Initial Profile Sources

profile_sources/non-prusa-fff/Artillery/print/0.08mm SUPERDETAIL @Artillery.ini

@@ -0,0 +1,4 @@
+[print:0.08mm SUPERDETAIL @Artillery]
+inherits = *0.08mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.10mm HIGHDETAIL @Artillery.ini

@@ -0,0 +1,4 @@
+[print:0.10mm HIGHDETAIL @Artillery]
+inherits = *0.10mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.12mm DETAIL @Artillery.ini

@@ -0,0 +1,4 @@
+[print:0.12mm DETAIL @Artillery]
+inherits = *0.12mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.16mm OPTIMAL @Artillery.ini

@@ -0,0 +1,4 @@
+[print:0.16mm OPTIMAL @Artillery]
+inherits = *0.16mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.20mm NORMAL @Artillery.ini

@@ -0,0 +1,4 @@
+[print:0.20mm NORMAL @Artillery]
+inherits = *0.20mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.20mm SLOW @Artillery.ini

@@ -0,0 +1,14 @@
+[print:0.20mm SLOW @Artillery]
+inherits = *0.20mm*
+external_perimeter_speed = 15
+fill_density = 20%
+gap_fill_speed = 25
+infill_speed = 50
+perimeter_speed = 30
+perimeters = 3
+solid_infill_speed = 50
+top_solid_infill_speed = 25
+first_layer_speed = 15
+travel_speed = 100
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.20mm SPEED @Artillery.ini

@@ -0,0 +1,15 @@
+[print:0.20mm SPEED @Artillery]
+inherits = *0.20mm*
+external_perimeter_speed = 35
+fill_density = 15%
+fill_pattern = grid
+gap_fill_speed = 45
+infill_speed = 150
+infill_only_where_needed = 1
+perimeter_speed = 60
+perimeters = 2
+solid_infill_speed = 150
+top_solid_infill_speed = 50
+travel_speed = 170
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.24mm DRAFT @Artillery.ini

@@ -0,0 +1,4 @@
+[print:0.24mm DRAFT @Artillery]
+inherits = *0.24mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/0.28mm SUPERDRAFT @Artillery.ini

@@ -0,0 +1,4 @@
+[print:0.28mm SUPERDRAFT @Artillery]
+inherits = *0.28mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X3 TPU @Artillery.ini

@@ -0,0 +1,5 @@
+[print:ArtillerySlicer X3 TPU @Artillery]
+inherits = *common_x3*
+external_perimeter_speed = 30
+infill_speed = 30
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Max ABS @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Max ABS @Artillery]
+inherits = *common_x4_max*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 100
+solid_infill_speed = 100
+top_solid_infill_speed = 100
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery]
+inherits = *common_x4_max*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 150
+solid_infill_speed = 100
+top_solid_infill_speed = 100
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Max PLA HS @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Max PLA HS @Artillery]
+inherits = *common_x4_max*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 1
+infill_speed = 150
+solid_infill_speed = 100
+top_solid_infill_speed = 100
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Max PLA Silk @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Max PLA Silk @Artillery]
+inherits = *common_x4_max*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 150
+solid_infill_speed = 100
+top_solid_infill_speed = 100
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Max TPU @Artillery.ini

@@ -0,0 +1,3 @@
+[print:ArtillerySlicer X4 Max TPU @Artillery]
+inherits = *common_x4_max*; *common_x4_TPU*
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Plus ABS @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Plus ABS @Artillery]
+inherits = *common_x4_plus*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 100
+solid_infill_speed = 150
+top_solid_infill_speed = 150
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery]
+inherits = *common_x4_plus*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 150
+solid_infill_speed = 150
+top_solid_infill_speed = 150
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Plus PLA HS @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Plus PLA HS @Artillery]
+inherits = *common_x4_plus*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 1
+infill_speed = 150
+solid_infill_speed = 150
+top_solid_infill_speed = 150
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Plus PLA Silk @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Plus PLA Silk @Artillery]
+inherits = *common_x4_plus*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 150
+solid_infill_speed = 150
+top_solid_infill_speed = 150
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Plus TPU @Artillery.ini

@@ -0,0 +1,3 @@
+[print:ArtillerySlicer X4 Plus TPU @Artillery]
+inherits = *common_x4_plus*; *common_x4_TPU*
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Pro ABS @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Pro ABS @Artillery]
+inherits = *common_x4_pro*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 100
+solid_infill_speed = 200
+top_solid_infill_speed = 200
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery]
+inherits = *common_x4_pro*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 300
+solid_infill_speed = 200
+top_solid_infill_speed = 200
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Pro PLA HS @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Pro PLA HS @Artillery]
+inherits = *common_x4_pro*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 1
+infill_speed = 300
+solid_infill_speed = 200
+top_solid_infill_speed = 200
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Pro PLA Silk @Artillery.ini

@@ -0,0 +1,7 @@
+[print:ArtillerySlicer X4 Pro PLA Silk @Artillery]
+inherits = *common_x4_pro*; *common_x4_ABS_PETG_PLA*
+avoid_crossing_perimeters = 0
+infill_speed = 150
+solid_infill_speed = 200
+top_solid_infill_speed = 200
+

profile_sources/non-prusa-fff/Artillery/print/ArtillerySlicer X4 Pro TPU @Artillery.ini

@@ -0,0 +1,8 @@
+[print:ArtillerySlicer X4 Pro TPU @Artillery]
+inherits = *common_x4_pro*; *common_x4_TPU*
+
+###############
+## FILAMENTS ##
+###############
+
+# Common filament preset

profile_sources/non-prusa-fff/Artillery/print/X3 Default (0.20mm) @Artillery.ini

@@ -0,0 +1,26 @@
+[print:X3 Default (0.20mm) @Artillery]
+inherits = *common_x3*
+first_layer_height = 0.2
+perimeters = 2
+seam_position = random
+infill_anchor = 400%
+small_perimeter_speed = 50%
+external_perimeter_speed = 120
+infill_speed = 150
+support_material_speed = 200
+bridge_speed = 70
+gap_fill_speed = 120
+overhang_speed_0 = 80%
+overhang_speed_1 = 50
+overhang_speed_2 = 30
+overhang_speed_3 = 10
+travel_speed = 350
+first_layer_speed = 50
+first_layer_acceleration = 1000
+extrusion_width = 0.4
+first_layer_extrusion_width = 0.5
+perimeter_extrusion_width = 0.4
+infill_overlap = 35%
+resolution = 0.012
+gcode_resolution = 0.012
+

profile_sources/non-prusa-fff/Artillery/print/_0.08mm_.ini

@@ -0,0 +1,8 @@
+[print:*0.08mm*]
+inherits = *common*
+default_acceleration = 500
+layer_height = 0.08
+perimeters = 3
+bottom_solid_layers = 9
+top_solid_layers = 11
+

profile_sources/non-prusa-fff/Artillery/print/_0.10mm_.ini

@@ -0,0 +1,8 @@
+[print:*0.10mm*]
+inherits = *common*
+default_acceleration = 500
+layer_height = 0.1
+perimeters = 3
+bottom_solid_layers = 7
+top_solid_layers = 9
+

profile_sources/non-prusa-fff/Artillery/print/_0.12mm_.ini

@@ -0,0 +1,8 @@
+[print:*0.12mm*]
+inherits = *common*
+default_acceleration = 500
+layer_height = 0.12
+perimeters = 3
+bottom_solid_layers = 6
+top_solid_layers = 7
+

profile_sources/non-prusa-fff/Artillery/print/_0.16mm_.ini

@@ -0,0 +1,6 @@
+[print:*0.16mm*]
+inherits = *common*
+layer_height = 0.16
+bottom_solid_layers = 5
+top_solid_layers = 7
+

profile_sources/non-prusa-fff/Artillery/print/_0.20mm_.ini

@@ -0,0 +1,6 @@
+[print:*0.20mm*]
+inherits = *common*
+layer_height = 0.20
+bottom_solid_layers = 4
+top_solid_layers = 5
+

profile_sources/non-prusa-fff/Artillery/print/_0.24mm_.ini

@@ -0,0 +1,7 @@
+[print:*0.24mm*]
+inherits = *common*
+layer_height = 0.24
+top_infill_extrusion_width = 0.45
+bottom_solid_layers = 3
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/Artillery/print/_0.28mm_.ini

@@ -0,0 +1,9 @@
+[print:*0.28mm*]
+inherits = *common*
+layer_height = 0.28
+first_layer_height = 0.36
+top_infill_extrusion_width = 0.45
+first_layer_extrusion_width = 0.75
+bottom_solid_layers = 3
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/Artillery/print/_common_.ini

@@ -0,0 +1,110 @@
+[print:*common*]
+# V2.2 #
+#bottom_fill_pattern = rectilinear
+#top_fill_pattern = rectilinear
+#fill_pattern = cubic
+# V2.3 #
+top_fill_pattern = monotonic
+bottom_fill_pattern = monotonic
+fill_pattern = adaptivecubic
+
+avoid_crossing_perimeters = 0
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.78
+bridge_speed = 20
+# brim_width = 5
+bottom_solid_min_thickness = 1.2
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 25
+external_perimeters_first = 0
+extra_perimeters = 0
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 15%
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.25
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 1
+gcode_label_objects = 1
+infill_acceleration = 1000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 50
+interface_shells = 0
+max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+overhangs = 1
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeters = 3
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 45
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirts = 1
+skirt_distance = 6
+skirt_height = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.15
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 1
+travel_speed = 130
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 30
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0
+

profile_sources/non-prusa-fff/Artillery/print/_common_x3_.ini

@@ -0,0 +1,17 @@
+[print:*common_x3*]
+inherits = *common_x3_x4*
+compatible_printers_condition = printer_model=~/(X3).*/ and nozzle_diameter[0]==0.4
+avoid_crossing_perimeters = 0
+bridge_acceleration = 1000
+default_acceleration = 3000
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 1500
+external_perimeter_extrusion_width = 0.45
+fill_density = 5%
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0.42
+infill_overlap = 25%
+max_print_speed = 400
+solid_infill_speed = 150
+top_solid_infill_speed = 150
+

profile_sources/non-prusa-fff/Artillery/print/_common_x3_x4_.ini

@@ -0,0 +1,77 @@
+[print:*common_x3_x4*]
+avoid_crossing_curled_overhangs = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 30
+brim_separation = 0
+brim_type = outer_only
+brim_width = 0
+compatible_printers =
+compatible_printers_condition =
+complete_objects = 0
+dont_support_bridges = 1
+draft_shield = disabled
+elefant_foot_compensation = 0
+external_perimeters_first = 0
+extra_perimeters = 1
+extra_perimeters_on_overhangs = 0
+extrusion_width = 0.45
+fill_angle = 45
+fill_pattern = alignedrectilinear
+first_layer_acceleration_over_raft = 0
+first_layer_height = 0.25
+first_layer_speed = 30
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 20
+gcode_comments = 0
+gcode_label_objects = 0
+gcode_resolution = 0.0125
+gcode_substitutions =
+infill_acceleration = 0
+infill_anchor = 600%
+infill_anchor_max = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+inherits =
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_bead_width = 85%
+min_feature_size = 25%
+min_skirt_length = 0
+mmu_segmented_region_interlocking_depth = 0
+mmu_segmented_region_max_width = 0
+notes =
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeter_acceleration = 1500
+perimeter_speed = 120
+seam_position = rear
+skirts = 0
+skirt_distance = 0
+small_perimeter_speed = 25
+solid_infill_extrusion_width = 0.45
+support_material_extrusion_width = 0.35
+top_infill_extrusion_width = 0.4
+travel_acceleration = 3000
+travel_speed = 250
+external_perimeter_extrusion_width = 0.4
+

profile_sources/non-prusa-fff/Artillery/print/_common_x4_.ini

@@ -0,0 +1,8 @@
+[print:*common_x4*]
+inherits = *common_x3_x4*
+bridge_acceleration = 3000
+external_perimeter_acceleration = 3000
+first_layer_acceleration = 3000
+first_layer_extrusion_width = 0.5
+infill_overlap = 75%
+

profile_sources/non-prusa-fff/Artillery/print/_common_x4_ABS_PETG_PLA_.ini

@@ -0,0 +1,4 @@
+[print:*common_x4_ABS_PETG_PLA*]
+external_perimeter_speed = 50%
+max_print_speed = 300
+

profile_sources/non-prusa-fff/Artillery/print/_common_x4_TPU_.ini

@@ -0,0 +1,10 @@
+[print:*common_x4_TPU*]
+avoid_crossing_perimeters = 0
+enable_dynamic_overhang_speeds = 0
+external_perimeter_speed = 30
+fill_density = 15%
+infill_speed = 30
+max_print_speed = 60
+solid_infill_speed = 30
+top_solid_infill_speed = 30
+

profile_sources/non-prusa-fff/Artillery/print/_common_x4_max_.ini

@@ -0,0 +1,5 @@
+[print:*common_x4_max*]
+inherits = *common_x4*
+default_acceleration = 3000
+compatible_printers_condition = printer_model=~/(X4 Max).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/_common_x4_plus_.ini

@@ -0,0 +1,5 @@
+[print:*common_x4_plus*]
+inherits = *common_x4*
+default_acceleration = 5000
+compatible_printers_condition = printer_model=~/(X4 Plus).*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Artillery/print/_common_x4_pro_.ini

@@ -0,0 +1,5 @@
+[print:*common_x4_pro*]
+inherits = *common_x4*
+default_acceleration = 10000
+compatible_printers_condition = printer_model=~/(X4 Pro).*/ and nozzle_diameter[0]==0.4
+