Initial Profile Sources

profile_sources/non-prusa-fff/E2D/print/0.16mm QUALITY @E2D 0.30 nozzle i311.ini

@@ -0,0 +1,61 @@
+[print:0.16mm QUALITY @E2D 0.30 nozzle i311]
+inherits = *0.16mm*; *0.3nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.30
+first_layer_height = 0.2
+top_solid_layers = 6
+bottom_solid_layers = 5
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+fill_density = 15%
+infill_anchor = 1
+raft_contact_distance = 0.12
+raft_first_layer_density = 90%
+support_material_threshold = 40
+raft_first_layer_expansion = 3.5
+support_material_contact_distance = 0.12
+support_material_interface_layers = 5
+support_material_interface_spacing = 0.2
+support_material_xy_spacing = 100%
+perimeter_speed = 80
+small_perimeter_speed = 45
+external_perimeter_speed = 45
+infill_speed = 120
+solid_infill_speed = 200
+top_solid_infill_speed = 50
+support_material_speed = 70
+support_material_interface_speed = 75%
+bridge_speed = 30
+gap_fill_speed = 50
+ironing_speed = 15
+enable_dynamic_overhang_speeds = 1
+overhang_speed_0 = 15
+overhang_speed_1 = 25
+overhang_speed_2 = 30
+overhang_speed_3 = 80%
+first_layer_speed = 30
+external_perimeter_acceleration = 1500
+perimeter_acceleration = 2000
+top_solid_infill_acceleration = 1000
+solid_infill_acceleration = 2500
+infill_acceleration = 4000
+bridge_acceleration = 1000
+first_layer_acceleration = 500
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 4000
+default_acceleration = 2000
+extrusion_width = 0.34
+first_layer_extrusion_width = 0.4
+perimeter_extrusion_width = 0.34
+external_perimeter_extrusion_width = 0.34
+infill_extrusion_width = 0.34
+solid_infill_extrusion_width = 0.34
+top_infill_extrusion_width = 0.3
+support_material_extrusion_width = 0.3
+infill_overlap = 15%
+elefant_foot_compensation = 0
+