Initial Profile Sources

profile_sources/non-prusa-fff/E2D/print/0.05mm DETAIL @E2D 0.30 nozzle i310.ini

@@ -0,0 +1,5 @@
+[print:0.05mm DETAIL @E2D 0.30 nozzle i310]
+inherits = *0.05mm*; *0.3nozzle*; *i310*
+first_layer_height = 0.10
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i310.*/ and nozzle_diameter[0]==0.30
+

profile_sources/non-prusa-fff/E2D/print/0.08mm DETAIL @E2D 0.30 nozzle i311.ini

@@ -0,0 +1,52 @@
+[print:0.08mm DETAIL @E2D 0.30 nozzle i311]
+inherits = *0.08mm*; *0.3nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.30
+first_layer_height = 0.2
+top_solid_layers = 10
+bottom_solid_layers = 8
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+raft_contact_distance = 0.08
+support_material_contact_distance = 0.08
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+dont_support_bridges = 1
+perimeter_speed = 30
+small_perimeter_speed = 20
+external_perimeter_speed = 20
+infill_speed = 60
+solid_infill_speed = 60
+top_solid_infill_speed = 35
+support_material_speed = 40
+support_material_interface_speed = 80%
+bridge_speed = 20
+gap_fill_speed = 25
+ironing_speed = 15
+enable_dynamic_overhang_speeds = 1
+first_layer_speed = 20
+external_perimeter_acceleration = 500
+perimeter_acceleration = 600
+top_solid_infill_acceleration = 700
+solid_infill_acceleration = 800
+infill_acceleration = 1000
+bridge_acceleration = 600
+first_layer_acceleration = 600
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 0
+default_acceleration = 1000
+extrusion_width = 0.33
+first_layer_extrusion_width = 0.4
+perimeter_extrusion_width = 0.33
+external_perimeter_extrusion_width = 0.33
+infill_extrusion_width = 0.33
+solid_infill_extrusion_width = 0.33
+top_infill_extrusion_width = 0.3
+support_material_extrusion_width = 0.3
+infill_overlap = 10%
+elefant_foot_compensation = 0
+

profile_sources/non-prusa-fff/E2D/print/0.10mm DETAIL @E2D i310.ini

@@ -0,0 +1,5 @@
+[print:0.10mm DETAIL @E2D i310]
+inherits = *0.10mm*; *0.4nozzle*; *i310*
+first_layer_height = 0.10
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i310.*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/E2D/print/0.10mm DETAIL @E2D i311.ini

@@ -0,0 +1,53 @@
+[print:0.10mm DETAIL @E2D i311]
+inherits = *0.10mm*; *0.4nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.4
+first_layer_height = 0.20
+perimeters = 3
+top_solid_layers = 8
+bottom_solid_layers = 7
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+infill_anchor = 2
+raft_contact_distance = 0.15
+support_material_interface_layers = 5
+support_material_interface_spacing = 0.2
+support_material_contact_distance = 0.17
+perimeter_speed = 45
+small_perimeter_speed = 25
+external_perimeter_speed = 25
+infill_speed = 80
+solid_infill_speed = 80
+top_solid_infill_speed = 35
+support_material_speed = 40
+support_material_interface_speed = 85%
+bridge_speed = 20
+gap_fill_speed = 40
+ironing_speed = 15
+first_layer_speed = 20
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 500
+perimeter_acceleration = 700
+top_solid_infill_acceleration = 800
+solid_infill_acceleration = 1250
+infill_acceleration = 1500
+bridge_acceleration = 700
+first_layer_acceleration = 600
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 0
+default_acceleration = 1000
+extrusion_width = 0.45
+first_layer_extrusion_width = 0.5
+perimeter_extrusion_width = 0.4
+external_perimeter_extrusion_width = 0.4
+infill_extrusion_width = 0.4
+solid_infill_extrusion_width = 0.4
+top_infill_extrusion_width = 0.4
+support_material_extrusion_width = 0.35
+infill_overlap = 10%
+elefant_foot_compensation = 0.2
+

profile_sources/non-prusa-fff/E2D/print/0.10mm NORMAL @E2D 0.30 nozzle i310.ini

@@ -0,0 +1,5 @@
+[print:0.10mm NORMAL @E2D 0.30 nozzle i310]
+inherits = *0.10mm*; *0.3nozzle*; *i310*
+first_layer_height = 0.15
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i310.*/ and nozzle_diameter[0]==0.30
+

profile_sources/non-prusa-fff/E2D/print/0.15mm QUALITY @E2D i311.ini

@@ -0,0 +1,51 @@
+[print:0.15mm QUALITY @E2D i311]
+inherits = *0.15mm*; *0.4nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.4
+first_layer_height = 0.20
+top_solid_layers = 6
+bottom_solid_layers = 5
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+infill_anchor = 2
+raft_contact_distance = 0.15
+support_material_interface_layers = 5
+support_material_interface_spacing = 0.2
+perimeter_speed = 45
+small_perimeter_speed = 25
+external_perimeter_speed = 25
+infill_speed = 120
+solid_infill_speed = 90
+top_solid_infill_speed = 40
+support_material_speed = 45
+support_material_interface_speed = 80%
+bridge_speed = 25
+gap_fill_speed = 40
+ironing_speed = 15
+first_layer_speed = 20
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 700
+perimeter_acceleration = 900
+top_solid_infill_acceleration = 800
+solid_infill_acceleration = 1500
+infill_acceleration = 2000
+bridge_acceleration = 1000
+first_layer_acceleration = 600
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 0
+default_acceleration = 1000
+extrusion_width = 0.45
+first_layer_extrusion_width = 0.5
+perimeter_extrusion_width = 0.45
+external_perimeter_extrusion_width = 0.45
+infill_extrusion_width = 0.45
+solid_infill_extrusion_width = 0.45
+top_infill_extrusion_width = 0.4
+support_material_extrusion_width = 0.37
+infill_overlap = 10%
+elefant_foot_compensation = 0.2
+

profile_sources/non-prusa-fff/E2D/print/0.16mm QUALITY @E2D 0.30 nozzle i311.ini

@@ -0,0 +1,61 @@
+[print:0.16mm QUALITY @E2D 0.30 nozzle i311]
+inherits = *0.16mm*; *0.3nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.30
+first_layer_height = 0.2
+top_solid_layers = 6
+bottom_solid_layers = 5
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+fill_density = 15%
+infill_anchor = 1
+raft_contact_distance = 0.12
+raft_first_layer_density = 90%
+support_material_threshold = 40
+raft_first_layer_expansion = 3.5
+support_material_contact_distance = 0.12
+support_material_interface_layers = 5
+support_material_interface_spacing = 0.2
+support_material_xy_spacing = 100%
+perimeter_speed = 80
+small_perimeter_speed = 45
+external_perimeter_speed = 45
+infill_speed = 120
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+support_material_speed = 70
+support_material_interface_speed = 75%
+bridge_speed = 30
+gap_fill_speed = 50
+ironing_speed = 15
+enable_dynamic_overhang_speeds = 1
+overhang_speed_0 = 15
+overhang_speed_1 = 25
+overhang_speed_2 = 30
+overhang_speed_3 = 80%
+first_layer_speed = 30
+external_perimeter_acceleration = 1500
+perimeter_acceleration = 2000
+top_solid_infill_acceleration = 1000
+solid_infill_acceleration = 2500
+infill_acceleration = 4000
+bridge_acceleration = 1000
+first_layer_acceleration = 500
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 4000
+default_acceleration = 2000
+extrusion_width = 0.34
+first_layer_extrusion_width = 0.4
+perimeter_extrusion_width = 0.34
+external_perimeter_extrusion_width = 0.34
+infill_extrusion_width = 0.34
+solid_infill_extrusion_width = 0.34
+top_infill_extrusion_width = 0.3
+support_material_extrusion_width = 0.3
+infill_overlap = 15%
+elefant_foot_compensation = 0
+

profile_sources/non-prusa-fff/E2D/print/0.16mm SPEED @E2D 0.30 nozzle i311.ini

@@ -0,0 +1,62 @@
+[print:0.16mm SPEED @E2D 0.30 nozzle i311]
+inherits = *0.16mm*; *0.3nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.30
+first_layer_height = 0.2
+top_solid_layers = 6
+bottom_solid_layers = 5
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+fill_density = 20%
+infill_anchor = 1.5
+raft_contact_distance = 0.15
+raft_first_layer_density = 80%
+support_material_threshold = 45
+raft_first_layer_expansion = 3
+support_material_contact_distance = 0.15
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_xy_spacing = 60%
+perimeter_speed = 50
+small_perimeter_speed = 25
+external_perimeter_speed = 25
+infill_speed = 90
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+support_material_speed = 45
+support_material_interface_speed = 80%
+bridge_speed = 25
+gap_fill_speed = 40
+ironing_speed = 15
+enable_dynamic_overhang_speeds = 1
+overhang_speed_0 = 15
+overhang_speed_1 = 15
+overhang_speed_2 = 20
+overhang_speed_3 = 25
+first_layer_speed = 20
+external_perimeter_acceleration = 600
+perimeter_acceleration = 800
+top_solid_infill_acceleration = 800
+solid_infill_acceleration = 1250
+infill_acceleration = 2000
+bridge_acceleration = 800
+first_layer_acceleration = 600
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 0
+default_acceleration = 1000
+extrusion_width = 0.33
+first_layer_extrusion_width = 0.4
+perimeter_extrusion_width = 0.33
+external_perimeter_extrusion_width = 0.33
+infill_extrusion_width = 0.33
+solid_infill_extrusion_width = 0.33
+top_infill_extrusion_width = 0.3
+support_material_extrusion_width = 0.3
+infill_overlap = 10%
+elefant_foot_compensation = 0
+
+

profile_sources/non-prusa-fff/E2D/print/0.20mm DRAFT @E2D 0.30 nozzle i310.ini

@@ -0,0 +1,6 @@
+[print:0.20mm DRAFT @E2D 0.30 nozzle i310]
+inherits = *0.20mm*; *0.3nozzle*; *i310*
+first_layer_height = 0.20
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i310.*/ and nozzle_diameter[0]==0.30
+
+

profile_sources/non-prusa-fff/E2D/print/0.20mm NORMAL @E2D 0.30 nozzle i311.ini

@@ -0,0 +1,53 @@
+[print:0.20mm NORMAL @E2D 0.30 nozzle i311]
+inherits = *0.20mm*; *0.3nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.30
+first_layer_height = 0.20
+top_solid_layers = 5
+bottom_solid_layers = 4
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+raft_contact_distance = 0.18
+support_material_contact_distance = 0.18
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_xy_spacing = 60%
+perimeter_speed = 50
+small_perimeter_speed = 30
+external_perimeter_speed = 35
+infill_speed = 90
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+support_material_speed = 50
+support_material_interface_speed = 80%
+bridge_speed = 25
+gap_fill_speed = 45
+ironing_speed = 15
+enable_dynamic_overhang_speeds = 1
+first_layer_speed = 20
+external_perimeter_acceleration = 700
+perimeter_acceleration = 800
+top_solid_infill_acceleration = 800
+solid_infill_acceleration = 1250
+infill_acceleration = 2000
+bridge_acceleration = 800
+first_layer_acceleration = 600
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 0
+default_acceleration = 1250
+extrusion_width = 0.33
+first_layer_extrusion_width = 0.4
+perimeter_extrusion_width = 0.35
+external_perimeter_extrusion_width = 0.35
+infill_extrusion_width = 0.35
+solid_infill_extrusion_width = 0.35
+top_infill_extrusion_width = 0.3
+support_material_extrusion_width = 0.3
+infill_overlap = 10%
+elefant_foot_compensation = 0
+
+

profile_sources/non-prusa-fff/E2D/print/0.20mm NORMAL @E2D i310.ini

@@ -0,0 +1,5 @@
+[print:0.20mm NORMAL @E2D i310]
+inherits = *0.20mm*; *0.4nozzle*; *i310*
+first_layer_height = 0.30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i310.*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/E2D/print/0.20mm NORMAL @E2D i311.ini

@@ -0,0 +1,51 @@
+[print:0.20mm NORMAL @E2D i311]
+inherits = *0.20mm*; *0.4nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.4
+first_layer_height = 0.20
+top_solid_layers = 5
+bottom_solid_layers = 4
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+infill_anchor = 2
+raft_contact_distance = 0.2
+support_material_interface_layers = 5
+support_material_interface_spacing = 0.2
+perimeter_speed = 45
+small_perimeter_speed = 25
+external_perimeter_speed = 25
+infill_speed = 120
+solid_infill_speed = 90
+top_solid_infill_speed = 40
+support_material_speed = 50
+support_material_interface_speed = 70%
+bridge_speed = 25
+gap_fill_speed = 40
+ironing_speed = 15
+first_layer_speed = 20
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 700
+perimeter_acceleration = 900
+top_solid_infill_acceleration = 800
+solid_infill_acceleration = 1500
+infill_acceleration = 2000
+bridge_acceleration = 1000
+first_layer_acceleration = 600
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 0
+default_acceleration = 1000
+extrusion_width = 0.45
+first_layer_extrusion_width = 0.5
+perimeter_extrusion_width = 0.45
+external_perimeter_extrusion_width = 0.45
+infill_extrusion_width = 0.45
+solid_infill_extrusion_width = 0.45
+top_infill_extrusion_width = 0.4
+support_material_extrusion_width = 0.37
+infill_overlap = 10%
+elefant_foot_compensation = 0.2
+

profile_sources/non-prusa-fff/E2D/print/0.20mm QUALITY @E2D i310.ini

@@ -0,0 +1,21 @@
+[print:0.20mm QUALITY @E2D i310]
+inherits = *0.20mm*; *0.4nozzle*; *i310*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i310.*/ and nozzle_diameter[0]==0.4
+first_layer_height = 0.20
+perimeters = 2
+top_solid_layers = 5
+bottom_solid_layers = 4
+fill_density = 40%
+perimeter_speed = 45
+small_perimeter_speed = 25
+external_perimeter_speed = 25
+infill_speed = 80
+solid_infill_speed = 45
+top_solid_infill_speed = 25
+support_material_speed = 50
+support_material_interface_speed = 100%
+bridge_speed = 30
+gap_fill_speed = 40
+travel_speed = 180
+first_layer_speed = 20
+

profile_sources/non-prusa-fff/E2D/print/0.25mm DRAFT @E2D i310.ini

@@ -0,0 +1,6 @@
+[print:0.25mm DRAFT @E2D i310]
+inherits = *0.25mm*; *0.4nozzle*; *i310*
+first_layer_height = 0.25
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i310.*/ and nozzle_diameter[0]==0.4
+
+

profile_sources/non-prusa-fff/E2D/print/_0.05mm_.ini

@@ -0,0 +1,4 @@
+[print:*0.05mm*]
+inherits = *common*
+layer_height = 0.05
+

profile_sources/non-prusa-fff/E2D/print/_0.08mm_.ini

@@ -0,0 +1,4 @@
+[print:*0.08mm*]
+inherits = *common*
+layer_height = 0.08
+

profile_sources/non-prusa-fff/E2D/print/_0.10mm_.ini

@@ -0,0 +1,4 @@
+[print:*0.10mm*]
+inherits = *common*
+layer_height = 0.10
+

profile_sources/non-prusa-fff/E2D/print/_0.12mm_.ini

@@ -0,0 +1,4 @@
+[print:*0.12mm*]
+inherits = *common*
+layer_height = 0.12
+

profile_sources/non-prusa-fff/E2D/print/_0.15mm_.ini

@@ -0,0 +1,4 @@
+[print:*0.15mm*]
+inherits = *common*
+layer_height = 0.15
+

profile_sources/non-prusa-fff/E2D/print/_0.16mm_.ini

@@ -0,0 +1,4 @@
+[print:*0.16mm*]
+inherits = *common*
+layer_height = 0.16
+

profile_sources/non-prusa-fff/E2D/print/_0.20mm_.ini

@@ -0,0 +1,4 @@
+[print:*0.20mm*]
+inherits = *common*
+layer_height = 0.2
+

profile_sources/non-prusa-fff/E2D/print/_0.25mm_.ini

@@ -0,0 +1,4 @@
+[print:*0.25mm*]
+inherits = *common*
+layer_height = 0.25
+

profile_sources/non-prusa-fff/E2D/print/_0.30mm_.ini

@@ -0,0 +1,4 @@
+[print:*0.30mm*]
+inherits = *common*
+layer_height = 0.30
+

profile_sources/non-prusa-fff/E2D/print/_0.3nozzle_.ini

@@ -0,0 +1,5 @@
+[print:*0.3nozzle*]
+extrusion_width = 0.3
+perimeters = 3
+fill_density = 20%
+

profile_sources/non-prusa-fff/E2D/print/_0.40mm_.ini

@@ -0,0 +1,5 @@
+[print:*0.40mm*]
+inherits = *common*
+layer_height = 0.40
+
+

profile_sources/non-prusa-fff/E2D/print/_0.4nozzle_.ini

@@ -0,0 +1,7 @@
+[print:*0.4nozzle*]
+extrusion_width = 0.4
+perimeters = 2
+fill_density = 15%
+support_material_xy_spacing = 80%
+support_material_contact_distance = 0.2
+

profile_sources/non-prusa-fff/E2D/print/_common_.ini

@@ -0,0 +1,28 @@
+[print:*common*]
+thin_walls = 0
+seam_position = aligned
+perimeter_generator = arachne
+fill_pattern = grid 
+infill_anchor = 1.5
+infill_anchor_max =12
+top_fill_pattern = monotoniclines
+solid_infill_below_area = 0
+skirts = 0
+skirt_distance = 2
+skirt_height = 3
+min_skirt_length = 4
+brim_separation = 0.1
+support_material_threshold = 45
+raft_first_layer_density = 80%
+support_material_style = snug
+support_material_with_sheath = 0
+support_material_spacing = 2.0
+support_material_bottom_interface_layers =  0
+dont_support_bridges = 0
+support_tree_angle_slow = 30
+support_tree_branch_diameter_angle = 3
+support_tree_tip_diameter = 0.6
+support_tree_top_rate = 30%
+wipe_tower_x = 170
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+

profile_sources/non-prusa-fff/E2D/print/_i310_.ini

@@ -0,0 +1,7 @@
+[print:*i310*]
+inherits = *common*
+first_layer_speed = 30
+travel_speed = 130
+travel_speed_z = 0
+max_print_speed = 100
+

profile_sources/non-prusa-fff/E2D/print/_i311_.ini

@@ -0,0 +1,6 @@
+[print:*i311*]
+inherits = *common*
+travel_speed = 200
+travel_speed_z = 12
+max_print_speed = 200
+