Initial Profile Sources

2026-10-01 10:37:17 +00:00 · 2026-03-19 01:54:47 +00:00
parent 7e2e8f9d47
commit 1f7873734a
13374 changed files with 256890 additions and 0 deletions
@@ -0,0 +1,4 @@
+[filament:Devil Design PETG @PROTON_X]
+inherits =*common Devil Design PETG @INAT*
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
@@ -0,0 +1,3 @@
+[filament:Devil Design PETG @PROTON_XE750]
+inherits = *common Devil Design PETG @INAT*; *start_end_gcode @PROTON_XE750*
+
@@ -0,0 +1,11 @@
+[filament:Filament PM PETG FRJet @PROTON_X]
+inherits =*common Filament PM PETG FRJet @INAT*
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
+
+
+
+#########               #########
+######### Proton XE 750 #########
+#########               #########
+
@@ -0,0 +1,2 @@
+[filament:Filament PM PETG FRJet @PROTON_XE750]
+inherits = *common Filament PM PETG FRJet @INAT*; *start_end_gcode @PROTON_XE750*
@@ -0,0 +1,5 @@
+[filament:Generic ABS @PROTON_X]
+inherits =*common ABS @INAT*
+renamed_from = "ABS @PROTON_X"
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
@@ -0,0 +1,4 @@
+[filament:Generic ABS @PROTON_XE750]
+inherits = *common ABS @INAT*; *start_end_gcode @PROTON_XE750*
+renamed_from = "ABS @PROTON_XE750"
+
@@ -0,0 +1,5 @@
+[filament:Generic ASA @PROTON_X]
+inherits =*common ASA @INAT*
+renamed_from = "ASA @PROTON_X"
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
@@ -0,0 +1,4 @@
+[filament:Generic ASA @PROTON_XE750]
+inherits = *common ASA @INAT*; *start_end_gcode @PROTON_XE750*
+renamed_from = "ASA @PROTON_XE750"
+
@@ -0,0 +1,5 @@
+[filament:Generic CPE @PROTON_X]
+inherits =*common CPE @INAT*
+renamed_from = "CPE @PROTON_X"
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
@@ -0,0 +1,4 @@
+[filament:Generic CPE @PROTON_XE750]
+inherits = *common CPE @INAT*; *start_end_gcode @PROTON_XE750*
+renamed_from = "CPE @PROTON_XE750"
+
@@ -0,0 +1,5 @@
+[filament:Generic HIPS @PROTON_X]
+inherits =*common HIPS @INAT*
+renamed_from = "HIPS @PROTON_X"
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
@@ -0,0 +1,4 @@
+[filament:Generic HIPS @PROTON_XE750]
+inherits = *common HIPS @INAT*; *start_end_gcode @PROTON_XE750*
+renamed_from = "HIPS @PROTON_XE750"
+
@@ -0,0 +1,5 @@
+[filament:Generic Nylon @PROTON_X]
+inherits =*common Nylon @INAT*
+renamed_from = "Nylon @PROTON_X"
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
@@ -0,0 +1,4 @@
+[filament:Generic Nylon @PROTON_XE750]
+inherits = *common Nylon @INAT*; *start_end_gcode @PROTON_XE750*
+renamed_from = "Nylon @PROTON_XE750"
+
@@ -0,0 +1,5 @@
+[filament:Generic PC @PROTON_X]
+inherits =*common PC @INAT*
+renamed_from = "PC @PROTON_X"
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
@@ -0,0 +1,4 @@
+[filament:Generic PC @PROTON_XE750]
+inherits = *common PC @INAT*; *start_end_gcode @PROTON_XE750*
+renamed_from = "PC @PROTON_XE750"
+
@@ -0,0 +1,5 @@
+[filament:Generic PEEK @PROTON_X]
+inherits =*common PEEK @INAT*
+renamed_from = "PEEK @PROTON_X"
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
@@ -0,0 +1,4 @@
+[filament:Generic PEEK @PROTON_XE750]
+inherits = *common PEEK @INAT*; *start_end_gcode @PROTON_XE750*
+renamed_from = "PEEK @PROTON_XE750"
+
@@ -0,0 +1,5 @@
+[filament:Generic PEI @PROTON_X]
+inherits =*common PEI @INAT*
+renamed_from = "PEI @PROTON_X"
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
@@ -0,0 +1,4 @@
+[filament:Generic PEI @PROTON_XE750]
+inherits = *common PEI @INAT*; *start_end_gcode @PROTON_XE750*
+renamed_from = "PEI @PROTON_XE750"
+
@@ -0,0 +1,5 @@
+[filament:Generic PETG @PROTON_X]
+inherits =*common PETG @INAT*
+renamed_from = "PETG @PROTON_X"
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
@@ -0,0 +1,4 @@
+[filament:Generic PETG @PROTON_XE750]
+inherits = *common PETG @INAT*; *start_end_gcode @PROTON_XE750*
+renamed_from = "PETG @PROTON_XE750"
+
@@ -0,0 +1,5 @@
+[filament:Generic PLA @PROTON_X]
+inherits =*common PLA @INAT*
+renamed_from = "PLA @PROTON_X"
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
@@ -0,0 +1,4 @@
+[filament:Generic PLA @PROTON_XE750]
+inherits = *common PLA @INAT*; *start_end_gcode @PROTON_XE750*
+renamed_from = "PLA @PROTON_XE750"
+
@@ -0,0 +1,5 @@
+[filament:Generic TPE @PROTON_X]
+inherits =*common TPE @INAT*
+renamed_from = "TPE @PROTON_X"
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
@@ -0,0 +1,4 @@
+[filament:Generic TPE @PROTON_XE750]
+inherits = *common TPE @INAT*; *start_end_gcode @PROTON_XE750*
+renamed_from = "TPE @PROTON_XE750"
+
@@ -0,0 +1,4 @@
+[filament:Polymaker PolyMide CoPA @PROTON_X]
+inherits =*common Polymaker PolyMide CoPA @INAT*
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
@@ -0,0 +1,3 @@
+[filament:Polymaker PolyMide CoPA @PROTON_XE750]
+inherits = *common Polymaker PolyMide CoPA @INAT*; *start_end_gcode @PROTON_XE750*
+
@@ -0,0 +1,4 @@
+[filament:Polymaker PolyMide PA6-CF @PROTON_X]
+inherits =*common Polymaker PolyMide PA6-CF @INAT*
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
@@ -0,0 +1,3 @@
+[filament:Polymaker PolyMide PA6-CF @PROTON_XE750]
+inherits = *common Polymaker PolyMide PA6-CF @INAT*; *start_end_gcode @PROTON_XE750*
+
@@ -0,0 +1,4 @@
+[filament:Polymaker PolyMide PA6-GF @PROTON_X]
+inherits =*common Polymaker PolyMide PA6-GF @INAT*
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
@@ -0,0 +1,3 @@
+[filament:Polymaker PolyMide PA6-GF @PROTON_XE750]
+inherits = *common Polymaker PolyMide PA6-GF @INAT*; *start_end_gcode @PROTON_XE750*
+
@@ -0,0 +1,12 @@
+[filament:*common ABS @INAT*]
+inherits = *common*
+temperature = 235
+bed_temperature = 100
+first_layer_temperature = 235
+first_layer_bed_temperature = 100
+filament_type = ABS
+filament_cost = 20
+filament_density = 1.01
+cooling = 0
+bridge_fan_speed = 0
+
@@ -0,0 +1,11 @@
+[filament:*common ASA @INAT*]
+inherits = *common*
+temperature = 240
+bed_temperature = 110
+first_layer_temperature = 240
+first_layer_bed_temperature = 110
+filament_type = ASA
+filament_cost = 22
+filament_density = 1.07
+cooling = 0
+
@@ -0,0 +1,12 @@
+[filament:*common CPE @INAT*]
+inherits = *common*
+temperature = 280
+bed_temperature = 90
+first_layer_temperature = 280
+first_layer_bed_temperature = 90
+filament_type = PEI
+filament_cost = 380
+filament_density = 1.27
+cooling = 0
+bridge_fan_speed = 0
+
@@ -0,0 +1,14 @@
+[filament:*common Devil Design PETG @INAT*]
+inherits = *common*
+filament_vendor = Devil Design
+temperature = 245
+bed_temperature = 80
+first_layer_temperature = 245
+first_layer_bed_temperature = 80
+filament_type = PETG
+filament_cost = 22
+filament_density = 1.23
+fan_always_on = 1
+min_fan_speed = 25
+max_fan_speed = 50
+
@@ -0,0 +1,17 @@
+[filament:*common Filament PM PETG FRJet @INAT*]
+inherits = *common*
+filament_vendor = Filament PM
+temperature = 250
+bed_temperature = 90
+first_layer_temperature = 250
+first_layer_bed_temperature = 90
+filament_type = PETG
+filament_cost = 45.5
+filament_density = 1.27
+cooling = 0
+
+
+######
+######  PROTON X PRINTERS
+######
+
@@ -0,0 +1,13 @@
+[filament:*common HIPS @INAT*]
+inherits = *common*
+temperature = 245
+bed_temperature = 100
+first_layer_temperature = 245
+first_layer_bed_temperature = 100
+filament_type = HIPS
+filament_cost = 15
+filament_density = 1.04
+min_fan_speed = 0
+max_fan_speed = 50
+filament_soluble = 1
+
@@ -0,0 +1,12 @@
+[filament:*common Nylon @INAT*]
+inherits = *common*
+temperature = 235
+bed_temperature = 130
+first_layer_temperature = 235
+first_layer_bed_temperature = 130
+filament_type = Nylon
+filament_cost = 70
+filament_density = 1.01
+cooling = 0
+bridge_fan_speed = 0
+
@@ -0,0 +1,12 @@
+[filament:*common PC @INAT*]
+inherits = *common*
+temperature = 270
+bed_temperature = 115
+first_layer_temperature = 270
+first_layer_bed_temperature = 115
+filament_type = PC
+filament_cost = 65
+filament_density = 1.19
+cooling = 0
+bridge_fan_speed = 0
+
@@ -0,0 +1,12 @@
+[filament:*common PEEK @INAT*]
+inherits = *common*
+temperature = 440
+bed_temperature = 150
+first_layer_temperature = 440
+first_layer_bed_temperature = 150
+filament_type = PEEK
+filament_cost = 500
+filament_density = 1.3
+cooling = 0
+bridge_fan_speed = 0
+
@@ -0,0 +1,12 @@
+[filament:*common PEI @INAT*]
+inherits = *common*
+temperature = 400
+bed_temperature = 150
+first_layer_temperature = 400
+first_layer_bed_temperature = 150
+filament_type = PEI
+filament_cost = 380
+filament_density = 1.27
+cooling = 0
+bridge_fan_speed = 0
+
@@ -0,0 +1,13 @@
+[filament:*common PETG @INAT*]
+inherits = *common*
+temperature = 240
+bed_temperature = 80
+first_layer_temperature = 240
+first_layer_bed_temperature = 80
+filament_type = PETG
+filament_cost = 25
+filament_density = 1.27
+fan_always_on = 1
+min_fan_speed = 25
+max_fan_speed = 50
+
@@ -0,0 +1,14 @@
+[filament:*common PLA @INAT*]
+inherits = *common*
+temperature = 210
+bed_temperature = 60
+first_layer_temperature = 210
+first_layer_bed_temperature = 60
+filament_type = PLA
+filament_cost = 20
+filament_density = 1.25
+fan_always_on = 1
+min_fan_speed = 50
+max_fan_speed = 100
+
+
@@ -0,0 +1,12 @@
+[filament:*common Polymaker PolyMide CoPA @INAT*]
+inherits = *common*
+filament_vendor = Polymaker
+temperature = 265
+bed_temperature = 50
+first_layer_temperature = 265
+first_layer_bed_temperature = 50
+filament_type = Nylon
+filament_cost = 93
+filament_density = 1.12
+cooling = 0
+
@@ -0,0 +1,12 @@
+[filament:*common Polymaker PolyMide PA6-CF @INAT*]
+inherits = *common*
+filament_vendor = Polymaker
+temperature = 300
+bed_temperature = 40
+first_layer_temperature = 300
+first_layer_bed_temperature = 40
+filament_type = Nylon
+filament_cost = 95
+filament_density = 1.17
+cooling = 0
+
@@ -0,0 +1,12 @@
+[filament:*common Polymaker PolyMide PA6-GF @INAT*]
+inherits = *common*
+filament_vendor = Polymaker
+temperature = 300
+bed_temperature = 40
+first_layer_temperature = 300
+first_layer_bed_temperature = 40
+filament_type = Nylon
+filament_cost = 95
+filament_density = 1.2
+cooling = 0
+
@@ -0,0 +1,14 @@
+[filament:*common TPE @INAT*]
+inherits = *common*
+temperature = 220
+bed_temperature = 40
+first_layer_temperature = 220
+first_layer_bed_temperature = 40
+filament_type = TPE
+filament_cost = 32
+filament_density = 0.9
+min_fan_speed = 0
+max_fan_speed = 50
+filament_retract_length = 0.8
+filament_retract_speed = 25
+
@@ -0,0 +1,19 @@
+[filament:*common*]
+#filament
+filament_colour = #29B2B2
+filament_diameter = 1.75
+extrusion_multiplier = 1
+filament_vendor = Generic
+#cooling
+fan_always_on = 0
+cooling = 1
+bridge_fan_speed = 100
+disable_fan_first_layers = 3
+full_fan_speed_layer = 0
+fan_below_layer_time = 10
+slowdown_below_layer_time = 5
+min_print_speed = 10
+#advanced
+filament_soluble = 0
+
+
@@ -0,0 +1,7 @@
+[filament:*start_end_gcode @PROTON_XE750*]
+start_filament_gcode = "; Filament start gcode BEGIN\nM104 S[temperature[current_extruder]]\nG4 S20\n; Filament start gcode END\n"
+end_filament_gcode = "; Filament end gcode BEGIN\nG0 X-5 Y250 F10000\nM104 S{temperature[current_extruder] - 50}\n; Filament end gcode END\n"
+compatible_printers = "Proton XE-750"
+
+
+