Initial Profile Sources

2026-10-01 18:17:21 +00:00 · 2026-03-19 01:54:47 +00:00
parent 7e2e8f9d47
commit 1f7873734a
13374 changed files with 256890 additions and 0 deletions
@@ -0,0 +1,9 @@
+[printer:Artillery Genius BL-TOUCH]
+inherits = *common_UPD_FW*
+renamed_from = "Genius BL-TOUCH"
+printer_model = Genius
+printer_variant = 0.4
+bed_shape = 0x0,220x0,220x220,0x220
+max_print_height = 250
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Genius
+
@@ -0,0 +1,9 @@
+[printer:Artillery Genius]
+inherits = *common_STOCK_FW*
+renamed_from = "Genius"
+printer_model = Genius
+printer_variant = 0.4
+bed_shape = 0x0,220x0,220x220,0x220
+max_print_height = 250
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Genius
+
@@ -0,0 +1,9 @@
+[printer:Artillery Hornet]
+inherits = *bowden*
+printer_model = Hornet
+printer_variant = 0.4
+bed_shape = 0x0,220x0,220x220,0x220
+max_print_height = 250
+machine_limits_usage = time_estimate_only
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Hornet\nPRINTER_HAS_Bowden
+
@@ -0,0 +1,9 @@
+[printer:Artillery Sidewinder X1 BL-TOUCH]
+inherits = *common_UPD_FW*
+renamed_from = "Sidewinder X1 BL-TOUCH"
+printer_model = X1
+printer_variant = 0.4
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 400
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_X1
+
@@ -0,0 +1,9 @@
+[printer:Artillery Sidewinder X1]
+inherits = *common_STOCK_FW*
+renamed_from = "Sidewinder X1"
+printer_model = X1
+printer_variant = 0.4
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 400
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_X1
+
@@ -0,0 +1,7 @@
+[printer:Artillery Sidewinder X3 Plus]
+inherits = *common_X3*
+printer_model = X3 Plus
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 400
+printer_notes = 
+
@@ -0,0 +1,7 @@
+[printer:Artillery Sidewinder X3 Pro]
+inherits = *common_X3*
+printer_model = X3 Pro
+bed_shape = 0x0,240x0,240x240,0x240
+max_print_height = 260
+printer_notes = 
+
@@ -0,0 +1,17 @@
+[printer:Artillery Sidewinder X4 Max]
+inherits = *common_X4*
+printer_model = X4 Max
+bed_shape = 0x0,500x0,500x500,0x500
+default_print_profile = ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery
+machine_max_feedrate_e = 100,120
+machine_max_feedrate_z = 13,12
+machine_max_jerk_e = 10,2.5
+machine_max_jerk_x = 20,10
+machine_max_jerk_y = 20,10
+max_print_height = 500
+end_gcode = G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X5 Y480 F3000;\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
+
+###########
+## PRINT ##'
+###########
+# Common print preset
@@ -0,0 +1,13 @@
+[printer:Artillery Sidewinder X4 Plus]
+inherits = *common_X4*
+printer_model = X4 Plus
+bed_shape = 0x0,300x0,300x300,0x300
+default_print_profile = ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery
+machine_max_feedrate_e = 100,120
+machine_max_feedrate_z = 13,12
+machine_max_jerk_e = 10,2.5
+machine_max_jerk_x = 20,10
+machine_max_jerk_y = 20,10
+max_print_height = 400
+end_gcode = G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X5 Y280 F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
+
@@ -0,0 +1,13 @@
+[printer:Artillery Sidewinder X4 Pro]
+inherits = *common_X4*
+printer_model = X4 Pro
+bed_shape = 0x0,240x0,240x240,0x240
+default_print_profile = ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_z = 13,13
+machine_max_jerk_e = 2.5,2.5
+machine_max_jerk_x = 10,10
+machine_max_jerk_y = 10,10
+max_print_height = 260
+end_gcode = G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X5 Y220 F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z
+
@@ -0,0 +1,7 @@
+[printer:*0.4nozzle*]
+nozzle_diameter = 0.4
+max_layer_height = 0.32
+min_layer_height = 0.04
+printer_variant = 0.4
+default_print_profile = 0.20mm NORMAL @Artillery
+
@@ -0,0 +1,7 @@
+[printer:*bowden*]
+inherits = *common_STOCK_FW*
+retract_length = 5
+retract_lift = 0.1
+retract_before_wipe = 50%
+default_filament_profile = Generic PLA @Artillery
+
@@ -0,0 +1,60 @@
+[printer:*common*]
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0
+between_objects_gcode = 
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = Generic PLA @Artillery
+default_print_profile = 0.20mm NORMAL @Artillery
+deretract_speed = 0
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = marlin
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+machine_limits_usage = emit_to_gcode
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 1250,1250
+machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_x = 1000,960
+machine_max_acceleration_y = 1000,960
+machine_max_acceleration_z = 1000,1000
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 200,100
+machine_max_feedrate_y = 200,100
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 1.5,1.5
+machine_max_jerk_x = 8,8
+machine_max_jerk_y = 8,8
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0.25
+max_print_height = 250
+min_layer_height = 0.07
+nozzle_diameter = 0.4
+pause_print_gcode = 
+printer_technology = FFF
+remaining_times = 0
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 4
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 380
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+silent_mode = 0
+single_extruder_multi_material = 0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
+end_gcode = G4 ; wait\nG92 E0 ; prepare to retract\nG1 E-0.5 F3000; retract to avoid stringing\n\n; Anti-stringing end wiggle\nG91 ; use relative coordinates\nG1 X1 Y1 F1200\n\n; Raise nozzle and present bed\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+120, max_print_height)}{endif} ; Move print head up\nG90 ; use absolute coordinates\n\n; Reset print setting overrides\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Shut down printer\nM106 S0 ; turn-off fan\nM104 S0 ; turn-off hotend\nM140 S0 ; turn-off bed\nM150 P0 ; turn off led\nM85 S0 ; deactivate idle timeout\nM84 ; disable motors\n
+
@@ -0,0 +1,4 @@
+[printer:*common_STOCK_FW*]
+inherits = *common*
+start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature] ; wait for bed to heat up\nM104 S[first_layer_temperature] ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}
+
@@ -0,0 +1,4 @@
+[printer:*common_UPD_FW*]
+inherits = *common*
+start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM900 K0.12 ; K factor\nM900 W[extrusion_width] H[layer_height] D[filament_diameter]\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature] ; wait for bed to heat up\nM104 S[first_layer_temperature] ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n;Auto bed Leveling\n@BEDLEVELVISUALIZER\nG29 ; ABL T\nM420 S1 Z3 ; reload and fade mesh bed leveling until it reach 3mm Z\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}
+
@@ -0,0 +1,22 @@
+[printer:*common_X3*]
+inherits = *common_X3_X4*
+default_filament_profile = Artillery PLA @X3
+default_print_profile = X3 Default (0.20mm) @Artillery
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+end_gcode = ; After G-Code\nG4 ; wait\nG92 E0 ; prepare to retract\nG1 E-1.5 F3000; retract to avoid stringing\n\n; Anti-stringing end wiggle\nG91 ; use relative coordinates\nG1 X1 Y1 F1200\n\n; Raise nozzle and present bed\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+120, max_print_height)}{endif} ; move print head up\nG90 ; use absolute coordinates\n\n; Reset print setting overrides\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Shut down printer\nM106 S0 ; turn-off fan\nM104 S0 ; turn-off hotend\nM140 S0 ; turn-off bed\nM150 P0 ; turn off led\nM84 ; disable motors\n
+gcode_flavor = marlin2
+machine_max_acceleration_travel = 3000,1250
+machine_max_acceleration_x = 3000,1000
+machine_max_acceleration_y = 3000,1000
+machine_max_acceleration_z = 500,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 500,200
+machine_max_feedrate_y = 500,200
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 2.5,2.5
+machine_max_jerk_x = 10,10
+machine_max_jerk_y = 10,10
+retract_before_travel = 2
+retract_speed = 35
+
@@ -0,0 +1,56 @@
+[printer:*common_X3_X4*]
+autoemit_temperature_commands = 1
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+deretract_speed = 0
+extra_loading_move = -2
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+high_current_on_filament_swap = 0
+host_type = prusalink
+inherits = 
+machine_limits_usage = emit_to_gcode
+machine_max_acceleration_e = 10000,5000
+machine_max_acceleration_extruding = 10000,1250
+machine_max_acceleration_retracting = 10000,1250
+machine_max_jerk_z = 0.2,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0.25
+min_layer_height = 0.07
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = M601
+print_host = 
+printer_settings_id = 
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+remaining_times = 0
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 0.8
+retract_length_toolchange = 10
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 380
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+silent_mode = 1
+single_extruder_multi_material = 0
+template_custom_gcode = 
+thumbnails = 256x256
+thumbnails_format = PNG
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
+start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM140 S[first_layer_bed_temperature] ; start bed heating\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\n\n; Auto bed Leveling\n@BEDLEVELVISUALIZER\nG29 ; perform bed leveling\nM420 S1 Z3 ; reload and fade mesh bed leveling until it reach 3mm Z\n\n; Wait for final heating\nG1 Z10 F3000 ; move z up little to prevent scratching of surface\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\n\n; Сlean nozzle\nG92 E0 ; reset extruder\nG1 X150 Y{print_bed_size[1]-0.25} Z0.25 F5000.0 ; move to start position\nG1 X100 Y{print_bed_size[1]-0.25} Z0.25 F1500.0 E30 ; draw the first line\nG1 Z10 F3000 ; move z up little to prevent scratching\nG12 C2 ; clean nozzle\nG1 X25 Y{print_bed_size[1]-0.5} Z0.25 F5000.0 ; move to side a little\nG1 X90 Y{print_bed_size[1]-0.5} Z0.25 F1500.0 E15 ; draw the second line\nG92 E0 ; reset extruder\n\nM221 S{if layer_height<0.075}100{else}95{endif}\n
+
@@ -0,0 +1,17 @@
+[printer:*common_X4*]
+inherits = *common_X3_X4*
+default_filament_profile = Artillery PLA & PLA HS @X4
+before_layer_gcode = 
+layer_gcode = 
+gcode_flavor = klipper
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_travel = 1500,1250
+machine_max_acceleration_x = 10000,1000
+machine_max_acceleration_y = 10000,1000
+machine_max_acceleration_z = 200,200
+machine_max_feedrate_x = 500,500
+machine_max_feedrate_y = 500,500
+printer_notes = 
+retract_before_travel = 1.5
+retract_speed = 35
+