Initial Profile Sources

profile_sources/non-prusa-fff/BIQU/print/0.08mm HIGHDETAIL @BIQU.ini

@@ -0,0 +1,4 @@
+[print:0.08mm HIGHDETAIL @BIQU]
+inherits = *0.08mm*
+compatible_printers_condition = printer_model=~/(BIQUBX).*/
+

profile_sources/non-prusa-fff/BIQU/print/0.10mm HIGHDETAIL @BIQU.ini

@@ -0,0 +1,4 @@
+[print:0.10mm HIGHDETAIL @BIQU]
+inherits = *0.10mm*
+compatible_printers_condition = printer_model=~/(BIQUBX).*/
+

profile_sources/non-prusa-fff/BIQU/print/0.12mm DETAIL @BIQU.ini

@@ -0,0 +1,4 @@
+[print:0.12mm DETAIL @BIQU]
+inherits = *0.12mm*
+compatible_printers_condition = printer_model=~/(BIQUBX).*/
+

profile_sources/non-prusa-fff/BIQU/print/0.16mm OPTIMAL @BIQU.ini

@@ -0,0 +1,4 @@
+[print:0.16mm OPTIMAL @BIQU]
+inherits = *0.16mm*
+compatible_printers_condition = printer_model=~/(BIQUBX).*/
+

profile_sources/non-prusa-fff/BIQU/print/0.20mm NORMAL @BIQU.ini

@@ -0,0 +1,4 @@
+[print:0.20mm NORMAL @BIQU]
+inherits = *0.20mm*
+compatible_printers_condition = printer_model=~/(BIQUBX).*/
+

profile_sources/non-prusa-fff/BIQU/print/0.24mm DRAFT @BIQU.ini

@@ -0,0 +1,4 @@
+[print:0.24mm DRAFT @BIQU]
+inherits = *0.24mm*
+compatible_printers_condition = printer_model=~/(BIQUBX).*/
+

profile_sources/non-prusa-fff/BIQU/print/0.28mm SUPERDRAFT @BIQU.ini

@@ -0,0 +1,4 @@
+[print:0.28mm SUPERDRAFT @BIQU]
+inherits = *0.28mm*
+compatible_printers_condition = printer_model=~/(BIQUBX).*/
+

profile_sources/non-prusa-fff/BIQU/print/_0.08mm_.ini

@@ -0,0 +1,8 @@
+[print:*0.08mm*]
+inherits = *common*
+layer_height = 0.08
+perimeters = 3
+bottom_solid_layers = 9
+top_solid_layers = 11
+bridge_flow_ratio = 0.7
+

profile_sources/non-prusa-fff/BIQU/print/_0.10mm_.ini

@@ -0,0 +1,8 @@
+[print:*0.10mm*]
+inherits = *common*
+layer_height = 0.10
+perimeters = 3
+bottom_solid_layers = 7
+top_solid_layers = 9
+bridge_flow_ratio = 0.7
+

profile_sources/non-prusa-fff/BIQU/print/_0.12mm_.ini

@@ -0,0 +1,8 @@
+[print:*0.12mm*]
+inherits = *common*
+layer_height = 0.12
+perimeters = 3
+bottom_solid_layers = 6
+top_solid_layers = 7
+bridge_flow_ratio = 0.7
+

profile_sources/non-prusa-fff/BIQU/print/_0.16mm_.ini

@@ -0,0 +1,7 @@
+[print:*0.16mm*]
+inherits = *common*
+layer_height = 0.16
+bottom_solid_layers = 5
+top_solid_layers = 7
+bridge_flow_ratio = 0.85
+

profile_sources/non-prusa-fff/BIQU/print/_0.20mm_.ini

@@ -0,0 +1,6 @@
+[print:*0.20mm*]
+inherits = *common*
+layer_height = 0.20
+bottom_solid_layers = 4
+top_solid_layers = 5
+

profile_sources/non-prusa-fff/BIQU/print/_0.24mm_.ini

@@ -0,0 +1,6 @@
+[print:*0.24mm*]
+inherits = *common*
+layer_height = 0.24
+bottom_solid_layers = 3
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/BIQU/print/_0.28mm_.ini

@@ -0,0 +1,6 @@
+[print:*0.28mm*]
+inherits = *common*
+layer_height = 0.28
+bottom_solid_layers = 3
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/BIQU/print/_0.32mm_.ini

@@ -0,0 +1,6 @@
+[print:*0.32mm*]
+inherits = *common*
+layer_height = 0.32
+bottom_solid_layers = 3
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/BIQU/print/_common_.ini

@@ -0,0 +1,98 @@
+[print:*common*]
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = monotonic
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+complete_objects = 0
+bridge_acceleration = 250
+perimeter_acceleration = 500
+infill_acceleration = 500
+first_layer_acceleration = 500
+default_acceleration = 500
+dont_support_bridges = 1
+ensure_vertical_shell_thickness = 1
+external_perimeters_first = 0
+external_perimeter_speed = 25
+extra_perimeters = 0
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_height = 0.2
+elefant_foot_compensation = 0.1
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 50
+interface_shells = 0
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
+perimeters = 2
+perimeter_extruder = 1
+perimeter_speed = 40
+raft_layers = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirts = 1
+skirt_distance = 3
+skirt_height = 2
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_extruder = 0
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.15
+support_material_bottom_contact_distance = 0.15
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_solid_first_layer = 1
+support_material_spacing = 2
+support_material_speed = 40
+support_material_synchronize_layers = 0
+support_material_threshold = 40
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_perimeters = 1
+thin_walls = 1
+top_fill_pattern = monotonic
+top_solid_infill_speed = 30
+travel_speed = 150
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 160
+wipe_tower_y = 160
+xy_size_compensation = 0
+extrusion_width = 0.45
+external_perimeter_extrusion_width = 0.43
+first_layer_extrusion_width = 0.55
+support_material_extrusion_width = 0.38
+top_infill_extrusion_width = 0.43
+