 +1,4 @@
+[filament:Generic ABS @Artillery]
+inherits = *ABS*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/Artillery/filament/Generic PETG @Artillery.ini

@@ -0,0 +1,4 @@
+[filament:Generic PETG @Artillery]
+inherits = *PET*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/Artillery/filament/Generic PLA @Artillery.ini

@@ -0,0 +1,4 @@
+[filament:Generic PLA @Artillery]
+inherits = *PLA*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/Artillery/filament/Generic TPU @Artillery.ini

@@ -0,0 +1,4 @@
+[filament:Generic TPU @Artillery]
+inherits = *TPU*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/Artillery/filament/_ABS_.ini

@@ -0,0 +1,20 @@
+[filament:*ABS*]
+inherits = *common*
+bed_temperature = 90
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #6603FC
+filament_cost = 20
+filament_density = 1.04
+filament_max_volumetric_speed = 11
+filament_type = ABS
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 0
+min_fan_speed = 0
+temperature = 240
+top_fan_speed = 0
+

profile_sources/non-prusa-fff/Artillery/filament/_PET_.ini

@@ -0,0 +1,19 @@
+[filament:*PET*]
+inherits = *common*
+bed_temperature = 70
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #42E9F5
+filament_cost = 30
+filament_density = 1.27
+filament_max_volumetric_speed = 8
+filament_type = PETG
+first_layer_bed_temperature = 70
+first_layer_temperature = 235
+max_fan_speed = 50
+min_fan_speed = 20
+temperature = 230
+

profile_sources/non-prusa-fff/Artillery/filament/_PLA_.ini

@@ -0,0 +1,20 @@
+[filament:*PLA*]
+inherits = *common*
+bed_temperature = 60
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #428AF5
+filament_cost = 20
+filament_density = 1.24
+filament_max_volumetric_speed = 15
+filament_type = PLA
+first_layer_bed_temperature = 65
+first_layer_temperature = 210
+full_fan_speed_layer = 3
+max_fan_speed = 100
+min_fan_speed = 100
+temperature = 205
+

profile_sources/non-prusa-fff/Artillery/filament/_TPU_.ini

@@ -0,0 +1,20 @@
+[filament:*TPU*]
+inherits = *common*
+bed_temperature = 55
+cooling = 0
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #CFFFFB
+filament_cost = 30
+filament_density = 1.2
+filament_max_volumetric_speed = 11
+filament_retract_before_travel = 4
+filament_retract_length = 2.5
+filament_retract_speed = 30
+filament_type = TPU
+first_layer_bed_temperature = 55
+first_layer_temperature = 210
+max_fan_speed = 70
+min_fan_speed = 0
+

profile_sources/non-prusa-fff/Artillery/filament/_common_.ini

@@ -0,0 +1,16 @@
+[filament:*common*]
+cooling = 1
+compatible_printers = 
+extrusion_multiplier = 1
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_print_speed = 15
+slowdown_below_layer_time = 15
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_Artillery.*/
+
+
+# Common filament preset

profile_sources/non-prusa-fff/Artillery/filament/_common_x3_.ini

@@ -0,0 +1,8 @@
+[filament:*common_x3*]
+inherits = *common_x3_x4*
+disable_fan_first_layers = 2
+filament_max_volumetric_speed = 0
+filament_retract_before_travel = 1
+filament_wipe = nil
+compatible_printers_condition = printer_model=~/(X3).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/filament/_common_x3_x4_.ini

@@ -0,0 +1,56 @@
+[filament:*common_x3_x4*]
+bridge_fan_speed = 100
+compatible_printers =
+compatible_printers_condition =
+compatible_prints_condition =
+cooling = 1
+enable_dynamic_fan_speeds = 0
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.98
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #E2E2E2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length_toolchange = nil
+filament_retract_lift = 0.1
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = Artillery
+full_fan_speed_layer = 0
+idle_temperature = nil
+inherits =
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 10
+overhang_fan_speed_0 = 0
+overhang_fan_speed_1 = 0
+overhang_fan_speed_2 = 0
+overhang_fan_speed_3 = 0
+slowdown_below_layer_time = 5
+start_filament_gcode = ; Filament gcode
+

profile_sources/non-prusa-fff/Artillery/filament/_common_x4_.ini

@@ -0,0 +1,8 @@
+[filament:*common_x4*]
+inherits = *common_x3_x4*
+disable_fan_first_layers = 1
+filament_retract_before_travel = 2
+filament_retract_speed = 40
+filament_wipe = 1
+compatible_printers_condition = printer_model=~/(X4).*/ and nozzle_diameter[0]==0.4
+