mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-10-01 10:37:17 +00:00
Initial Profile Sources
This commit is contained in:
Dark98
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou 220 MK3S+ 0.25mm nozzle]
|
||||
inherits = Caribou 220 MK3S+ 0.4mm nozzle
|
||||
nozzle_diameter = 0.25
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.10mm DETAIL 0.25mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou 220 MK3S+ 0.3mm nozzle]
|
||||
inherits = Caribou 220 MK3S+ 0.4mm nozzle
|
||||
nozzle_diameter = 0.3
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.3
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.15mm DETAIL 0.3mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,27 @@
|
||||
[printer:Caribou 220 MK3S+ 0.4mm nozzle]
|
||||
inherits = *common_CaribouMK3*
|
||||
machine_max_acceleration_e = 5000,5000
|
||||
machine_max_acceleration_extruding = 1250,1250
|
||||
machine_max_acceleration_retracting = 1250,1250
|
||||
machine_max_acceleration_x = 1000,960
|
||||
machine_max_acceleration_y = 1000,960
|
||||
machine_max_acceleration_z = 200,200
|
||||
machine_max_feedrate_e = 120,120
|
||||
machine_max_feedrate_x = 200,100
|
||||
machine_max_feedrate_y = 200,100
|
||||
machine_max_feedrate_z = 12,12
|
||||
machine_max_jerk_e = 4.5,4.5
|
||||
machine_max_jerk_x = 8,8
|
||||
machine_max_jerk_y = 8,8
|
||||
machine_max_jerk_z = 0.4,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
nozzle_diameter = 0.4
|
||||
silent_mode = 1
|
||||
remaining_times = 1
|
||||
retract_lift_below = 216
|
||||
max_print_height = 217
|
||||
printer_model = Caribou_MK3S_220
|
||||
printer_variant = 0.4
|
||||
default_print_profile = 0.20mm QUALITY @Caribou
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:Caribou 220 MK3S+ 0.5mm nozzle]
|
||||
inherits = Caribou 220 MK3S+ 0.4mm nozzle
|
||||
nozzle_diameter = 0.5
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.12
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.25mm QUALITY 0.5mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:Caribou 220 MK3S+ 0.6mm nozzle]
|
||||
inherits = Caribou 220 MK3S+ 0.4mm nozzle
|
||||
nozzle_diameter = 0.6
|
||||
max_layer_height = 0.48
|
||||
min_layer_height = 0.15
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.30mm QUALITY 0.6mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,13 @@
|
||||
[printer:Caribou 220 MK3S+ 0.8mm nozzle]
|
||||
inherits = Caribou 220 MK3S+ 0.4mm nozzle
|
||||
nozzle_diameter = 0.8
|
||||
max_layer_height = 0.64
|
||||
min_layer_height = 0.2
|
||||
printer_variant = 0.8
|
||||
retract_length = 1
|
||||
default_print_profile = 0.40mm QUALITY @0.8 nozzle Caribou
|
||||
default_filament_profile = Caribou PLA @0.8 nozzle Caribou
|
||||
|
||||
# =========================================================
|
||||
|
||||
|
||||
+9
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou 220 MK3S+ Klipper 0.25mm nozzle]
|
||||
inherits = Caribou 220 MK3S+ Klipper 0.4mm nozzle
|
||||
nozzle_diameter = 0.25
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.10mm DETAIL 0.25mm nozzle @Caribou
|
||||
|
||||
+9
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou 220 MK3S+ Klipper 0.3mm nozzle]
|
||||
inherits = Caribou 220 MK3S+ Klipper 0.4mm nozzle
|
||||
nozzle_diameter = 0.3
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.3
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.15mm DETAIL 0.3mm nozzle @Caribou
|
||||
|
||||
+25
@@ -0,0 +1,25 @@
|
||||
[printer:Caribou 220 MK3S+ Klipper 0.4mm nozzle]
|
||||
inherits = *common_CaribouMK3Klipper*
|
||||
machine_max_acceleration_e = 5000,5000
|
||||
machine_max_acceleration_extruding = 1250,1250
|
||||
machine_max_acceleration_retracting = 1250,1250
|
||||
machine_max_acceleration_x = 1000,960
|
||||
machine_max_acceleration_y = 1000,960
|
||||
machine_max_acceleration_z = 200,200
|
||||
machine_max_feedrate_e = 120,120
|
||||
machine_max_feedrate_x = 200,100
|
||||
machine_max_feedrate_y = 200,100
|
||||
machine_max_feedrate_z = 12,12
|
||||
machine_max_jerk_e = 4.5,4.5
|
||||
machine_max_jerk_x = 8,8
|
||||
machine_max_jerk_y = 8,8
|
||||
machine_max_jerk_z = 0.4,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
silent_mode = 1
|
||||
remaining_times = 1
|
||||
retract_lift_below = 216
|
||||
max_print_height = 217
|
||||
printer_model = Caribou_MK3S_220_Klipper
|
||||
default_print_profile = 0.20mm QUALITY @Caribou
|
||||
|
||||
+8
@@ -0,0 +1,8 @@
|
||||
[printer:Caribou 220 MK3S+ Klipper 0.5mm nozzle]
|
||||
inherits = Caribou 220 MK3S+ Klipper 0.4mm nozzle
|
||||
nozzle_diameter = 0.5
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.12
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.25mm QUALITY 0.5mm nozzle @Caribou
|
||||
|
||||
+8
@@ -0,0 +1,8 @@
|
||||
[printer:Caribou 220 MK3S+ Klipper 0.6mm nozzle]
|
||||
inherits = Caribou 220 MK3S+ Klipper 0.4mm nozzle
|
||||
nozzle_diameter = 0.6
|
||||
max_layer_height = 0.48
|
||||
min_layer_height = 0.15
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.30mm QUALITY 0.6mm nozzle @Caribou
|
||||
|
||||
+10
@@ -0,0 +1,10 @@
|
||||
[printer:Caribou 220 MK3S+ Klipper 0.8mm nozzle]
|
||||
inherits = Caribou 220 MK3S+ Klipper 0.4mm nozzle
|
||||
nozzle_diameter = 0.8
|
||||
max_layer_height = 0.64
|
||||
min_layer_height = 0.2
|
||||
printer_variant = 0.8
|
||||
retract_length = 1
|
||||
default_print_profile = 0.40mm QUALITY @0.8 nozzle Caribou
|
||||
default_filament_profile = Caribou PLA @0.8 nozzle Caribou
|
||||
|
||||
+10
@@ -0,0 +1,10 @@
|
||||
[printer:Caribou 320 MK3S+ Klipper 0.8mm nozzle]
|
||||
inherits = Caribou 320 MK3S+ Klipper 0.4mm nozzle
|
||||
nozzle_diameter = 0.8
|
||||
max_layer_height = 0.64
|
||||
min_layer_height = 0.2
|
||||
printer_variant = 0.8
|
||||
retract_length = 1
|
||||
default_print_profile = 0.40mm QUALITY @0.8 nozzle Caribou
|
||||
default_filament_profile = Caribou PLA @0.8 nozzle Caribou
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou 320 MK3S+ 0.25mm nozzle]
|
||||
inherits = Caribou 320 MK3S+ 0.4mm nozzle
|
||||
nozzle_diameter = 0.25
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.10mm DETAIL 0.25mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou 320 MK3S+ 0.3mm nozzle]
|
||||
inherits = Caribou 320 MK3S+ 0.4mm nozzle
|
||||
nozzle_diameter = 0.3
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.3
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.15mm DETAIL 0.3mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,26 @@
|
||||
[printer:Caribou 320 MK3S+ 0.4mm nozzle]
|
||||
inherits = *common_CaribouMK3*
|
||||
machine_max_acceleration_e = 5000,5000
|
||||
machine_max_acceleration_extruding = 1250,1250
|
||||
machine_max_acceleration_retracting = 1250,1250
|
||||
machine_max_acceleration_x = 1000,960
|
||||
machine_max_acceleration_y = 1000,960
|
||||
machine_max_acceleration_z = 200,200
|
||||
machine_max_feedrate_e = 120,120
|
||||
machine_max_feedrate_x = 200,100
|
||||
machine_max_feedrate_y = 200,100
|
||||
machine_max_feedrate_z = 12,12
|
||||
machine_max_jerk_e = 4.5,4.5
|
||||
machine_max_jerk_x = 8,8
|
||||
machine_max_jerk_y = 8,8
|
||||
machine_max_jerk_z = 0.4,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_print_height = 317
|
||||
retract_lift_below = 316
|
||||
nozzle_diameter = 0.4
|
||||
printer variant = 0.4
|
||||
printer_model = Caribou_MK3S_320
|
||||
default_print_profile = 0.20mm QUALITY @Caribou
|
||||
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:Caribou 320 MK3S+ 0.5mm nozzle]
|
||||
inherits = Caribou 320 MK3S+ 0.4mm nozzle
|
||||
nozzle_diameter = 0.5
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.12
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.25mm QUALITY 0.5mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:Caribou 320 MK3S+ 0.6mm nozzle]
|
||||
inherits = Caribou 320 MK3S+ 0.4mm nozzle
|
||||
nozzle_diameter = 0.6
|
||||
max_layer_height = 0.48
|
||||
min_layer_height = 0.15
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.30mm QUALITY 0.6mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,12 @@
|
||||
[printer:Caribou 320 MK3S+ 0.8mm nozzle]
|
||||
inherits = Caribou 320 MK3S+ 0.4mm nozzle
|
||||
nozzle_diameter = 0.8
|
||||
max_layer_height = 0.64
|
||||
min_layer_height = 0.2
|
||||
printer_variant = 0.8
|
||||
retract_length = 1
|
||||
default_print_profile = 0.40mm QUALITY @0.8 nozzle Carbon
|
||||
default_filament_profile = Caribou PLA @0.8 nozzle Caribou
|
||||
|
||||
# =========================================================
|
||||
|
||||
+9
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou 320 MK3S+ Klipper 0.25mm nozzle]
|
||||
inherits = Caribou 320 MK3S+ Klipper 0.4mm nozzle
|
||||
nozzle_diameter = 0.25
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.10mm DETAIL 0.25mm nozzle @Caribou
|
||||
|
||||
+9
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou 320 MK3S+ Klipper 0.3mm nozzle]
|
||||
inherits = Caribou 320 MK3S+ Klipper 0.4mm nozzle
|
||||
nozzle_diameter = 0.3
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.3
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.15mm DETAIL 0.3mm nozzle @Caribou
|
||||
|
||||
+25
@@ -0,0 +1,25 @@
|
||||
[printer:Caribou 320 MK3S+ Klipper 0.4mm nozzle]
|
||||
inherits = *common_CaribouMK3Klipper*
|
||||
machine_max_acceleration_e = 5000,5000
|
||||
machine_max_acceleration_extruding = 1250,1250
|
||||
machine_max_acceleration_retracting = 1250,1250
|
||||
machine_max_acceleration_x = 1000,960
|
||||
machine_max_acceleration_y = 1000,960
|
||||
machine_max_acceleration_z = 200,200
|
||||
machine_max_feedrate_e = 120,120
|
||||
machine_max_feedrate_x = 200,100
|
||||
machine_max_feedrate_y = 200,100
|
||||
machine_max_feedrate_z = 12,12
|
||||
machine_max_jerk_e = 4.5,4.5
|
||||
machine_max_jerk_x = 8,8
|
||||
machine_max_jerk_y = 8,8
|
||||
machine_max_jerk_z = 0.4,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
silent_mode = 1
|
||||
remaining_times = 1
|
||||
retract_lift_below = 316
|
||||
max_print_height = 317
|
||||
printer_model = Caribou_MK3S_320_Klipper
|
||||
default_print_profile = 0.20mm QUALITY @Caribou
|
||||
|
||||
+8
@@ -0,0 +1,8 @@
|
||||
[printer:Caribou 320 MK3S+ Klipper 0.5mm nozzle]
|
||||
inherits = Caribou 320 MK3S+ Klipper 0.4mm nozzle
|
||||
nozzle_diameter = 0.5
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.12
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.25mm QUALITY 0.5mm nozzle @Caribou
|
||||
|
||||
+8
@@ -0,0 +1,8 @@
|
||||
[printer:Caribou 320 MK3S+ Klipper 0.6mmnozzle]
|
||||
inherits = Caribou 320 MK3S+ Klipper 0.4mm nozzle
|
||||
nozzle_diameter = 0.6
|
||||
max_layer_height = 0.48
|
||||
min_layer_height = 0.15
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.30mm QUALITY 0.6mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou 420 MK3S+ 0.25mm nozzle]
|
||||
inherits = Caribou 420 MK3S+ 0.4mm nozzle
|
||||
nozzle_diameter = 0.25
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.10mm DETAIL 0.25mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou 420 MK3S+ 0.3mm nozzle]
|
||||
inherits = Caribou 420 MK3S+ 0.4mm nozzle
|
||||
nozzle_diameter = 0.3
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.3
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.15mm DETAIL 0.3mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou 420 MK3S+ 0.4mm nozzle]
|
||||
inherits = *common_CaribouMK3*
|
||||
max_print_height = 417
|
||||
retract_lift_below = 416
|
||||
nozzle_diameter = 0.4
|
||||
printer variant = 0.4
|
||||
printer_model = Caribou_MK3S_420
|
||||
default_print_profile = 0.20mm QUALITY @Caribou
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:Caribou 420 MK3S+ 0.5mm nozzle]
|
||||
inherits = Caribou 420 MK3S+ 0.4mm nozzle
|
||||
nozzle_diameter = 0.5
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.12
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.25mm QUALITY 0.5mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:Caribou 420 MK3S+ 0.6mm nozzle]
|
||||
inherits = Caribou 420 MK3S+ 0.4mm nozzle
|
||||
nozzle_diameter = 0.6
|
||||
max_layer_height = 0.48
|
||||
min_layer_height = 0.15
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.30mm QUALITY 0.6mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,12 @@
|
||||
[printer:Caribou 420 MK3S+ 0.8mm nozzle]
|
||||
inherits = Caribou 420 MK3S+ 0.4mm nozzle
|
||||
nozzle_diameter = 0.8
|
||||
max_layer_height = 0.64
|
||||
min_layer_height = 0.2
|
||||
printer_variant = 0.8
|
||||
retract_length = 1
|
||||
default_print_profile = 0.40mm QUALITY @0.8 nozzle Caribou
|
||||
default_filament_profile = Caribou PLA @0.8 nozzle Caribou
|
||||
|
||||
# MK3S+ Klipper printers
|
||||
|
||||
+9
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou 420 MK3S+ Klipper 0.25mm nozzle]
|
||||
inherits = Caribou 420 MK3S+ Klipper 0.4mm nozzle
|
||||
nozzle_diameter = 0.25
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.10mm DETAIL 0.25mm nozzle @Caribou
|
||||
|
||||
+9
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou 420 MK3S+ Klipper 0.3mm nozzle]
|
||||
inherits = Caribou 420 MK3S+ Klipper 0.4mm nozzle
|
||||
nozzle_diameter = 0.3
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.3
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.15mm DETAIL 0.3mm nozzle @Caribou
|
||||
|
||||
+27
@@ -0,0 +1,27 @@
|
||||
[printer:Caribou 420 MK3S+ Klipper 0.4mm nozzle]
|
||||
inherits = *common_CaribouMK3Klipper*
|
||||
machine_max_acceleration_e = 5000,5000
|
||||
machine_max_acceleration_extruding = 1250,1250
|
||||
machine_max_acceleration_retracting = 1250,1250
|
||||
machine_max_acceleration_x = 1000,960
|
||||
machine_max_acceleration_y = 1000,960
|
||||
machine_max_acceleration_z = 200,200
|
||||
machine_max_feedrate_e = 120,120
|
||||
machine_max_feedrate_x = 200,100
|
||||
machine_max_feedrate_y = 200,100
|
||||
machine_max_feedrate_z = 12,12
|
||||
machine_max_jerk_e = 4.5,4.5
|
||||
machine_max_jerk_x = 8,8
|
||||
machine_max_jerk_y = 8,8
|
||||
machine_max_jerk_z = 0.4,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
silent_mode = 1
|
||||
remaining_times = 1
|
||||
retract_lift_below = 416
|
||||
nozzle_diameter = 0.4
|
||||
printer variant = 0.4
|
||||
max_print_height = 417
|
||||
printer_model = Caribou_MK3S_420_Klipper
|
||||
default_print_profile = 0.20mm QUALITY @Caribou
|
||||
|
||||
+8
@@ -0,0 +1,8 @@
|
||||
[printer:Caribou 420 MK3S+ Klipper 0.5mm nozzle]
|
||||
inherits = Caribou 420 MK3S+ Klipper 0.4mm nozzle
|
||||
nozzle_diameter = 0.5
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.12
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.25mm QUALITY 0.5mm nozzle @Caribou
|
||||
|
||||
+8
@@ -0,0 +1,8 @@
|
||||
[printer:Caribou 420 MK3S+ Klipper 0.6mm nozzle]
|
||||
inherits = Caribou 420 MK3S+ Klipper 0.4mm nozzle
|
||||
nozzle_diameter = 0.6
|
||||
max_layer_height = 0.48
|
||||
min_layer_height = 0.15
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.30mm QUALITY 0.6mm nozzle @Caribou
|
||||
|
||||
+13
@@ -0,0 +1,13 @@
|
||||
[printer:Caribou 420 MK3S+ Klipper 0.8mm nozzle]
|
||||
inherits = Caribou 420 MK3S+ Klipper 0.4mm nozzle
|
||||
nozzle_diameter = 0.8
|
||||
max_layer_height = 0.64
|
||||
min_layer_height = 0.2
|
||||
printer_variant = 0.8
|
||||
retract_length = 1
|
||||
default_print_profile = 0.40mm QUALITY @0.8 nozzle Caribou
|
||||
default_filament_profile = Caribou PLA @0.8 nozzle Caribou
|
||||
|
||||
|
||||
# Duet Printers
|
||||
|
||||
@@ -0,0 +1,11 @@
|
||||
[printer:Caribou IDEX Duplicate 0.25 nozzle]
|
||||
inherits = *common_CaribouIDEX_printer*
|
||||
printer_model = Caribou_IDEX_Duplicate
|
||||
bed_shape = 0x0,125x0,125x210,0x210
|
||||
printer_variant = 0.25
|
||||
nozzle_diameter = 0.25
|
||||
default_print_profile = 0.10mm QUALITY 0.25mm nozzle @Caribou
|
||||
start_gcode = T-1 P0 ; deselect tools\nG1 X60 Y-5 Z80 ; move extruder 0 above bed;\n;\nM568 P0 S{first_layer_temperature[0]} R{first_layer_temperature[1]+ 1.5 * standby_temperature_delta} A1\nM568 P1 S{first_layer_temperature[1]} R{first_layer_temperature[1]+ standby_temperature_delta} A1\n;\nM140 S[first_layer_bed_temperature] ; set bed temerature\nM190 S[first_layer_bed_temperature] ; wait for bed temperature\n;\nG29 ; mesh bed leveling using defined mesh grid\nG90 ; absolute positioning\n;\nG1 X0 Y-5 Z0.6 ; move extruder near bed\n;\nM568 P0 S{first_layer_temperature[0]} R{first_layer_temperature[1]+ standby_temperature_delta} A1\n;\nT0 P0 ; select tool 0\nM116 P0 ; wait for tool 0 temperature\nM98 P"0:/sys/primeLine-X.g" ; execute primeline macro for x\nG1 X-125 Z5 ; move tool 0 to parking position\n;\nT1 P1 ; select tool 1\nM116 P1 ; wait for tool 1 temperature\nG1 X252 Y-5 Z0.6 ; move extruder near bed\nM98 P"0:/sys/primeLine-U.g" ; execute primeline macro macro for u\n;\n{if initial_extruder != 1} \n G1 U365 Z5 ; move tool 1 to parking position\n{endif}\n;\nT2\n
|
||||
|
||||
#---------------------------------------------------------------------------------------------------------------------------
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou IDEX Duplicate 0.35 nozzle]
|
||||
inherits = *common_CaribouIDEX_printer*
|
||||
printer_model = Caribou_IDEX_Duplicate
|
||||
bed_shape = 0x0,125x0,125x210,0x210
|
||||
printer_variant = 0.35
|
||||
nozzle_diameter = 0.35
|
||||
default_print_profile = 0.10mm QUALITY 0.25mm nozzle @Caribou
|
||||
start_gcode = T-1 P0 ; deselect tools\nG1 X60 Y-5 Z80 ; move extruder 0 above bed;\n;\nM568 P0 S{first_layer_temperature[0]} R{first_layer_temperature[1]+ 1.5 * standby_temperature_delta} A1\nM568 P1 S{first_layer_temperature[1]} R{first_layer_temperature[1]+ standby_temperature_delta} A1\n;\nM140 S[first_layer_bed_temperature] ; set bed temerature\nM190 S[first_layer_bed_temperature] ; wait for bed temperature\n;\nG29 ; mesh bed leveling using defined mesh grid\nG90 ; absolute positioning\n;\nG1 X0 Y-5 Z0.6 ; move extruder near bed\n;\nM568 P0 S{first_layer_temperature[0]} R{first_layer_temperature[1]+ standby_temperature_delta} A1\n;\nT0 P0 ; select tool 0\nM116 P0 ; wait for tool 0 temperature\nM98 P"0:/sys/primeLine-X.g" ; execute primeline macro for x\nG1 X-125 Z5 ; move tool 0 to parking position\n;\nT1 P1 ; select tool 1\nM116 P1 ; wait for tool 1 temperature\nG1 X252 Y-5 Z0.6 ; move extruder near bed\nM98 P"0:/sys/primeLine-U.g" ; execute primeline macro macro for u\n;\n{if initial_extruder != 1} \n G1 U365 Z5 ; move tool 1 to parking position\n{endif}\n;\nT2\n
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou IDEX Duplicate 0.4 nozzle]
|
||||
inherits = *common_CaribouIDEX_printer*
|
||||
printer_model = Caribou_IDEX_Duplicate
|
||||
bed_shape = 0x0,125x0,125x210,0x210
|
||||
printer_variant = 0.4
|
||||
nozzle_diameter = 0.4
|
||||
default_print_profile = 0.20mm QUALITY 0.4mm nozzle @Caribou
|
||||
start_gcode = T-1 P0 ; deselect tools\nG1 X60 Y-5 Z80 ; move extruder 0 above bed;\n;\nM568 P0 S{first_layer_temperature[0]} R{first_layer_temperature[1]+ 1.5 * standby_temperature_delta} A1\nM568 P1 S{first_layer_temperature[1]} R{first_layer_temperature[1]+ standby_temperature_delta} A1\n;\nM140 S[first_layer_bed_temperature] ; set bed temerature\nM190 S[first_layer_bed_temperature] ; wait for bed temperature\n;\nG29 ; mesh bed leveling using defined mesh grid\nG90 ; absolute positioning\n;\nG1 X0 Y-5 Z0.6 ; move extruder near bed\n;\nM568 P0 S{first_layer_temperature[0]} R{first_layer_temperature[1]+ standby_temperature_delta} A1\n;\nT0 P0 ; select tool 0\nM116 P0 ; wait for tool 0 temperature\nM98 P"0:/sys/primeLine-X.g" ; execute primeline macro for x\nG1 X-125 Z5 ; move tool 0 to parking position\n;\nT1 P1 ; select tool 1\nM116 P1 ; wait for tool 1 temperature\nG1 X252 Y-5 Z0.6 ; move extruder near bed\nM98 P"0:/sys/primeLine-U.g" ; execute primeline macro macro for u\n;\n{if initial_extruder != 1} \n G1 U365 Z5 ; move tool 1 to parking position\n{endif}\n;\nT2\n
|
||||
|
||||
@@ -0,0 +1,11 @@
|
||||
[printer:Caribou IDEX Mirror 0.25 nozzle]
|
||||
inherits = *common_CaribouIDEX_printer*
|
||||
printer_model = Caribou_IDEX_Mirror
|
||||
bed_shape = 0x0,90x0,90x210,0x210
|
||||
printer_variant = 0.25
|
||||
nozzle_diameter = 0.25
|
||||
default_print_profile = 0.10mm QUALITY 0.25mm nozzle @Caribou
|
||||
start_gcode = T-1 P0 ; deselect tools\nG1 X60 Y-5 Z80 ; move extruder 0 above bed;\n;\nM568 P0 S{first_layer_temperature[0]} R{first_layer_temperature[1]+ 1.5 * standby_temperature_delta} A1\nM568 P1 S{first_layer_temperature[1]} R{first_layer_temperature[1]+ standby_temperature_delta} A1\n;\nM140 S[first_layer_bed_temperature] ; set bed temerature\nM190 S[first_layer_bed_temperature] ; wait for bed temperature\n;\nG29 ; mesh bed leveling using defined mesh grid\nG90 ; absolute positioning\n;\nG1 X0 Y-5 Z0.6 ; move extruder near bed\n;\nM568 P0 S{first_layer_temperature[0]} R{first_layer_temperature[1]+ standby_temperature_delta} A1\n;\nT0 P0 ; select tool 0\nM116 P0 ; wait for tool 0 temperature\nM98 P"0:/sys/primeLine-X.g" ; execute primeline macro for x\nG1 X-125 Z5 ; move tool 0 to parking position\n;\nT1 P1 ; select tool 1\nM116 P1 ; wait for tool 1 temperature\nG1 X252 Y-5 Z0.6 ; move extruder near bed\nM98 P"0:/sys/primeLine-U.g" ; execute primeline macro macro for u\n;\n{if initial_extruder != 1} \n G1 U365 Z5 ; move tool 1 to parking position\n{endif}\n;\nT3\n
|
||||
|
||||
#---------------------------------------------------------------------------------------------------------------------------
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou IDEX Mirror 0.35 nozzle]
|
||||
inherits = *common_CaribouIDEX_printer*
|
||||
printer_model = Caribou_IDEX_Mirror
|
||||
bed_shape = 0x0,90x0,90x210,0x210
|
||||
printer_variant = 0.35
|
||||
nozzle_diameter = 0.35
|
||||
default_print_profile = 0.10mm QUALITY 0.25mm nozzle @Caribou
|
||||
start_gcode = T-1 P0 ; deselect tools\nG1 X60 Y-5 Z80 ; move extruder 0 above bed;\n;\nM568 P0 S{first_layer_temperature[0]} R{first_layer_temperature[1]+ 1.5 * standby_temperature_delta} A1\nM568 P1 S{first_layer_temperature[1]} R{first_layer_temperature[1]+ standby_temperature_delta} A1\n;\nM140 S[first_layer_bed_temperature] ; set bed temerature\nM190 S[first_layer_bed_temperature] ; wait for bed temperature\n;\nG29 ; mesh bed leveling using defined mesh grid\nG90 ; absolute positioning\n;\nG1 X0 Y-5 Z0.6 ; move extruder near bed\n;\nM568 P0 S{first_layer_temperature[0]} R{first_layer_temperature[1]+ standby_temperature_delta} A1\n;\nT0 P0 ; select tool 0\nM116 P0 ; wait for tool 0 temperature\nM98 P"0:/sys/primeLine-X.g" ; execute primeline macro for x\nG1 X-125 Z5 ; move tool 0 to parking position\n;\nT1 P1 ; select tool 1\nM116 P1 ; wait for tool 1 temperature\nG1 X252 Y-5 Z0.6 ; move extruder near bed\nM98 P"0:/sys/primeLine-U.g" ; execute primeline macro macro for u\n;\n{if initial_extruder != 1} \n G1 U365 Z5 ; move tool 1 to parking position\n{endif}\n;\nT3\n
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou IDEX Mirror 0.4 nozzle]
|
||||
inherits = *common_CaribouIDEX_printer*
|
||||
printer_model = Caribou_IDEX_Mirror
|
||||
bed_shape = 0x0,90x0,90x210,0x210
|
||||
printer_variant = 0.4
|
||||
nozzle_diameter = 0.4
|
||||
default_print_profile = 0.20mm QUALITY 0.4mm nozzle @Caribou
|
||||
start_gcode = T-1 P0 ; deselect tools\nG1 X60 Y-5 Z80 ; move extruder 0 above bed;\n;\nM568 P0 S{first_layer_temperature[0]} R{first_layer_temperature[1]+ 1.5 * standby_temperature_delta} A1\nM568 P1 S{first_layer_temperature[1]} R{first_layer_temperature[1]+ standby_temperature_delta} A1\n;\nM140 S[first_layer_bed_temperature] ; set bed temerature\nM190 S[first_layer_bed_temperature] ; wait for bed temperature\n;\nG29 ; mesh bed leveling using defined mesh grid\nG90 ; absolute positioning\n;\nG1 X0 Y-5 Z0.6 ; move extruder near bed\n;\nM568 P0 S{first_layer_temperature[0]} R{first_layer_temperature[1]+ standby_temperature_delta} A1\n;\nT0 P0 ; select tool 0\nM116 P0 ; wait for tool 0 temperature\nM98 P"0:/sys/primeLine-X.g" ; execute primeline macro for x\nG1 X-125 Z5 ; move tool 0 to parking position\n;\nT1 P1 ; select tool 1\nM116 P1 ; wait for tool 1 temperature\nG1 X252 Y-5 Z0.6 ; move extruder near bed\nM98 P"0:/sys/primeLine-U.g" ; execute primeline macro macro for u\n;\n{if initial_extruder != 1} \n G1 U365 Z5 ; move tool 1 to parking position\n{endif}\n;\nT3\n
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:Caribou IDEX Standard 0.25 nozzle]
|
||||
inherits = *common_CaribouIDEX_printer*
|
||||
printer_model = Caribou_IDEX_Standard
|
||||
printer_variant = 0.25
|
||||
nozzle_diameter = 0.25,0.25
|
||||
default_print_profile = 0.10mm QUALITY 0.25mm nozzle @Caribou
|
||||
|
||||
#---------------------------------------------------------------------------------------------------------------------------
|
||||
|
||||
@@ -0,0 +1,7 @@
|
||||
[printer:Caribou IDEX Standard 0.35 nozzle]
|
||||
inherits = *common_CaribouIDEX_printer*
|
||||
printer_model = Caribou_IDEX_Standard
|
||||
printer_variant = 0.35
|
||||
nozzle_diameter = 0.35,0.35
|
||||
default_print_profile = 0.20mm QUALITY 0.35mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,7 @@
|
||||
[printer:Caribou IDEX Standard 0.4 nozzle]
|
||||
inherits = *common_CaribouIDEX_printer*
|
||||
printer_model = Caribou_IDEX_Standard
|
||||
printer_variant = 0.4
|
||||
nozzle_diameter = 0.4,0.4
|
||||
default_print_profile = 0.20mm QUALITY 0.4mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,7 @@
|
||||
[printer:Caribou IDEX Standard 0.6 nozzle]
|
||||
inherits = *common_CaribouIDEX_printer*
|
||||
printer_model = Caribou_IDEX_Standard
|
||||
printer_variant = 0.6
|
||||
nozzle_diameter = 0.6,0.6
|
||||
default_print_profile = 0.20mm QUALITY 0.6mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:CaribouDuet 220 0.25mm nozzle]
|
||||
inherits = CaribouDuet 220 0.4mm nozzle
|
||||
nozzle_diameter = 0.25
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.10mm DETAIL 0.25mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:CaribouDuet 220 0.3mm nozzle]
|
||||
inherits = CaribouDuet 220 0.4mm nozzle
|
||||
nozzle_diameter = 0.3
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.3
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.15mm DETAIL 0.3mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,25 @@
|
||||
[printer:CaribouDuet 220 0.4mm nozzle]
|
||||
inherits = *common_CaribouDuet*
|
||||
machine_max_acceleration_e = 5000,5000
|
||||
machine_max_acceleration_extruding = 1250,1250
|
||||
machine_max_acceleration_retracting = 1250,1250
|
||||
machine_max_acceleration_x = 1000,960
|
||||
machine_max_acceleration_y = 1000,960
|
||||
machine_max_acceleration_z = 200,200
|
||||
machine_max_feedrate_e = 120,120
|
||||
machine_max_feedrate_x = 200,100
|
||||
machine_max_feedrate_y = 200,100
|
||||
machine_max_feedrate_z = 12,12
|
||||
machine_max_jerk_e = 4.5,4.5
|
||||
machine_max_jerk_x = 8,8
|
||||
machine_max_jerk_y = 8,8
|
||||
machine_max_jerk_z = 0.4,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
silent_mode = 1
|
||||
remaining_times = 1
|
||||
retract_lift_below = 216
|
||||
max_print_height = 217
|
||||
printer_model = Caribou_Duet_220
|
||||
default_print_profile = 0.20mm QUALITY @Caribou
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:CaribouDuet 220 0.5mm nozzle]
|
||||
inherits = CaribouDuet 220 0.4mm nozzle
|
||||
nozzle_diameter = 0.5
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.12
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.25mm QUALITY 0.5mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:CaribouDuet 220 0.6mm nozzle]
|
||||
inherits = CaribouDuet 220 0.4mm nozzle
|
||||
nozzle_diameter = 0.6
|
||||
max_layer_height = 0.48
|
||||
min_layer_height = 0.15
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.30mm QUALITY 0.6mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
[printer:CaribouDuet 220 0.8mm nozzle]
|
||||
inherits = CaribouDuet 220 0.4mm nozzle
|
||||
nozzle_diameter = 0.8
|
||||
max_layer_height = 0.64
|
||||
min_layer_height = 0.2
|
||||
printer_variant = 0.8
|
||||
retract_length = 1
|
||||
default_print_profile = 0.40mm QUALITY @0.8 nozzle Caribou
|
||||
default_filament_profile = Caribou PLA @0.8 nozzle Caribou
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:CaribouDuet 320 0.25mm nozzle]
|
||||
inherits = CaribouDuet 320 0.4mm nozzle
|
||||
nozzle_diameter = 0.25
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.10mm DETAIL 0.25mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:CaribouDuet 320 0.3mm nozzle]
|
||||
inherits = CaribouDuet 320 0.4mm nozzle
|
||||
nozzle_diameter = 0.3
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.3
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.15mm DETAIL 0.3mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,25 @@
|
||||
[printer:CaribouDuet 320 0.4mm nozzle]
|
||||
inherits = *common_CaribouDuet*
|
||||
machine_max_acceleration_e = 5000,5000
|
||||
machine_max_acceleration_extruding = 1250,1250
|
||||
machine_max_acceleration_retracting = 1250,1250
|
||||
machine_max_acceleration_x = 1000,960
|
||||
machine_max_acceleration_y = 1000,960
|
||||
machine_max_acceleration_z = 200,200
|
||||
machine_max_feedrate_e = 120,120
|
||||
machine_max_feedrate_x = 200,100
|
||||
machine_max_feedrate_y = 200,100
|
||||
machine_max_feedrate_z = 12,12
|
||||
machine_max_jerk_e = 4.5,4.5
|
||||
machine_max_jerk_x = 8,8
|
||||
machine_max_jerk_y = 8,8
|
||||
machine_max_jerk_z = 0.4,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
silent_mode = 1
|
||||
remaining_times = 1
|
||||
retract_lift_below = 316
|
||||
max_print_height = 317
|
||||
printer_model = Caribou_Duet_320
|
||||
default_print_profile = 0.20mm QUALITY @Caribou
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:CaribouDuet 320 0.5mm nozzle]
|
||||
inherits = CaribouDuet 320 0.4mm nozzle
|
||||
nozzle_diameter = 0.5
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.12
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.25mm QUALITY 0.5mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:CaribouDuet 320 0.6mm nozzle]
|
||||
inherits = CaribouDuet 320 0.4mm nozzle
|
||||
nozzle_diameter = 0.6
|
||||
max_layer_height = 0.48
|
||||
min_layer_height = 0.15
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.30mm QUALITY 0.6mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
[printer:CaribouDuet 320 0.8mm nozzle]
|
||||
inherits = CaribouDuet 320 0.4mm nozzle
|
||||
nozzle_diameter = 0.8
|
||||
max_layer_height = 0.64
|
||||
min_layer_height = 0.2
|
||||
printer_variant = 0.8
|
||||
retract_length = 1
|
||||
default_print_profile = 0.40mm QUALITY @0.8 nozzle Caribou
|
||||
default_filament_profile = Caribou PLA @0.8 nozzle Caribou
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:CaribouDuet 420 0.25mm nozzle]
|
||||
inherits = CaribouDuet 420 0.4mm nozzle
|
||||
nozzle_diameter = 0.25
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.10mm DETAIL 0.25mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:CaribouDuet 420 0.3mm nozzle]
|
||||
inherits = CaribouDuet 420 0.4mm nozzle
|
||||
nozzle_diameter = 0.3
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.3
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.15mm DETAIL 0.3mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,25 @@
|
||||
[printer:CaribouDuet 420 0.4mm nozzle]
|
||||
inherits = *common_CaribouDuet*
|
||||
machine_max_acceleration_e = 5000,5000
|
||||
machine_max_acceleration_extruding = 1250,1250
|
||||
machine_max_acceleration_retracting = 1250,1250
|
||||
machine_max_acceleration_x = 1000,960
|
||||
machine_max_acceleration_y = 1000,960
|
||||
machine_max_acceleration_z = 200,200
|
||||
machine_max_feedrate_e = 120,120
|
||||
machine_max_feedrate_x = 200,100
|
||||
machine_max_feedrate_y = 200,100
|
||||
machine_max_feedrate_z = 12,12
|
||||
machine_max_jerk_e = 4.5,4.5
|
||||
machine_max_jerk_x = 8,8
|
||||
machine_max_jerk_y = 8,8
|
||||
machine_max_jerk_z = 0.4,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
silent_mode = 1
|
||||
remaining_times = 1
|
||||
retract_lift_below = 416
|
||||
max_print_height = 417
|
||||
printer_model = Caribou_Duet_420
|
||||
default_print_profile = 0.20mm QUALITY @Caribou
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:CaribouDuet 420 0.5mm nozzle]
|
||||
inherits = CaribouDuet 420 0.4mm nozzle
|
||||
nozzle_diameter = 0.5
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.12
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.25mm QUALITY 0.5mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:CaribouDuet 420 0.6mm nozzle]
|
||||
inherits = CaribouDuet 420 0.4mm nozzle
|
||||
nozzle_diameter = 0.6
|
||||
max_layer_height = 0.48
|
||||
min_layer_height = 0.15
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.30mm QUALITY 0.6mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,12 @@
|
||||
[printer:CaribouDuet 420 0.8mm nozzle]
|
||||
inherits = CaribouDuet 420 0.4mm nozzle
|
||||
nozzle_diameter = 0.8
|
||||
max_layer_height = 0.64
|
||||
min_layer_height = 0.2
|
||||
printer_variant = 0.8
|
||||
retract_length = 1
|
||||
default_print_profile = 0.40mm QUALITY @0.8 nozzle Caribou
|
||||
default_filament_profile = Caribou PLA @0.8 nozzle Caribou
|
||||
|
||||
#---------------------------------------------------------------------------------------------------------------------------
|
||||
|
||||
@@ -0,0 +1,7 @@
|
||||
[printer:CaribouM 0.25 nozzle]
|
||||
inherits = *common_CaribouM_printer*
|
||||
printer_model = Caribou_M
|
||||
printer_variant = 0.25
|
||||
nozzle_diameter = 0.25
|
||||
default_print_profile = 0.10mm M QUALITY 0.25mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,6 @@
|
||||
[printer:CaribouM 0.3 nozzle]
|
||||
inherits = *common_CaribouM_printer*
|
||||
printer_model = Caribou_M
|
||||
printer_variant = 0.3
|
||||
nozzle_diameter = 0.3
|
||||
default_print_profile = 0.10mm M QUALITY 0.3mm nozzle @Caribou
|
||||
@@ -0,0 +1,7 @@
|
||||
[printer:CaribouM 0.4 nozzle]
|
||||
inherits = *common_CaribouM_printer*
|
||||
printer_model = Caribou_M
|
||||
printer_variant = 0.4
|
||||
nozzle_diameter = 0.4
|
||||
default_print_profile = 0.20mm M QUALITY 0.4mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,7 @@
|
||||
[printer:CaribouM 0.6 nozzle]
|
||||
inherits = *common_CaribouM_printer*
|
||||
printer_model = Caribou_M
|
||||
printer_variant = 0.6
|
||||
nozzle_diameter = 0.6
|
||||
default_print_profile = 0.30mm M QUALITY 0.6mm nozzle @Caribou
|
||||
|
||||
@@ -0,0 +1,73 @@
|
||||
[printer:*common_CaribouDuet*]
|
||||
printer_technology = FFF
|
||||
bed_shape = 0x0,250x0,250x210,0x210
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
|
||||
between_objects_gcode =
|
||||
deretract_speed = 0
|
||||
end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
||||
extruder_offset = 0x0
|
||||
extruder_colour = #02F010
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 45
|
||||
gcode_flavor = reprapfirmware
|
||||
silent_mode = 0
|
||||
remaining_times = 1
|
||||
machine_max_acceleration_e = 10000
|
||||
machine_max_acceleration_extruding = 2000
|
||||
machine_max_acceleration_retracting = 1500
|
||||
machine_max_acceleration_x = 9000
|
||||
machine_max_acceleration_y = 9000
|
||||
machine_max_acceleration_z = 500
|
||||
machine_max_feedrate_e = 120
|
||||
machine_max_feedrate_x = 500
|
||||
machine_max_feedrate_y = 500
|
||||
machine_max_feedrate_z = 12
|
||||
machine_max_jerk_e = 2.5
|
||||
machine_max_jerk_x = 10
|
||||
machine_max_jerk_y = 10
|
||||
machine_max_jerk_z = 0.2
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
max_layer_height = 0.3
|
||||
min_layer_height = 0.05
|
||||
max_print_height = 200
|
||||
nozzle_diameter = 0.4
|
||||
octoprint_apikey =
|
||||
octoprint_host =
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CARIBOU3D\nPRINTER_MODEL_DUET\n
|
||||
printer_settings_id =
|
||||
retract_before_travel = 1
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 1
|
||||
retract_length = 0.4
|
||||
retract_length_toolchange = 4
|
||||
retract_lift = 0.4
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 199
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 25
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G28 W ; home all without mesh bed level\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nG0 X60 Y-3 Z80 ; move extruder above bed, keep extruder in front for cleaning and checking\nM104 S160 T0; pre-heat extruder to 160C\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG29 ; mesh bed leveling using defined mesh grid\nG0 X0 Y-3 Z0.6 ; go outside print area\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM98 P"0:/sys/primeLine.g"; execute primeline macro\nG92 E0.0M572 D0 S0.07 ; set pressure advance
|
||||
thumbnails = 160x160/QOI, 450x450/QOI
|
||||
thumbnails_color = #02F010
|
||||
thumbnails_custom_color = 1
|
||||
thumbnails_end_file = 0
|
||||
thumbnails_format = QOI
|
||||
thumbnails_with_bed = 1
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
z_step = 0.0025
|
||||
printer_variant = 0.4
|
||||
default_print_profile = 0.15mm OPTIMAL @Caribou
|
||||
default_filament_profile = Caribou PLA @Caribou
|
||||
|
||||
|
||||
@@ -0,0 +1,91 @@
|
||||
[printer:*common_CaribouIDEX_printer*]
|
||||
autoemit_temperature_commands = 0
|
||||
bed_custom_model =
|
||||
bed_custom_texture =
|
||||
bed_shape = 0x0,250x0,250x210,0x210
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
|
||||
between_objects_gcode =
|
||||
binary_gcode = 0
|
||||
color_change_gcode = M600
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = "Caribou PLA @Caribou"
|
||||
default_print_profile = 0.20mm QUALITY @Caribou
|
||||
deretract_speed = 0,0
|
||||
end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n
|
||||
extra_loading_move = -2
|
||||
extruder_colour = #02F010;#02F010
|
||||
extruder_offset = 0x0,0x0
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 45
|
||||
gcode_flavor = reprapfirmware
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = duet
|
||||
inherits =
|
||||
layer_gcode = {if layer_num == 1}\n M221 D0 S100\n M221 D1 S100\n {if is_extruder_used[0]}\n M568 P0 S{temperature[0]} R{temperature[0]+ standby_temperature_delta}\n {endif}\n {if is_extruder_used[1]}\n M568 P1 S{temperature[1]} R{temperature[1]+ standby_temperature_delta}\n {endif}\n{endif}
|
||||
machine_limits_usage = time_estimate_only
|
||||
machine_max_acceleration_e = 5000,5000
|
||||
machine_max_acceleration_extruding = 1250,1250
|
||||
machine_max_acceleration_retracting = 1250,1250
|
||||
machine_max_acceleration_travel = 1500,1250
|
||||
machine_max_acceleration_x = 1000,960
|
||||
machine_max_acceleration_y = 1000,960
|
||||
machine_max_acceleration_z = 200,200
|
||||
machine_max_feedrate_e = 120,120
|
||||
machine_max_feedrate_x = 200,100
|
||||
machine_max_feedrate_y = 200,100
|
||||
machine_max_feedrate_z = 12,12
|
||||
machine_max_jerk_e = 4.5,4.5
|
||||
machine_max_jerk_x = 8,8
|
||||
machine_max_jerk_y = 8,8
|
||||
machine_max_jerk_z = 0.4,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0.3,0.3
|
||||
max_print_height = 217
|
||||
min_layer_height = 0.05,0.05
|
||||
multimaterial_purging = 140
|
||||
nozzle_diameter = 0.4,0.4
|
||||
parking_pos_retraction = 92
|
||||
pause_print_gcode = M601
|
||||
print_host =
|
||||
printer_model = Caribou_IDEX_Standard
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CARIBOU3D\nPRINTER_MODEL_DUET\n
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant = 0.4
|
||||
printer_vendor =
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 1
|
||||
retract_before_travel = 1,1
|
||||
retract_before_wipe = 0%,0%
|
||||
retract_layer_change = 1,1
|
||||
retract_length = 0.4,0.4
|
||||
retract_length_toolchange = 4,4
|
||||
retract_lift = 0.4,0.4
|
||||
retract_lift_above = 0,0
|
||||
retract_lift_below = 216,216
|
||||
retract_restart_extra = 0,0
|
||||
retract_restart_extra_toolchange = 0,0
|
||||
retract_speed = 25,25
|
||||
silent_mode = 1
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = T-1 P0 ; deselect tools\nG0 X60 Y-5 Z80 ; move extruder 0 above bed\n;\nM568 P0 S{first_layer_temperature[0]} R{160} A1\n;\n{if is_extruder_used[1]}\n M568 P1 S{first_layer_temperature[1]} R{160} A1\n{else}\n M568 P1 S0 R0 A0 ; if extruder 1 is not used we can turn heating off\n{endif}\n;\nM140 S[first_layer_bed_temperature] ; set bed temerature\nM190 S[first_layer_bed_temperature] ; wait for bed temperature\nM116 P0 ; wait for tool 0 temperature\n;\nG29 ; mesh bed leveling using defined mesh grid\nG90 ; absolute positioning\n;\n{if is_extruder_used[1]}\n G0 X-125 Y-5 ; park tool 0\n{else}\n G0 X0 Y-5 Z0.6 ; move extruder near bed\n{endif}\n;\n{if is_extruder_used[0]}\n M568 P0 S{first_layer_temperature[0]} R{first_layer_temperature[0]+ standby_temperature_delta} A2\n M116 P0 ; wait for tool 0 temperature\n T0 P0 ; select tool 0\n M116 P0 ; wait for temperature of extruder 0\n M98 P"0:/sys/primeLine-X.g" ; execute primeline macro for x\n {if is_extruder_used[1]} ; move to parking position when tool 1 is used as well\n G1 X-125 Z5 ; move tool 0 to parking position\n {endif}\n{else}\n M568 P0 S0 R0 A0 ; if extruder 0 is not used we can turn heating off\n{endif}\n;\n{if is_extruder_used[1]}\n M568 P1 S{first_layer_temperature[1]} R{first_layer_temperature[1]+ standby_temperature_delta} A2\n M116 P1 ; wait for tool 1 temperature\n T1 P1 ; select tool 1\n G0 X252 Y-5 Z0.6 ; move extruder near bed\n M116 P1 ; wait for temperature of extruder 1\n M98 P"0:/sys/primeLine-U.g" ; execute primeline macro macro for u\n {if initial_extruder != 1}\n G1 U365 Z5 ; move tool 1 to parking position\n {endif}\n{endif}\n;\nT[initial_extruder]\n\n
|
||||
template_custom_gcode =
|
||||
thumbnails = 160x160/QOI, 450x450/QOI
|
||||
thumbnails_format = QOI
|
||||
toolchange_gcode =
|
||||
travel_lift_before_obstacle = 0,0
|
||||
travel_max_lift = 0,0
|
||||
travel_ramping_lift = 0,0
|
||||
travel_slope = 0,0
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1,1
|
||||
z_offset = 0
|
||||
|
||||
#---------------------------------------------------------------------------------------------------------------------------
|
||||
|
||||
@@ -0,0 +1,70 @@
|
||||
[printer:*common_CaribouMK3Klipper*]
|
||||
printer_technology = FFF
|
||||
bed_shape = 0x0,250x0,250x210,0x210
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
|
||||
between_objects_gcode =
|
||||
deretract_speed = 0
|
||||
end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
||||
extruder_offset = 0x0
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 45
|
||||
gcode_flavor = klipper
|
||||
silent_mode = 0
|
||||
remaining_times = 1
|
||||
machine_limits_usage = time_estimate_only
|
||||
machine_max_acceleration_e = 10000
|
||||
machine_max_acceleration_extruding = 2000
|
||||
machine_max_acceleration_retracting = 1500
|
||||
machine_max_acceleration_x = 9000
|
||||
machine_max_acceleration_y = 9000
|
||||
machine_max_acceleration_z = 500
|
||||
machine_max_feedrate_e = 120
|
||||
machine_max_feedrate_x = 500
|
||||
machine_max_feedrate_y = 500
|
||||
machine_max_feedrate_z = 12
|
||||
machine_max_jerk_e = 2.5
|
||||
machine_max_jerk_x = 10
|
||||
machine_max_jerk_y = 10
|
||||
machine_max_jerk_z = 0.2
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
max_layer_height = 0.3
|
||||
min_layer_height = 0.05
|
||||
max_print_height = 200
|
||||
nozzle_diameter = 0.4
|
||||
octoprint_apikey =
|
||||
octoprint_host =
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CARIBOU3D\nPRINTER_MODEL_MK3KLIPPER\n
|
||||
printer_settings_id =
|
||||
retract_before_travel = 1
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 1
|
||||
retract_length = 0.4
|
||||
retract_length_toolchange = 4
|
||||
retract_lift = 0.4
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 199
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 25
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = G28 W ; home all without mesh bed level\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nG0 X60 Y-3 Z80 ; move extruder above bed, keep extruder in front for cleaning and checking\nM104 S160 T0; pre-heat extruder to 160C\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nM104 S{first_layer_temperature[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]} ; wait for extruder temp\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
thumbnails_color = #02F010
|
||||
thumbnails_with_bed = 1
|
||||
thumbnails_custom_color = 1
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
z_step = 0.0025
|
||||
printer_variant = 0.4
|
||||
default_print_profile = 0.15mm OPTIMAL
|
||||
default_filament_profile = Caribou PLA @Caribou
|
||||
|
||||
|
||||
@@ -0,0 +1,71 @@
|
||||
[printer:*common_CaribouMK3*]
|
||||
printer_technology = FFF
|
||||
bed_shape = 0x0,250x0,250x210,0x210
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
|
||||
between_objects_gcode =
|
||||
deretract_speed = 0
|
||||
end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors
|
||||
extruder_offset = 0x0
|
||||
extruder_colour = #02F010
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 45
|
||||
gcode_flavor = marlin
|
||||
silent_mode = 0
|
||||
remaining_times = 1
|
||||
machine_max_acceleration_e = 10000
|
||||
machine_max_acceleration_extruding = 2000
|
||||
machine_max_acceleration_retracting = 1500
|
||||
machine_max_acceleration_x = 9000
|
||||
machine_max_acceleration_y = 9000
|
||||
machine_max_acceleration_z = 500
|
||||
machine_max_feedrate_e = 120
|
||||
machine_max_feedrate_x = 500
|
||||
machine_max_feedrate_y = 500
|
||||
machine_max_feedrate_z = 12
|
||||
machine_max_jerk_e = 2.5
|
||||
machine_max_jerk_x = 10
|
||||
machine_max_jerk_y = 10
|
||||
machine_max_jerk_z = 0.2
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
max_layer_height = 0.3
|
||||
min_layer_height = 0.05
|
||||
max_print_height = 200
|
||||
nozzle_diameter = 0.4
|
||||
octoprint_apikey =
|
||||
octoprint_host =
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CARIBOU3D\nPRINTER_MODEL_MK3S\n
|
||||
printer_settings_id =
|
||||
retract_before_travel = 1
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 1
|
||||
retract_length = 0.4
|
||||
retract_length_toolchange = 4
|
||||
retract_lift = 0.4
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 199
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 25
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = M862.1 P[nozzle_diameter] ; nozzle diameter check\nG28 W ; home all without mesh bed level\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nG0 X60 Y-3 Z80 ; move extruder above bed, keep extruder in front for cleaning and checking\nM104 S160 T0; pre-heat extruder to 160C\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 N7 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
thumbnails = 16x16,220x124
|
||||
thumbnails_color = #02F010
|
||||
thumbnails_custom_color = 1
|
||||
thumbnails_end_file = 0
|
||||
thumbnails_with_bed = 1
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
z_step = 0.0025
|
||||
printer_variant = 0.4
|
||||
default_print_profile = 0.15mm OPTIMAL @Caribou
|
||||
default_filament_profile = Caribou PLA @Caribou
|
||||
|
||||
@@ -0,0 +1,90 @@
|
||||
[printer:*common_CaribouM_printer*]
|
||||
autoemit_temperature_commands = 1
|
||||
bed_custom_model =
|
||||
bed_custom_texture =
|
||||
bed_shape = 0x0,180x0,180x180,0x180
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
|
||||
between_objects_gcode =
|
||||
binary_gcode = 1
|
||||
color_change_gcode = M600
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = "Prusament PLA"
|
||||
default_print_profile =
|
||||
deretract_speed = 40
|
||||
end_gcode = print_end ;end script from macro
|
||||
extra_loading_move = -2
|
||||
extruder_colour = ""
|
||||
extruder_offset = 0x0
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 45
|
||||
gcode_flavor = klipper
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = prusalink
|
||||
inherits =
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
machine_limits_usage = time_estimate_only
|
||||
machine_max_acceleration_e = 5000
|
||||
machine_max_acceleration_extruding = 2000
|
||||
machine_max_acceleration_retracting = 1250
|
||||
machine_max_acceleration_travel = 2500
|
||||
machine_max_acceleration_x = 2500
|
||||
machine_max_acceleration_y = 2500
|
||||
machine_max_acceleration_z = 400
|
||||
machine_max_feedrate_e = 80
|
||||
machine_max_feedrate_x = 180
|
||||
machine_max_feedrate_y = 180
|
||||
machine_max_feedrate_z = 12
|
||||
machine_max_jerk_e = 10
|
||||
machine_max_jerk_x = 8
|
||||
machine_max_jerk_y = 8
|
||||
machine_max_jerk_z = 2
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
max_layer_height = 0.25
|
||||
max_print_height = 180
|
||||
min_layer_height = 0.07
|
||||
multimaterial_purging = 140
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
pause_print_gcode = M601
|
||||
print_host =
|
||||
printer_model = Caribou_M
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CARIBOU3D\nPRINTER_MODEL_CaribouM\n
|
||||
printer_settings_id =
|
||||
printer_technology = FFF
|
||||
printer_variant = 0.4
|
||||
printer_vendor =
|
||||
printhost_apikey =
|
||||
printhost_cafile =
|
||||
remaining_times = 1
|
||||
retract_before_travel = 1.5
|
||||
retract_before_wipe = 70%
|
||||
retract_layer_change = 1
|
||||
retract_length = 3.2
|
||||
retract_length_toolchange = 4
|
||||
retract_lift = 0.2
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 179
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 70
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = print_start EXTRUDER=[first_layer_temperature[initial_tool]] BED=[first_layer_bed_temperature]
|
||||
template_custom_gcode =
|
||||
thumbnails = 64x64,400x300
|
||||
thumbnails_format = PNG
|
||||
toolchange_gcode =
|
||||
travel_lift_before_obstacle = 0
|
||||
travel_max_lift = 0
|
||||
travel_ramping_lift = 0
|
||||
travel_slope = 0
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
|
||||
|
||||
Reference in New Issue
Block a user