Initial Profile Sources

profile_sources/non-prusa-fff/HartSmartProducts/filament/3D Fuel Pro PCTG @HSP1 0.4 Takoto.ini

@@ -0,0 +1,14 @@
+[filament:3D Fuel Pro PCTG @HSP1 0.4 Takoto]
+inherits = *3D Fuel PCTG*; *0.4 Takoto*
+temperature = 240
+bed_temperature = 80
+first_layer_temperature = 240
+first_layer_bed_temperature = 80
+extrusion_multiplier = 0.96
+filament_max_volumetric_speed = 12
+min_fan_speed = 40
+max_fan_speed = 40
+bridge_fan_speed = 40
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.04}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+################### 3D Fuel 0.6 presets ####################

profile_sources/non-prusa-fff/HartSmartProducts/filament/3D Fuel Pro PCTG @HSP1 0.6 Takoto.ini

@@ -0,0 +1,14 @@
+[filament:3D Fuel Pro PCTG @HSP1 0.6 Takoto]
+inherits = *3D Fuel PCTG*; *0.6 Takoto*
+temperature = 240
+bed_temperature = 80
+first_layer_temperature = 245
+first_layer_bed_temperature = 80
+extrusion_multiplier = 0.96
+filament_max_volumetric_speed = 12
+min_fan_speed = 40
+max_fan_speed = 40
+bridge_fan_speed = 40
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.0}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+################### 3D Fuel 0.8 presets ####################

profile_sources/non-prusa-fff/HartSmartProducts/filament/3D Fuel Pro PCTG @HSP1 0.8 Takoto.ini

@@ -0,0 +1,14 @@
+[filament:3D Fuel Pro PCTG @HSP1 0.8 Takoto]
+inherits = *3D Fuel PCTG*; *0.8 Takoto*
+temperature = 240
+bed_temperature = 80
+first_layer_temperature = 245
+first_layer_bed_temperature = 80
+extrusion_multiplier = 0.96
+filament_max_volumetric_speed = 12
+min_fan_speed = 40
+max_fan_speed = 40
+bridge_fan_speed = 40
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.0}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+################### Polymaker 0.6 presets ####################

profile_sources/non-prusa-fff/HartSmartProducts/filament/BASF Ultrafuse ABS Fusion+ @HSP1.ini

@@ -0,0 +1,13 @@
+[filament:BASF Ultrafuse ABS Fusion+ @HSP1]
+inherits = *ABS*; *BASF*
+temperature = 255
+bed_temperature = 100
+first_layer_temperature = 250
+first_layer_bed_temperature = 100
+filament_cost = 45.00
+filament_density = 1.07
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.95
+filament_notes = BASF Ultrafuse ABS Fusion+
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/BASF Ultrafuse BVOH @HSP1.ini

@@ -0,0 +1,12 @@
+[filament:BASF Ultrafuse BVOH @HSP1]
+inherits = *BVOH*; *BASF*
+temperature = 215
+first_layer_temperature = 210
+filament_cost = 143.00
+filament_density = 1.14
+filament_max_volumetric_speed = 10
+extrusion_multiplier = 0.91
+filament_notes = BASF Ultrafuse BVOH
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+##################### Jabil 0.6 presets ######################

profile_sources/non-prusa-fff/HartSmartProducts/filament/Essentium HTN-CF25 @HSP1 0.6 Takoto.ini

@@ -0,0 +1,20 @@
+[filament:Essentium HTN-CF25 @HSP1 0.6 Takoto]
+inherits = *Essentium HTN-CF25*; *0.6 Takoto*
+temperature = 280
+bed_temperature = 80
+first_layer_temperature = 275
+first_layer_bed_temperature = 80
+filament_max_volumetric_speed = 12
+extrusion_multiplier = 0.95
+fan_always_on = 0
+cooling = 0
+min_fan_speed = 0
+max_fan_speed = 0
+enable_dynamic_fan_speeds = 1
+overhang_fan_speed_0 = 30
+overhang_fan_speed_1 = 25
+overhang_fan_speed_2 = 15
+overhang_fan_speed_3 = 10
+filament_abrasive = 1
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.006}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Essentium Support S10 @HSP1 0.6 Takoto.ini

@@ -0,0 +1,9 @@
+[filament:Essentium Support S10 @HSP1 0.6 Takoto]
+inherits = *Essentium Support S10*; *0.6 Takoto*
+temperature = 215
+first_layer_temperature = 210
+filament_max_volumetric_speed = 10
+extrusion_multiplier = 0.90
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.04}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+###################### BASF 0.6 presets ######################

profile_sources/non-prusa-fff/HartSmartProducts/filament/Generic ABS @HSP1.ini

@@ -0,0 +1,4 @@
+[filament:Generic ABS @HSP1]
+inherits = *ABS*; *Generic*
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Generic ASA @HSP1.ini

@@ -0,0 +1,5 @@
+[filament:Generic ASA @HSP1]
+inherits = *ASA*; *Generic*
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+################### Layer Line 0.4 presets ###################

profile_sources/non-prusa-fff/HartSmartProducts/filament/Generic PETG @HSP1.ini

@@ -0,0 +1,4 @@
+[filament:Generic PETG @HSP1]
+inherits = *PETG*; *Generic*
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Generic PLA @HSP1.ini

@@ -0,0 +1,4 @@
+[filament:Generic PLA @HSP1]
+inherits = *PLA*; *Generic*
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.026}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Jabil PETG 0800 ESD @HSP1.ini

@@ -0,0 +1,14 @@
+[filament:Jabil PETG 0800 ESD @HSP1]
+inherits = *PETG*; *Jabil*
+temperature = 265
+bed_temperature = 80
+first_layer_temperature = 260
+first_layer_bed_temperature = 80
+filament_cost = 100
+filament_density = 1.26
+filament_max_volumetric_speed = 12
+extrusion_multiplier = 0.96
+filament_abrasive = 1
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.01}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.018}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+################### Common printer presets ###################

profile_sources/non-prusa-fff/HartSmartProducts/filament/Layer Line DuraPET @HSP1 0.4 Takoto.ini

@@ -0,0 +1,14 @@
+[filament:Layer Line DuraPET @HSP1 0.4 Takoto]
+inherits = *Layer Line DuraPET*; *0.4 Takoto*
+temperature = 285
+bed_temperature = 80
+first_layer_temperature = 280
+first_layer_bed_temperature = 80
+extrusion_multiplier = 1.00
+filament_max_volumetric_speed = 12
+min_fan_speed = 80  
+max_fan_speed = 80
+bridge_fan_speed = 80
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.0}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+################### Layer Line 0.6 presets ###################

profile_sources/non-prusa-fff/HartSmartProducts/filament/Layer Line DuraPET @HSP1 0.6 Takoto.ini

@@ -0,0 +1,14 @@
+[filament:Layer Line DuraPET @HSP1 0.6 Takoto]
+inherits = *Layer Line DuraPET*; *0.6 Takoto*
+temperature = 285
+bed_temperature = 80
+first_layer_temperature = 280
+first_layer_bed_temperature = 80
+extrusion_multiplier = 1.00
+filament_max_volumetric_speed = 15
+min_fan_speed = 80  
+max_fan_speed = 80
+bridge_fan_speed = 80
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.012}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+################### Layer Line 0.8 presets ###################

profile_sources/non-prusa-fff/HartSmartProducts/filament/Layer Line DuraPET @HSP1 0.8 Takoto.ini

@@ -0,0 +1,14 @@
+[filament:Layer Line DuraPET @HSP1 0.8 Takoto]
+inherits = *Layer Line DuraPET*; *0.8 Takoto*
+temperature = 285
+bed_temperature = 80
+first_layer_temperature = 280
+first_layer_bed_temperature = 80
+extrusion_multiplier = 1.00
+filament_max_volumetric_speed = 20
+min_fan_speed = 80  
+max_fan_speed = 80
+bridge_fan_speed = 80
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.0}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+################### Layer Line 1.0 presets ###################

profile_sources/non-prusa-fff/HartSmartProducts/filament/Layer Line DuraPET @HSP1 1.0 Takoto.ini

@@ -0,0 +1,14 @@
+[filament:Layer Line DuraPET @HSP1 1.0 Takoto]
+inherits = *Layer Line DuraPET*; *1.0 Takoto*
+temperature = 285
+bed_temperature = 80
+first_layer_temperature = 280
+first_layer_bed_temperature = 80
+extrusion_multiplier = 1.00
+filament_max_volumetric_speed = 25
+min_fan_speed = 80  
+max_fan_speed = 80
+bridge_fan_speed = 80
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.0}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+################## Push Plastic 0.4 presets ##################

profile_sources/non-prusa-fff/HartSmartProducts/filament/Layer Line Engineering PLA @HSP1 0.4 Takoto.ini

@@ -0,0 +1,12 @@
+[filament:Layer Line Engineering PLA @HSP1 0.4 Takoto]
+inherits = *Layer Line Engineering PLA*; *0.4 Takoto*
+temperature = 215
+bed_temperature = 60
+first_layer_temperature = 210
+first_layer_bed_temperature = 60
+filament_max_volumetric_speed = 15
+min_fan_speed = 70   
+max_fan_speed = 70
+bridge_fan_speed = 70
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.03}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Layer Line Engineering PLA @HSP1 0.6 Takoto.ini

@@ -0,0 +1,12 @@
+[filament:Layer Line Engineering PLA @HSP1 0.6 Takoto]
+inherits = *Layer Line Engineering PLA*; *0.6 Takoto*
+temperature = 215
+bed_temperature = 60
+first_layer_temperature = 210
+first_layer_bed_temperature = 60
+filament_max_volumetric_speed = 15
+min_fan_speed = 80  
+max_fan_speed = 80
+bridge_fan_speed = 80
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.024}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Layer Line Engineering PLA @HSP1 0.8 Takoto.ini

@@ -0,0 +1,16 @@
+[filament:Layer Line Engineering PLA @HSP1 0.8 Takoto]
+inherits = *Layer Line Engineering PLA*; *0.8 Takoto*
+temperature = 215
+bed_temperature = 60
+first_layer_temperature = 210
+first_layer_bed_temperature = 60
+filament_max_volumetric_speed = 15
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 15
+max_fan_speed = 40
+bridge_fan_speed = 40
+disable_fan_first_layers = 1
+fan_below_layer_time = 60
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.0}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Layer Line Engineering PLA @HSP1 1.0 Takoto.ini

@@ -0,0 +1,12 @@
+[filament:Layer Line Engineering PLA @HSP1 1.0 Takoto]
+inherits = *Layer Line Engineering PLA*; *1.0 Takoto*
+temperature = 230
+bed_temperature = 60
+first_layer_temperature = 225
+first_layer_bed_temperature = 60
+filament_max_volumetric_speed = 25
+min_fan_speed = 80  
+max_fan_speed = 80
+bridge_fan_speed = 80
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.012}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Polymaker PolyDissolve S1 @HSP1.ini

@@ -0,0 +1,13 @@
+[filament:Polymaker PolyDissolve S1 @HSP1]
+inherits = *PVA*; *Polymaker*
+temperature = 220
+first_layer_temperature = 215
+filament_cost = 79.99
+filament_density = 1.13
+filament_max_volumetric_speed = 10
+extrusion_multiplier = 0.90
+filament_notes = Polymaker PolyDissolve S1
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.018}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\nM98 P{\"{directories.system^\\\"/System Macros/Change Settings/adjust_filament_monitor_sensitivity.g\\\"}\"} D{current_extruder} L60 H140\n{endif}"
+
+
+################### Essentium 0.6 presets ####################

profile_sources/non-prusa-fff/HartSmartProducts/filament/Polymaker PolyFlex TPU95-HF @HSP1 0.6 Takoto.ini

@@ -0,0 +1,13 @@
+[filament:Polymaker PolyFlex TPU95-HF @HSP1 0.6 Takoto]
+inherits = *Polymaker PolyFlex TPU95-HF*; *0.6 Takoto*
+temperature = 220
+bed_temperature = 50
+first_layer_temperature = 220
+first_layer_bed_temperature = 50
+filament_max_volumetric_speed = 10
+extrusion_multiplier = 0.96
+min_fan_speed = 50
+max_fan_speed = 50
+bridge_fan_speed = 50
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.030}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\nM98 P{\"{directories.system^\\\"/System Macros/Change Settings/adjust_filament_monitor_sensitivity.g\\\"}\"} D0 L65 H120\nM98 P{\"{directories.system^\\\"/System Macros/Change Settings/adjust_filament_monitor_sensitivity.g\\\"}\"} D1 L65 H120\n{else}\nM572 D{current_extruder} S{pressure_advance}\nM98 P{\"{directories.system^\\\"/System Macros/Change Settings/adjust_filament_monitor_sensitivity.g\\\"}\"} D{current_extruder} L65 H120\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Polymaker PolyLite PLA-CF @HSP1.ini

@@ -0,0 +1,14 @@
+[filament:Polymaker PolyLite PLA-CF @HSP1]
+inherits = *PLA*; *Polymaker*
+temperature = 205
+bed_temperature = 60
+first_layer_temperature = 200
+first_layer_bed_temperature = 60
+filament_cost = 29.99
+filament_density = 1.29
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.93
+filament_abrasive = 1
+filament_notes = Polymaker PolyLite PLA-CF
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.012}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Polymaker PolyMide PA6-CF @HSP1.ini

@@ -0,0 +1,19 @@
+[filament:Polymaker PolyMide PA6-CF @HSP1]
+inherits = *Nylon*; *Polymaker*
+temperature = 290
+bed_temperature = 50
+first_layer_temperature = 285
+first_layer_bed_temperature = 50
+filament_cost = 74.99
+filament_density = 1.17
+filament_max_volumetric_speed = 12
+extrusion_multiplier = 0.93
+enable_dynamic_fan_speeds = 1
+overhang_fan_speed_0 = 30
+overhang_fan_speed_1 = 25
+overhang_fan_speed_2 = 15
+overhang_fan_speed_3 = 10
+filament_abrasive = 1
+filament_notes = Polymaker PolyMide PA6-CF
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.016}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Push Plastic ABS @HSP1.ini

@@ -0,0 +1,12 @@
+[filament:Push Plastic ABS @HSP1]
+inherits = *ABS*; *Push Plastic*
+temperature = 250
+bed_temperature = 100
+first_layer_temperature = 240
+first_layer_bed_temperature = 100
+filament_cost = 29.99
+filament_density = 1.03
+filament_max_volumetric_speed = 15
+filament_notes = Push Plastic ABS
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.012}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.024}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Push Plastic PC @HSP1.ini

@@ -0,0 +1,12 @@
+[filament:Push Plastic PC @HSP1]
+inherits = *PC*; *Push Plastic*
+filament_spool_weight = 350
+temperature = 260
+bed_temperature = 100
+first_layer_temperature = 255
+first_layer_bed_temperature = 100
+filament_cost = 54.00
+filament_density = 1.19
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+################### 3D Fuel 0.4 presets ####################

profile_sources/non-prusa-fff/HartSmartProducts/filament/Push Plastic PCTG @HSP1.ini

@@ -0,0 +1,12 @@
+[filament:Push Plastic PCTG @HSP1]
+inherits = *PCTG*; *Push Plastic*
+temperature = 250
+bed_temperature = 80
+first_layer_temperature = 245
+first_layer_bed_temperature = 80
+filament_cost = 39.99
+filament_density = 1.21
+extrusion_multiplier = 1.00
+filament_notes = Push Plastic PCTG
+start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.018}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.026}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Push Plastic PETG @HSP1 0.4 Takoto.ini

@@ -0,0 +1,14 @@
+[filament:Push Plastic PETG @HSP1 0.4 Takoto]
+inherits = *Push Plastic PETG*; *0.4 Takoto*
+temperature = 245
+bed_temperature = 80
+first_layer_temperature = 240
+first_layer_bed_temperature = 80
+extrusion_multiplier = 0.94
+filament_max_volumetric_speed = 12
+min_fan_speed = 40  
+max_fan_speed = 40
+bridge_fan_speed = 40
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.042}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+################## Push Plastic 0.6 presets ##################

profile_sources/non-prusa-fff/HartSmartProducts/filament/Push Plastic PETG @HSP1 0.6 Takoto.ini

@@ -0,0 +1,14 @@
+[filament:Push Plastic PETG @HSP1 0.6 Takoto]
+inherits = *Push Plastic PETG*; *0.6 Takoto*
+temperature = 245
+bed_temperature = 80
+first_layer_temperature = 240
+first_layer_bed_temperature = 80
+extrusion_multiplier = 0.94
+filament_max_volumetric_speed = 12
+min_fan_speed = 80  
+max_fan_speed = 80
+bridge_fan_speed = 80
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.020}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+################## Push Plastic 0.8 presets ##################

profile_sources/non-prusa-fff/HartSmartProducts/filament/Push Plastic PETG @HSP1 0.8 Takoto.ini

@@ -0,0 +1,14 @@
+[filament:Push Plastic PETG @HSP1 0.8 Takoto]
+inherits = *Push Plastic PETG*; *0.8 Takoto*
+temperature = 245
+bed_temperature = 80
+first_layer_temperature = 240
+first_layer_bed_temperature = 80
+extrusion_multiplier = 0.94
+filament_max_volumetric_speed = 18
+min_fan_speed = 80
+max_fan_speed = 80
+bridge_fan_speed = 80
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.030}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+################## Push Plastic 1.0 presets ##################

profile_sources/non-prusa-fff/HartSmartProducts/filament/Push Plastic PETG @HSP1 1.0 Takoto.ini

@@ -0,0 +1,14 @@
+[filament:Push Plastic PETG @HSP1 1.0 Takoto]
+inherits = *Push Plastic PETG*; *1.0 Takoto*
+temperature = 250
+bed_temperature = 80
+first_layer_temperature = 245
+first_layer_bed_temperature = 80
+extrusion_multiplier = 0.94
+filament_max_volumetric_speed = 25
+min_fan_speed = 80
+max_fan_speed = 80
+bridge_fan_speed = 80
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.016}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+
+#################### Push Plastic presets ####################

profile_sources/non-prusa-fff/HartSmartProducts/filament/Push Plastic PLA @HSP1 0.4 Takoto.ini

@@ -0,0 +1,8 @@
+[filament:Push Plastic PLA @HSP1 0.4 Takoto]
+inherits = *Push Plastic PLA*; *0.4 Takoto*
+temperature = 200
+bed_temperature = 60
+first_layer_temperature = 195
+first_layer_bed_temperature = 60
+start_filament_gcode =  "; Filament gcode\n{local pressure_advance = 0.0}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Push Plastic PLA @HSP1 0.6 Takoto.ini

@@ -0,0 +1,8 @@
+[filament:Push Plastic PLA @HSP1 0.6 Takoto]
+inherits = *Push Plastic PLA*; *0.6 Takoto*
+temperature = 200
+bed_temperature = 60
+first_layer_temperature = 195
+first_layer_bed_temperature = 60
+start_filament_gcode =  "; Filament gcode\n{local pressure_advance = 0.026}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Push Plastic PLA @HSP1 0.8 Takoto.ini

@@ -0,0 +1,8 @@
+[filament:Push Plastic PLA @HSP1 0.8 Takoto]
+inherits = *Push Plastic PLA*; *0.8 Takoto*
+temperature = 200
+bed_temperature = 60
+first_layer_temperature = 195
+first_layer_bed_temperature = 60
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.0}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/Push Plastic PLA @HSP1 1.0 Takoto.ini

@@ -0,0 +1,8 @@
+[filament:Push Plastic PLA @HSP1 1.0 Takoto]
+inherits = *Push Plastic PLA*; *1.0 Takoto*
+temperature = 200
+bed_temperature = 60
+first_layer_temperature = 195
+first_layer_bed_temperature = 60
+start_filament_gcode = "; Filament gcode\n{local pressure_advance = 0.0}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_0.4 Takoto_.ini

@@ -0,0 +1,3 @@
+[filament:*0.4 Takoto*]
+compatible_printers_condition = nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_0.6 Takoto_.ini

@@ -0,0 +1,3 @@
+[filament:*0.6 Takoto*]
+compatible_printers_condition = nozzle_diameter[0]==0.6
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_0.8 Takoto_.ini

@@ -0,0 +1,3 @@
+[filament:*0.8 Takoto*]
+compatible_printers_condition = nozzle_diameter[0]==0.8
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_1.0 Takoto_.ini

@@ -0,0 +1,4 @@
+[filament:*1.0 Takoto*]
+compatible_printers_condition = nozzle_diameter[0]==1.0
+
+################ Generic 0.6 material presets ################

profile_sources/non-prusa-fff/HartSmartProducts/filament/_3D Fuel PCTG_.ini

@@ -0,0 +1,6 @@
+[filament:*3D Fuel PCTG*]
+inherits = *PCTG*; *3D Fuel*
+filament_cost = 39.99
+filament_density = 1.23
+
+## Polymaker

profile_sources/non-prusa-fff/HartSmartProducts/filament/_3D Fuel_.ini

@@ -0,0 +1,4 @@
+[filament:*3D Fuel*]
+filament_vendor = 3D Fuel
+filament_spool_weight = 320
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_ABS_.ini

@@ -0,0 +1,22 @@
+[filament:*ABS*]
+inherits = *common*
+filament_type = ABS
+temperature = 250
+bed_temperature = 100
+first_layer_temperature = 245
+first_layer_bed_temperature = 100
+idle_temperature = 170
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.92
+filament_density = 1.04
+filament_cost = 30
+filament_colour = #3A80CA
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 15
+max_fan_speed = 15
+bridge_fan_speed = 15
+disable_fan_first_layers = 3
+full_fan_speed_layers = 7
+fan_below_layer_time = 20
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_ASA_.ini

@@ -0,0 +1,22 @@
+[filament:*ASA*]
+inherits = *common*
+filament_type = ASA
+temperature = 255
+bed_temperature = 100
+first_layer_temperature = 250
+first_layer_bed_temperature = 100
+idle_temperature = 170
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.92
+filament_density = 1.06
+filament_cost = 40
+filament_colour = #3A08AC
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 15
+max_fan_speed = 15
+bridge_fan_speed = 15
+disable_fan_first_layers = 3
+full_fan_speed_layers = 7
+fan_below_layer_time = 20
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_BASF_.ini

@@ -0,0 +1,5 @@
+[filament:*BASF*]
+filament_vendor = BASF
+filament_spool_weight = 215
+
+## Jabil

profile_sources/non-prusa-fff/HartSmartProducts/filament/_BVOH_.ini

@@ -0,0 +1,23 @@
+[filament:*BVOH*]
+inherits = *common*
+filament_type = BVOH
+temperature = 220
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+idle_temperature = 120
+filament_max_volumetric_speed = 10
+extrusion_multiplier = 0.90
+filament_density = 1.14
+filament_cost = 100
+filament_colour = #FF3232
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 5
+max_fan_speed = 10
+bridge_fan_speed = 10
+disable_fan_first_layers = 4
+fan_below_layer_time = 30
+filament_soluble = 1
+compatible_prints_condition = notes=~/.*SOLUBLE_SUPPORT.*/
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Coex_.ini

@@ -0,0 +1,5 @@
+[filament:*Coex*]
+filament_vendor = Coex
+filament_spool_weight = 350
+
+################ Nozzle+Hotend Compatibility #################

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Essentium HTN-CF25_.ini

@@ -0,0 +1,6 @@
+[filament:*Essentium HTN-CF25*]
+inherits = *Nylon*; *Essentium*
+filament_cost = 230.00
+filament_density = 1.32
+filament_notes = Essentium HTN-CF25
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Essentium Support S10_.ini

@@ -0,0 +1,7 @@
+[filament:*Essentium Support S10*]
+inherits = *PVA*; *Essentium*
+filament_cost = 100.00
+filament_density = 1.14
+filament_notes = Essentium Support S10
+
+## BASF

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Essentium_.ini

@@ -0,0 +1,4 @@
+[filament:*Essentium*]
+filament_vendor = Essentium
+filament_spool_weight = 325
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_FLEX_.ini

@@ -0,0 +1,22 @@
+[filament:*FLEX*]
+inherits = *common*
+filament_type = FLEX
+temperature = 230
+bed_temperature = 50
+first_layer_temperature = 230
+first_layer_bed_temperature = 50
+idle_temperature = 170
+filament_max_volumetric_speed = 5
+extrusion_multiplier = 1.10
+filament_density = 1.16
+filament_cost = 50
+filament_colour = #ac5708
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 40
+max_fan_speed = 40
+bridge_fan_speed = 40
+disable_fan_first_layers = 3
+full_fan_speed_layers = 7
+fan_below_layer_time = 20
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Generic_.ini

@@ -0,0 +1,4 @@
+[filament:*Generic*]
+filament_vendor = Generic
+
+## Layer Line

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Jabil_.ini

@@ -0,0 +1,5 @@
+[filament:*Jabil*]
+filament_vendor = Jabil
+filament_spool_weight = 325
+
+## Coex

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Layer Line DuraPET_.ini

@@ -0,0 +1,7 @@
+[filament:*Layer Line DuraPET*]
+inherits = *PET*; *Layer Line*
+filament_cost = 29.99
+filament_density = 1.29
+filament_notes = Layer Line DuraPET
+
+## Push Plastic

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Layer Line Engineering PLA_.ini

@@ -0,0 +1,6 @@
+[filament:*Layer Line Engineering PLA*]
+inherits = *PLA*; *Layer Line*
+filament_cost = 34.99
+filament_density = 1.22
+filament_notes = Layer Line Engineering PLA
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Layer Line_.ini

@@ -0,0 +1,4 @@
+[filament:*Layer Line*]
+filament_vendor = HartSmart Products
+filament_spool_weight = 200
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Nylon_.ini

@@ -0,0 +1,22 @@
+[filament:*Nylon*]
+inherits = *common*
+filament_type = NYLON
+temperature = 255
+bed_temperature = 70
+first_layer_temperature = 250
+first_layer_bed_temperature = 70
+idle_temperature = 170
+filament_max_volumetric_speed = 12
+extrusion_multiplier = 0.94
+filament_density = 1.06
+filament_cost = 40
+filament_colour = #3A08AC
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 10
+max_fan_speed = 15
+bridge_fan_speed = 15
+disable_fan_first_layers = 3
+full_fan_speed_layers = 7
+fan_below_layer_time = 20
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_PCTG_.ini

@@ -0,0 +1,22 @@
+[filament:*PCTG*]
+inherits = *common*
+filament_type = PCTG
+temperature = 250
+bed_temperature = 80
+first_layer_temperature = 250
+first_layer_bed_temperature = 80
+idle_temperature = 190
+filament_max_volumetric_speed = 12
+extrusion_multiplier = 0.94
+filament_density = 1.21
+filament_cost = 40
+filament_colour = #FF8000
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 70
+max_fan_speed = 70
+bridge_fan_speed = 70
+disable_fan_first_layers = 3
+full_fan_speed_layers = 7
+fan_below_layer_time = 20
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_PC_.ini

@@ -0,0 +1,22 @@
+[filament:*PC*]
+inherits = *common*
+filament_type = PC
+temperature = 270
+bed_temperature = 100
+first_layer_temperature = 265
+first_layer_bed_temperature = 100
+idle_temperature = 180
+filament_max_volumetric_speed = 12
+extrusion_multiplier = 0.94
+filament_density = 1.19
+filament_cost = 50
+filament_colour = #3A08AC
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 10
+max_fan_speed = 10
+bridge_fan_speed = 10
+disable_fan_first_layers = 3
+full_fan_speed_layers = 7
+fan_below_layer_time = 20
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_PETG_.ini

@@ -0,0 +1,22 @@
+[filament:*PETG*]
+inherits = *common*
+filament_type = PETG
+temperature = 245
+bed_temperature = 80
+first_layer_temperature = 240
+first_layer_bed_temperature = 80
+idle_temperature = 160
+filament_max_volumetric_speed = 12
+extrusion_multiplier = 0.94
+filament_density = 1.27
+filament_cost = 30
+filament_colour = #FF8000
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 70
+max_fan_speed = 70
+bridge_fan_speed = 70
+disable_fan_first_layers = 3
+full_fan_speed_layers = 7
+fan_below_layer_time = 20
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_PET_.ini

@@ -0,0 +1,22 @@
+[filament:*PET*]
+inherits = *common*
+filament_type = PETG
+temperature = 275
+bed_temperature = 80
+first_layer_temperature = 270
+first_layer_bed_temperature = 80
+idle_temperature = 180
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.96
+filament_density = 1.27
+filament_cost = 30
+filament_colour = #FF8000
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 70  
+max_fan_speed = 80
+bridge_fan_speed = 80
+disable_fan_first_layers = 3
+full_fan_speed_layers = 7
+fan_below_layer_time = 20
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_PLA_.ini

@@ -0,0 +1,22 @@
+[filament:*PLA*]
+inherits = *common*
+filament_type = PLA
+temperature = 205
+bed_temperature = 60
+first_layer_temperature = 195
+first_layer_bed_temperature = 60
+idle_temperature = 140
+filament_max_volumetric_speed = 15
+extrusion_multiplier = 0.94
+filament_density = 1.24
+filament_cost = 25
+filament_colour = #FF3232
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 70
+max_fan_speed = 70
+bridge_fan_speed = 70
+disable_fan_first_layers = 2
+full_fan_speed_layers = 6
+fan_below_layer_time = 60
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_PVA_.ini

@@ -0,0 +1,24 @@
+[filament:*PVA*]
+inherits = *common*
+filament_type = PVA
+temperature = 220
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+idle_temperature = 120
+filament_max_volumetric_speed = 10
+extrusion_multiplier = 0.90
+filament_density = 1.24
+filament_cost = 80
+filament_colour = #FF3232
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 5
+max_fan_speed = 10
+bridge_fan_speed = 10
+disable_fan_first_layers = 4
+fan_below_layer_time = 30
+filament_soluble = 1
+compatible_prints_condition = notes=~/.*SOLUBLE_SUPPORT.*/
+
+#################### Vendor Base Presets #####################

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Polymaker PolyFlex TPU95-HF_.ini

@@ -0,0 +1,8 @@
+[filament:*Polymaker PolyFlex TPU95-HF*]
+inherits = *FLEX*; *Polymaker*
+filament_cost = 49.99
+filament_density = 1.16
+idle_temperature = 170
+filament_notes = Polymaker PolyFlex TPU95-HF
+
+## Taulman

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Polymaker_.ini

@@ -0,0 +1,4 @@
+[filament:*Polymaker*]
+filament_vendor = Polymaker
+filament_spool_weight = 140
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Push Plastic PETG_.ini

@@ -0,0 +1,7 @@
+[filament:*Push Plastic PETG*]
+inherits = *PETG*; *Push Plastic*
+filament_cost = 32.99
+filament_density = 1.27
+filament_notes = Push Plastic PETG
+
+##3D Fuel

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Push Plastic PLA_.ini

@@ -0,0 +1,6 @@
+[filament:*Push Plastic PLA*]
+inherits = *PLA*; *Push Plastic*
+filament_cost = 29.99
+filament_density = 1.24
+filament_notes = Push Plastic PLA
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Push Plastic_.ini

@@ -0,0 +1,4 @@
+[filament:*Push Plastic*]
+filament_vendor = Push Plastic
+filament_spool_weight = 320 # 750g spools weight 350g
+

profile_sources/non-prusa-fff/HartSmartProducts/filament/_Taulman_.ini

@@ -0,0 +1,5 @@
+[filament:*Taulman*]
+filament_vendor = Taulman
+filament_spool_weight = 325
+
+## Essentium

profile_sources/non-prusa-fff/HartSmartProducts/filament/_common_.ini

@@ -0,0 +1,14 @@
+[filament:*common*]
+cooling = 0
+compatible_printers =
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_print_speed = 15
+slowdown_below_layer_time = 10
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_HSP.*/
+
+################### Materials base presets ###################