Initial Profile Sources

profile_sources/non-prusa-fff/INAT/print/0.12mm Fine @PROTON_X.ini

@@ -0,0 +1,4 @@
+[print:0.12mm Fine @PROTON_X]
+inherits = *common 0.12mm Fine @INAT*
+compatible_printers = "Proton X Rail";"Proton X Rod"
+

profile_sources/non-prusa-fff/INAT/print/0.12mm Fine @PROTON_XE750.ini

@@ -0,0 +1,4 @@
+[print:0.12mm Fine @PROTON_XE750]
+inherits = *common 0.12mm Fine @INAT*
+compatible_printers = "Proton XE-750"
+

profile_sources/non-prusa-fff/INAT/print/0.2mm Advanced Material @PROTON_X.ini

@@ -0,0 +1,4 @@
+[print:0.2mm Advanced Material @PROTON_X]
+inherits = *common 0.2mm Advanced Material @INAT*
+compatible_printers = "Proton X Rail";"Proton X Rod"
+

profile_sources/non-prusa-fff/INAT/print/0.2mm Advanced Material @PROTON_XE750.ini

@@ -0,0 +1,4 @@
+[print:0.2mm Advanced Material @PROTON_XE750]
+inherits = *common 0.2mm Advanced Material @INAT*
+compatible_printers = "Proton XE-750"
+

profile_sources/non-prusa-fff/INAT/print/0.2mm Standard @PROTON_X.ini

@@ -0,0 +1,4 @@
+[print:0.2mm Standard @PROTON_X]
+inherits = *common 0.2mm Standard @INAT*
+compatible_printers = "Proton X Rail";"Proton X Rod"
+

profile_sources/non-prusa-fff/INAT/print/0.2mm Standard @PROTON_XE750.ini

@@ -0,0 +1,4 @@
+[print:0.2mm Standard @PROTON_XE750]
+inherits = *common 0.2mm Standard @INAT*
+compatible_printers = "Proton XE-750"
+

profile_sources/non-prusa-fff/INAT/print/0.2mm Strong @PROTON_X.ini

@@ -0,0 +1,4 @@
+[print:0.2mm Strong @PROTON_X]
+inherits = *common 0.2mm Strong @INAT*
+compatible_printers = "Proton X Rail";"Proton X Rod"
+

profile_sources/non-prusa-fff/INAT/print/0.2mm Strong @PROTON_XE750.ini

@@ -0,0 +1,4 @@
+[print:0.2mm Strong @PROTON_XE750]
+inherits = *common 0.2mm Strong @INAT*
+compatible_printers = "Proton XE-750"
+

profile_sources/non-prusa-fff/INAT/print/0.32mm Draft @PROTON_X.ini

@@ -0,0 +1,6 @@
+[print:0.32mm Draft @PROTON_X]
+inherits = *common 0.32mm Draft @INAT*
+compatible_printers = "Proton X Rail";"Proton X Rod"
+
+
+

profile_sources/non-prusa-fff/INAT/print/0.32mm Draft @PROTON_XE750.ini

@@ -0,0 +1,9 @@
+[print:0.32mm Draft @PROTON_XE750]
+inherits = *common 0.32mm Draft @INAT*
+compatible_printers = "Proton XE-750"
+
+
+
+
+
+

profile_sources/non-prusa-fff/INAT/print/_common 0.12mm Fine @INAT_.ini

@@ -0,0 +1,9 @@
+[print:*common 0.12mm Fine @INAT*]
+inherits = *common*
+layer_height = 0.12
+bottom_solid_layers = 7
+top_solid_layers = 7
+infill_every_layers = 2
+perimeter_speed = 50
+infill_speed = 50
+

profile_sources/non-prusa-fff/INAT/print/_common 0.2mm Advanced Material @INAT_.ini

@@ -0,0 +1,12 @@
+[print:*common 0.2mm Advanced Material @INAT*]
+inherits = *common*
+bottom_solid_layers = 5
+top_solid_layers = 6
+skirts = 0
+brim_width = 20
+infill_speed = 60
+support_material_speed = 60
+travel_speed = 100
+first_layer_speed = 20
+elefant_foot_compensation = 0
+

profile_sources/non-prusa-fff/INAT/print/_common 0.2mm Standard @INAT_.ini

@@ -0,0 +1,3 @@
+[print:*common 0.2mm Standard @INAT*]
+inherits = *common*
+

profile_sources/non-prusa-fff/INAT/print/_common 0.2mm Strong @INAT_.ini

@@ -0,0 +1,5 @@
+[print:*common 0.2mm Strong @INAT*]
+inherits = *common*
+fill_density = 50%
+perimeters = 6
+

profile_sources/non-prusa-fff/INAT/print/_common 0.32mm Draft @INAT_.ini

@@ -0,0 +1,14 @@
+[print:*common 0.32mm Draft @INAT*]
+inherits = *common*
+layer_height = 0.32
+perimeter_speed = 80
+external_perimeter_speed = 75%
+infill_speed = 100
+top_solid_infill_speed = 60
+fill_density = 15%
+support_material_style = snug
+
+###
+### COMMON PRINTER DEFINITIONS
+###
+

profile_sources/non-prusa-fff/INAT/print/_common_.ini

@@ -0,0 +1,110 @@
+[print:*common*]
+#layers
+layer_height = 0.2
+first_layer_height = 0.2
+perimeters = 3
+spiral_vase = 0
+top_solid_layers = 5
+bottom_solid_layers = 3
+top_solid_min_thickness = 1
+bottom_solid_min_thickness = 0.6
+extra_perimeters = 1
+ensure_vertical_shell_thickness = 1
+avoid_crossing_perimeters = 0
+thin_walls = 0
+thick_bridges = 0
+overhangs = 1
+seam_position = aligned
+external_perimeters_first = 0
+#infill
+fill_density = 30%
+fill_pattern = cubic
+infill_anchor = 600%
+infill_anchor_max = 30
+top_fill_pattern = monotonic
+bottom_fill_patter = monotonic
+ironing = 0
+ironing_type = top
+infill_every_layers = 1
+infill_only_where_needed = 0
+solid_infill_every_layers = 0
+fill_angle = 45
+solid_infill_below_area = 20
+bridge_angle = 0
+only_retract_when_crossing_perimeters = 0
+infill_first = 0
+#skirt brim
+skirts = 5
+skirt_distance = 15
+skirt_height = 1
+draft_shield = 0
+min_skirt_length = 5
+brim_width = 0
+#support
+support_material = 0
+support_material_auto = 1
+support_material_threshold = 0
+support_material_enforce_layers = 0
+raft_layers = 0
+support_material_style = grid
+support_material_contact_distance = 0.25
+support_material_bottom_contact_distance = 0.3
+support_material_pattern = rectilinear
+support_material_with_sheath = 0
+support_material_spacing = 5
+support_material_angle = 45
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_contact_loops = 0
+support_material_buildplate_only = 0
+support_material_xy_spacing = 1
+dont_support_bridges = 1
+#speed
+perimeter_speed = 60
+small_perimeter_speed = 75%
+external_perimeter_speed = 50%
+infill_speed = 80
+solid_infill_speed = 80%
+top_solid_infill_speed = 20
+support_material_speed = 80
+support_material_interface_speed = 100%
+bridge_speed = 60
+gap_fill_speed = 40
+ironing_speed = 30
+travel_speed = 150
+first_layer_speed = 30
+default_acceleration = 0
+max_print_speed = 80
+max_volumetric_speed = 12
+#multiple extruders
+perimeter_extruder = 1
+infill_extruder = 1
+solid_infill_extruder = 1
+support_material_extruder = 1
+support_material_interface_extruder = 1
+ooze_prevention = 0
+wipe_tower = 0
+interface_shells = 0
+#advanced
+extrusion_width = 0
+first_layer_extrusion_width = 0
+perimeter_extrusion_width = 0
+external_perimeter_extrusion_width = 0
+infill_extrusion_width = 0
+solid_infill_extrusion_width = 0
+top_infill_extrusion_width = 0
+support_material_extrusion_width = 0
+infill_overlap = 25%
+bridge_flow_ratio = 1
+slice_closing_radius = 0.049
+resolution = 0
+xy_size_compensation = -0.05
+elefant_foot_compensation = 0.3
+clip_multipart_objects = 0
+#output
+complete_objects = 0
+gcode_comments = 0
+gcode_label_objects = 0
+output_filename_format = {input_filename_base}_{filament_type[0]}.gcode
+
+