mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-10-02 10:37:16 +00:00
Initial Profile Sources
This commit is contained in:
Dark98
@@ -0,0 +1,174 @@
|
||||
[print:Cocoa Press (0.5mm layerheight)]
|
||||
inherits =
|
||||
avoid_crossing_curled_overhangs = 0
|
||||
avoid_crossing_perimeters = 0
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 2
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 1500
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 1
|
||||
bridge_speed = 20
|
||||
brim_separation = 0
|
||||
brim_type = outer_only
|
||||
brim_width = 0
|
||||
compatible_printers = "Cocoa Press｜0.8mm"
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_COCOA_PRESS.*/ and printer_notes=~/.*PRINTER_MATERIAL_PASTE.*/ and nozzle_diameter[0]==0.8
|
||||
complete_objects = 0
|
||||
default_acceleration = 1500
|
||||
dont_support_bridges = 1
|
||||
draft_shield = disabled
|
||||
elefant_foot_compensation = 0
|
||||
enable_dynamic_overhang_speeds = 1
|
||||
external_perimeter_acceleration = 0
|
||||
external_perimeter_extrusion_width = 0
|
||||
external_perimeter_speed = 25
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extra_perimeters_on_overhangs = 0
|
||||
extrusion_width = 0
|
||||
fill_angle = 45
|
||||
fill_density = 25%
|
||||
fill_pattern = grid
|
||||
first_layer_acceleration = 1500
|
||||
first_layer_acceleration_over_raft = 0
|
||||
first_layer_extrusion_width = 0
|
||||
first_layer_height = 0.4
|
||||
first_layer_speed = 15
|
||||
first_layer_speed_over_raft = 30
|
||||
fuzzy_skin = none
|
||||
fuzzy_skin_point_dist = 0.8
|
||||
fuzzy_skin_thickness = 0.3
|
||||
gap_fill_enabled = 0
|
||||
gap_fill_speed = 0
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 1
|
||||
gcode_resolution = 0.0125
|
||||
gcode_substitutions = "(;PAUSE_PRINT)(\\n|\\r\\n|\\r)(.*?)(M117)";"\\n;MOVE_BEFORE_PAUSE\\n;PAUSED_PRINT_MACRO\\n;END_MOVE_BEFORE_PAUSE\\n$1$2M0";r;"Pause command allows you to get a full screen message.";"(;PAUSED_PRINT_MACRO)(.*?)(\\n|\\r\\n|\\r)";"\\nM83;\\nG1 E-.2 F400;\\nG91;\\nG0 Z10;\\nG90;\\nM83;\\nG0 X70 Y135 F90000;\\nM17;\\n";r;"The second half of the \"manual pause\" is in the custom g-code box in Printer Settings."
|
||||
infill_acceleration = 1500
|
||||
infill_anchor = 600%
|
||||
infill_anchor_max = 50
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0
|
||||
infill_first = 0
|
||||
infill_overlap = 50%
|
||||
infill_speed = 40
|
||||
interface_shells = 0
|
||||
ironing = 0
|
||||
ironing_flowrate = 15%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 15
|
||||
ironing_type = top
|
||||
layer_height = 0.5
|
||||
max_print_speed = 80
|
||||
max_volumetric_extrusion_rate_slope_negative = 0
|
||||
max_volumetric_extrusion_rate_slope_positive = 0
|
||||
max_volumetric_speed = 0
|
||||
min_bead_width = 85%
|
||||
min_feature_size = 25%
|
||||
min_skirt_length = 0
|
||||
mmu_segmented_region_max_width = 0
|
||||
notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = {input_filename_base}_{nozzle_diameter[initial_tool]}n_{print_time}_{round(total_weight)}g.gcode
|
||||
overhang_speed_0 = 12
|
||||
overhang_speed_1 = 15
|
||||
overhang_speed_2 = 20
|
||||
overhang_speed_3 = 25
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 1500
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0
|
||||
perimeter_generator = arachne
|
||||
perimeter_speed = 35
|
||||
perimeters = 2
|
||||
post_process =
|
||||
print_settings_id = 0.5mm Speed2
|
||||
raft_contact_distance = 0.1
|
||||
raft_expansion = 1.5
|
||||
raft_first_layer_density = 90%
|
||||
raft_first_layer_expansion = 3
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = rear
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 5
|
||||
skirt_height = 1
|
||||
skirts = 0
|
||||
slice_closing_radius = 0.049
|
||||
slicing_mode = regular
|
||||
small_perimeter_speed = 20
|
||||
solid_infill_acceleration = 0
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0
|
||||
solid_infill_speed = 40
|
||||
spiral_vase = 0
|
||||
staggered_inner_seams = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 0
|
||||
support_material_bottom_contact_distance = 0
|
||||
support_material_bottom_interface_layers = -1
|
||||
support_material_buildplate_only = 0
|
||||
support_material_closing_radius = 2
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 0
|
||||
support_material_extrusion_width = 0
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 0
|
||||
support_material_interface_pattern = rectilinear
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = honeycomb
|
||||
support_material_spacing = 5
|
||||
support_material_speed = 25
|
||||
support_material_style = organic
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 0
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 50%
|
||||
support_tree_angle = 40
|
||||
support_tree_angle_slow = 25
|
||||
support_tree_branch_diameter = 2
|
||||
support_tree_branch_diameter_angle = 5
|
||||
support_tree_branch_diameter_double_wall = 3
|
||||
support_tree_branch_distance = 1
|
||||
support_tree_tip_diameter = 0.8
|
||||
support_tree_top_rate = 15%
|
||||
thick_bridges = 1
|
||||
thin_walls = 0
|
||||
threads = 12
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0
|
||||
top_solid_infill_acceleration = 0
|
||||
top_solid_infill_speed = 25
|
||||
top_solid_layers = 5
|
||||
top_solid_min_thickness = 0
|
||||
travel_acceleration = 0
|
||||
travel_speed = 100
|
||||
travel_speed_z = 0
|
||||
wall_distribution_count = 1
|
||||
wall_transition_angle = 10
|
||||
wall_transition_filter_deviation = 25%
|
||||
wall_transition_length = 100%
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_brim_width = 2
|
||||
wipe_tower_cone_angle = 0
|
||||
wipe_tower_extra_spacing = 100%
|
||||
wipe_tower_extruder = 0
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
||||
Reference in New Issue
Block a user