Initial Profile Sources

profile_sources/non-prusa-fff/BIQU/printer/BIQU BX.ini

@@ -0,0 +1,2 @@
+[printer:BIQU BX]
+inherits = *BIQU BX*; *0.4nozzle*

profile_sources/non-prusa-fff/BIQU/printer/_0.4nozzle_.ini

@@ -0,0 +1,7 @@
+[printer:*0.4nozzle*]
+nozzle_diameter = 0.4
+max_layer_height = 0.32
+min_layer_height = 0.04
+printer_variant = 0.4
+default_print_profile = 0.20mm NORMAL @BIQU
+

profile_sources/non-prusa-fff/BIQU/printer/_BIQU BX_.ini

@@ -0,0 +1,7 @@
+[printer:*BIQU BX*]
+inherits = *common*; *spriteextruder*
+bed_shape =  0x0,250x0,250x250,0x250
+max_print_height = 250
+printer_model = BIQUBX
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIQU\nPRINTER_MODEL_BIQUBX
+

profile_sources/non-prusa-fff/BIQU/printer/_SmallBowden_.ini

@@ -0,0 +1,25 @@
+[printer:*SmallBowden*]
+inherits = *common*
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 500
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 60
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+retract_before_travel = 2
+retract_length = 5
+retract_speed = 60
+deretract_speed = 40
+retract_before_wipe = 70%
+default_filament_profile = Generic PLA @BIQU
+

profile_sources/non-prusa-fff/BIQU/printer/_common_.ini

@@ -0,0 +1,68 @@
+[printer:*common*]
+printer_technology = FFF
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}\n\n
+between_objects_gcode = 
+pause_print_gcode = 
+deretract_speed = 40
+extruder_colour = #FCE94F
+extruder_offset = 0x0
+gcode_flavor = marlin2
+silent_mode = 0
+remaining_times = 0
+machine_max_acceleration_e = 10000
+machine_max_acceleration_extruding = 1000
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_x = 1000
+machine_max_acceleration_y = 1000
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 65
+machine_max_feedrate_x = 200
+machine_max_feedrate_y = 200
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 2
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z}
+max_layer_height = 0.28
+min_layer_height = 0.08
+max_print_height = 250
+nozzle_diameter = 0.4
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 2
+retract_before_wipe = 70%
+retract_layer_change = 1
+retract_length = 5
+retract_length_toolchange = 1
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 60
+single_extruder_multi_material = 0
+thumbnails = 16x16,220x124
+thumbnails_color = #018aff
+thumbnails_custom_color = 0
+thumbnails_end_file = 0
+thumbnails_format = PNG
+thumbnails_with_bed = 0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+z_step = 0.04
+printer_model = 
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
+default_print_profile = 0.16mm OPTIMAL @BIQU
+default_filament_profile = Generic PLA @BIQU
+start_gcode = M117 Initial homing sequence. ; Home so that the probe is positioned to heat\nG28\n\nM117 Probe heating position\nG0 X65 Y5 Z1 ; Move the probe to the heating position.\n\nM117 Getting the heaters up to temp!\nM104 S140 ; Set Extruder temperature, no wait\nM140 S[first_layer_bed_temperature] ; Set Heat Bed temperature\nM190 S[first_layer_bed_temperature] ; Wait for Heat Bed temperature\n\nM117 Waiting for probe to warm!\nG4 S90 ; Wait another 90s for the probe to absorb heat.\n\nM117 Post warming re-home\nG28 ; Home all axes again after warming\n\nM117 Z-Align\nG34\n\nM117 ABL Probing\nG29\n\nM900 K0 L0 T0 ; Edit the K and L values if you have calibrated a k factor for your filament\nM900 T0 S0\n\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y10 Z0.3 F5000.0 ; Move to start position\n\nM117 Getting the extruder up to temp\nM140 S[first_layer_bed_temperature] ; Set Heat Bed temperature\nM104 S{first_layer_temperature[initial_tool]} ; Set Extruder temperature\nM109 S{first_layer_temperature[initial_tool]} ; Wait for Extruder temperature\nM190 S[first_layer_bed_temperature] ; Wait for Heat Bed temperature\n\nG92 E0 ; Reset Extruder\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM117 Printing...\nG1 X8 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
+end_gcode = G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract a bit more and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z by 10mm\nG90 ;Return to absolute positioning\n\nG1 X0 Y{print_bed_max[1]*0.8} ;TaDaaaa\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n
+

profile_sources/non-prusa-fff/BIQU/printer/_dualextruder_.ini

@@ -0,0 +1,25 @@
+[printer:*dualextruder*]
+single_extruder_multi_material = 1
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+extra_loading_move = -2
+parking_pos_retraction = 92
+deretract_speed = 40,40
+extruder_colour = #FCE94F;#729FCF
+extruder_offset = 0x0,0x0
+max_layer_height = 0.28,0.28
+min_layer_height = 0.08,0.08
+nozzle_diameter = 0.4,0.4
+retract_before_travel = 2,2
+retract_before_wipe = 70%,70%
+retract_layer_change = 1,1
+retract_length = 5,5
+retract_length_toolchange = 1,1
+retract_lift = 0,0
+retract_lift_above = 0,0
+retract_lift_below = 0,0
+retract_restart_extra = 0,0
+retract_restart_extra_toolchange = 0,0
+retract_speed = 60,60
+wipe = 1,1
+

profile_sources/non-prusa-fff/BIQU/printer/_spriteextruder_.ini

@@ -0,0 +1,8 @@
+[printer:*spriteextruder*]
+retract_length = 0.6
+retract_speed = 40
+deretract_speed = 40
+retract_before_travel = 1
+retract_before_wipe = 0%
+
+# Intended for printers with dual extruders and a single hotend/nozzle, like the CR-X series