Initial Profile Sources

profile_sources/non-prusa-fff/FLSun/filament/Generic ABS @FLSUN.ini

@@ -0,0 +1,4 @@
+[filament:Generic ABS @FLSUN]
+inherits = *ABS_flsunq*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/FLSun/filament/Generic FLEX @FLSUN.ini

@@ -0,0 +1,4 @@
+[filament:Generic FLEX @FLSUN]
+inherits = *FLEX_flsunq*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/FLSun/filament/Generic PETG @FLSUN.ini

@@ -0,0 +1,4 @@
+[filament:Generic PETG @FLSUN]
+inherits = *PET_flsunq*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/FLSun/filament/Generic PLA @FLSUN.ini

@@ -0,0 +1,4 @@
+[filament:Generic PLA @FLSUN]
+inherits = *PLA_flsunq*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/FLSun/filament/Generic PLA VASE @FLSUN.ini

@@ -0,0 +1,4 @@
+[filament:Generic PLA VASE @FLSUN]
+inherits = *PLA_VASE_flsunq*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/FLSun/filament/Generic SPLA @FLSUN.ini

@@ -0,0 +1,13 @@
+[filament:Generic SPLA @FLSUN]
+inherits = *SPLA_flsunq*
+filament_vendor = Generic
+
+#########################################
+######### end filament presets ##########
+#########################################
+
+#########################################
+######### begin printer presets #########
+#########################################
+
+# Common printer preset

profile_sources/non-prusa-fff/FLSun/filament/_ABS_flsunq_.ini

@@ -0,0 +1,25 @@
+[filament:*ABS_flsunq*]
+inherits = *common_flsunq*
+bed_temperature = 90
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_density = 1.04
+filament_deretract_speed = nil
+filament_retract_length = 5
+filament_retract_lift = nil
+filament_retract_speed = 50
+filament_max_volumetric_speed = 10
+filament_type = ABS
+filament_wipe = nil                   
+first_layer_bed_temperature = 90
+first_layer_temperature = 245
+max_fan_speed = 0
+min_fan_speed = 0
+slowdown_below_layer_time = 20
+temperature = 245
+top_fan_speed = 0
+

profile_sources/non-prusa-fff/FLSun/filament/_FLEX_flsunq_.ini

@@ -0,0 +1,25 @@
+[filament:*FLEX_flsunq*]
+inherits = *common_flsunq*
+bed_temperature = 50
+bridge_fan_speed = 80
+compatible_printers_condition = nozzle_diameter[0]>0.35
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1.15
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #0000FF
+filament_density = 1.22
+filament_deretract_speed = 25
+filament_max_volumetric_speed = 1.35
+filament_retract_length = 0.8
+filament_retract_lift = nil
+filament_retract_speed = nil
+filament_type = FLEX
+filament_wipe = 0
+first_layer_bed_temperature = 50
+first_layer_temperature = 240
+slowdown_below_layer_time = 10
+start_filament_gcode = "; Filament gcode\n;M900 K0; Disable Linear Advance 1.5\n"
+temperature = 240
+

profile_sources/non-prusa-fff/FLSun/filament/_PET_flsunq_.ini

@@ -0,0 +1,23 @@
+[filament:*PET_flsunq*]
+inherits = *common_flsunq*
+bed_temperature = 80
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FFFFFF
+filament_density = 1.27
+filament_deretract_speed = 25
+filament_max_volumetric_speed = 8
+filament_retract_length = 4
+filament_retract_lift = 0.2
+filament_retract_speed = 45
+filament_type = PETG
+filament_wipe = 1
+first_layer_bed_temperature =80
+first_layer_temperature = 240
+max_fan_speed = 50
+min_fan_speed = 20
+temperature = 230
+

profile_sources/non-prusa-fff/FLSun/filament/_PLA_VASE_flsunq_.ini

@@ -0,0 +1,10 @@
+[filament:*PLA_VASE_flsunq*]
+inherits = *PLA_flsunq*
+bridge_fan_speed = 100
+disable_fan_first_layers = 3
+fan_below_layer_time = 60
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+slowdown_below_layer_time = 5
+

profile_sources/non-prusa-fff/FLSun/filament/_PLA_flsunq_.ini

@@ -0,0 +1,23 @@
+[filament:*PLA_flsunq*]
+inherits = *common_flsunq*
+bed_temperature = 60
+bridge_fan_speed = 95
+cooling = 1
+disable_fan_first_layers = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_density = 1.24
+filament_deretract_speed = 30
+filament_retract_length = 3
+filament_retract_lift = nil
+filament_retract_speed = 30
+filament_max_volumetric_speed = 10
+filament_type = PLA 
+filament_wipe = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 205
+max_fan_speed = 90
+min_fan_speed = 50
+temperature = 200
+

profile_sources/non-prusa-fff/FLSun/filament/_SPLA_flsunq_.ini

@@ -0,0 +1,23 @@
+[filament:*SPLA_flsunq*]
+inherits = *common_flsunq*
+bed_temperature = 80
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #008000
+filament_density = 1.24
+filament_deretract_speed = 70
+filament_max_volumetric_speed = 8
+filament_retract_length = 7.5
+filament_retract_lift = nil
+filament_retract_speed = 70
+filament_type = PLA
+filament_wipe = nil
+first_layer_bed_temperature = 80
+first_layer_temperature = 230
+max_fan_speed = 70
+min_fan_speed = 50
+temperature = 215
+

profile_sources/non-prusa-fff/FLSun/filament/_common_flsunq_.ini

@@ -0,0 +1,17 @@
+[filament:*common_flsunq*]
+cooling = 0
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_fan_speed = 20
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = "; Filament gcode\n;M900 K{if nozzle_diameter[0]==0.6}0.12{else}0.22{endif} ; Linear Advance 1.5\n"
+                            

profile_sources/non-prusa-fff/FLSun/metadata.json

@@ -0,0 +1,256 @@
+{
+  "repo": {
+    "id": "non-prusa-fff",
+    "name": "Other FFF",
+    "description": "FFF Printers by other vendors",
+    "visibility": ""
+  },
+  "vendor": "FLSun",
+  "version": "1.1.0",
+  "index_name": "FLSun.idx",
+  "section_order": [
+    {
+      "type": "vendor",
+      "name": "vendor",
+      "path": "vendor/vendor.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "QQSP",
+      "path": "printer_model/QQSP.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "Q5",
+      "path": "printer_model/Q5.ini"
+    },
+    {
+      "type": "print",
+      "name": "*common_flsunq*",
+      "path": "print/_common_flsunq_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*QQSP*",
+      "path": "print/_QQSP_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*Q5*",
+      "path": "print/_Q5_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.6nozzleFLSUN*",
+      "path": "print/_0.6nozzleFLSUN_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.08mm_flsunq*",
+      "path": "print/_0.08mm_flsunq_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.08mm DETAIL @FLSUN",
+      "path": "print/0.08mm DETAIL @FLSUN.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.15mm_vase_flsunq*",
+      "path": "print/_0.15mm_vase_flsunq_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.15mm VASE @FLSUN",
+      "path": "print/0.15mm VASE @FLSUN.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.15mm VASE SPEED @FLSUN",
+      "path": "print/0.15mm VASE SPEED @FLSUN.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.16mm_flsunq*",
+      "path": "print/_0.16mm_flsunq_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.16mm QUALITY @FLSUN",
+      "path": "print/0.16mm QUALITY @FLSUN.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.16mm SPEED @FLSUN",
+      "path": "print/0.16mm SPEED @FLSUN.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.16mm DETAIL @0.6 nozzle FLSUN",
+      "path": "print/0.16mm DETAIL @0.6 nozzle FLSUN.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.20mm_flsunq*",
+      "path": "print/_0.20mm_flsunq_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.20mm QUALITY @FLSUN",
+      "path": "print/0.20mm QUALITY @FLSUN.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.20mm DETAIL @0.6 nozzle FLSUN",
+      "path": "print/0.20mm DETAIL @0.6 nozzle FLSUN.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.20mm SPEED @FLSUN",
+      "path": "print/0.20mm SPEED @FLSUN.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.24mm_flsunq*",
+      "path": "print/_0.24mm_flsunq_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.24mm DRAFT @FLSUN",
+      "path": "print/0.24mm DRAFT @FLSUN.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.30mm_flsunq*",
+      "path": "print/_0.30mm_flsunq_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.30mm QUALITY @0.6 nozzle FLSUN",
+      "path": "print/0.30mm QUALITY @0.6 nozzle FLSUN.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.30mm SPEED @FLSUN",
+      "path": "print/0.30mm SPEED @FLSUN.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.35mm_flsunq*",
+      "path": "print/_0.35mm_flsunq_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.35mm SPEED @0.6 nozzle FLSUN",
+      "path": "print/0.35mm SPEED @0.6 nozzle FLSUN.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.40mm_flsunq*",
+      "path": "print/_0.40mm_flsunq_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.40mm DRAFT @0.6 nozzle FLSUN",
+      "path": "print/0.40mm DRAFT @0.6 nozzle FLSUN.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*common_flsunq*",
+      "path": "filament/_common_flsunq_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*PLA_flsunq*",
+      "path": "filament/_PLA_flsunq_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*PLA_VASE_flsunq*",
+      "path": "filament/_PLA_VASE_flsunq_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*SPLA_flsunq*",
+      "path": "filament/_SPLA_flsunq_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*PET_flsunq*",
+      "path": "filament/_PET_flsunq_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*FLEX_flsunq*",
+      "path": "filament/_FLEX_flsunq_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*ABS_flsunq*",
+      "path": "filament/_ABS_flsunq_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic PLA @FLSUN",
+      "path": "filament/Generic PLA @FLSUN.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic PLA VASE @FLSUN",
+      "path": "filament/Generic PLA VASE @FLSUN.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic PETG @FLSUN",
+      "path": "filament/Generic PETG @FLSUN.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic ABS @FLSUN",
+      "path": "filament/Generic ABS @FLSUN.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic FLEX @FLSUN",
+      "path": "filament/Generic FLEX @FLSUN.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic SPLA @FLSUN",
+      "path": "filament/Generic SPLA @FLSUN.ini"
+    },
+    {
+      "type": "printer",
+      "name": "*common_flsunq*",
+      "path": "printer/_common_flsunq_.ini"
+    },
+    {
+      "type": "printer",
+      "name": "FLSun QQS Pro",
+      "path": "printer/FLSun QQS Pro.ini"
+    },
+    {
+      "type": "printer",
+      "name": "FLSun QQS Pro 0.6 nozzle",
+      "path": "printer/FLSun QQS Pro 0.6 nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "FLSun Q5",
+      "path": "printer/FLSun Q5.ini"
+    },
+    {
+      "type": "printer",
+      "name": "FLSun Q5 0.6 nozzle",
+      "path": "printer/FLSun Q5 0.6 nozzle.ini"
+    }
+  ],
+  "asset_paths": [
+    "Q5.svg",
+    "Q5_bed.stl",
+    "Q5_thumbnail.png",
+    "QQSP.svg",
+    "QQSP_bed.stl",
+    "QQSP_thumbnail.png"
+  ]
+}

profile_sources/non-prusa-fff/FLSun/print/0.08mm DETAIL @FLSUN.ini

@@ -0,0 +1,23 @@
+[print:0.08mm DETAIL @FLSUN]
+inherits = *0.08mm_flsunq*; *QQSP*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+bridge_acceleration = 200
+bridge_speed = 20
+external_perimeter_speed = 70%
+first_layer_acceleration = 500
+first_layer_speed = 40%
+gap_fill_speed = 20
+infill_acceleration = 800
+infill_speed = 40
+max_print_speed = 80
+perimeter_acceleration = 300
+perimeter_speed = 30 
+small_perimeter_speed = 70%
+solid_infill_speed = 95%
+support_material_speed = 40
+top_solid_infill_speed = 60%
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.15mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+

profile_sources/non-prusa-fff/FLSun/print/0.15mm VASE @FLSUN.ini

@@ -0,0 +1,11 @@
+[print:0.15mm VASE @FLSUN]
+inherits = *0.15mm_vase_flsunq*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+bottom_solid_layers = 5
+external_perimeter_speed = 50%
+gap_fill_speed = 40
+infill_speed = 100
+perimeter_speed = 80
+small_perimeter_speed = 25%
+solid_infill_speed = 33%
+

profile_sources/non-prusa-fff/FLSun/print/0.15mm VASE SPEED @FLSUN.ini

@@ -0,0 +1,16 @@
+[print:0.15mm VASE SPEED @FLSUN]
+inherits = *0.15mm_vase_flsunq*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+bridge_speed = 80
+bottom_solid_layers = 3
+external_perimeter_speed = 60%
+gap_fill_speed = 30
+infill_speed = 80
+perimeter_speed = 90
+small_perimeter_speed = 50%
+solid_infill_speed = 80%
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.16mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+

profile_sources/non-prusa-fff/FLSun/print/0.16mm DETAIL @0.6 nozzle FLSUN.ini

@@ -0,0 +1,17 @@
+[print:0.16mm DETAIL @0.6 nozzle FLSUN]
+inherits = *0.16mm_flsunq*; *0.6nozzleFLSUN*
+# alias = 0.16mm DETAIL
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_speed = 70
+max_print_speed = 80
+perimeter_speed = 40
+solid_infill_speed = 60
+top_solid_infill_speed = 45
+infill_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.65
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.20mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+

profile_sources/non-prusa-fff/FLSun/print/0.16mm QUALITY @FLSUN.ini

@@ -0,0 +1,13 @@
+[print:0.16mm QUALITY @FLSUN]
+inherits = *0.16mm_flsunq*; *QQSP*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 50%
+fill_density = 15%
+fill_pattern = gyroid
+infill_speed = 80
+ironing = 0
+perimeter_speed = 90
+small_perimeter_speed = 25%
+solid_infill_speed = 50%
+top_solid_infill_speed = 30%
+

profile_sources/non-prusa-fff/FLSun/print/0.16mm SPEED @FLSUN.ini

@@ -0,0 +1,10 @@
+[print:0.16mm SPEED @FLSUN]
+inherits = *0.16mm_flsunq*; *QQSP*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 50%
+infill_speed = 120
+perimeter_speed = 60
+small_perimeter_speed = 25%
+solid_infill_speed = 85%
+top_solid_infill_speed = 30%
+

profile_sources/non-prusa-fff/FLSun/print/0.20mm DETAIL @0.6 nozzle FLSUN.ini

@@ -0,0 +1,13 @@
+[print:0.20mm DETAIL @0.6 nozzle FLSUN]
+inherits = *0.20mm_flsunq*; *0.6nozzleFLSUN*
+# alias = 0.20mm DETAIL
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_speed = 70
+max_print_speed = 80
+perimeter_speed = 45
+solid_infill_speed = 60
+top_solid_infill_speed = 45
+infill_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.65
+

profile_sources/non-prusa-fff/FLSun/print/0.20mm QUALITY @FLSUN.ini

@@ -0,0 +1,17 @@
+[print:0.20mm QUALITY @FLSUN]
+inherits = *0.20mm_flsunq*; *QQSP*
+avoid_crossing_perimeters = 1
+bridge_speed = 60
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 50%
+fill_density = 15%
+gap_fill_speed = 30
+infill_speed = 80
+ironing = 0
+ironing_speed = 20
+perimeter_speed = 50
+small_perimeter_speed = 85%
+solid_infill_speed = 90%
+thin_walls = 0
+top_solid_infill_speed = 50%
+

profile_sources/non-prusa-fff/FLSun/print/0.20mm SPEED @FLSUN.ini

@@ -0,0 +1,16 @@
+[print:0.20mm SPEED @FLSUN]
+inherits = *0.20mm_flsunq*; *QQSP*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 50
+extra_perimeters = 1
+first_layer_speed = 35
+infill_speed = 90
+perimeter_speed = 60
+small_perimeter_speed = 50%
+solid_infill_speed = 85%
+top_solid_infill_speed = 40%
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.24mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+

profile_sources/non-prusa-fff/FLSun/print/0.24mm DRAFT @FLSUN.ini

@@ -0,0 +1,15 @@
+[print:0.24mm DRAFT @FLSUN]
+inherits = *0.24mm_flsunq*; *QQSP*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 50%
+first_layer_speed = 20%
+infill_speed = 120
+perimeter_speed = 60
+small_perimeter_speed = 50%
+solid_infill_speed = 95%
+top_solid_infill_speed = 50%
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.30mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+

profile_sources/non-prusa-fff/FLSun/print/0.30mm QUALITY @0.6 nozzle FLSUN.ini

@@ -0,0 +1,13 @@
+[print:0.30mm QUALITY @0.6 nozzle FLSUN]
+inherits = *0.30mm_flsunq*; *0.6nozzleFLSUN*
+# alias = 0.30mm QUALITY
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+infill_speed = 90
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 65
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+

profile_sources/non-prusa-fff/FLSun/print/0.30mm SPEED @FLSUN.ini

@@ -0,0 +1,15 @@
+[print:0.30mm SPEED @FLSUN]
+inherits = *0.30mm_flsunq*; *QQSP*
+compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
+external_perimeter_speed = 50%
+first_layer_speed = 20%
+infill_speed = 120
+perimeter_speed = 80
+small_perimeter_speed = 50%
+solid_infill_speed = 85%
+top_solid_infill_speed = 50%
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.35mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+

profile_sources/non-prusa-fff/FLSun/print/0.35mm SPEED @0.6 nozzle FLSUN.ini

@@ -0,0 +1,17 @@
+[print:0.35mm SPEED @0.6 nozzle FLSUN]
+inherits = *0.35mm_flsunq*; *0.6nozzleFLSUN*
+# alias = 0.35mm SPEED
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 45
+infill_speed = 100
+max_print_speed = 120
+perimeter_speed = 65
+solid_infill_speed = 60
+top_solid_infill_speed = 45
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.40mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+

profile_sources/non-prusa-fff/FLSun/print/0.40mm DRAFT @0.6 nozzle FLSUN.ini

@@ -0,0 +1,24 @@
+[print:0.40mm DRAFT @0.6 nozzle FLSUN]
+inherits = *0.40mm_flsunq*; *0.6nozzleFLSUN*
+# alias = 0.40mm DRAFT
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 60
+infill_speed = 100
+max_print_speed = 120
+perimeter_speed = 60
+solid_infill_speed = 60
+top_solid_infill_speed = 60
+external_perimeter_extrusion_width = 0.68
+perimeter_extrusion_width = 0.68
+infill_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+
+#########################################
+########### end print presets ###########
+#########################################
+
+#########################################
+######## begin filament presets #########
+#########################################    
+                                                                                                      
+# Common filament preset

profile_sources/non-prusa-fff/FLSun/print/_0.08mm_flsunq_.ini

@@ -0,0 +1,9 @@
+[print:*0.08mm_flsunq*]
+inherits = *common_flsunq*
+bottom_solid_layers = 10
+bridge_flow_ratio = 0.7
+layer_height = 0.08
+support_material_contact_distance = 0.06
+support_material_spacing = 1.5
+top_solid_layers = 12
+

profile_sources/non-prusa-fff/FLSun/print/_0.15mm_vase_flsunq_.ini

@@ -0,0 +1,34 @@
+[print:*0.15mm_vase_flsunq*]
+inherits = *common_flsunq*
+avoid_crossing_perimeters = 1
+bottom_solid_min_thickness = 0.5
+bridge_flow_ratio = 0.9
+elefant_foot_compensation = 0.15
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.9
+extra_perimeters = 1
+extrusion_width = 0.9
+first_layer_acceleration = 1000
+first_layer_height = 0.3
+first_layer_extrusion_width = 0.9
+first_layer_speed = 20
+fill_density = 0%
+infill_extrusion_width = 0.9
+ironing = 0
+layer_height = 0.15
+min_skirt_length = 4
+max_print_speed = 100
+only_retract_when_crossing_perimeters = 0
+perimeters = 1
+perimeter_extrusion_width = 0.9
+seam_position = aligned
+slice_closing_radius = 0.049
+solid_infill_extrusion_width = 0.6
+spiral_vase = 1
+support_material = 0
+top_solid_infill_speed = 40%
+top_solid_min_thickness = 0.6
+thin_walls = 0
+top_fill_pattern = rectilinear
+top_solid_layers = 0
+

profile_sources/non-prusa-fff/FLSun/print/_0.16mm_flsunq_.ini

@@ -0,0 +1,8 @@
+[print:*0.16mm_flsunq*]
+inherits = *common_flsunq*
+bottom_solid_layers = 5
+bridge_flow_ratio = 0.9
+layer_height = 0.16
+support_material_contact_distance = 0.12
+top_solid_layers = 6
+

profile_sources/non-prusa-fff/FLSun/print/_0.20mm_flsunq_.ini

@@ -0,0 +1,8 @@
+[print:*0.20mm_flsunq*]
+inherits = *common_flsunq*
+bottom_solid_layers = 4
+bridge_flow_ratio = 0.95
+layer_height = 0.20
+support_material_contact_distance = 0.2
+top_solid_layers = 5
+

profile_sources/non-prusa-fff/FLSun/print/_0.24mm_flsunq_.ini

@@ -0,0 +1,8 @@
+[print:*0.24mm_flsunq*]
+inherits = *common_flsunq*
+bottom_solid_layers = 4
+bridge_flow_ratio = 0.95
+layer_height = 0.24
+support_material_contact_distance = 0.18
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/FLSun/print/_0.30mm_flsunq_.ini

@@ -0,0 +1,14 @@
+[print:*0.30mm_flsunq*]
+inherits = *common_flsunq*
+bottom_solid_layers = 3
+bridge_flow_ratio = 0.95
+external_perimeter_extrusion_width = 0.6
+extrusion_width = 0.5
+infill_extrusion_width = 0.5
+layer_height = 0.30
+perimeter_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+support_material_contact_distance = 0.22
+top_infill_extrusion_width = 0.45
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/FLSun/print/_0.35mm_flsunq_.ini

@@ -0,0 +1,13 @@
+[print:*0.35mm_flsunq*]
+inherits = *common_flsunq*
+bottom_solid_layers = 3
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 40
+first_layer_extrusion_width = 0.75
+layer_height = 0.35
+perimeter_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 60
+top_solid_infill_speed = 50
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/FLSun/print/_0.40mm_flsunq_.ini

@@ -0,0 +1,17 @@
+[print:*0.40mm_flsunq*]
+inherits = *common_flsunq*
+bottom_solid_layers = 3
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 40
+first_layer_extrusion_width = 0.65
+infill_acceleration = 2000
+infill_speed = 60
+layer_height = 0.4
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 60
+top_solid_infill_speed = 40
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/FLSun/print/_0.6nozzleFLSUN_.ini

@@ -0,0 +1,29 @@
+[print:*0.6nozzleFLSUN*]
+bridge_acceleration = 1000
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+default_acceleration = 1000
+external_perimeter_extrusion_width = 0.65
+extrusion_width = 0.65
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+fill_density = 15%
+fill_pattern = gyroid
+infill_acceleration = 1000
+infill_extrusion_width = 0.68
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.68
+support_material_speed = 40
+support_material_contact_distance = 0.15
+support_material_extrusion_width = 0.55
+support_material_xy_spacing = 80%
+top_infill_extrusion_width = 0.6
+travel_speed = 150
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{print_time}.gco
+
+
+# XXXXXXXXXXXXXXXXXXXX
+# XXX--- 0.08mm ---XXX
+# XXXXXXXXXXXXXXXXXXXX
+

profile_sources/non-prusa-fff/FLSun/print/_Q5_.ini

@@ -0,0 +1,10 @@
+[print:*Q5*]
+bridge_acceleration = 1000
+default_acceleration = 800
+first_layer_acceleration = 800
+infill_acceleration = 1000
+max_print_speed = 150
+perimeter_acceleration = 800
+
+# Print parameters common to a 0.6mm diameter nozzle.
+

profile_sources/non-prusa-fff/FLSun/print/_QQSP_.ini

@@ -0,0 +1,10 @@
+[print:*QQSP*]
+bridge_acceleration = 1000
+default_acceleration = 1500
+first_layer_acceleration = 1000
+infill_acceleration = 800
+max_print_speed = 200
+perimeter_acceleration = 800
+
+## Q5
+

profile_sources/non-prusa-fff/FLSun/print/_common_flsunq_.ini

@@ -0,0 +1,109 @@
+[print:*common_flsunq*]
+avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 800
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 800
+dont_support_bridges = 1
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeters_first = 0
+external_perimeter_extrusion_width = 0.45
+extra_perimeters = 0
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 800
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 800
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+overhangs = 1
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gco
+perimeters = 3
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 45
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirts = 2
+skirt_distance = 5
+skirt_height = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_auto = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.38
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.2
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+top_solid_min_thickness = 0.6
+travel_speed = 150
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+## QQS
+

profile_sources/non-prusa-fff/FLSun/printer/FLSun Q5 0.6 nozzle.ini

@@ -0,0 +1,17 @@
+[printer:FLSun Q5 0.6 nozzle]
+inherits = FLSun Q5
+printer_variant = 0.6
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+default_print_profile = 0.30mm QUALITY @0.6 nozzle FLSUN
+retract_length = 3
+retract_lift = 0.4
+retract_speed = 50
+deretract_speed = 40
+retract_before_wipe = 0
+retract_before_travel = 1
+
+#########################################
+####### end common print presets ########
+#########################################

profile_sources/non-prusa-fff/FLSun/printer/FLSun Q5.ini

@@ -0,0 +1,30 @@
+[printer:FLSun Q5]
+inherits = *common_flsunq*
+bed_shape = 99.6195x8.71557,98.4808x17.3648,96.5926x25.8819,93.9693x34.202,90.6308x42.2618,86.6025x50,81.9152x57.3576,76.6044x64.2788,70.7107x70.7107,64.2788x76.6044,57.3576x81.9152,50x86.6025,42.2618x90.6308,34.202x93.9693,25.8819x96.5926,17.3648x98.4808,8.71557x99.6195,6.12323e-15x100,-8.71557x99.6195,-17.3648x98.4808,-25.8819x96.5926,-34.202x93.9693,-42.2618x90.6308,-50x86.6025,-57.3576x81.9152,-64.2788x76.6044,-70.7107x70.7107,-76.6044x64.2788,-81.9152x57.3576,-86.6025x50,-90.6308x42.2618,-93.9693x34.202,-96.5926x25.8819,-98.4808x17.3648,-99.6195x8.71557,-100x1.22465e-14,-99.6195x-8.71557,-98.4808x-17.3648,-96.5926x-25.8819,-93.9693x-34.202,-90.6308x-42.2618,-86.6025x-50,-81.9152x-57.3576,-76.6044x-64.2788,-70.7107x-70.7107,-64.2788x-76.6044,-57.3576x-81.9152,-50x-86.6025,-42.2618x-90.6308,-34.202x-93.9693,-25.8819x-96.5926,-17.3648x-98.4808,-8.71557x-99.6195,-1.83697e-14x-100,8.71557x-99.6195,17.3648x-98.4808,25.8819x-96.5926,34.202x-93.9693,42.2618x-90.6308,50x-86.6025,57.3576x-81.9152,64.2788x-76.6044,70.7107x-70.7107,76.6044x-64.2788,81.9152x-57.3576,86.6025x-50,90.6308x-42.2618,93.9693x-34.202,96.5926x-25.8819,98.4808x-17.3648,99.6195x-8.71557,100x-2.44929e-14
+end_gcode = M107\nM104 S0\nM140 S0\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\n;M84\nM18 S180 ;disable motors after 180s\n
+machine_max_acceleration_e = 3000
+machine_max_acceleration_extruding = 1500
+machine_max_acceleration_retracting = 2000
+machine_max_acceleration_x = 1500
+machine_max_acceleration_y = 1500
+machine_max_acceleration_z = 1500
+machine_max_feedrate_e = 60
+machine_max_feedrate_x = 200
+machine_max_feedrate_y = 200
+machine_max_feedrate_z = 200
+machine_max_jerk_e = 5
+machine_max_jerk_x = 5
+machine_max_jerk_y = 5
+machine_max_jerk_z = 5
+max_print_height = 200
+nozzle_diameter = 0.4
+printer_model = Q5
+printer_variant = 0.4
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSun\nPRINTER_MODEL_Q5\nPRINTER_HAS_BOWDEN\n
+retract_length = 3
+retract_lift = 0.3
+start_gcode = ;STARTGCODE\nM117 Initializing\n; G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM107\nG28 ;Home\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG92 E0\nG1 X-98 Y0 Z0.2 F4000 ; move to arc start\nG3 X0 Y-98 I98 Z0.2 E40 F400 ; lay arc stripe 90deg\nG0 Z1 \nG92 E0.0\n
+thumbnails = 16x16,200x200
+use_relative_e_distances = 1
+use_volumetric_e = 0
+

profile_sources/non-prusa-fff/FLSun/printer/FLSun QQS Pro 0.6 nozzle.ini

@@ -0,0 +1,14 @@
+[printer:FLSun QQS Pro 0.6 nozzle]
+inherits = FLSun QQS Pro
+printer_variant = 0.6
+nozzle_diameter = 0.6
+max_layer_height = 0.40
+min_layer_height = 0.15
+default_print_profile = 0.30mm QUALITY @0.6 nozzle FLSUN
+retract_length = 3.5
+retract_lift = 0.4
+retract_speed = 30
+deretract_speed = 40
+retract_before_wipe = 70%
+retract_before_travel = 1
+

profile_sources/non-prusa-fff/FLSun/printer/FLSun QQS Pro.ini

@@ -0,0 +1,32 @@
+[printer:FLSun QQS Pro]
+inherits = *common_flsunq*
+bed_shape = 129.505x11.3302,128.025x22.5743,125.57x33.6465,122.16x44.4626,117.82x54.9404,112.583x65,106.49x74.5649,99.5858x83.5624,91.9239x91.9239,83.5624x99.5858,74.5649x106.49,65x112.583,54.9404x117.82,44.4626x122.16,33.6465x125.57,22.5743x128.025,11.3302x129.505,7.9602e-15x130,-11.3302x129.505,-22.5743x128.025,-33.6465x125.57,-44.4626x122.16,-54.9404x117.82,-65x112.583,-74.5649x106.49,-83.5624x99.5858,-91.9239x91.9239,-99.5858x83.5624,-106.49x74.5649,-112.583x65,-117.82x54.9404,-122.16x44.4626,-125.57x33.6465,-128.025x22.5743,-129.505x11.3302,-130x1.59204e-14,-129.505x-11.3302,-128.025x-22.5743,-125.57x-33.6465,-122.16x-44.4626,-117.82x-54.9404,-112.583x-65,-106.49x-74.5649,-99.5858x-83.5624,-91.9239x-91.9239,-83.5624x-99.5858,-74.5649x-106.49,-65x-112.583,-54.9404x-117.82,-44.4626x-122.16,-33.6465x-125.57,-22.5743x-128.025,-11.3302x-129.505,-2.38806e-14x-130,11.3302x-129.505,22.5743x-128.025,33.6465x-125.57,44.4626x-122.16,54.9404x-117.82,65x-112.583,74.5649x-106.49,83.5624x-99.5858,91.9239x-91.9239,99.5858x-83.5624,106.49x-74.5649,112.583x-65,117.82x-54.9404,122.16x-44.4626,125.57x-33.6465,128.025x-22.5743,129.505x-11.3302,130x-3.18408e-14
+end_gcode = ; printing object ENDGCODE\nG92 E0.0 ; prepare to retract\nG1 E-6 F3000; retract to avoid stringing\n; Anti-stringing end wiggle\n{if layer_z < max_print_height}G1 Z{min(layer_z+100, max_print_height)}{endif} F4000 ; Move print head up\nG1 X0 Y120 F3000 ; present print\n; Reset print setting overrides\nG92 E0\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extruder factor to 100%\n;M900 K0 ; reset linear acceleration(Marlin)\n; Shut down printer\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM18 S180 ;disable motors after 180s\nM300 S40 P10 ; Bip\nM117 Print finish.
+machine_max_acceleration_e = 3000,800
+machine_max_acceleration_extruding = 1500,800
+machine_max_acceleration_retracting = 2000,800
+machine_max_acceleration_x = 1500,800
+machine_max_acceleration_y = 1500,800
+machine_max_acceleration_z = 1500,800
+machine_max_feedrate_e = 60,30
+machine_max_feedrate_x = 200,150
+machine_max_feedrate_y = 200,150
+machine_max_feedrate_z = 200,150
+machine_max_jerk_e = 5,5
+machine_max_jerk_x = 5,10
+machine_max_jerk_y = 5,10
+machine_max_jerk_z = 5,10
+max_print_height = 360
+nozzle_diameter = 0.4
+printer_model = QQSP
+printer_variant = 0.4
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSun\nPRINTER_MODEL_QQSP\nPRINTER_HAS_BOWDEN\n
+retract_length = 5
+retract_speed = 30
+retract_lift = 0.4
+silent_mode = 1
+start_gcode = ;STARTGCODE\nM117 Initializing\n; Set coordinate modes\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; Reset speed and extrusion rates\nM200 D0 ; disable volumetric E\nM220 S100 ; reset speed\n; Set initial warmup temps\nM117 Nozzle preheat\nM104 S100 ; preheat extruder to no ooze temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S40 P10 ; Bip\n; Home\nM117 Homing\nG28 ; home all with default mesh bed level\n; For ABL users put G29 for a leveling request\n; Final warmup routine\nM117 Final warmup\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S440 P200     ; 1st beep for printer ready and allow some time to clean nozzle\nM300 S0 P250       ; wait between dual beep\nM300 S440 P200     ; 2nd beep for printer ready\nG4 S10             ; wait to clean the nozzle\nM300 S440 P200     ; 3rd beep for ready to start printing\n; Prime line routine\nM117 Printing prime line\n;M900 K0; Disable Linear Advance (Marlin) for prime line\nG92 E0.0; reset extrusion distance\nG1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area\nG92 E0.0; reset extrusion distance\nG1 E2 F1000 ; de-retract and push ooze\nG3 X38.904 Y-102.668 I54.672 J95.105 E20.999\nG3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y-96.185 F1000 ; wipe\nG1 X50.985 Y-97.231 F1000 ; wipe\nG1 X49.018 Y-98.238 F1000 ; wipe\nG1 X0 Y-109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\n; Final print adjustments\nM117 Preparing to print\n;M82 ; extruder absolute mode\nM221 S{if layer_height<0.075}100{else}95{endif}\nM300 S40 P10 ; chirp\nM117 Print
+thumbnails = 16x16,260x260
+use_relative_e_distances = 1
+use_volumetric_e = 0
+

profile_sources/non-prusa-fff/FLSun/printer/_common_flsunq_.ini

@@ -0,0 +1,42 @@
+[printer:*common_flsunq*]
+printer_technology = FFF
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 40
+end_gcode =
+extruder_colour = ""
+extruder_offset = 0x0
+gcode_flavor = marlin
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0.32
+min_layer_height = 0.08
+nozzle_diameter = 0.4
+printer_notes = 
+printer_settings_id = 
+remaining_times = 0
+retract_before_travel = 2
+retract_before_wipe = 70%
+retract_layer_change = 0
+retract_length = 0
+retract_length_toolchange = 1
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = 
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+extruder_clearance_height = 45
+extruder_clearance_radius = 45
+default_print_profile = 0.20mm QUALITY @FLSUN
+default_filament_profile = Generic PLA @FLSUN
+

profile_sources/non-prusa-fff/FLSun/printer_model/Q5.ini

@@ -0,0 +1,14 @@
+[printer_model:Q5]
+name = FLSun Q5
+variants = 0.4; 0.6
+technology = FFF
+bed_model = Q5_bed.stl
+bed_texture = Q5.svg
+default_materials = Generic PLA @FLSUN; Generic PETG @FLSUN; Generic ABS @FLSUN; Generic SPLA @FLSUN; Generic FLEX @FLSUN
+
+#########################################
+###### begin Common print presets #######
+#########################################
+
+# Common print preset
+thumbnail = Q5_thumbnail.png

profile_sources/non-prusa-fff/FLSun/printer_model/QQSP.ini

@@ -0,0 +1,9 @@
+[printer_model:QQSP]
+name = FLSun QQS Pro
+variants = 0.4; 0.6
+technology = FFF
+bed_model = QQSP_bed.stl
+bed_texture = QQSP.svg
+default_materials = Generic PLA @FLSUN; Generic PETG @FLSUN; Generic ABS @FLSUN; Generic SPLA @FLSUN; Generic FLEX @FLSUN
+
+thumbnail = QQSP_thumbnail.png

profile_sources/non-prusa-fff/FLSun/vendor.idx

@@ -0,0 +1,8 @@
+min_slic3r_version = 2.9.1-alpha0
+1.1.0 Extruder clearance moved to printer settings.
+min_slic3r_version = 2.8.0-alpha0
+1.0.0 Updated for PS2.8.0.
+max_slic3r_version = 2.7.9
+min_slic3r_version = 2.3.0-rc2
+0.0.2 Updated start g-code for QQ Pro.
+0.0.1 Initial Version

profile_sources/non-prusa-fff/FLSun/vendor/vendor.ini

@@ -0,0 +1,15 @@
+[vendor]
+repo_id = non-prusa-fff
+# Vendor name will be shown by the Config Wizard.
+name = FLSun
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 1.1.0
+# Where to get the updates from?
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/FLSun/
+# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+