Initial Profile Sources

profile_sources/non-prusa-fff/Infinity3D/printer/_common_.ini

@@ -0,0 +1,64 @@
+[printer:*common*]
+bed_shape = 0x0,350x0,350x350,0x350
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = ""
+default_print_profile = 
+end_gcode = ;End GCode begin\nM140 S0 ;Heated bed heater off\nM104 S0 ;Extruder heater off\nG90 ;absolute positioning\nG92 E0 ;Retract the filament\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z350 E-1 F3000 ;move Z up a bit and retract filament even more\nG1 X0 F3000 ;move X to min endstops, so the head is out of the way\nG1 Y350 F3000 ;so the head is out of the way and Plate is moved forward\nM84 ;stepper off\nM107 ; fan off\nM82 ; absolute extrusion\n;End GCode end
+extra_loading_move = -2
+extruder_colour = ""
+extruder_offset = 0x0
+gcode_flavor = marlin
+high_current_on_filament_swap = 0
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 10000
+machine_max_acceleration_extruding = 1000
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_travel = 1500
+machine_max_acceleration_x = 3000
+machine_max_acceleration_y = 3000
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 25
+machine_max_feedrate_x = 150
+machine_max_feedrate_y = 150
+machine_max_feedrate_z = 50
+machine_max_jerk_e = 2.5
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 0.2
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+max_layer_height = 0.4
+max_print_height = 350
+min_layer_height = 0.08
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = 
+printer_technology = FFF
+remaining_times = 0
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 2
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 328
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 60
+deretract_speed = 40
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = Start GCode begin\nM140 S[first_layer_bed_temperature] ;Start Warming Bed\nM104 S[first_layer_temperature] ;Preheat\nG28 ;home\nG29 ;Auto Bed-level\nG90 ;absolute positioning\nG1 X-10 Y-10 F3000 ;Move to corner\nM190 S[first_layer_bed_temperature] ;Wait For Bed Temperature\nM109 S[first_layer_temperature] ;Wait for Hotend Temperature\nG92 E0 ;Zero set extruder position\nG1 E3 F200 ;Feed filament to clear nozzle\nG92 E0 ;Zero set extruder position
+thumbnails = 16x16,220x124
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
+extruder_clearance_height = 25
+extruder_clearance_radius = 75
+