Initial Profile Sources

2026-10-01 02:27:17 +00:00 · 2026-03-19 01:54:47 +00:00
parent 7e2e8f9d47
commit 1f7873734a
13374 changed files with 256890 additions and 0 deletions
@@ -0,0 +1,10 @@
+[filament:E2D PETG @E2D]
+inherits = *PETG*
+filament_vendor = E2D
+filament_notes="https://e2d.tw/product-category/3dp/pauo"
+first_layer_temperature = 240
+first_layer_bed_temperature = 70
+temperature = 235
+bed_temperature = 70
+filament_density = 1.24
+filament_cost = 560
@@ -0,0 +1,7 @@
+[filament:E2D PLA @E2D]
+inherits = *PLA*
+filament_vendor = E2D
+filament_notes="https://e2d.tw/product-category/3dp/pauo"
+filament_density = 1.24
+filament_cost = 480
+
@@ -0,0 +1,11 @@
+[filament:E2D PLA+ @E2D]
+inherits = *PLA*
+filament_vendor = E2D
+filament_notes="https://e2d.tw/product-category/3dp/pauo"
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+temperature = 210
+bed_temperature = 60
+filament_density = 1.24
+filament_cost = 480
+
@@ -0,0 +1,11 @@
+[filament:E2D PLA-Silk @E2D]
+inherits = *PLA*
+filament_vendor = E2D
+filament_notes="https://e2d.tw/product-category/3dp/pauo"
+first_layer_temperature = 230
+first_layer_bed_temperature = 60
+temperature = 225
+bed_temperature = 60
+filament_density = 1.24
+filament_cost = 520
+
@@ -0,0 +1,4 @@
+[filament:Generic ABS @E2D]
+inherits = *ABS*
+filament_vendor = Generic
+
@@ -0,0 +1,4 @@
+[filament:Generic PETG @E2D]
+inherits = *PETG*
+filament_vendor = Generic
+
@@ -0,0 +1,4 @@
+[filament:Generic PLA @E2D]
+inherits = *PLA*
+filament_vendor = Generic
+
@@ -0,0 +1,11 @@
+[filament:*ABS*]
+inherits = *common*
+first_layer_temperature = 230
+first_layer_bed_temperature = 90
+temperature = 240
+bed_temperature = 90
+fan_always_on = 0
+cooling = 0
+min_print_speed = 60
+filament_type = ABS
+
@@ -0,0 +1,16 @@
+[filament:*PETG*]
+inherits = *common*
+first_layer_temperature = 240
+first_layer_bed_temperature = 70
+temperature = 235
+bed_temperature = 70
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 30
+max_fan_speed = 50
+bridge_fan_speed = 50
+fan_below_layer_time = 20
+slowdown_below_layer_time = 20
+min_print_speed = 80
+filament_type = PETG
+
@@ -0,0 +1,11 @@
+[filament:*PLA*]
+inherits = *common*
+first_layer_temperature = 200
+first_layer_bed_temperature = 60
+temperature = 195
+bed_temperature = 60
+fan_always_on = 1
+cooling = 1
+min_print_speed = 90
+filament_type = PLA
+
@@ -0,0 +1,6 @@
+[filament:*common*]
+filament_diameter = 1.75
+filament_settings_id = ""
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/
+
@@ -0,0 +1,271 @@
+{
+  "repo": {
+    "id": "non-prusa-fff",
+    "name": "Other FFF",
+    "description": "FFF Printers by other vendors",
+    "visibility": ""
+  },
+  "vendor": "E2D",
+  "version": "1.1.0",
+  "index_name": "E2D.idx",
+  "section_order": [
+    {
+      "type": "vendor",
+      "name": "vendor",
+      "path": "vendor/vendor.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "i311",
+      "path": "printer_model/i311.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "i310",
+      "path": "printer_model/i310.ini"
+    },
+    {
+      "type": "print",
+      "name": "*common*",
+      "path": "print/_common_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.3nozzle*",
+      "path": "print/_0.3nozzle_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.4nozzle*",
+      "path": "print/_0.4nozzle_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.05mm*",
+      "path": "print/_0.05mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.08mm*",
+      "path": "print/_0.08mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.10mm*",
+      "path": "print/_0.10mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.12mm*",
+      "path": "print/_0.12mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.15mm*",
+      "path": "print/_0.15mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.16mm*",
+      "path": "print/_0.16mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.20mm*",
+      "path": "print/_0.20mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.25mm*",
+      "path": "print/_0.25mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.30mm*",
+      "path": "print/_0.30mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.40mm*",
+      "path": "print/_0.40mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*i310*",
+      "path": "print/_i310_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*i311*",
+      "path": "print/_i311_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.10mm DETAIL @E2D i310",
+      "path": "print/0.10mm DETAIL @E2D i310.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.20mm QUALITY @E2D i310",
+      "path": "print/0.20mm QUALITY @E2D i310.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.20mm NORMAL @E2D i310",
+      "path": "print/0.20mm NORMAL @E2D i310.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.25mm DRAFT @E2D i310",
+      "path": "print/0.25mm DRAFT @E2D i310.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.05mm DETAIL @E2D 0.30 nozzle i310",
+      "path": "print/0.05mm DETAIL @E2D 0.30 nozzle i310.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.10mm NORMAL @E2D 0.30 nozzle i310",
+      "path": "print/0.10mm NORMAL @E2D 0.30 nozzle i310.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.20mm DRAFT @E2D 0.30 nozzle i310",
+      "path": "print/0.20mm DRAFT @E2D 0.30 nozzle i310.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.10mm DETAIL @E2D i311",
+      "path": "print/0.10mm DETAIL @E2D i311.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.15mm QUALITY @E2D i311",
+      "path": "print/0.15mm QUALITY @E2D i311.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.20mm NORMAL @E2D i311",
+      "path": "print/0.20mm NORMAL @E2D i311.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.08mm DETAIL @E2D 0.30 nozzle i311",
+      "path": "print/0.08mm DETAIL @E2D 0.30 nozzle i311.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.16mm SPEED @E2D 0.30 nozzle i311",
+      "path": "print/0.16mm SPEED @E2D 0.30 nozzle i311.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.16mm QUALITY @E2D 0.30 nozzle i311",
+      "path": "print/0.16mm QUALITY @E2D 0.30 nozzle i311.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.20mm NORMAL @E2D 0.30 nozzle i311",
+      "path": "print/0.20mm NORMAL @E2D 0.30 nozzle i311.ini"
+    },
+    {
+      "type": "printer",
+      "name": "*common*",
+      "path": "printer/_common_.ini"
+    },
+    {
+      "type": "printer",
+      "name": "*i310*",
+      "path": "printer/_i310_.ini"
+    },
+    {
+      "type": "printer",
+      "name": "*i311*",
+      "path": "printer/_i311_.ini"
+    },
+    {
+      "type": "printer",
+      "name": "E2D i310 0.4 nozzle",
+      "path": "printer/E2D i310 0.4 nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "E2D i310 0.3 nozzle",
+      "path": "printer/E2D i310 0.3 nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "E2D i311 0.4 nozzle",
+      "path": "printer/E2D i311 0.4 nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "E2D i311 0.3 nozzle",
+      "path": "printer/E2D i311 0.3 nozzle.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*common*",
+      "path": "filament/_common_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*PLA*",
+      "path": "filament/_PLA_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*PETG*",
+      "path": "filament/_PETG_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*ABS*",
+      "path": "filament/_ABS_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic PLA @E2D",
+      "path": "filament/Generic PLA @E2D.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic PETG @E2D",
+      "path": "filament/Generic PETG @E2D.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic ABS @E2D",
+      "path": "filament/Generic ABS @E2D.ini"
+    },
+    {
+      "type": "filament",
+      "name": "E2D PLA @E2D",
+      "path": "filament/E2D PLA @E2D.ini"
+    },
+    {
+      "type": "filament",
+      "name": "E2D PLA+ @E2D",
+      "path": "filament/E2D PLA+ @E2D.ini"
+    },
+    {
+      "type": "filament",
+      "name": "E2D PLA-Silk @E2D",
+      "path": "filament/E2D PLA-Silk @E2D.ini"
+    },
+    {
+      "type": "filament",
+      "name": "E2D PETG @E2D",
+      "path": "filament/E2D PETG @E2D.ini"
+    }
+  ],
+  "asset_paths": [
+    "i310.svg",
+    "i310_bed.stl",
+    "i310_thumbnail.png",
+    "i311.svg",
+    "i311_bed.stl",
+    "i311_thumbnail.png"
+  ]
+}
@@ -0,0 +1,5 @@
+[print:0.05mm DETAIL @E2D 0.30 nozzle i310]
+inherits = *0.05mm*; *0.3nozzle*; *i310*
+first_layer_height = 0.10
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i310.*/ and nozzle_diameter[0]==0.30
+
@@ -0,0 +1,52 @@
+[print:0.08mm DETAIL @E2D 0.30 nozzle i311]
+inherits = *0.08mm*; *0.3nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.30
+first_layer_height = 0.2
+top_solid_layers = 10
+bottom_solid_layers = 8
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+raft_contact_distance = 0.08
+support_material_contact_distance = 0.08
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+dont_support_bridges = 1
+perimeter_speed = 30
+small_perimeter_speed = 20
+external_perimeter_speed = 20
+infill_speed = 60
+solid_infill_speed = 60
+top_solid_infill_speed = 35
+support_material_speed = 40
+support_material_interface_speed = 80%
+bridge_speed = 20
+gap_fill_speed = 25
+ironing_speed = 15
+enable_dynamic_overhang_speeds = 1
+first_layer_speed = 20
+external_perimeter_acceleration = 500
+perimeter_acceleration = 600
+top_solid_infill_acceleration = 700
+solid_infill_acceleration = 800
+infill_acceleration = 1000
+bridge_acceleration = 600
+first_layer_acceleration = 600
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 0
+default_acceleration = 1000
+extrusion_width = 0.33
+first_layer_extrusion_width = 0.4
+perimeter_extrusion_width = 0.33
+external_perimeter_extrusion_width = 0.33
+infill_extrusion_width = 0.33
+solid_infill_extrusion_width = 0.33
+top_infill_extrusion_width = 0.3
+support_material_extrusion_width = 0.3
+infill_overlap = 10%
+elefant_foot_compensation = 0
+
@@ -0,0 +1,5 @@
+[print:0.10mm DETAIL @E2D i310]
+inherits = *0.10mm*; *0.4nozzle*; *i310*
+first_layer_height = 0.10
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i310.*/ and nozzle_diameter[0]==0.4
+
@@ -0,0 +1,53 @@
+[print:0.10mm DETAIL @E2D i311]
+inherits = *0.10mm*; *0.4nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.4
+first_layer_height = 0.20
+perimeters = 3
+top_solid_layers = 8
+bottom_solid_layers = 7
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+infill_anchor = 2
+raft_contact_distance = 0.15
+support_material_interface_layers = 5
+support_material_interface_spacing = 0.2
+support_material_contact_distance = 0.17
+perimeter_speed = 45
+small_perimeter_speed = 25
+external_perimeter_speed = 25
+infill_speed = 80
+solid_infill_speed = 80
+top_solid_infill_speed = 35
+support_material_speed = 40
+support_material_interface_speed = 85%
+bridge_speed = 20
+gap_fill_speed = 40
+ironing_speed = 15
+first_layer_speed = 20
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 500
+perimeter_acceleration = 700
+top_solid_infill_acceleration = 800
+solid_infill_acceleration = 1250
+infill_acceleration = 1500
+bridge_acceleration = 700
+first_layer_acceleration = 600
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 0
+default_acceleration = 1000
+extrusion_width = 0.45
+first_layer_extrusion_width = 0.5
+perimeter_extrusion_width = 0.4
+external_perimeter_extrusion_width = 0.4
+infill_extrusion_width = 0.4
+solid_infill_extrusion_width = 0.4
+top_infill_extrusion_width = 0.4
+support_material_extrusion_width = 0.35
+infill_overlap = 10%
+elefant_foot_compensation = 0.2
+
@@ -0,0 +1,5 @@
+[print:0.10mm NORMAL @E2D 0.30 nozzle i310]
+inherits = *0.10mm*; *0.3nozzle*; *i310*
+first_layer_height = 0.15
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i310.*/ and nozzle_diameter[0]==0.30
+
@@ -0,0 +1,51 @@
+[print:0.15mm QUALITY @E2D i311]
+inherits = *0.15mm*; *0.4nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.4
+first_layer_height = 0.20
+top_solid_layers = 6
+bottom_solid_layers = 5
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+infill_anchor = 2
+raft_contact_distance = 0.15
+support_material_interface_layers = 5
+support_material_interface_spacing = 0.2
+perimeter_speed = 45
+small_perimeter_speed = 25
+external_perimeter_speed = 25
+infill_speed = 120
+solid_infill_speed = 90
+top_solid_infill_speed = 40
+support_material_speed = 45
+support_material_interface_speed = 80%
+bridge_speed = 25
+gap_fill_speed = 40
+ironing_speed = 15
+first_layer_speed = 20
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 700
+perimeter_acceleration = 900
+top_solid_infill_acceleration = 800
+solid_infill_acceleration = 1500
+infill_acceleration = 2000
+bridge_acceleration = 1000
+first_layer_acceleration = 600
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 0
+default_acceleration = 1000
+extrusion_width = 0.45
+first_layer_extrusion_width = 0.5
+perimeter_extrusion_width = 0.45
+external_perimeter_extrusion_width = 0.45
+infill_extrusion_width = 0.45
+solid_infill_extrusion_width = 0.45
+top_infill_extrusion_width = 0.4
+support_material_extrusion_width = 0.37
+infill_overlap = 10%
+elefant_foot_compensation = 0.2
+
@@ -0,0 +1,61 @@
+[print:0.16mm QUALITY @E2D 0.30 nozzle i311]
+inherits = *0.16mm*; *0.3nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.30
+first_layer_height = 0.2
+top_solid_layers = 6
+bottom_solid_layers = 5
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+fill_density = 15%
+infill_anchor = 1
+raft_contact_distance = 0.12
+raft_first_layer_density = 90%
+support_material_threshold = 40
+raft_first_layer_expansion = 3.5
+support_material_contact_distance = 0.12
+support_material_interface_layers = 5
+support_material_interface_spacing = 0.2
+support_material_xy_spacing = 100%
+perimeter_speed = 80
+small_perimeter_speed = 45
+external_perimeter_speed = 45
+infill_speed = 120
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+support_material_speed = 70
+support_material_interface_speed = 75%
+bridge_speed = 30
+gap_fill_speed = 50
+ironing_speed = 15
+enable_dynamic_overhang_speeds = 1
+overhang_speed_0 = 15
+overhang_speed_1 = 25
+overhang_speed_2 = 30
+overhang_speed_3 = 80%
+first_layer_speed = 30
+external_perimeter_acceleration = 1500
+perimeter_acceleration = 2000
+top_solid_infill_acceleration = 1000
+solid_infill_acceleration = 2500
+infill_acceleration = 4000
+bridge_acceleration = 1000
+first_layer_acceleration = 500
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 4000
+default_acceleration = 2000
+extrusion_width = 0.34
+first_layer_extrusion_width = 0.4
+perimeter_extrusion_width = 0.34
+external_perimeter_extrusion_width = 0.34
+infill_extrusion_width = 0.34
+solid_infill_extrusion_width = 0.34
+top_infill_extrusion_width = 0.3
+support_material_extrusion_width = 0.3
+infill_overlap = 15%
+elefant_foot_compensation = 0
+
@@ -0,0 +1,62 @@
+[print:0.16mm SPEED @E2D 0.30 nozzle i311]
+inherits = *0.16mm*; *0.3nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.30
+first_layer_height = 0.2
+top_solid_layers = 6
+bottom_solid_layers = 5
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+fill_density = 20%
+infill_anchor = 1.5
+raft_contact_distance = 0.15
+raft_first_layer_density = 80%
+support_material_threshold = 45
+raft_first_layer_expansion = 3
+support_material_contact_distance = 0.15
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_xy_spacing = 60%
+perimeter_speed = 50
+small_perimeter_speed = 25
+external_perimeter_speed = 25
+infill_speed = 90
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+support_material_speed = 45
+support_material_interface_speed = 80%
+bridge_speed = 25
+gap_fill_speed = 40
+ironing_speed = 15
+enable_dynamic_overhang_speeds = 1
+overhang_speed_0 = 15
+overhang_speed_1 = 15
+overhang_speed_2 = 20
+overhang_speed_3 = 25
+first_layer_speed = 20
+external_perimeter_acceleration = 600
+perimeter_acceleration = 800
+top_solid_infill_acceleration = 800
+solid_infill_acceleration = 1250
+infill_acceleration = 2000
+bridge_acceleration = 800
+first_layer_acceleration = 600
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 0
+default_acceleration = 1000
+extrusion_width = 0.33
+first_layer_extrusion_width = 0.4
+perimeter_extrusion_width = 0.33
+external_perimeter_extrusion_width = 0.33
+infill_extrusion_width = 0.33
+solid_infill_extrusion_width = 0.33
+top_infill_extrusion_width = 0.3
+support_material_extrusion_width = 0.3
+infill_overlap = 10%
+elefant_foot_compensation = 0
+
+
@@ -0,0 +1,6 @@
+[print:0.20mm DRAFT @E2D 0.30 nozzle i310]
+inherits = *0.20mm*; *0.3nozzle*; *i310*
+first_layer_height = 0.20
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i310.*/ and nozzle_diameter[0]==0.30
+
+
@@ -0,0 +1,53 @@
+[print:0.20mm NORMAL @E2D 0.30 nozzle i311]
+inherits = *0.20mm*; *0.3nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.30
+first_layer_height = 0.20
+top_solid_layers = 5
+bottom_solid_layers = 4
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+raft_contact_distance = 0.18
+support_material_contact_distance = 0.18
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_xy_spacing = 60%
+perimeter_speed = 50
+small_perimeter_speed = 30
+external_perimeter_speed = 35
+infill_speed = 90
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+support_material_speed = 50
+support_material_interface_speed = 80%
+bridge_speed = 25
+gap_fill_speed = 45
+ironing_speed = 15
+enable_dynamic_overhang_speeds = 1
+first_layer_speed = 20
+external_perimeter_acceleration = 700
+perimeter_acceleration = 800
+top_solid_infill_acceleration = 800
+solid_infill_acceleration = 1250
+infill_acceleration = 2000
+bridge_acceleration = 800
+first_layer_acceleration = 600
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 0
+default_acceleration = 1250
+extrusion_width = 0.33
+first_layer_extrusion_width = 0.4
+perimeter_extrusion_width = 0.35
+external_perimeter_extrusion_width = 0.35
+infill_extrusion_width = 0.35
+solid_infill_extrusion_width = 0.35
+top_infill_extrusion_width = 0.3
+support_material_extrusion_width = 0.3
+infill_overlap = 10%
+elefant_foot_compensation = 0
+
+
@@ -0,0 +1,5 @@
+[print:0.20mm NORMAL @E2D i310]
+inherits = *0.20mm*; *0.4nozzle*; *i310*
+first_layer_height = 0.30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i310.*/ and nozzle_diameter[0]==0.4
+
@@ -0,0 +1,51 @@
+[print:0.20mm NORMAL @E2D i311]
+inherits = *0.20mm*; *0.4nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.4
+first_layer_height = 0.20
+top_solid_layers = 5
+bottom_solid_layers = 4
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+infill_anchor = 2
+raft_contact_distance = 0.2
+support_material_interface_layers = 5
+support_material_interface_spacing = 0.2
+perimeter_speed = 45
+small_perimeter_speed = 25
+external_perimeter_speed = 25
+infill_speed = 120
+solid_infill_speed = 90
+top_solid_infill_speed = 40
+support_material_speed = 50
+support_material_interface_speed = 70%
+bridge_speed = 25
+gap_fill_speed = 40
+ironing_speed = 15
+first_layer_speed = 20
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 700
+perimeter_acceleration = 900
+top_solid_infill_acceleration = 800
+solid_infill_acceleration = 1500
+infill_acceleration = 2000
+bridge_acceleration = 1000
+first_layer_acceleration = 600
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 0
+default_acceleration = 1000
+extrusion_width = 0.45
+first_layer_extrusion_width = 0.5
+perimeter_extrusion_width = 0.45
+external_perimeter_extrusion_width = 0.45
+infill_extrusion_width = 0.45
+solid_infill_extrusion_width = 0.45
+top_infill_extrusion_width = 0.4
+support_material_extrusion_width = 0.37
+infill_overlap = 10%
+elefant_foot_compensation = 0.2
+
@@ -0,0 +1,21 @@
+[print:0.20mm QUALITY @E2D i310]
+inherits = *0.20mm*; *0.4nozzle*; *i310*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i310.*/ and nozzle_diameter[0]==0.4
+first_layer_height = 0.20
+perimeters = 2
+top_solid_layers = 5
+bottom_solid_layers = 4
+fill_density = 40%
+perimeter_speed = 45
+small_perimeter_speed = 25
+external_perimeter_speed = 25
+infill_speed = 80
+solid_infill_speed = 45
+top_solid_infill_speed = 25
+support_material_speed = 50
+support_material_interface_speed = 100%
+bridge_speed = 30
+gap_fill_speed = 40
+travel_speed = 180
+first_layer_speed = 20
+
@@ -0,0 +1,6 @@
+[print:0.25mm DRAFT @E2D i310]
+inherits = *0.25mm*; *0.4nozzle*; *i310*
+first_layer_height = 0.25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i310.*/ and nozzle_diameter[0]==0.4
+
+
@@ -0,0 +1,4 @@
+[print:*0.05mm*]
+inherits = *common*
+layer_height = 0.05
+
@@ -0,0 +1,4 @@
+[print:*0.08mm*]
+inherits = *common*
+layer_height = 0.08
+
@@ -0,0 +1,4 @@
+[print:*0.10mm*]
+inherits = *common*
+layer_height = 0.10
+
@@ -0,0 +1,4 @@
+[print:*0.12mm*]
+inherits = *common*
+layer_height = 0.12
+
@@ -0,0 +1,4 @@
+[print:*0.15mm*]
+inherits = *common*
+layer_height = 0.15
+
@@ -0,0 +1,4 @@
+[print:*0.16mm*]
+inherits = *common*
+layer_height = 0.16
+
@@ -0,0 +1,4 @@
+[print:*0.20mm*]
+inherits = *common*
+layer_height = 0.2
+
@@ -0,0 +1,4 @@
+[print:*0.25mm*]
+inherits = *common*
+layer_height = 0.25
+
@@ -0,0 +1,4 @@
+[print:*0.30mm*]
+inherits = *common*
+layer_height = 0.30
+
@@ -0,0 +1,5 @@
+[print:*0.3nozzle*]
+extrusion_width = 0.3
+perimeters = 3
+fill_density = 20%
+
@@ -0,0 +1,5 @@
+[print:*0.40mm*]
+inherits = *common*
+layer_height = 0.40
+
+
@@ -0,0 +1,7 @@
+[print:*0.4nozzle*]
+extrusion_width = 0.4
+perimeters = 2
+fill_density = 15%
+support_material_xy_spacing = 80%
+support_material_contact_distance = 0.2
+
@@ -0,0 +1,28 @@
+[print:*common*]
+thin_walls = 0
+seam_position = aligned
+perimeter_generator = arachne
+fill_pattern = grid 
+infill_anchor = 1.5
+infill_anchor_max =12
+top_fill_pattern = monotoniclines
+solid_infill_below_area = 0
+skirts = 0
+skirt_distance = 2
+skirt_height = 3
+min_skirt_length = 4
+brim_separation = 0.1
+support_material_threshold = 45
+raft_first_layer_density = 80%
+support_material_style = snug
+support_material_with_sheath = 0
+support_material_spacing = 2.0
+support_material_bottom_interface_layers =  0
+dont_support_bridges = 0
+support_tree_angle_slow = 30
+support_tree_branch_diameter_angle = 3
+support_tree_tip_diameter = 0.6
+support_tree_top_rate = 30%
+wipe_tower_x = 170
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+
@@ -0,0 +1,7 @@
+[print:*i310*]
+inherits = *common*
+first_layer_speed = 30
+travel_speed = 130
+travel_speed_z = 0
+max_print_speed = 100
+
@@ -0,0 +1,6 @@
+[print:*i311*]
+inherits = *common*
+travel_speed = 200
+travel_speed_z = 12
+max_print_speed = 200
+
@@ -0,0 +1,10 @@
+[printer:E2D i310 0.3 nozzle]
+inherits = *i310*
+printer_model = i310
+nozzle_diameter = 0.3
+printer_variant = 0.3
+min_layer_height = 0.05
+max_layer_height = 0.22
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_E2D\nPRINTER_MODEL_i310
+default_print_profile = 0.20mm DRAFT @0.30 nozzle i310
+
@@ -0,0 +1,10 @@
+[printer:E2D i310 0.4 nozzle]
+inherits = *i310*
+printer_model = i310
+nozzle_diameter = 0.4
+printer_variant = 0.4
+min_layer_height = 0.10
+max_layer_height = 0.25
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_E2D\nPRINTER_MODEL_i310
+default_print_profile = 0.20mm NORMAL i310
+
@@ -0,0 +1,10 @@
+[printer:E2D i311 0.3 nozzle]
+inherits = *i311*
+printer_model = i311
+nozzle_diameter = 0.3
+printer_variant = 0.3
+min_layer_height = 0.05
+max_layer_height = 0.22
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_E2D\nPRINTER_MODEL_i311
+default_print_profile = 0.20mm NORMAL @0.30 nozzle i311
+
@@ -0,0 +1,10 @@
+[printer:E2D i311 0.4 nozzle]
+inherits = *i311*
+printer_model = i311
+nozzle_diameter = 0.4
+printer_variant = 0.4
+min_layer_height = 0.10
+max_layer_height = 0.25
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_E2D\nPRINTER_MODEL_i311
+default_print_profile = 0.20mm NORMAL i311
+
@@ -0,0 +1,11 @@
+[printer:*common*]
+printer_technology = FFF
+gcode_flavor = marlin2
+silent_mode = 0
+variable_layer_height = 1
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+machine_limits_usage = time_estimate_only
+extruder_clearance_radius = 40
+extruder_clearance_height = 20
+
@@ -0,0 +1,24 @@
+[printer:*i310*]
+inherits = *common*
+bed_shape = 0x0,200x0,200x200,0x200
+max_print_height = 200
+machine_max_feedrate_x = 185
+machine_max_feedrate_y = 185
+machine_max_feedrate_z = 9
+machine_max_feedrate_e =  20
+machine_max_acceleration_x = 3000
+machine_max_acceleration_y = 3000
+machine_max_acceleration_z = 100
+machine_max_acceleration_e = 600
+machine_max_acceleration_extruding = 600
+machine_max_acceleration_retracting = 600
+machine_max_acceleration_travel = 3000
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 0.3
+machine_max_jerk_e = 5.0
+retract_length = 1.8
+use_relative_e_distances = 1
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG29; Detailed Z-Probe\nG1 Z3 F240\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0.0\nG1 Y190 E15.0 F1500.0 ; intro line\nG1 X2.3 F5000\nG1 Y10 E30 F1200.0 ; intro line\nG92 E0.0
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+10, max_print_height)} F600{endif} ; Move print head up\nG1 X0 Y200 F3000 ; present print\nM84 X Y E ; disable motors
+
@@ -0,0 +1,39 @@
+[printer:*i311*]
+inherits = *common*
+bed_shape = 0x0,220x0,220x220,0x220
+max_print_height = 200
+silent_mode = 1
+machine_max_feedrate_x = 200,150
+machine_max_feedrate_y = 200,150
+machine_max_feedrate_z = 8,8
+machine_max_feedrate_e =  20,20
+machine_max_acceleration_x = 2000,1500
+machine_max_acceleration_y = 2000,2500
+machine_max_acceleration_z = 100,100
+machine_max_acceleration_e = 4000,2500
+machine_max_acceleration_extruding = 1200,1200
+machine_max_acceleration_retracting = 10000,20000
+machine_max_acceleration_travel =4000,2500
+machine_max_jerk_x = 10,10
+machine_max_jerk_y = 10,10
+machine_max_jerk_z = 0.3,0.3
+machine_max_jerk_e = 5.0,5.0
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG29; Detailed Z-Probe\n;M420 S1; Bed Leveling State\nG1 Z3 F240\nG1 X-5 Y2 F3000\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n;\n; Extrude purge line\n;\nG92 E0 ; reset extruder position\nG1 E{(filament_type[0] == "FLEX" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E7 X15 Z0.2 F500 ; purge\nG0 X25 E4 F500 ; purge\nG0 X35 E4 F650 ; purge\nG0 X45 E4 F800 ; purge\nG0 X{45 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{45 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\n\nG92 E0\nM221 S100 ; set flow to 100%
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+10, max_print_height)} F600{endif} ; Move print head up\nG27 ; present print\nG1 E-6 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nM84 X Y E ; disable motors
+use_relative_e_distances = 1
+retract_lift = 0.2
+travel_ramping_lift = 1
+travel_max_lift = 1.5
+travel_slope = 1
+retract_lift_above = 0
+retract_lift_below = 198
+retract_length = 0.7
+retract_speed = 35
+deretract_speed = 25
+retract_restart_extra = 0
+retract_before_travel = 1.5
+retract_layer_change = 1
+retract_before_wipe = 80%
+
@@ -0,0 +1,10 @@
+[printer_model:i310]
+name = E2D i310
+variants = 0.4; 0.3
+technology = FFF
+family = i3
+bed_model = i310_bed.stl
+bed_texture = i310.svg
+default_materials =  E2D PLA @E2D; E2D PLA+ @E2D; E2D PLA-Silk @E2D; PETG @E2D
+
+thumbnail = i310_thumbnail.png
@@ -0,0 +1,10 @@
+[printer_model:i311]
+name = E2D i311
+variants = 0.4; 0.3
+technology = FFF
+family = i3
+bed_model = i311_bed.stl
+bed_texture = i311.svg
+default_materials =  E2D PLA @E2D; E2D PLA+ @E2D; E2D PLA-Silk @E2D; PETG @E2D
+
+thumbnail = i311_thumbnail.png
@@ -0,0 +1,4 @@
+min_slic3r_version = 2.9.1-alpha0
+1.1.0 Extruder clearance moved to printer settings.
+min_slic3r_version = 2.8.0-alpha0
+1.0.0 Initial version
@@ -0,0 +1,7 @@
+[vendor]
+repo_id = non-prusa-fff
+name = E2D
+config_version = 1.1.0
+; config_update_url = https://e2d.tw/slicer/
+; changelog_url = https://e2d.tw/slicer/changelog.txt
+