Initial Profile Sources

profile_sources/non-prusa-fff/FLSun/filament/Generic ABS @FLSUN.ini

@@ -0,0 +1,4 @@
+[filament:Generic ABS @FLSUN]
+inherits = *ABS_flsunq*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/FLSun/filament/Generic FLEX @FLSUN.ini

@@ -0,0 +1,4 @@
+[filament:Generic FLEX @FLSUN]
+inherits = *FLEX_flsunq*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/FLSun/filament/Generic PETG @FLSUN.ini

@@ -0,0 +1,4 @@
+[filament:Generic PETG @FLSUN]
+inherits = *PET_flsunq*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/FLSun/filament/Generic PLA @FLSUN.ini

@@ -0,0 +1,4 @@
+[filament:Generic PLA @FLSUN]
+inherits = *PLA_flsunq*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/FLSun/filament/Generic PLA VASE @FLSUN.ini

@@ -0,0 +1,4 @@
+[filament:Generic PLA VASE @FLSUN]
+inherits = *PLA_VASE_flsunq*
+filament_vendor = Generic
+

profile_sources/non-prusa-fff/FLSun/filament/Generic SPLA @FLSUN.ini

@@ -0,0 +1,13 @@
+[filament:Generic SPLA @FLSUN]
+inherits = *SPLA_flsunq*
+filament_vendor = Generic
+
+#########################################
+######### end filament presets ##########
+#########################################
+
+#########################################
+######### begin printer presets #########
+#########################################
+
+# Common printer preset

profile_sources/non-prusa-fff/FLSun/filament/_ABS_flsunq_.ini

@@ -0,0 +1,25 @@
+[filament:*ABS_flsunq*]
+inherits = *common_flsunq*
+bed_temperature = 90
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_density = 1.04
+filament_deretract_speed = nil
+filament_retract_length = 5
+filament_retract_lift = nil
+filament_retract_speed = 50
+filament_max_volumetric_speed = 10
+filament_type = ABS
+filament_wipe = nil                   
+first_layer_bed_temperature = 90
+first_layer_temperature = 245
+max_fan_speed = 0
+min_fan_speed = 0
+slowdown_below_layer_time = 20
+temperature = 245
+top_fan_speed = 0
+

profile_sources/non-prusa-fff/FLSun/filament/_FLEX_flsunq_.ini

@@ -0,0 +1,25 @@
+[filament:*FLEX_flsunq*]
+inherits = *common_flsunq*
+bed_temperature = 50
+bridge_fan_speed = 80
+compatible_printers_condition = nozzle_diameter[0]>0.35
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1.15
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #0000FF
+filament_density = 1.22
+filament_deretract_speed = 25
+filament_max_volumetric_speed = 1.35
+filament_retract_length = 0.8
+filament_retract_lift = nil
+filament_retract_speed = nil
+filament_type = FLEX
+filament_wipe = 0
+first_layer_bed_temperature = 50
+first_layer_temperature = 240
+slowdown_below_layer_time = 10
+start_filament_gcode = "; Filament gcode\n;M900 K0; Disable Linear Advance 1.5\n"
+temperature = 240
+

profile_sources/non-prusa-fff/FLSun/filament/_PET_flsunq_.ini

@@ -0,0 +1,23 @@
+[filament:*PET_flsunq*]
+inherits = *common_flsunq*
+bed_temperature = 80
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FFFFFF
+filament_density = 1.27
+filament_deretract_speed = 25
+filament_max_volumetric_speed = 8
+filament_retract_length = 4
+filament_retract_lift = 0.2
+filament_retract_speed = 45
+filament_type = PETG
+filament_wipe = 1
+first_layer_bed_temperature =80
+first_layer_temperature = 240
+max_fan_speed = 50
+min_fan_speed = 20
+temperature = 230
+

profile_sources/non-prusa-fff/FLSun/filament/_PLA_VASE_flsunq_.ini

@@ -0,0 +1,10 @@
+[filament:*PLA_VASE_flsunq*]
+inherits = *PLA_flsunq*
+bridge_fan_speed = 100
+disable_fan_first_layers = 3
+fan_below_layer_time = 60
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+slowdown_below_layer_time = 5
+

profile_sources/non-prusa-fff/FLSun/filament/_PLA_flsunq_.ini

@@ -0,0 +1,23 @@
+[filament:*PLA_flsunq*]
+inherits = *common_flsunq*
+bed_temperature = 60
+bridge_fan_speed = 95
+cooling = 1
+disable_fan_first_layers = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_density = 1.24
+filament_deretract_speed = 30
+filament_retract_length = 3
+filament_retract_lift = nil
+filament_retract_speed = 30
+filament_max_volumetric_speed = 10
+filament_type = PLA 
+filament_wipe = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 205
+max_fan_speed = 90
+min_fan_speed = 50
+temperature = 200
+

profile_sources/non-prusa-fff/FLSun/filament/_SPLA_flsunq_.ini

@@ -0,0 +1,23 @@
+[filament:*SPLA_flsunq*]
+inherits = *common_flsunq*
+bed_temperature = 80
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #008000
+filament_density = 1.24
+filament_deretract_speed = 70
+filament_max_volumetric_speed = 8
+filament_retract_length = 7.5
+filament_retract_lift = nil
+filament_retract_speed = 70
+filament_type = PLA
+filament_wipe = nil
+first_layer_bed_temperature = 80
+first_layer_temperature = 230
+max_fan_speed = 70
+min_fan_speed = 50
+temperature = 215
+

profile_sources/non-prusa-fff/FLSun/filament/_common_flsunq_.ini

@@ -0,0 +1,17 @@
+[filament:*common_flsunq*]
+cooling = 0
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_fan_speed = 20
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = "; Filament gcode\n;M900 K{if nozzle_diameter[0]==0.6}0.12{else}0.22{endif} ; Linear Advance 1.5\n"
+