Initial Profile Sources

2026-10-01 02:27:17 +00:00 · 2026-03-19 01:54:47 +00:00
parent 7e2e8f9d47
commit 1f7873734a
13374 changed files with 256890 additions and 0 deletions
@@ -0,0 +1,8 @@
+[filament:3DxTech PETG @MakerGear]
+inherits = *PET*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 27.90
+filament_density = 1.27
+filament_spool_weight = 235
+filament_vendor = 3DxTech
+
@@ -0,0 +1,6 @@
+[filament:AmazonBasics PLA @MakerGear]
+inherits = *PLA*
+filament_cost = 25.4
+filament_density = 1.24
+filament_vendor = AmazonBasics
+
@@ -0,0 +1,27 @@
+[filament:AmazonBasics TPU @MakerGear]
+inherits = *FLEX*
+bed_temperature = 50
+bridge_fan_speed = 100
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+cooling = 1
+disable_fan_first_layers = 4
+extrusion_multiplier = 1.14
+fan_always_on = 1
+filament_cost = 19.99
+filament_density = 1.21
+filament_deretract_speed = 20
+filament_max_volumetric_speed = 1.8
+filament_retract_before_travel = 3
+filament_retract_length = 2
+filament_retract_lift = 0
+filament_retract_speed = 45
+filament_vendor = AmazonBasics
+filament_wipe = 0
+first_layer_bed_temperature = 50
+first_layer_temperature = 235
+full_fan_speed_layer = 6
+max_fan_speed = 80
+min_fan_speed = 80
+min_print_speed = 15
+temperature = 235
+
@@ -0,0 +1,12 @@
+[filament:E3D PC-ABS @MakerGear]
+inherits = *ABS*
+filament_vendor = E3D
+filament_cost = 0
+filament_type = PC
+filament_density = 1.05
+first_layer_temperature = 275
+temperature = 270
+
+# ---------------------------
+# ASA Filament
+# ---------------------------
@@ -0,0 +1,12 @@
+[filament:Empty @MakerGear]
+inherits = *EMPTY*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2_DUAL|3_ID)).*/
+filament_cost = 0
+filament_density = 0
+filament_spool_weight = 0
+filament_vendor = MakerGear
+filament_type = Misc
+
+# ---------------------------
+# Generic Filament
+# ---------------------------
@@ -0,0 +1,8 @@
+[filament:Esun ABS @MakerGear]
+inherits = *ABS*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 27.82
+filament_density = 1.01
+filament_spool_weight = 265
+filament_vendor = Esun
+
@@ -0,0 +1,7 @@
+[filament:Esun PETG @MakerGear]
+inherits = *PET*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 21.50
+filament_density = 1.27
+filament_vendor = Esun
+
@@ -0,0 +1,7 @@
+[filament:Esun PLA @MakerGear]
+inherits = *PLA*
+filament_cost = 25.4
+filament_density = 1.24
+filament_spool_weight = 265
+filament_vendor = Esun
+
@@ -0,0 +1,25 @@
+[filament:Fiberlogy ASA @MakerGear]
+inherits = *ABS*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_vendor = Fiberlogy
+filament_cost = 33
+filament_density = 1.07
+filament_spool_weight = 330
+fan_always_on = 0
+cooling = 1
+min_fan_speed = 10
+max_fan_speed = 15
+bridge_fan_speed = 30
+min_print_speed = 15
+slowdown_below_layer_time = 15
+first_layer_temperature = 260
+temperature = 260
+first_layer_bed_temperature = 105
+bed_temperature = 110
+filament_type = ASA
+fan_below_layer_time = 30
+disable_fan_first_layers = 5
+
+# ---------------------------
+# PETG Filament
+# ---------------------------
@@ -0,0 +1,18 @@
+[filament:Fiberlogy Nylon PA12 @MakerGear]
+inherits = Fiberlogy ASA @MakerGear
+bed_temperature = 105
+bridge_fan_speed = 30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_cost = 48
+filament_density = 1.01
+filament_max_volumetric_speed = 6
+filament_retract_lift = 0.2
+filament_type = NYLON
+first_layer_bed_temperature = 110
+first_layer_temperature = 265
+max_fan_speed = 15
+min_fan_speed = 10
+temperature = 265
+
@@ -0,0 +1,19 @@
+[filament:Fiberlogy Nylon PA12+CF15 @MakerGear]
+inherits = Fiberlogy Nylon PA12 @MakerGear
+bed_temperature = 110
+bridge_fan_speed = 30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+extrusion_multiplier = 0.97
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_cost = 87.5
+filament_density = 1.07
+filament_max_volumetric_speed = 6
+first_layer_bed_temperature = 105
+first_layer_temperature = 265
+max_fan_speed = 15
+min_fan_speed = 10
+temperature = 265
+# ---------------------------
+# Flex Filament
+# ---------------------------
@@ -0,0 +1,7 @@
+[filament:Fiberlogy PETG @MakerGear]
+inherits = *PET*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 21.50
+filament_density = 1.27
+filament_vendor = Fiberlogy
+
@@ -0,0 +1,6 @@
+[filament:Fiberlogy PLA @MakerGear]
+inherits = *PLA*
+filament_cost = 25.4
+filament_density = 1.24
+filament_vendor = Fiberlogy
+
@@ -0,0 +1,10 @@
+[filament:Fillamentum ABS @MakerGear]
+inherits = *ABS*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 32.4
+filament_density = 1.04
+filament_spool_weight = 230
+filament_vendor = Fillamentum
+first_layer_temperature = 240
+temperature = 240
+
@@ -0,0 +1,17 @@
+[filament:Fillamentum ASA @MakerGear]
+inherits = *ABS*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+cooling = 1
+fan_always_on = 1
+filament_cost = 38.7
+filament_density = 1.07
+filament_spool_weight = 230
+filament_type = ASA
+filament_vendor = Fillamentum
+first_layer_temperature = 265
+max_fan_speed = 20
+min_fan_speed = 20
+min_print_speed = 15
+slowdown_below_layer_time = 15
+temperature = 265
+
@@ -0,0 +1,7 @@
+[filament:Fillamentum PLA @MakerGear]
+inherits = *PLA*
+filament_cost = 35.48
+filament_density = 1.24
+filament_spool_weight = 230
+filament_vendor = Fillamentum
+
@@ -0,0 +1,7 @@
+[filament:Generic ABS @MakerGear]
+inherits = *ABS*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 27.82
+filament_density = 1.04
+filament_vendor = Generic
+
@@ -0,0 +1,12 @@
+[filament:Generic ASA @MakerGear]
+inherits = *ABS*
+bed_temperature = 90
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 27.82
+filament_density = 1.04
+filament_type = ASA
+filament_vendor = Generic
+first_layer_bed_temperature = 95
+first_layer_temperature = 250
+temperature = 245
+
@@ -0,0 +1,11 @@
+[filament:Generic FLEX @MakerGear]
+inherits = *FLEX*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 82
+filament_density = 1.22
+filament_max_volumetric_speed = 1.2
+filament_retract_length = 0
+filament_retract_lift = nil
+filament_retract_speed = nil
+filament_vendor = Generic
+
@@ -0,0 +1,22 @@
+[filament:Generic HIPS @MakerGear]
+inherits = *ABS*
+bridge_fan_speed = 50
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+cooling = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 10
+filament_colour = #FFFFD7
+filament_cost = 27.3
+filament_density = 1.04
+filament_soluble = 1
+filament_type = HIPS
+filament_vendor = Generic
+first_layer_temperature = 230
+max_fan_speed = 20
+min_fan_speed = 20
+temperature = 230
+
+# /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
+# |~~~ Common printer presets ~~~|
+# \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
@@ -0,0 +1,8 @@
+[filament:Generic PETG @MakerGear]
+inherits = *PET*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 27.82
+filament_density = 1.27
+filament_vendor = Generic
+
+
@@ -0,0 +1,8 @@
+[filament:Hatchbox ABS @MakerGear]
+inherits = *ABS*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 27.82
+filament_density = 1.04
+filament_spool_weight = 245
+filament_vendor = Hatchbox
+
@@ -0,0 +1,8 @@
+[filament:Hatchbox PETG @MakerGear]
+inherits = *PET*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 27.90
+filament_density = 1.27
+filament_spool_weight = 235
+filament_vendor = Hatchbox
+
@@ -0,0 +1,7 @@
+[filament:Hatchbox PLA @MakerGear]
+inherits = *PLA*
+filament_cost = 25.4
+filament_density = 1.27
+filament_spool_weight = 245
+filament_vendor = Hatchbox
+
@@ -0,0 +1,8 @@
+[filament:Inland PETG @MakerGear]
+inherits = *PET*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 27.90
+filament_density = 1.27
+filament_spool_weight = 235
+filament_vendor = Inland
+
@@ -0,0 +1,7 @@
+[filament:Inland PLA @MakerGear]
+inherits = *PLA*
+filament_cost = 25.4
+filament_density = 1.24
+filament_spool_weight = 265
+filament_vendor = Inland
+
@@ -0,0 +1,9 @@
+[filament:MakerGear ABS @MakerGear]
+inherits = *ABS*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+cooling = 0
+filament_colour = #DDDDDD
+filament_density = 1.04
+filament_type = ABS
+filament_vendor = MakerGear
+
@@ -0,0 +1,8 @@
+[filament:MakerGear PLA @MakerGear]
+inherits = *PLA*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes!~/.*PRINTER_MODEL_MAKERGEAR_MICRO.*/
+filament_cost = 25.4
+filament_density = 1.24
+filament_vendor = MakerGear
+
+
@@ -0,0 +1,21 @@
+[filament:MakerGear PLA @MakerGear_Micro]
+inherits = *PLA*
+bed_temperature = 
+bridge_fan_speed = 0
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_MICRO.*/
+cooling = 0
+disable_fan_first_layers = 
+fan_always_on = 0
+fan_below_layer_time = 
+filament_colour = #DDDDDD
+filament_cost = 20
+filament_density = 1.24
+filament_max_volumetric_speed = 10
+filament_type = PLA
+filament_vendor = MakerGear
+first_layer_bed_temperature = 0
+first_layer_temperature = 210
+max_fan_speed = 
+min_fan_speed = 
+temperature = 205
+
@@ -0,0 +1,7 @@
+[filament:MakerGear Translucent PLA @MakerGear]
+inherits = MakerGear PLA @MakerGear
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/
+filament_cost = 25.4
+filament_density = 1.24
+filament_vendor = MakerGear
+
@@ -0,0 +1,11 @@
+[filament:MatterHackers PETG @MakerGear]
+inherits = *PET*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 27.90
+filament_density = 1.27
+filament_spool_weight = 235
+filament_vendor = MatterHackers
+
+# ---------------------------
+# Nylon Filament
+# ---------------------------
@@ -0,0 +1,10 @@
+[filament:MatterHackers PLA @MakerGear]
+inherits = *PLA*
+filament_cost = 25.4
+filament_density = 1.24
+filament_spool_weight = 265
+filament_vendor = MatterHackers
+
+# ---------------------------
+# ABS Filament
+# ---------------------------
@@ -0,0 +1,8 @@
+[filament:Overture PETG @MakerGear]
+inherits = *PET*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 27.90
+filament_density = 1.27
+filament_spool_weight = 235
+filament_vendor = Overture
+
@@ -0,0 +1,7 @@
+[filament:Overture PLA @MakerGear]
+inherits = *PLA*
+filament_cost = 22
+filament_density = 1.24
+filament_spool_weight = 235
+filament_vendor = Overture
+
@@ -0,0 +1,23 @@
+[filament:PolyMaker PolySmooth @MakerGear]
+inherits = *PLA*
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+cooling = 1
+disable_fan_first_layers = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #666666
+filament_cost = 20
+filament_density = 1.24
+filament_max_volumetric_speed = 10
+filament_retract_length = 1
+filament_retract_speed = 25
+filament_type = Misc
+filament_vendor = PolyMaker
+first_layer_bed_temperature = 55
+first_layer_temperature = 215
+max_fan_speed = 100
+min_fan_speed = 100
+temperature = 210
+
@@ -0,0 +1,30 @@
+[filament:SainSmart TPU @MakerGear]
+inherits = *FLEX*
+bed_temperature = 50
+bridge_fan_speed = 100
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+cooling = 1
+disable_fan_first_layers = 4
+extrusion_multiplier = 1.1
+fan_always_on = 1
+filament_cost = 32.99
+filament_density = 1.21
+filament_deretract_speed = 25
+filament_max_volumetric_speed = 2.5
+filament_retract_before_travel = 3
+filament_retract_length = 1
+filament_retract_lift = 0
+filament_retract_speed = nil
+filament_vendor = SainSmart
+filament_wipe = 0
+first_layer_bed_temperature = 50
+first_layer_temperature = 230
+full_fan_speed_layer = 6
+max_fan_speed = 80
+min_fan_speed = 80
+min_print_speed = 15
+temperature = 230
+
+# ---------------------------
+# Misc Filament
+# ---------------------------
@@ -0,0 +1,7 @@
+[filament:Verbatim ABS @MakerGear]
+inherits = *ABS*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 25.87
+filament_density = 1.05
+filament_vendor = Verbatim
+
@@ -0,0 +1,8 @@
+[filament:Verbatim PETG @MakerGear]
+inherits = *PET*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+filament_cost = 27.90
+filament_density = 1.27
+filament_spool_weight = 235
+filament_vendor = Verbatim
+
@@ -0,0 +1,21 @@
+[filament:*ABS*]
+inherits = *common*
+bed_temperature = 100
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 0
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #DDDDDD
+filament_cost = 20
+filament_density = 1.04
+filament_max_volumetric_speed = 11
+filament_type = ABS
+first_layer_bed_temperature = 110
+first_layer_temperature = 250
+max_fan_speed = 0
+min_fan_speed = 0
+temperature = 245
+top_fan_speed = 0
+
@@ -0,0 +1,15 @@
+[filament:*EMPTY*]
+inherits = *common*
+bed_temperature = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2_DUAL|3_ID)).*/
+filament_colour = #DDDDDD
+filament_cost = 0
+filament_density = 0
+filament_type = EMPTY
+first_layer_bed_temperature = 
+first_layer_temperature = 0
+temperature = 0
+
+# ---------------------------
+# PLA Filament
+# ---------------------------
@@ -0,0 +1,23 @@
+[filament:*FLEX*]
+inherits = *common*
+bed_temperature = 50
+bridge_fan_speed = 80
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1.15
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #008000
+filament_deretract_speed = 25
+filament_max_volumetric_speed = 2
+filament_retract_length = 0.8
+filament_retract_lift = 0
+filament_type = FLEX
+filament_wipe = 0
+first_layer_bed_temperature = 55
+first_layer_temperature = 245
+max_fan_speed = 90
+min_fan_speed = 70
+slowdown_below_layer_time = 10
+temperature = 240
+
@@ -0,0 +1,21 @@
+[filament:*PET*]
+inherits = *common*
+bed_temperature = 70
+bridge_fan_speed = 100
+cooling = 1
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+disable_fan_first_layers = 2
+extrusion_multiplier = 0.98
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #DDDDDD
+filament_cost = 30
+filament_density = 1.27
+filament_max_volumetric_speed = 8
+filament_type = PETG
+first_layer_bed_temperature = 70
+first_layer_temperature = 250
+max_fan_speed = 80
+min_fan_speed = 40
+temperature = 245
+
@@ -0,0 +1,20 @@
+[filament:*PLA*]
+inherits = *common*
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(ICRO|2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/
+cooling = 1
+disable_fan_first_layers = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #DDDDDD
+filament_cost = 20
+filament_density = 1.24
+filament_max_volumetric_speed = 15
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+max_fan_speed = 100
+min_fan_speed = 100
+temperature = 210
+
@@ -0,0 +1,13 @@
+[filament:*common*]
+compatible_printers = 
+cooling = 0
+extrusion_multiplier = 0.9
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_print_speed = 15
+slowdown_below_layer_time = 20
+
@@ -0,0 +1,629 @@
+{
+  "repo": {
+    "id": "non-prusa-fff",
+    "name": "Other FFF",
+    "description": "FFF Printers by other vendors",
+    "visibility": ""
+  },
+  "vendor": "MakerGear",
+  "version": "1.1.0",
+  "index_name": "MakerGear.idx",
+  "section_order": [
+    {
+      "type": "vendor",
+      "name": "vendor",
+      "path": "vendor/vendor.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "MAKERGEAR_MICRO",
+      "path": "printer_model/MAKERGEAR_MICRO.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "MAKERGEAR_M2",
+      "path": "printer_model/MAKERGEAR_M2.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "MAKERGEAR_M2_DUAL",
+      "path": "printer_model/MAKERGEAR_M2_DUAL.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "MAKERGEAR_M3_SE",
+      "path": "printer_model/MAKERGEAR_M3_SE.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "MAKERGEAR_M3_ID_0",
+      "path": "printer_model/MAKERGEAR_M3_ID_0.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "MAKERGEAR_M3_ID_0_DUPLICATION",
+      "path": "printer_model/MAKERGEAR_M3_ID_0_DUPLICATION.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "MAKERGEAR_M3_ID_1",
+      "path": "printer_model/MAKERGEAR_M3_ID_1.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "MAKERGEAR_M3_ID_1_DUPLICATION",
+      "path": "printer_model/MAKERGEAR_M3_ID_1_DUPLICATION.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "MAKERGEAR_U1",
+      "path": "printer_model/MAKERGEAR_U1.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "MAKERGEAR_U1_DUPLICATION",
+      "path": "printer_model/MAKERGEAR_U1_DUPLICATION.ini"
+    },
+    {
+      "type": "print",
+      "name": "*common*",
+      "path": "print/_common_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.25nozzle*",
+      "path": "print/_0.25nozzle_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.40nozzle*",
+      "path": "print/_0.40nozzle_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.50nozzle*",
+      "path": "print/_0.50nozzle_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.75nozzle*",
+      "path": "print/_0.75nozzle_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.05mm*",
+      "path": "print/_0.05mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.07mm*",
+      "path": "print/_0.07mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.10mm*",
+      "path": "print/_0.10mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.10mm Fine @0.35 nozzle MakerGear",
+      "path": "print/0.10mm Fine @0.35 nozzle MakerGear.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.15mm*",
+      "path": "print/_0.15mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.15mm Normal @0.25 nozzle MakerGear",
+      "path": "print/0.15mm Normal @0.25 nozzle MakerGear.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.15mm Quality @0.35 nozzle MakerGear",
+      "path": "print/0.15mm Quality @0.35 nozzle MakerGear.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.15mm Quality @0.40 nozzle MakerGear",
+      "path": "print/0.15mm Quality @0.40 nozzle MakerGear.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.20mm*",
+      "path": "print/_0.20mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.20mm Quality @0.50 nozzle MakerGear",
+      "path": "print/0.20mm Quality @0.50 nozzle MakerGear.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.20mm Normal @0.35 nozzle MakerGear",
+      "path": "print/0.20mm Normal @0.35 nozzle MakerGear.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.20mm Normal @0.40 Nozzle MakerGear",
+      "path": "print/0.20mm Normal @0.40 Nozzle MakerGear.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.25mm*",
+      "path": "print/_0.25mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.25mm Speed @0.35 nozzle MakerGear",
+      "path": "print/0.25mm Speed @0.35 nozzle MakerGear.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.25mm Fast @0.40 nozzle MakerGear",
+      "path": "print/0.25mm Fast @0.40 nozzle MakerGear.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.25mm Normal @0.50 nozzle MakerGear",
+      "path": "print/0.25mm Normal @0.50 nozzle MakerGear.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.25mm Quality @0.75 nozzle MakerGear",
+      "path": "print/0.25mm Quality @0.75 nozzle MakerGear.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.30mm*",
+      "path": "print/_0.30mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.30mm Speed @0.50 nozzle MakerGear",
+      "path": "print/0.30mm Speed @0.50 nozzle MakerGear.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.30mm Normal @0.75 nozzle MakerGear",
+      "path": "print/0.30mm Normal @0.75 nozzle MakerGear.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.35mm*",
+      "path": "print/_0.35mm_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.35mm Speed @0.75 nozzle MakerGear",
+      "path": "print/0.35mm Speed @0.75 nozzle MakerGear.ini"
+    },
+    {
+      "type": "print",
+      "name": "*0.40mm*",
+      "path": "print/_0.40mm_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*common*",
+      "path": "filament/_common_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*PLA*",
+      "path": "filament/_PLA_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*PET*",
+      "path": "filament/_PET_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*ABS*",
+      "path": "filament/_ABS_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*FLEX*",
+      "path": "filament/_FLEX_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*EMPTY*",
+      "path": "filament/_EMPTY_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "MakerGear PLA @MakerGear",
+      "path": "filament/MakerGear PLA @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "MakerGear Translucent PLA @MakerGear",
+      "path": "filament/MakerGear Translucent PLA @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "MakerGear PLA @MakerGear_Micro",
+      "path": "filament/MakerGear PLA @MakerGear_Micro.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Fiberlogy PLA @MakerGear",
+      "path": "filament/Fiberlogy PLA @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "AmazonBasics PLA @MakerGear",
+      "path": "filament/AmazonBasics PLA @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Overture PLA @MakerGear",
+      "path": "filament/Overture PLA @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Hatchbox PLA @MakerGear",
+      "path": "filament/Hatchbox PLA @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Fillamentum PLA @MakerGear",
+      "path": "filament/Fillamentum PLA @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Esun PLA @MakerGear",
+      "path": "filament/Esun PLA @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Inland PLA @MakerGear",
+      "path": "filament/Inland PLA @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "MatterHackers PLA @MakerGear",
+      "path": "filament/MatterHackers PLA @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "MakerGear ABS @MakerGear",
+      "path": "filament/MakerGear ABS @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Esun ABS @MakerGear",
+      "path": "filament/Esun ABS @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Hatchbox ABS @MakerGear",
+      "path": "filament/Hatchbox ABS @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Verbatim ABS @MakerGear",
+      "path": "filament/Verbatim ABS @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Fillamentum ABS @MakerGear",
+      "path": "filament/Fillamentum ABS @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "E3D PC-ABS @MakerGear",
+      "path": "filament/E3D PC-ABS @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Fillamentum ASA @MakerGear",
+      "path": "filament/Fillamentum ASA @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Fiberlogy ASA @MakerGear",
+      "path": "filament/Fiberlogy ASA @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Verbatim PETG @MakerGear",
+      "path": "filament/Verbatim PETG @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Fiberlogy PETG @MakerGear",
+      "path": "filament/Fiberlogy PETG @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Esun PETG @MakerGear",
+      "path": "filament/Esun PETG @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Overture PETG @MakerGear",
+      "path": "filament/Overture PETG @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "3DxTech PETG @MakerGear",
+      "path": "filament/3DxTech PETG @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Hatchbox PETG @MakerGear",
+      "path": "filament/Hatchbox PETG @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Inland PETG @MakerGear",
+      "path": "filament/Inland PETG @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "MatterHackers PETG @MakerGear",
+      "path": "filament/MatterHackers PETG @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Fiberlogy Nylon PA12 @MakerGear",
+      "path": "filament/Fiberlogy Nylon PA12 @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Fiberlogy Nylon PA12+CF15 @MakerGear",
+      "path": "filament/Fiberlogy Nylon PA12+CF15 @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "AmazonBasics TPU @MakerGear",
+      "path": "filament/AmazonBasics TPU @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "SainSmart TPU @MakerGear",
+      "path": "filament/SainSmart TPU @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "PolyMaker PolySmooth @MakerGear",
+      "path": "filament/PolyMaker PolySmooth @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Empty @MakerGear",
+      "path": "filament/Empty @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic ABS @MakerGear",
+      "path": "filament/Generic ABS @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic PETG @MakerGear",
+      "path": "filament/Generic PETG @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic ASA @MakerGear",
+      "path": "filament/Generic ASA @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic FLEX @MakerGear",
+      "path": "filament/Generic FLEX @MakerGear.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic HIPS @MakerGear",
+      "path": "filament/Generic HIPS @MakerGear.ini"
+    },
+    {
+      "type": "printer",
+      "name": "*default*",
+      "path": "printer/_default_.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear Micro",
+      "path": "printer/MakerGear Micro.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M2 (V4 Hotend)",
+      "path": "printer/MakerGear M2 (V4 Hotend).ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M2 0.25 Nozzle",
+      "path": "printer/MakerGear M2 0.25 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M2 0.50 Nozzle",
+      "path": "printer/MakerGear M2 0.50 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M2 0.75 Nozzle",
+      "path": "printer/MakerGear M2 0.75 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M2 Dual",
+      "path": "printer/MakerGear M2 Dual.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M2 Dual 0.25 Nozzle",
+      "path": "printer/MakerGear M2 Dual 0.25 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M2 Dual 0.50 Nozzle",
+      "path": "printer/MakerGear M2 Dual 0.50 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M2 Dual 0.75 Nozzle",
+      "path": "printer/MakerGear M2 Dual 0.75 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Single Extruder",
+      "path": "printer/MakerGear M3 Single Extruder.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Single Extruder 0.25 Nozzle",
+      "path": "printer/MakerGear M3 Single Extruder 0.25 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Single Extruder 0.50 Nozzle",
+      "path": "printer/MakerGear M3 Single Extruder 0.50 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Single Extruder 0.75 Nozzle",
+      "path": "printer/MakerGear M3 Single Extruder 0.75 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.0",
+      "path": "printer/MakerGear M3 Independent Dual Rev.0.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.0 0.25 Nozzle",
+      "path": "printer/MakerGear M3 Independent Dual Rev.0 0.25 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.0 0.50 Nozzle",
+      "path": "printer/MakerGear M3 Independent Dual Rev.0 0.50 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.0 0.75 Nozzle",
+      "path": "printer/MakerGear M3 Independent Dual Rev.0 0.75 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.0 (Duplication Mode)",
+      "path": "printer/MakerGear M3 Independent Dual Rev.0 (Duplication Mode).ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.0 0.25 Nozzle (Duplication Mode)",
+      "path": "printer/MakerGear M3 Independent Dual Rev.0 0.25 Nozzle (Duplication Mode).ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.0 0.50 Nozzle (Duplication Mode)",
+      "path": "printer/MakerGear M3 Independent Dual Rev.0 0.50 Nozzle (Duplication Mode).ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.0 0.75 Nozzle (Duplication Mode)",
+      "path": "printer/MakerGear M3 Independent Dual Rev.0 0.75 Nozzle (Duplication Mode).ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.1",
+      "path": "printer/MakerGear M3 Independent Dual Rev.1.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.1 0.25 Nozzle",
+      "path": "printer/MakerGear M3 Independent Dual Rev.1 0.25 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.1 0.50 Nozzle",
+      "path": "printer/MakerGear M3 Independent Dual Rev.1 0.50 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.1 0.75 Nozzle",
+      "path": "printer/MakerGear M3 Independent Dual Rev.1 0.75 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.1 (Duplication Mode)",
+      "path": "printer/MakerGear M3 Independent Dual Rev.1 (Duplication Mode).ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.1 0.25 Nozzle (Duplication Mode)",
+      "path": "printer/MakerGear M3 Independent Dual Rev.1 0.25 Nozzle (Duplication Mode).ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.1 0.50 Nozzle (Duplication Mode)",
+      "path": "printer/MakerGear M3 Independent Dual Rev.1 0.50 Nozzle (Duplication Mode).ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear M3 Independent Dual Rev.1 0.75 Nozzle (Duplication Mode)",
+      "path": "printer/MakerGear M3 Independent Dual Rev.1 0.75 Nozzle (Duplication Mode).ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear Ultra One",
+      "path": "printer/MakerGear Ultra One.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear Ultra One 0.25 Nozzle",
+      "path": "printer/MakerGear Ultra One 0.25 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear Ultra One 0.35 Nozzle",
+      "path": "printer/MakerGear Ultra One 0.35 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear Ultra One 0.75 Nozzle",
+      "path": "printer/MakerGear Ultra One 0.75 Nozzle.ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear Ultra One (Duplication Mode)",
+      "path": "printer/MakerGear Ultra One (Duplication Mode).ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear Ultra One 0.25 Nozzle (Duplication Mode)",
+      "path": "printer/MakerGear Ultra One 0.25 Nozzle (Duplication Mode).ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear Ultra One 0.35 Nozzle (Duplication Mode)",
+      "path": "printer/MakerGear Ultra One 0.35 Nozzle (Duplication Mode).ini"
+    },
+    {
+      "type": "printer",
+      "name": "MakerGear Ultra One 0.75 Nozzle (Duplication Mode)",
+      "path": "printer/MakerGear Ultra One 0.75 Nozzle (Duplication Mode).ini"
+    }
+  ],
+  "asset_paths": [
+    "M2_M3.stl",
+    "M2_M3.svg",
+    "MAKERGEAR_M2_DUAL_thumbnail.png",
+    "MAKERGEAR_M2_thumbnail.png",
+    "MAKERGEAR_M3_DUPLICATION_thumbnail.png",
+    "MAKERGEAR_M3_SE_thumbnail.png",
+    "MAKERGEAR_M3_thumbnail.png",
+    "MAKERGEAR_MICRO_thumbnail.png",
+    "MAKERGEAR_U1_thumbnail.png"
+  ]
+}
@@ -0,0 +1,17 @@
+[print:0.10mm Fine @0.35 nozzle MakerGear]
+inherits = *0.10mm*
+bridge_speed = 40
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.35
+external_perimeter_speed = 45
+fill_density = 15%
+fill_pattern = 3dhoneycomb
+infill_acceleration = 1000
+infill_speed = 55
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+
+# ---------------------------
+# 0.15mm
+# ---------------------------
@@ -0,0 +1,5 @@
+[print:0.15mm Normal @0.25 nozzle MakerGear]
+inherits = *0.15mm*; *0.25nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.25
+
+# M2, M3, U1
@@ -0,0 +1,6 @@
+[print:0.15mm Quality @0.35 nozzle MakerGear]
+inherits = *0.15mm*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.35
+bridge_flow_ratio = 0.95
+
+# Micro
@@ -0,0 +1,8 @@
+[print:0.15mm Quality @0.40 nozzle MakerGear]
+inherits = *0.15mm*; *0.40nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_MICRO.*/ and nozzle_diameter[0]==0.40
+first_layer_height = 0.2
+
+# ---------------------------
+# 0.20mm
+# ---------------------------
@@ -0,0 +1,6 @@
+[print:0.20mm Normal @0.35 nozzle MakerGear]
+inherits = *0.20mm*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.35
+bridge_flow_ratio = 0.95
+
+# Micro
@@ -0,0 +1,8 @@
+[print:0.20mm Normal @0.40 Nozzle MakerGear]
+inherits = *0.20mm*; *0.40nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_MICRO.*/ and nozzle_diameter[0]==0.40
+perimeters = 3
+
+# ---------------------------
+# 0.25mm (Testing)
+# ---------------------------
@@ -0,0 +1,5 @@
+[print:0.20mm Quality @0.50 nozzle MakerGear]
+inherits = *0.20mm*; *0.50nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.50
+
+# M2, M3, U1
@@ -0,0 +1,6 @@
+[print:0.25mm Fast @0.40 nozzle MakerGear]
+inherits = *0.25mm*; *0.40nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_MICRO.*/ and nozzle_diameter[0]==0.40
+perimeters = 3
+
+# M2, M3, U1
@@ -0,0 +1,6 @@
+[print:0.25mm Normal @0.50 nozzle MakerGear]
+inherits = *0.25mm*; *0.50nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.50
+first_layer_height = 0.26
+
+# M2, M3, U1
@@ -0,0 +1,7 @@
+[print:0.25mm Quality @0.75 nozzle MakerGear]
+inherits = *0.25mm*; *0.75nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.75
+
+# ---------------------------
+# 0.30mm
+# ---------------------------
@@ -0,0 +1,13 @@
+[print:0.25mm Speed @0.35 nozzle MakerGear]
+inherits = *0.25mm*
+bridge_speed = 60
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.35
+external_perimeter_speed = 70
+infill_acceleration = 2000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 75
+solid_infill_speed = 200
+top_solid_infill_speed = 70
+
+# Micro
@@ -0,0 +1,7 @@
+[print:0.30mm Normal @0.75 nozzle MakerGear]
+inherits = *0.30mm*; *0.75nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.75
+
+# ---------------------------
+# 0.35mm (Testing)
+# ---------------------------
@@ -0,0 +1,6 @@
+[print:0.30mm Speed @0.50 nozzle MakerGear]
+inherits = *0.30mm*; *0.50nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.50
+first_layer_height = 0.22
+
+# M2, M3, U1
@@ -0,0 +1,7 @@
+[print:0.35mm Speed @0.75 nozzle MakerGear]
+inherits = *0.35mm*; *0.75nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.75
+
+# ---------------------------
+# 0.40mm (NOT READY)
+# ---------------------------
@@ -0,0 +1,32 @@
+[print:*0.05mm*]
+inherits = *common*
+bottom_solid_layers = 10
+bridge_acceleration = 300
+bridge_flow_ratio = 0.7
+default_acceleration = 1000
+external_perimeter_speed = 20
+fill_density = 15%
+first_layer_acceleration = 500
+gap_fill_speed = 20
+infill_acceleration = 800
+infill_speed = 30
+layer_height = 0.05
+max_print_speed = 80
+perimeter_acceleration = 300
+perimeter_speed = 30
+perimeters = 3
+small_perimeter_speed = 20
+solid_infill_speed = 30
+support_material_extrusion_width = 0.3
+support_material_spacing = 1.5
+support_material_speed = 30
+top_solid_infill_speed = 20
+top_solid_layers = 15
+
+# [print:NOT READY 0.05mm ULTRAFINE @0.25 nozzle] # M2, M3, U1
+# inherits = *0.05mm*; *0.25nozzle*
+# compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.25
+
+# ---------------------------
+# 0.07mm (Testing)
+# ---------------------------
@@ -0,0 +1,33 @@
+[print:*0.07mm*]
+inherits = *common*
+bottom_solid_layers = 8
+bridge_acceleration = 300
+bridge_flow_ratio = 0.7
+bridge_speed = 20
+default_acceleration = 1000
+external_perimeter_speed = 20
+fill_density = 15%
+first_layer_acceleration = 500
+gap_fill_speed = 20
+infill_acceleration = 800
+infill_speed = 40
+layer_height = 0.07
+max_print_speed = 80
+perimeter_acceleration = 300
+perimeter_speed = 30
+perimeters = 3
+small_perimeter_speed = 20
+solid_infill_speed = 40
+support_material_extrusion_width = 0.3
+support_material_spacing = 1.5
+support_material_speed = 40
+top_solid_infill_speed = 30
+top_solid_layers = 11
+
+# [print:NOT READY  0.07mm Quality @0.25 nozzle] # M2, M3, U1
+# inherits = *0.07mm*; *0.25nozzle*
+# compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.25
+
+# ---------------------------
+# 0.10mm (Testing)
+# ---------------------------
@@ -0,0 +1,23 @@
+[print:*0.10mm*]
+inherits = *common*
+bottom_solid_layers = 7
+bridge_flow_ratio = 0.7
+bridge_speed = 20
+fill_density = 15%
+first_layer_speed = 25
+gap_fill_speed = 20
+infill_speed = 40
+layer_height = 0.1
+max_print_speed = 80
+perimeter_acceleration = 800
+perimeter_speed = 30
+perimeters = 3
+small_perimeter_speed = 20
+solid_infill_speed = 40
+support_material_extrusion_width = 0.3
+support_material_spacing = 1.5
+support_material_speed = 40
+top_solid_infill_speed = 30
+top_solid_layers = 9
+
+ # M2, M3, U1
@@ -0,0 +1,14 @@
+[print:*0.15mm*]
+inherits = *common*
+bottom_solid_layers = 5
+external_perimeter_speed = 40
+infill_acceleration = 2000
+infill_speed = 60
+layer_height = 0.15
+perimeter_acceleration = 800
+perimeter_speed = 50
+solid_infill_speed = 50
+top_infill_extrusion_width = 0.4
+top_solid_layers = 7
+
+ # M2, M3, U1
@@ -0,0 +1,12 @@
+[print:*0.20mm*]
+inherits = *common*
+bottom_solid_layers = 2
+bridge_flow_ratio = 0.9
+external_perimeter_speed = 60
+infill_speed = 65
+layer_height = 0.2
+perimeter_speed = 50
+solid_infill_speed = 50
+top_solid_layers = 3
+
+# M2, M3, U1
@@ -0,0 +1,11 @@
+[print:*0.25mm*]
+inherits = *common*
+bottom_solid_layers = 4
+bridge_flow_ratio = 0.95
+external_perimeter_speed = 40
+layer_height = 0.25
+perimeter_acceleration = 800
+perimeter_speed = 50
+top_solid_layers = 4
+
+# M2, M3, U1
@@ -0,0 +1,17 @@
+[print:*0.25nozzle*]
+elefant_foot_compensation = 0
+external_perimeter_extrusion_width = 0.30
+extrusion_width = 0.30
+first_layer_extrusion_width = 0.3
+infill_extrusion_width = 0.30
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeter_extrusion_width = 0.30
+solid_infill_extrusion_width = 0.30
+support_material_extrusion_width = 0.30
+support_material_interface_layers = 0
+support_material_interface_spacing = 0.15
+support_material_spacing = 1
+support_material_xy_spacing = 150%
+top_infill_extrusion_width = 0.30
+
+ ; Only for the MakerGear Micro 
@@ -0,0 +1,17 @@
+[print:*0.30mm*]
+inherits = *common*
+bottom_solid_layers = 3
+bridge_flow_ratio = 0.95
+external_perimeter_speed = 75
+first_layer_height = 0.24
+gap_fill_speed = 40
+infill_speed = 80
+layer_height = 0.3
+perimeter_speed = 65
+small_perimeter_speed = 35
+solid_infill_speed = 50
+support_material_contact_distance = 0.3
+top_infill_extrusion_width = 0.4
+top_solid_layers = 4
+
+ # M2, M3, U1
@@ -0,0 +1,22 @@
+[print:*0.35mm*]
+inherits = *common*
+bottom_solid_layers = 3
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 40
+first_layer_extrusion_width = 0.75
+infill_acceleration = 2000
+infill_speed = 60
+layer_height = 0.35
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 60
+top_solid_infill_speed = 50
+top_solid_layers = 4
+
+# [print:NOT READY 0.35mm Speed @0.50 nozzle MakerGear]
+#inherits = *0.35*; *0.50nozzle*
+# compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.50
+
+# M2, M3, U1
@@ -0,0 +1,31 @@
+[print:*0.40mm*]
+inherits = *common*
+bottom_solid_layers = 3
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 40
+first_layer_extrusion_width = 0.75
+infill_acceleration = 2000
+infill_speed = 60
+layer_height = 0.40
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 60
+top_solid_infill_speed = 50
+top_solid_layers = 4
+
+# [print:NOT READY 0.40mm Do_I_Want_To_Support_This @0.75 nozzle] # M2, M3, U1
+# inherits = *0.40mm*; *0.75nozzle*
+# compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.75
+
+
+# /~~~~~~~~~~~~~~~~~~~~~~~~~\
+# |~~~ Filament Settings ~~~|
+# \~~~~~~~~~~~~~~~~~~~~~~~~~/
+# When submitting new filaments please print the following temperature tower at 0.1mm layer height:
+#   https://www.thingiverse.com/thing:2615842
+# Pay particular attention to bridging, overhangs and retractions.
+# Also print the following bed adhesion test at 0.1 layer height as well:
+#   https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
+
@@ -0,0 +1,32 @@
+[print:*0.40nozzle*]
+bottom_solid_min_thickness = 0.5
+bridge_speed = 55
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 35
+extrusion_width = 0.45
+first_layer_extrusion_width = 0.42
+infill_anchor_max = 15
+infill_extrusion_width = 0.45
+infill_speed = 40
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+overhangs = 1 
+perimeter_extrusion_width = 0.45
+perimeter_speed = 35
+small_perimeter_speed = 35
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 45
+support_material = 1
+support_material_auto = 1
+support_material_contact_distance = 0.3
+support_material_extrusion_width = 0.45
+support_material_interface_layers = 1
+support_material_interface_spacing = 0.3
+support_material_spacing = 2.5
+support_material_speed = 35
+support_material_threshold = 60
+support_material_with_sheath = 1
+support_material_xy_spacing = 80%
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 25
+top_solid_min_thickness = 0.7
+
@@ -0,0 +1,17 @@
+[print:*0.50nozzle*]
+bottom_solid_min_thickness = 0.5
+external_perimeter_extrusion_width = 0.60
+extrusion_width = 0.60
+first_layer_extrusion_width = 0.60
+infill_anchor_max = 15
+infill_extrusion_width = 0.60
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeter_extrusion_width = 0.60
+solid_infill_extrusion_width = 0.60
+support_material_contact_distance = 0.25
+support_material_extrusion_width = 0.60
+support_material_interface_spacing = 0.3
+support_material_xy_spacing = 180%
+top_infill_extrusion_width = 0.60
+top_solid_min_thickness = 0.8
+
@@ -0,0 +1,46 @@
+[print:*0.75nozzle*]
+bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 1000
+bridge_flow_ratio = 0.9
+bridge_speed = 22
+default_acceleration = 1000
+external_perimeter_extrusion_width = 0.84
+extrusion_width = 0.84
+fill_density = 10%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.94
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 20
+infill_acceleration = 1000
+infill_anchor_max = 20
+infill_extrusion_width = 0.84
+infill_speed = 85
+infill_overlap = 25%
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.84
+single_extruder_multi_material_priming = 0
+skirt_distance = 3
+skirt_height = 2
+solid_infill_speed = 55
+solid_infill_extrusion_width = 0.84
+support_material_contact_distance = 0.3
+support_material_extrusion_width = 0.7
+support_material_interface_spacing = 0.4
+support_material_interface_speed = 175%
+support_material_spacing = 2
+support_material_threshold = 50
+support_material_xy_spacing = 200%
+top_infill_extrusion_width = 0.8
+top_solid_layers = 4
+top_solid_min_thickness = 1.2
+
+# /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
+# |~~~ Layer Height Settings ~~~|
+# \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
+# ---------------------------
+#      (not used) 0.05mm
+# ---------------------------
@@ -0,0 +1,102 @@
+[print:*common*]
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 65
+brim_width = 0
+brim_type = outer_only
+clip_multipart_objects = 1
+complete_objects = 0
+dont_support_bridges = 0
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.42
+external_perimeter_speed = 80
+external_perimeters_first = 1
+extra_perimeters = 1
+extrusion_width = 0.42
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.16
+first_layer_speed = 35
+gap_fill_speed = 30
+gcode_comments = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.42
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 90
+interface_shells = 0
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+overhangs = 1
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.42
+perimeter_generator = arachne
+perimeter_speed = 65
+perimeters = 2
+raft_first_layer_density = 60
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 1
+skirts = 3
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.42
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 50
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.25
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.42
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.3
+support_material_interface_speed = 100%
+support_material_pattern = honeycomb
+support_material_spacing = 2
+support_material_speed = 60
+support_material_style = snug
+support_material_synchronize_layers = 0
+support_material_threshold = 65
+support_material_with_sheath = 0
+support_material_xy_spacing = 200%
+thin_walls = 1
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0.42
+top_solid_infill_speed = 35
+travel_speed = 150
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 40
+xy_size_compensation = 0
+
+# /~~~~~~~~~~~~~~~~~~~~~~~\
+# |~~~ Nozzle Variants ~~~|
+# \~~~~~~~~~~~~~~~~~~~~~~~/
@@ -0,0 +1,28 @@
+[printer:MakerGear M2 (V4 Hotend)]
+inherits = *default*
+bed_shape = 0x0,200x0,200x251,0x251
+default_filament_profile = "MakerGear PLA @MakerGear"
+default_print_profile = 0.20mm Normal @0.35 nozzle MakerGear
+end_gcode = M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nG91 ; relative mode\nG1 Z10 ; lift 10mm\nG90 ; absolute mode\nG28 X0 ; home X axis\nM84 ; disable motors
+machine_max_acceleration_e = 2000, 2000
+machine_max_acceleration_extruding = 2000, 2000
+machine_max_acceleration_retracting = 3000, 3000
+machine_max_acceleration_x = 2000, 2000
+machine_max_acceleration_y = 2000, 2000
+machine_max_acceleration_z = 2000, 2000
+machine_max_feedrate_e = 25, 25
+machine_max_feedrate_x = 200, 200
+machine_max_feedrate_y = 200, 200
+machine_max_feedrate_z = 25, 25
+machine_max_jerk_e = 1, 1
+machine_max_jerk_x = 4, 4
+machine_max_jerk_y = 4, 4
+machine_max_jerk_z = 0.4, 0.4
+max_print_height = 200
+nozzle_diameter = 0.35
+printer_model = MAKERGEAR_M2
+printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKERGEAR\nPRINTER_MODEL_MAKERGEAR_M2\n 
+printer_variant = 0.35
+start_gcode = M108 S255 ; turn on M2 fans\nG28 ; home all axes\nG1 Y50 F6000 ; move forward to avoid binder clips\nG1 X205 Z10 ; move off platform\nG1 Z0.4 ; position nozzle\nG92 E0 ; zero extruder\nM109 S[first_layer_temperature_[current_extruder]]\nG1 E25 F225 ; purge nozzle\nG92 E0 ; zero extruder\nG1 X190 Z0.1 E1.0 F1200 ; slow wipe\nG1 X180 Z0.25 ; lift\n
+# thumbnails = 16x16,220x124
+
@@ -0,0 +1,11 @@
+[printer:MakerGear M2 0.25 Nozzle]
+inherits = MakerGear M2 (V4 Hotend)
+default_print_profile = 0.15mm Normal @0.25 nozzle MakerGear
+max_layer_height = 0.15
+min_layer_height = 0.05
+nozzle_diameter = 0.25
+printer_variant = 0.25
+retract_length = 1
+retract_lift = 0.15
+retract_speed = 50
+
@@ -0,0 +1,8 @@
+[printer:MakerGear M2 0.50 Nozzle]
+inherits = MakerGear M2 (V4 Hotend)
+default_print_profile = 0.20mm Quality @0.50 nozzle MakerGear
+max_layer_height = 0.35
+min_layer_height = 0.1
+nozzle_diameter = 0.50
+printer_variant = 0.50
+
@@ -0,0 +1,13 @@
+[printer:MakerGear M2 0.75 Nozzle]
+inherits = MakerGear M2 (V4 Hotend)
+default_print_profile = 0.25mm Quality @0.75 nozzle MakerGear
+max_layer_height = 0.5
+min_layer_height = 0.15
+nozzle_diameter = 0.75
+printer_variant = 0.75
+retract_length = 1
+retract_speed = 35
+
+# -------------------------------
+# MakerGear M2 Dual
+# -------------------------------
@@ -0,0 +1,11 @@
+[printer:MakerGear M2 Dual 0.25 Nozzle]
+inherits = MakerGear M2 Dual
+default_print_profile = 0.15mm Normal @0.25 nozzle MakerGear
+max_layer_height = 0.15
+min_layer_height = 0.05
+nozzle_diameter = 0.25
+printer_variant = 0.25
+retract_length = 1
+retract_lift = 0.15
+retract_speed = 50
+
@@ -0,0 +1,8 @@
+[printer:MakerGear M2 Dual 0.50 Nozzle]
+inherits = MakerGear M2 Dual
+default_print_profile = 0.20mm Quality @0.50 nozzle MakerGear
+max_layer_height = 0.35
+min_layer_height = 0.1
+nozzle_diameter = 0.50
+printer_variant = 0.50
+
@@ -0,0 +1,13 @@
+[printer:MakerGear M2 Dual 0.75 Nozzle]
+inherits = MakerGear M2 Dual
+default_print_profile = 0.25mm Quality @0.75 nozzle MakerGear
+max_layer_height = 0.5
+min_layer_height = 0.15,0.15
+nozzle_diameter = 0.75,0.75
+printer_variant = 0.75
+retract_length = 1, 1
+retract_speed = 35, 35
+
+# ---------------------------
+# MakerGear M3-S3
+# ---------------------------
@@ -0,0 +1,29 @@
+[printer:MakerGear M2 Dual]
+inherits = *default*
+bed_shape = 0x0,200x0,200x251,0x251
+default_filament_profile = "MakerGear PLA @MakerGear"
+default_print_profile = 0.20mm Normal @0.35 nozzle MakerGear
+end_gcode = M104 S0 T1 ; turn off right extruder\nM104 S0 T0 ; turn off left extruder\nM140 S0 ; turn off bed\nG91 ; relative mode\nG1 Z10 ; lift 10mm\nG90 ; absolute mode\nG28 X0 ; home X axis\nM84 ; disable motors
+extruders_count = 2
+machine_max_acceleration_e = 2000, 2000
+machine_max_acceleration_extruding = 1000, 1000
+machine_max_acceleration_retracting = 2000, 2000
+machine_max_acceleration_x = 1200, 1200
+machine_max_acceleration_y = 1200, 1200
+machine_max_acceleration_z = 10, 10
+machine_max_feedrate_e = 30, 30
+machine_max_feedrate_x = 300, 300
+machine_max_feedrate_y = 300, 300
+machine_max_feedrate_z = 10, 10
+machine_max_jerk_e = 10, 10
+machine_max_jerk_x = 5, 5
+machine_max_jerk_y = 5, 5
+machine_max_jerk_z = 1, 1
+max_print_height = 200
+nozzle_diameter = 0.35,0.35
+printer_model = MAKERGEAR_M2_DUAL
+printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKERGEAR\nPRINTER_MODEL_MAKERGEAR_M2_DUAL\n 
+printer_variant = 0.35
+start_gcode = \nM108 S0 ; Turn on M2 fans\n; Turn off hotends to reduce ooze on the bed during startup\n; NOTE: this does not explicitly wait for the hotends to completely cool down\nM104 T0 S0\nM104 T1 S0\n\n{if first_layer_bed_temperature[1] < first_layer_bed_temperature[0]}\nM140 S{first_layer_bed_temperature[0]}     ; Set bed temperature\nM190 S{first_layer_bed_temperature[0]}	   ; Wait for bed to reach temperature\n{endif}\n\n{if first_layer_bed_temperature[0] < first_layer_bed_temperature[1]}\nM140 S{first_layer_bed_temperature[1]}     ; Set bed temperature\nM190 S{first_layer_bed_temperature[1]}	   ; Wait for bed to reach temperature\n{endif}\n\nT1 ; Switch to right extruder offsets for homing\nG28 ; Home all axes\nT0 ; Switch to left extruder\nG1 X0 Y50 F6000 ; Move forward to avoid binder clips\nG1 X200 Z10 F3600 ; Move off platform\n\n; Set hotend temperature\nM104 T0 S{first_layer_temperature[0]}\nM104 T1 S{first_layer_temperature[1]}\n\n; Wait for hotends to reach temperature\nM109 T0 S{first_layer_temperature[0]}\nM109 T1 S{first_layer_temperature[1]}\n\n\n{if temperature[1] == 0}\n; Single Mode - Left Purge script\n\nG1 Z0.4 ; Position nozzle above buildplate\nG92 E0 ; Zero extruder\nG1 E25 F225 ; Purge left extruder\nG92 E0 ; Zero extruder\nG1 X160 Z0.1 E1.0 F1200 ; Slow wipe\nG1 X140 Z0.25 ; Lift\n{endif}\n\n{if temperature[0] == 0}\n; Single Mode - Right Purge Script\n\nG1 Z0.4 ; Position nozzle above buildplate\nT1 ; Switch to right extruder\nG92 E0 ; Zero extruder\nG1 E25 F225 ; Purge right extruder\nG92 E0 ; Zero extruder\nG1 X160 Z0.1 E1.0 F1200 ; Slow wipe\nG1 X140 Z0.25 ; Lift\n{endif}\n\n{if temperature[0] > 0 and temperature[1] > 0}\n; Dual Mode - Purge Script\nG1 Z0.4 ; Position nozzle above buildplate\nG92 E0 ; Zero extruder\nG1 E25 F225 ; Purge left extruder\nG92 E0 ; Zero extruder\nT1 ; Set right extruder\nG1 E25 F225 ; Purge right extruder\nG92 E0 ; Zero extruder\nG1 X160 Z0.1 E1.0 F1200 ; Slow wipe\nG1 X140 Z0.25 ; Lift\nT0\nG92 E0 ; Zero extruder\n{endif}
+# thumbnails = 16x16,220x124
+
@@ -0,0 +1,12 @@
+[printer:MakerGear M3 Independent Dual Rev.0 (Duplication Mode)]
+inherits = MakerGear M3 Independent Dual Rev.0
+bed_shape = 0x0,100x0,100x251,0x251
+end_gcode = M605 S0 ; set to full independent control\nM104 S0 ; turn off extruder\nM104 S0 T0 ; turn off extruder\nM104 S0 T1 ; turn off extruder\nM140 S0 ; turn off bed\nM106 S0 ; turn off cooling fan\nG91 ; relative mode\nG1 Z20 ; move Z down 20mm if possible Max endstop will catch it if it is to far\nG90 ;  absolute mode\nG28 X ; home tools\nT0 ; default tool should always be T0\nG1 Y230 F10000 ; move build plate out\nM84 ; disable motors
+extruders_count = 1
+nozzle_diameter = 0.35
+printer_model = MAKERGEAR_M3_ID_0_DUPLICATION
+printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKERGEAR\nPRINTER_MODEL_MAKERGEAR_M3_ID_0_DUPLICATION\n 
+printer_variant = 0.35
+start_gcode = ;M3 ID Duplication Mode startup script\nM211 S1 ; turn on soft endstops to protect the machine\nM605 S0 ; set to full independent control on x axes\nG28 XYZ ; home without mesh level compensation\n\n; Set hotend temperature\nM104 T0 S{first_layer_temperature[0]}\nM104 T1 S{first_layer_temperature[0]}\n\n; Wait for hotend's to reach temperature\nM109 T0 S{first_layer_temperature[0]}\nM109 T1 S{first_layer_temperature[0]}\n\nT0 ; Make sure we're on T0\nM605 S2 R0 X100 ; set X to duplication mode 0 temperature difference 100 X difference\nG28 X ; home x axes to engange mode\nM211 S0 ; turn off soft endstops to let us move to back of the bed\nG1 X20 F1000 ; move to start x position\nG1 Y243 Z0.1 F10000 ; move off the bed and bring the bed up\nG92 E0 ; zero extruder\nG1 Y240 Z0.1 F1000 ; scrape off any ooze\nG1 Z0.30 F1000 ; lift\nG1 X80 E9.25 ; lift F1000 ; deposit extrusion line\nG1 Y239  E9.45 F1000 ; move  and extrude y\nG1 X30 E17.05 ; lift F1000 ; deposit extrusion line\nG1 X20 Z0.05 F1000 ; wipe off tail\nG1 Z10 Y223 ; lift to avoid clips and move back to safe bounds\nM400 ; wait for moves to finish before proceeding so that T1 doesn't get caught in a deadzone when switching back to Soft endstops on \n;\n;\nM211 S0 ; turn off soft endstops  \nG92 E0; zero extruder
+# thumbnails = 16x16,300x350
+
@@ -0,0 +1,11 @@
+[printer:MakerGear M3 Independent Dual Rev.0 0.25 Nozzle (Duplication Mode)]
+inherits = MakerGear M3 Independent Dual Rev.0 (Duplication Mode)
+default_print_profile = 0.15mm Normal @0.25 nozzle MakerGear
+max_layer_height = 0.15
+min_layer_height = 0.05
+nozzle_diameter = 0.25
+printer_variant = 0.25
+retract_length = 1
+retract_lift = 0.15
+retract_speed = 50
+
@@ -0,0 +1,11 @@
+[printer:MakerGear M3 Independent Dual Rev.0 0.25 Nozzle]
+inherits = MakerGear M3 Independent Dual Rev.0
+default_print_profile = 0.15mm Normal @0.25 nozzle MakerGear
+max_layer_height = 0.15,0.15
+min_layer_height = 0.05,0.05
+nozzle_diameter = 0.25,0.25
+printer_variant = 0.25
+retract_length = 1
+retract_lift = 0.15
+retract_speed = 50
+
@@ -0,0 +1,8 @@
+[printer:MakerGear M3 Independent Dual Rev.0 0.50 Nozzle (Duplication Mode)]
+inherits = MakerGear M3 Independent Dual Rev.0 (Duplication Mode)
+default_print_profile = 0.20mm Quality @0.50 nozzle MakerGear
+max_layer_height = 0.35
+min_layer_height = 0.1
+nozzle_diameter = 0.50
+printer_variant = 0.50
+
@@ -0,0 +1,8 @@
+[printer:MakerGear M3 Independent Dual Rev.0 0.50 Nozzle]
+inherits = MakerGear M3 Independent Dual Rev.0
+default_print_profile = 0.20mm Quality @0.50 nozzle MakerGear
+max_layer_height = 0.35,0.35
+min_layer_height = 0.1,0.1
+nozzle_diameter = 0.50,0.50
+printer_variant = 0.50
+
@@ -0,0 +1,13 @@
+[printer:MakerGear M3 Independent Dual Rev.0 0.75 Nozzle (Duplication Mode)]
+inherits = MakerGear M3 Independent Dual Rev.0 (Duplication Mode)
+default_print_profile = 0.25mm Quality @0.75 nozzle MakerGear
+max_layer_height = 0.5
+min_layer_height = 0.15
+nozzle_diameter = 0.75
+printer_variant = 0.75
+retract_length = 1
+retract_speed = 35
+
+# ------------------------------
+# MakerGear M3 Independent Dual Rev.1
+# ------------------------------
@@ -0,0 +1,13 @@
+[printer:MakerGear M3 Independent Dual Rev.0 0.75 Nozzle]
+inherits = MakerGear M3 Independent Dual Rev.0
+default_print_profile = 0.25mm Quality @0.75 nozzle MakerGear
+max_layer_height = 0.5,0.5
+min_layer_height = 0.15,0.15
+nozzle_diameter = 0.75,0.75
+printer_variant = 0.75
+retract_length = 1, 1
+retract_speed = 35, 35
+
+# -----------------------------------
+# MakerGear M3-ID (Duplication Mode)
+# -----------------------------------
@@ -0,0 +1,34 @@
+[printer:MakerGear M3 Independent Dual Rev.0]
+inherits = *default*
+bed_shape = 0x0,200x0,200x255,0x251
+default_filament_profile = "MakerGear PLA @MakerGear"
+default_print_profile = 0.20mm Normal @0.35 nozzle MakerGear
+end_gcode = M104 S0 ; turn off extruder\nM104 S0 T0 ; turn off extruder\nM104 S0 T1; turn off extruder\nM140 S0 ; turn off bed\nM106 S0 ; turn off cooling fan\nG91 ; relative mode\nG1 Z20 ; move Z down 20mm if possible Max endstop will catch it if it is to far\nG90;  absolute mode\nG28 X ; home tool/s\nT0 ; defualt tool should always be T0\nG1 Y230 F10000 ; move build plate out\nM84 ; disable motors
+extruders_count = 2
+extruder_offset = 0x0,0x0
+host_type = octoprint
+machine_max_acceleration_e = 2000, 2000
+machine_max_acceleration_extruding = 1000, 1000
+machine_max_acceleration_retracting = 2000, 2000
+machine_max_acceleration_x = 1200, 1200
+machine_max_acceleration_y = 1200, 1200
+machine_max_acceleration_z = 10, 10
+machine_max_feedrate_e = 30, 30
+machine_max_feedrate_x = 300, 300
+machine_max_feedrate_y = 300, 300
+machine_max_feedrate_z = 10, 10
+machine_max_jerk_e = 10, 10
+machine_max_jerk_x = 5, 5
+machine_max_jerk_y = 5, 5
+machine_max_jerk_z = 1, 1
+max_layer_height = 0.28,0.28
+max_print_height = 200
+nozzle_diameter = 0.35,0.35
+printer_model = MAKERGEAR_M3_ID_0_DUPLICATION
+printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKERGEAR\nPRINTER_MODEL_MAKERGEAR_M3_ID_0\n 
+printer_variant = 0.35
+retract_length_toolchange = 4,4
+start_gcode = ;M3 Independent Dual Startup Script\n\n; Turn off hotends to reduce ooze on the bed during startup\n; NOTE: this does not explicitly wait for the hotends to completely cool down\nM104 T0 S0\nM104 T1 S0\n\n{if first_layer_bed_temperature[1] < first_layer_bed_temperature[0]}\nM140 S{first_layer_bed_temperature[0]}     ; Set bed temperature\nM190 S{first_layer_bed_temperature[0]}	; Wait for bed to reach temperature\n{endif}\n\n{if first_layer_bed_temperature[0] < first_layer_bed_temperature[1]}\nM140 S{first_layer_bed_temperature[1]}     ; Set bed temperature\nM190 S{first_layer_bed_temperature[1]}	; Wait for bed to reach temperature\n{endif}\n\nM605 S0    ; Set to full independent control on x axes\nT0         ; Switch to left hotend\nG28        ; Home all axes probe/mesh if available\n\n; Set hotend temperature\nM104 T0 S{first_layer_temperature[0]}\nM104 T1 S{first_layer_temperature[1]}\n\n; Wait for hotends to reach temperature\nM109 T0 S{first_layer_temperature[0]}\nM109 T1 S{first_layer_temperature[1]}\n\n; Purge Scripts\n{if temperature[1] == 0}\n\n; Single Mode - Left Purge\nM211 S0 ; Turn off software endstops\nG1 X205 Y210 Z0.1 F10000 ; Move off the bed and bring the bed up\nG92 E0 ; Zero extruder\nG1 X195 Z0.1 F1000 ; Scrape off any ooze\nG1 Z10 ; Lift bed\nG1 X160 Y240 F10000 ; move to unused front edge\nG1 Z0.30 F1000\nG1 X40 E20 F1000\nG1 X30 Z0.05 F1000 ; wipe off tail\nG1 Z10\nG92 E0{endif}\n\n{if temperature[0] == 0}\n; Single Mode - Right Purge\nM211 S0 ; Turn off software endstops for purge moves\nG1 X25 F9000 ; Move T0 past bedclips as to not damage probe\nT1 ; Switch to right hotend\nG1 X205 Y210 Z0.1 F10000 ; Move off the bed and bring the bed up\nG92 E0 ; Zero extruder\nG1 X195 Z0.1 F1000 ; Scrape off any ooze\nG1 Z10 ; Lift\nG1 X100 Y240 F10000 ; Move to unused front edge\nG1 Z0.30 F1000\nG1 X180 E9.25  F1000 ; Deposit extrusion line\nG1 Y239  E9.45 F1000 ; Move Y-axis and extrude\nG1 X130 E17.05; lift \nF1000 ; deposit extrusion line\nG1 X120 Z0.05 F1000 ; wipe off tail\nG92 E0; zero extruder\nG1 Z10 Y230 ; move back to safe bounds\nT0\nG1 X-20.77 ; move T0 back home\nT1{endif}\n\n{if temperature[0] > 0 and temperature[1] > 0}\n; M3-ID T0/T1 Starting Script\nG1 X25 F9000; move T0 past bedclips as to not damage probe\n\nT1 ; Switch to right extruder\nG1 X215 Y210 Z0.1 F10000 ; move off the bed and bring the bed up\nG92 E0 ; zero extruder\nG1 X195 Z0.1 F1000; scrape off any ooze\nG1 Z10 ; lift\nM211 S0 ; turn off soft endstops for purge moves\nG1 X100 Y240 F10000; move to unused back edge\nG1 Z0.30 F1000\nG1 X180 E9.25  F1000; deposit extrusion line\nG1 Y239  E9.45 F1000 ; move  and extrude y\nG1 X130 E17.05; lift F1000; deposit extrusion line\nG1 X100 Z0.05 F1000 ; wipe off tail\nG92 E0; zero extruder\nG1 Z10 Y225 ; move back to safe bounds\nG1 X252 F4800; move T1 home\n\nT0;\nG1 X205 Y210 Z0.1 F10000 ; move off the bed and bring the bed up\nG92 E0 ; zero extruder\nG1 X195 Z0.1 F1000; scrape off any ooze\nG1 Z10 ; lift\nG1 X100 Y240 F10000; move to unused back edge\nG1 Z0.30 F1000\nG1 X20 E9.25  F1000; deposit extrusion line\nG1 Y239  E9.45 F1000 ; move  and extrude y\nG1 X70 E17.05; lift F1000; deposit extrusion line\nG1 X100 Z0.05 F1000 ; wipe off tail\nG92 E0; zero extruder\nG1 Z10 Y225 ; move back to safe bounds\nG1 X-20.77 F4800 ; move T0 home\nG92 E0{endif}\n; ok now you can start
+toolchange_gcode = {if next_extruder == 0}\nT1 ; makes sure T1 is active\nG90 ; switch into absolute mode\nG1 X252\nT0\n{endif}\n\n{if next_extruder == 1}\nT0 ; makes sure T0 is active\nG90 ; switch into absolute mode\nG1 X-4\nT1\n{endif}\n
+# thumbnails = 16x16,220x124
+
@@ -0,0 +1,12 @@
+[printer:MakerGear M3 Independent Dual Rev.1 (Duplication Mode)]
+inherits = MakerGear M3 Independent Dual Rev.1
+bed_shape = 0x0,100x0,100x251,0x251
+end_gcode = M605 S0 ; set to full independent control\nM104 S0 ; turn off extruder\nM104 S0 T0 ; turn off extruder\nM104 S0 T1 ; turn off extruder\nM140 S0 ; turn off bed\nM106 S0 ; turn off cooling fan\nG91 ; relative mode\nG1 Z20 ; move Z down 20mm if possible Max endstop will catch it if it is to far\nG90 ;  absolute mode\nG28 X ; home tools\nT0 ; default tool should always be T0\nG1 Y230 F10000 ; move build plate out\nM84 ; disable motors
+extruders_count = 1
+nozzle_diameter = 0.35
+printer_model = MAKERGEAR_M3_ID_1_DUPLICATION
+printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKERGEAR\nPRINTER_MODEL_MAKERGEAR_M3_ID_1_DUPLICATION\n 
+printer_variant = 0.35
+start_gcode = ;M3 ID Duplication Mode startup script\nM211 S1 ; turn on soft endstops to protect the machine\nM605 S0 ; set to full independent control on x axes\nG28 XYZ ; home without mesh level compensation\n\n; Set hotend temperature\nM104 T0 S{first_layer_temperature[0]}\nM104 T1 S{first_layer_temperature[0]}\n\n; Wait for hotend's to reach temperature\nM109 T0 S{first_layer_temperature[0]}\nM109 T1 S{first_layer_temperature[0]}\n\nT0 ; Make sure we're on T0\nM605 S2 R0 X100 ; set X to duplication mode 0 temperature difference 100 X difference\nG28 X ; home x axes to engange mode\nM211 S0 ; turn off soft endstops to let us move to back of the bed\nG1 X20 F1000 ; move to start x position\nG1 Y243 Z0.1 F10000 ; move off the bed and bring the bed up\nG92 E0 ; zero extruder\nG1 Y240 Z0.1 F1000 ; scrape off any ooze\nG1 Z0.30 F1000 ; lift\nG1 X80 E9.25 ; lift F1000 ; deposit extrusion line\nG1 Y239  E9.45 F1000 ; move  and extrude y\nG1 X30 E17.05 ; lift F1000 ; deposit extrusion line\nG1 X20 Z0.05 F1000 ; wipe off tail\nG1 Z10 Y223 ; lift to avoid clips and move back to safe bounds\nM400 ; wait for moves to finish before proceeding so that T1 doesn't get caught in a deadzone when switching back to Soft endstops on \n;\n;\nM211 S0 ; turn off soft endstops  \nG92 E0; zero extruder
+# thumbnails = 16x16,300x350
+
@@ -0,0 +1,11 @@
+[printer:MakerGear M3 Independent Dual Rev.1 0.25 Nozzle (Duplication Mode)]
+inherits = MakerGear M3 Independent Dual Rev.1 (Duplication Mode)
+default_print_profile = 0.15mm Normal @0.25 nozzle MakerGear
+max_layer_height = 0.15
+min_layer_height = 0.05
+nozzle_diameter = 0.25
+printer_variant = 0.25
+retract_length = 1
+retract_lift = 0.15
+retract_speed = 50
+
--- a/Show More
+++ b/Show More