Initial Profile Sources

profile_sources/non-prusa-fff/E2D/print/0.16mm SPEED @E2D 0.30 nozzle i311.ini

@@ -0,0 +1,62 @@
+[print:0.16mm SPEED @E2D 0.30 nozzle i311]
+inherits = *0.16mm*; *0.3nozzle*; *i311*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_E2D.*/ and printer_notes=~/.*PRINTER_MODEL_i311.*/ and nozzle_diameter[0]==0.30
+first_layer_height = 0.2
+top_solid_layers = 6
+bottom_solid_layers = 5
+top_solid_min_thickness = 0.7
+bottom_solid_min_thickness = 0.5
+extra_perimeters = 0
+detect_thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+fill_density = 20%
+infill_anchor = 1.5
+raft_contact_distance = 0.15
+raft_first_layer_density = 80%
+support_material_threshold = 45
+raft_first_layer_expansion = 3
+support_material_contact_distance = 0.15
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_xy_spacing = 60%
+perimeter_speed = 50
+small_perimeter_speed = 25
+external_perimeter_speed = 25
+infill_speed = 90
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+support_material_speed = 45
+support_material_interface_speed = 80%
+bridge_speed = 25
+gap_fill_speed = 40
+ironing_speed = 15
+enable_dynamic_overhang_speeds = 1
+overhang_speed_0 = 15
+overhang_speed_1 = 15
+overhang_speed_2 = 20
+overhang_speed_3 = 25
+first_layer_speed = 20
+external_perimeter_acceleration = 600
+perimeter_acceleration = 800
+top_solid_infill_acceleration = 800
+solid_infill_acceleration = 1250
+infill_acceleration = 2000
+bridge_acceleration = 800
+first_layer_acceleration = 600
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 0
+default_acceleration = 1000
+extrusion_width = 0.33
+first_layer_extrusion_width = 0.4
+perimeter_extrusion_width = 0.33
+external_perimeter_extrusion_width = 0.33
+infill_extrusion_width = 0.33
+solid_infill_extrusion_width = 0.33
+top_infill_extrusion_width = 0.3
+support_material_extrusion_width = 0.3
+infill_overlap = 10%
+elefant_foot_compensation = 0
+
+