mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-10-01 10:37:17 +00:00
Initial Profile Sources
This commit is contained in:
Dark98
@@ -0,0 +1,23 @@
|
||||
[print:0.08mm DETAIL @FLSUN]
|
||||
inherits = *0.08mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
bridge_acceleration = 200
|
||||
bridge_speed = 20
|
||||
external_perimeter_speed = 70%
|
||||
first_layer_acceleration = 500
|
||||
first_layer_speed = 40%
|
||||
gap_fill_speed = 20
|
||||
infill_acceleration = 800
|
||||
infill_speed = 40
|
||||
max_print_speed = 80
|
||||
perimeter_acceleration = 300
|
||||
perimeter_speed = 30
|
||||
small_perimeter_speed = 70%
|
||||
solid_infill_speed = 95%
|
||||
support_material_speed = 40
|
||||
top_solid_infill_speed = 60%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.15mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
@@ -0,0 +1,11 @@
|
||||
[print:0.15mm VASE @FLSUN]
|
||||
inherits = *0.15mm_vase_flsunq*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
bottom_solid_layers = 5
|
||||
external_perimeter_speed = 50%
|
||||
gap_fill_speed = 40
|
||||
infill_speed = 100
|
||||
perimeter_speed = 80
|
||||
small_perimeter_speed = 25%
|
||||
solid_infill_speed = 33%
|
||||
|
||||
@@ -0,0 +1,16 @@
|
||||
[print:0.15mm VASE SPEED @FLSUN]
|
||||
inherits = *0.15mm_vase_flsunq*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
bridge_speed = 80
|
||||
bottom_solid_layers = 3
|
||||
external_perimeter_speed = 60%
|
||||
gap_fill_speed = 30
|
||||
infill_speed = 80
|
||||
perimeter_speed = 90
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_speed = 80%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.16mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
@@ -0,0 +1,17 @@
|
||||
[print:0.16mm DETAIL @0.6 nozzle FLSUN]
|
||||
inherits = *0.16mm_flsunq*; *0.6nozzleFLSUN*
|
||||
# alias = 0.16mm DETAIL
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
|
||||
external_perimeter_speed = 35
|
||||
infill_speed = 70
|
||||
max_print_speed = 80
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 45
|
||||
infill_extrusion_width = 0.65
|
||||
solid_infill_extrusion_width = 0.65
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.20mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
@@ -0,0 +1,13 @@
|
||||
[print:0.16mm QUALITY @FLSUN]
|
||||
inherits = *0.16mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50%
|
||||
fill_density = 15%
|
||||
fill_pattern = gyroid
|
||||
infill_speed = 80
|
||||
ironing = 0
|
||||
perimeter_speed = 90
|
||||
small_perimeter_speed = 25%
|
||||
solid_infill_speed = 50%
|
||||
top_solid_infill_speed = 30%
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
[print:0.16mm SPEED @FLSUN]
|
||||
inherits = *0.16mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50%
|
||||
infill_speed = 120
|
||||
perimeter_speed = 60
|
||||
small_perimeter_speed = 25%
|
||||
solid_infill_speed = 85%
|
||||
top_solid_infill_speed = 30%
|
||||
|
||||
@@ -0,0 +1,13 @@
|
||||
[print:0.20mm DETAIL @0.6 nozzle FLSUN]
|
||||
inherits = *0.20mm_flsunq*; *0.6nozzleFLSUN*
|
||||
# alias = 0.20mm DETAIL
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
|
||||
external_perimeter_speed = 35
|
||||
infill_speed = 70
|
||||
max_print_speed = 80
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 45
|
||||
infill_extrusion_width = 0.65
|
||||
solid_infill_extrusion_width = 0.65
|
||||
|
||||
@@ -0,0 +1,17 @@
|
||||
[print:0.20mm QUALITY @FLSUN]
|
||||
inherits = *0.20mm_flsunq*; *QQSP*
|
||||
avoid_crossing_perimeters = 1
|
||||
bridge_speed = 60
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50%
|
||||
fill_density = 15%
|
||||
gap_fill_speed = 30
|
||||
infill_speed = 80
|
||||
ironing = 0
|
||||
ironing_speed = 20
|
||||
perimeter_speed = 50
|
||||
small_perimeter_speed = 85%
|
||||
solid_infill_speed = 90%
|
||||
thin_walls = 0
|
||||
top_solid_infill_speed = 50%
|
||||
|
||||
@@ -0,0 +1,16 @@
|
||||
[print:0.20mm SPEED @FLSUN]
|
||||
inherits = *0.20mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50
|
||||
extra_perimeters = 1
|
||||
first_layer_speed = 35
|
||||
infill_speed = 90
|
||||
perimeter_speed = 60
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_speed = 85%
|
||||
top_solid_infill_speed = 40%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.24mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
@@ -0,0 +1,15 @@
|
||||
[print:0.24mm DRAFT @FLSUN]
|
||||
inherits = *0.24mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50%
|
||||
first_layer_speed = 20%
|
||||
infill_speed = 120
|
||||
perimeter_speed = 60
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_speed = 95%
|
||||
top_solid_infill_speed = 50%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.30mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
@@ -0,0 +1,13 @@
|
||||
[print:0.30mm QUALITY @0.6 nozzle FLSUN]
|
||||
inherits = *0.30mm_flsunq*; *0.6nozzleFLSUN*
|
||||
# alias = 0.30mm QUALITY
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
|
||||
external_perimeter_speed = 35
|
||||
infill_speed = 90
|
||||
max_print_speed = 100
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 65
|
||||
top_solid_infill_speed = 45
|
||||
external_perimeter_extrusion_width = 0.68
|
||||
perimeter_extrusion_width = 0.68
|
||||
|
||||
@@ -0,0 +1,15 @@
|
||||
[print:0.30mm SPEED @FLSUN]
|
||||
inherits = *0.30mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50%
|
||||
first_layer_speed = 20%
|
||||
infill_speed = 120
|
||||
perimeter_speed = 80
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_speed = 85%
|
||||
top_solid_infill_speed = 50%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.35mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
@@ -0,0 +1,17 @@
|
||||
[print:0.35mm SPEED @0.6 nozzle FLSUN]
|
||||
inherits = *0.35mm_flsunq*; *0.6nozzleFLSUN*
|
||||
# alias = 0.35mm SPEED
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
|
||||
external_perimeter_speed = 45
|
||||
infill_speed = 100
|
||||
max_print_speed = 120
|
||||
perimeter_speed = 65
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 45
|
||||
external_perimeter_extrusion_width = 0.68
|
||||
perimeter_extrusion_width = 0.68
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.40mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
@@ -0,0 +1,24 @@
|
||||
[print:0.40mm DRAFT @0.6 nozzle FLSUN]
|
||||
inherits = *0.40mm_flsunq*; *0.6nozzleFLSUN*
|
||||
# alias = 0.40mm DRAFT
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
|
||||
external_perimeter_speed = 60
|
||||
infill_speed = 100
|
||||
max_print_speed = 120
|
||||
perimeter_speed = 60
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 60
|
||||
external_perimeter_extrusion_width = 0.68
|
||||
perimeter_extrusion_width = 0.68
|
||||
infill_extrusion_width = 0.68
|
||||
solid_infill_extrusion_width = 0.68
|
||||
|
||||
#########################################
|
||||
########### end print presets ###########
|
||||
#########################################
|
||||
|
||||
#########################################
|
||||
######## begin filament presets #########
|
||||
#########################################
|
||||
|
||||
# Common filament preset
|
||||
@@ -0,0 +1,9 @@
|
||||
[print:*0.08mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 10
|
||||
bridge_flow_ratio = 0.7
|
||||
layer_height = 0.08
|
||||
support_material_contact_distance = 0.06
|
||||
support_material_spacing = 1.5
|
||||
top_solid_layers = 12
|
||||
|
||||
@@ -0,0 +1,34 @@
|
||||
[print:*0.15mm_vase_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
avoid_crossing_perimeters = 1
|
||||
bottom_solid_min_thickness = 0.5
|
||||
bridge_flow_ratio = 0.9
|
||||
elefant_foot_compensation = 0.15
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.9
|
||||
extra_perimeters = 1
|
||||
extrusion_width = 0.9
|
||||
first_layer_acceleration = 1000
|
||||
first_layer_height = 0.3
|
||||
first_layer_extrusion_width = 0.9
|
||||
first_layer_speed = 20
|
||||
fill_density = 0%
|
||||
infill_extrusion_width = 0.9
|
||||
ironing = 0
|
||||
layer_height = 0.15
|
||||
min_skirt_length = 4
|
||||
max_print_speed = 100
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
perimeters = 1
|
||||
perimeter_extrusion_width = 0.9
|
||||
seam_position = aligned
|
||||
slice_closing_radius = 0.049
|
||||
solid_infill_extrusion_width = 0.6
|
||||
spiral_vase = 1
|
||||
support_material = 0
|
||||
top_solid_infill_speed = 40%
|
||||
top_solid_min_thickness = 0.6
|
||||
thin_walls = 0
|
||||
top_fill_pattern = rectilinear
|
||||
top_solid_layers = 0
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[print:*0.16mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 5
|
||||
bridge_flow_ratio = 0.9
|
||||
layer_height = 0.16
|
||||
support_material_contact_distance = 0.12
|
||||
top_solid_layers = 6
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[print:*0.20mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 4
|
||||
bridge_flow_ratio = 0.95
|
||||
layer_height = 0.20
|
||||
support_material_contact_distance = 0.2
|
||||
top_solid_layers = 5
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[print:*0.24mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 4
|
||||
bridge_flow_ratio = 0.95
|
||||
layer_height = 0.24
|
||||
support_material_contact_distance = 0.18
|
||||
top_solid_layers = 4
|
||||
|
||||
@@ -0,0 +1,14 @@
|
||||
[print:*0.30mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 3
|
||||
bridge_flow_ratio = 0.95
|
||||
external_perimeter_extrusion_width = 0.6
|
||||
extrusion_width = 0.5
|
||||
infill_extrusion_width = 0.5
|
||||
layer_height = 0.30
|
||||
perimeter_extrusion_width = 0.5
|
||||
solid_infill_extrusion_width = 0.5
|
||||
support_material_contact_distance = 0.22
|
||||
top_infill_extrusion_width = 0.45
|
||||
top_solid_layers = 4
|
||||
|
||||
@@ -0,0 +1,13 @@
|
||||
[print:*0.35mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 3
|
||||
external_perimeter_extrusion_width = 0.6
|
||||
external_perimeter_speed = 40
|
||||
first_layer_extrusion_width = 0.75
|
||||
layer_height = 0.35
|
||||
perimeter_extrusion_width = 0.65
|
||||
solid_infill_extrusion_width = 0.65
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 50
|
||||
top_solid_layers = 4
|
||||
|
||||
@@ -0,0 +1,17 @@
|
||||
[print:*0.40mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 3
|
||||
external_perimeter_extrusion_width = 0.6
|
||||
external_perimeter_speed = 40
|
||||
first_layer_extrusion_width = 0.65
|
||||
infill_acceleration = 2000
|
||||
infill_speed = 60
|
||||
layer_height = 0.4
|
||||
perimeter_acceleration = 800
|
||||
perimeter_extrusion_width = 0.65
|
||||
perimeter_speed = 50
|
||||
solid_infill_extrusion_width = 0.65
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_layers = 4
|
||||
|
||||
@@ -0,0 +1,29 @@
|
||||
[print:*0.6nozzleFLSUN*]
|
||||
bridge_acceleration = 1000
|
||||
bridge_flow_ratio = 0.95
|
||||
bridge_speed = 25
|
||||
default_acceleration = 1000
|
||||
external_perimeter_extrusion_width = 0.65
|
||||
extrusion_width = 0.65
|
||||
first_layer_acceleration = 1000
|
||||
first_layer_extrusion_width = 0.65
|
||||
fill_density = 15%
|
||||
fill_pattern = gyroid
|
||||
infill_acceleration = 1000
|
||||
infill_extrusion_width = 0.68
|
||||
perimeter_acceleration = 800
|
||||
perimeter_extrusion_width = 0.65
|
||||
solid_infill_extrusion_width = 0.68
|
||||
support_material_speed = 40
|
||||
support_material_contact_distance = 0.15
|
||||
support_material_extrusion_width = 0.55
|
||||
support_material_xy_spacing = 80%
|
||||
top_infill_extrusion_width = 0.6
|
||||
travel_speed = 150
|
||||
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{print_time}.gco
|
||||
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.08mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
[print:*Q5*]
|
||||
bridge_acceleration = 1000
|
||||
default_acceleration = 800
|
||||
first_layer_acceleration = 800
|
||||
infill_acceleration = 1000
|
||||
max_print_speed = 150
|
||||
perimeter_acceleration = 800
|
||||
|
||||
# Print parameters common to a 0.6mm diameter nozzle.
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
[print:*QQSP*]
|
||||
bridge_acceleration = 1000
|
||||
default_acceleration = 1500
|
||||
first_layer_acceleration = 1000
|
||||
infill_acceleration = 800
|
||||
max_print_speed = 200
|
||||
perimeter_acceleration = 800
|
||||
|
||||
## Q5
|
||||
|
||||
@@ -0,0 +1,109 @@
|
||||
[print:*common_flsunq*]
|
||||
avoid_crossing_perimeters = 1
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
bottom_solid_min_thickness = 0.5
|
||||
bridge_acceleration = 800
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.8
|
||||
bridge_speed = 30
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
complete_objects = 0
|
||||
default_acceleration = 800
|
||||
dont_support_bridges = 1
|
||||
elefant_foot_compensation = 0.2
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_fill_pattern = rectilinear
|
||||
external_perimeters_first = 0
|
||||
external_perimeter_extrusion_width = 0.45
|
||||
extra_perimeters = 0
|
||||
extrusion_width = 0.45
|
||||
fill_angle = 45
|
||||
fill_density = 15%
|
||||
fill_pattern = gyroid
|
||||
first_layer_acceleration = 800
|
||||
first_layer_extrusion_width = 0.42
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 40
|
||||
gcode_comments = 0
|
||||
infill_acceleration = 800
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.45
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
interface_shells = 0
|
||||
ironing = 0
|
||||
ironing_flowrate = 15%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 15
|
||||
ironing_type = top
|
||||
max_print_speed = 200
|
||||
max_volumetric_extrusion_rate_slope_negative = 0
|
||||
max_volumetric_extrusion_rate_slope_positive = 0
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 4
|
||||
notes =
|
||||
overhangs = 1
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gco
|
||||
perimeters = 3
|
||||
perimeter_acceleration = 800
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.45
|
||||
perimeter_speed = 45
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = nearest
|
||||
single_extruder_multi_material_priming = 0
|
||||
skirts = 2
|
||||
skirt_distance = 5
|
||||
skirt_height = 1
|
||||
small_perimeter_speed = 25
|
||||
solid_infill_below_area = 0
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.45
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 1
|
||||
support_material_auto = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.38
|
||||
support_material_interface_extruder = 0
|
||||
support_material_angle = 0
|
||||
support_material_buildplate_only = 0
|
||||
support_material_enforce_layers = 0
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_layers = 2
|
||||
support_material_interface_spacing = 0.2
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2.5
|
||||
support_material_speed = 60
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 45
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 60%
|
||||
thin_walls = 0
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_min_thickness = 0.6
|
||||
travel_speed = 150
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 170
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
||||
## QQS
|
||||
|
||||
Reference in New Issue
Block a user