Initial Profile Sources

profile_sources/non-prusa-fff/BIBO/print/0.05mm ULTRADETAIL @BIBO2.ini

@@ -0,0 +1,5 @@
+[print:0.05mm ULTRADETAIL @BIBO2]
+inherits = *0.05mm*
+# alias = 0.05mm ULTRADETAIL
+infill_extrusion_width = 0.5
+

profile_sources/non-prusa-fff/BIBO/print/0.07mm SUPERDETAIL @BIBO2.ini

@@ -0,0 +1,5 @@
+[print:0.07mm SUPERDETAIL @BIBO2]
+inherits = *0.07mm*
+# alias = 0.07mm SUPERDETAIL
+infill_extrusion_width = 0.5
+

profile_sources/non-prusa-fff/BIBO/print/0.10mm HIGHDETAIL @BIBO2.ini

@@ -0,0 +1,5 @@
+[print:0.10mm HIGHDETAIL @BIBO2]
+inherits = *0.10mm*
+# alias = 0.10mm HIGHDETAIL
+infill_extrusion_width = 0.5
+

profile_sources/non-prusa-fff/BIBO/print/0.12mm DETAIL @BIBO2.ini

@@ -0,0 +1,9 @@
+[print:0.12mm DETAIL @BIBO2]
+inherits = *0.12mm*
+# alias = 0.12mm DETAIL
+travel_speed = 130
+infill_speed = 50
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+support_material_extrusion_width = 0.38
+

profile_sources/non-prusa-fff/BIBO/print/0.15mm OPTIMAL @BIBO2.ini

@@ -0,0 +1,5 @@
+[print:0.15mm OPTIMAL @BIBO2]
+inherits = *0.15mm*
+# alias = 0.15mm OPTIMAL
+top_infill_extrusion_width = 0.45
+

profile_sources/non-prusa-fff/BIBO/print/0.15mm OPTIMAL SOLUBLE FULL @BIBO2.ini

@@ -0,0 +1,11 @@
+[print:0.15mm OPTIMAL SOLUBLE FULL @BIBO2]
+inherits = 0.15mm OPTIMAL @BIBO2; *soluble_support*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
+external_perimeter_speed = 25
+notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
+support_material_extruder = 2
+perimeter_speed = 40
+solid_infill_speed = 40
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 30
+

profile_sources/non-prusa-fff/BIBO/print/0.15mm OPTIMAL SOLUBLE INTERFACE @BIBO2.ini

@@ -0,0 +1,7 @@
+[print:0.15mm OPTIMAL SOLUBLE INTERFACE @BIBO2]
+inherits = 0.15mm OPTIMAL SOLUBLE FULL @BIBO2
+notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
+support_material_interface_layers = 3
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+

profile_sources/non-prusa-fff/BIBO/print/0.20mm NORMAL @BIBO2.ini

@@ -0,0 +1,9 @@
+[print:0.20mm NORMAL @BIBO2]
+inherits = *0.20mm*
+# alias = 0.20mm NORMAL
+travel_speed = 130
+infill_speed = 50
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+support_material_extrusion_width = 0.38
+

profile_sources/non-prusa-fff/BIBO/print/0.20mm NORMAL SOLUBLE FULL @BIBO2.ini

@@ -0,0 +1,10 @@
+[print:0.20mm NORMAL SOLUBLE FULL @BIBO2]
+inherits = 0.20mm NORMAL @BIBO2; *soluble_support*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
+external_perimeter_speed = 30
+notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
+support_material_extruder = 2
+perimeter_speed = 40
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+

profile_sources/non-prusa-fff/BIBO/print/0.20mm NORMAL SOLUBLE INTERFACE @BIBO2.ini

@@ -0,0 +1,12 @@
+[print:0.20mm NORMAL SOLUBLE INTERFACE @BIBO2]
+inherits = 0.20mm NORMAL SOLUBLE FULL @BIBO2
+notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
+support_material_interface_layers = 3
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+
+# XXXXXXXXXXXXXXXXXXXXXX
+# XXX--- filament ---XXX
+# XXXXXXXXXXXXXXXXXXXXXX
+
+# Common filament preset

profile_sources/non-prusa-fff/BIBO/print/0.24mm DRAFT @BIBO2.ini

@@ -0,0 +1,9 @@
+[print:0.24mm DRAFT @BIBO2]
+inherits = *0.24mm*
+# alias = 0.24mm DRAFT
+travel_speed = 130
+infill_speed = 50
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+support_material_extrusion_width = 0.38
+

profile_sources/non-prusa-fff/BIBO/print/0.28mm SUPERDRAFT @BIBO2.ini

@@ -0,0 +1,9 @@
+[print:0.28mm SUPERDRAFT @BIBO2]
+inherits = *0.28mm*
+# alias = 0.28mm SUPERDRAFT
+travel_speed = 130
+infill_speed = 50
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+support_material_extrusion_width = 0.38
+

profile_sources/non-prusa-fff/BIBO/print/0.30mm ULTRADRAFT @BIBO2.ini

@@ -0,0 +1,24 @@
+[print:0.30mm ULTRADRAFT @BIBO2]
+inherits = *0.30mm*
+# alias = 0.30mm ULTRADRAFT
+bottom_solid_layers = 3
+bridge_speed = 30
+external_perimeter_speed = 30
+infill_acceleration = 1100
+infill_speed = 55
+max_print_speed = 60
+perimeter_speed = 50
+small_perimeter_speed = 30
+solid_infill_speed = 50
+top_solid_infill_speed = 40
+support_material_speed = 45
+external_perimeter_extrusion_width = 0.6
+extrusion_width = 0.5
+first_layer_extrusion_width = 0.42
+infill_extrusion_width = 0.5
+perimeter_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+top_infill_extrusion_width = 0.45
+support_material_extrusion_width = 0.38
+
+# Soluble Supports Profiles for dual extrusion #

profile_sources/non-prusa-fff/BIBO/print/_0.05mm_.ini

@@ -0,0 +1,25 @@
+[print:*0.05mm*]
+inherits = *common*
+bottom_solid_layers = 10
+bridge_acceleration = 300
+bridge_flow_ratio = 0.7
+default_acceleration = 500
+external_perimeter_speed = 20
+fill_density = 20%
+first_layer_acceleration = 250
+gap_fill_speed = 20
+infill_acceleration = 800
+infill_speed = 30
+max_print_speed = 60
+small_perimeter_speed = 20
+solid_infill_speed = 30
+support_material_extrusion_width = 0.3
+support_material_spacing = 1.5
+layer_height = 0.05
+perimeter_acceleration = 300
+perimeter_speed = 30
+perimeters = 3
+support_material_speed = 30
+top_solid_infill_speed = 20
+top_solid_layers = 15
+

profile_sources/non-prusa-fff/BIBO/print/_0.07mm_.ini

@@ -0,0 +1,26 @@
+[print:*0.07mm*]
+inherits = *common*
+bottom_solid_layers = 8
+bridge_acceleration = 300
+bridge_flow_ratio = 0.7
+bridge_speed = 20
+default_acceleration = 1000
+external_perimeter_speed = 20
+fill_density = 15%
+first_layer_acceleration = 500
+gap_fill_speed = 20
+infill_acceleration = 800
+infill_speed = 40
+max_print_speed = 60
+small_perimeter_speed = 20
+solid_infill_speed = 40
+support_material_extrusion_width = 0.3
+support_material_spacing = 1.5
+layer_height = 0.07
+perimeter_acceleration = 300
+perimeter_speed = 30
+perimeters = 3
+support_material_speed = 40
+top_solid_infill_speed = 30
+top_solid_layers = 11
+

profile_sources/non-prusa-fff/BIBO/print/_0.10mm_.ini

@@ -0,0 +1,8 @@
+[print:*0.10mm*]
+inherits = *common*
+bottom_solid_layers = 7
+bridge_flow_ratio = 0.7
+layer_height = 0.1
+perimeter_acceleration = 800
+top_solid_layers = 9
+

profile_sources/non-prusa-fff/BIBO/print/_0.12mm_.ini

@@ -0,0 +1,12 @@
+[print:*0.12mm*]
+inherits = *common*
+perimeter_speed = 40
+external_perimeter_speed = 25
+infill_speed = 50
+solid_infill_speed = 40
+layer_height = 0.12
+perimeters = 3
+top_infill_extrusion_width = 0.4
+bottom_solid_layers = 6
+top_solid_layers = 7
+

profile_sources/non-prusa-fff/BIBO/print/_0.15mm_.ini

@@ -0,0 +1,13 @@
+[print:*0.15mm*]
+inherits = *common*
+external_perimeter_speed = 25
+infill_acceleration = 1100
+infill_speed = 50
+layer_height = 0.15
+perimeter_acceleration = 800
+perimeter_speed = 40
+solid_infill_speed = 40
+top_infill_extrusion_width = 0.4
+bottom_solid_layers = 5
+top_solid_layers = 7
+

profile_sources/non-prusa-fff/BIBO/print/_0.20mm_.ini

@@ -0,0 +1,11 @@
+[print:*0.20mm*]
+inherits = *common*
+perimeter_speed = 40
+external_perimeter_speed = 25
+infill_speed = 50
+solid_infill_speed = 40
+layer_height = 0.20
+top_infill_extrusion_width = 0.4
+bottom_solid_layers = 4
+top_solid_layers = 5
+

profile_sources/non-prusa-fff/BIBO/print/_0.24mm_.ini

@@ -0,0 +1,11 @@
+[print:*0.24mm*]
+inherits = *common*
+perimeter_speed = 40
+external_perimeter_speed = 25
+infill_speed = 50
+solid_infill_speed = 40
+layer_height = 0.24
+top_infill_extrusion_width = 0.45
+bottom_solid_layers = 3
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/BIBO/print/_0.28mm_.ini

@@ -0,0 +1,11 @@
+[print:*0.28mm*]
+inherits = *common*
+perimeter_speed = 40
+external_perimeter_speed = 25
+infill_speed = 50
+solid_infill_speed = 40
+layer_height = 0.28
+top_infill_extrusion_width = 0.45
+bottom_solid_layers = 3
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/BIBO/print/_0.30mm_.ini

@@ -0,0 +1,14 @@
+[print:*0.30mm*]
+inherits = *common*
+bottom_solid_layers = 4
+bridge_flow_ratio = 0.95
+external_perimeter_speed = 25
+infill_acceleration = 1100
+infill_speed = 60
+layer_height = 0.3
+perimeter_acceleration = 800
+perimeter_speed = 50
+solid_infill_speed = 50
+top_infill_extrusion_width = 0.4
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/BIBO/print/_common_.ini

@@ -0,0 +1,96 @@
+[print:*common*]
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = monotonic
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+dont_support_bridges = 1
+elefant_foot_compensation = 0.3
+ensure_vertical_shell_thickness = 0
+external_fill_pattern = monotonic
+external_perimeters_first = 0
+external_perimeter_extrusion_width = 0.40
+external_perimeter_speed = 25
+extra_perimeters = 0
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 15%
+fill_pattern = supportcubic
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+gap_fill_speed = 15
+gcode_comments = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+interface_shells = 0
+max_print_speed = 60
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+overhangs = 1
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{if num_extruders==1}{filament_type[0]}{else}E1{filament_type[0]}_E2{filament_type[1]}{endif}_{printer_model}_{print_time}.gcode
+perimeters = 3
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_generator = arachne
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 0
+skirts = 3
+skirt_distance = 2
+skirt_height = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.40
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.15
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 40
+support_material_style = organic
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 61%
+thin_walls = 0
+top_infill_extrusion_width = 0.40
+top_solid_infill_speed = 20
+travel_speed = 130
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 50
+wipe_tower_y = 50
+xy_size_compensation = 0
+

profile_sources/non-prusa-fff/BIBO/print/_soluble_support_.ini

@@ -0,0 +1,21 @@
+[print:*soluble_support*]
+inherits = *common*
+overhangs = 1
+skirts = 0
+support_material = 1
+support_material_contact_distance = 0
+support_material_extruder = 2
+support_material_extrusion_width = 0.45
+support_material_interface_extruder = 2
+support_material_interface_layers = 3
+support_material_interface_spacing = 0.1
+support_material_synchronize_layers = 1
+support_material_threshold = 80
+support_material_with_sheath = 1
+wipe_tower_bridging = 6
+support_material_interface_speed = 80%
+perimeter_speed = 40
+solid_infill_speed = 40
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 30
+