Initial Profile Sources

profile_sources/non-prusa-fff/MakerGear/print/0.10mm Fine @0.35 nozzle MakerGear.ini

@@ -0,0 +1,17 @@
+[print:0.10mm Fine @0.35 nozzle MakerGear]
+inherits = *0.10mm*
+bridge_speed = 40
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.35
+external_perimeter_speed = 45
+fill_density = 15%
+fill_pattern = 3dhoneycomb
+infill_acceleration = 1000
+infill_speed = 55
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+
+# ---------------------------
+# 0.15mm
+# ---------------------------

profile_sources/non-prusa-fff/MakerGear/print/0.15mm Normal @0.25 nozzle MakerGear.ini

@@ -0,0 +1,5 @@
+[print:0.15mm Normal @0.25 nozzle MakerGear]
+inherits = *0.15mm*; *0.25nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.25
+
+# M2, M3, U1

profile_sources/non-prusa-fff/MakerGear/print/0.15mm Quality @0.35 nozzle MakerGear.ini

@@ -0,0 +1,6 @@
+[print:0.15mm Quality @0.35 nozzle MakerGear]
+inherits = *0.15mm*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.35
+bridge_flow_ratio = 0.95
+
+# Micro

profile_sources/non-prusa-fff/MakerGear/print/0.15mm Quality @0.40 nozzle MakerGear.ini

@@ -0,0 +1,8 @@
+[print:0.15mm Quality @0.40 nozzle MakerGear]
+inherits = *0.15mm*; *0.40nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_MICRO.*/ and nozzle_diameter[0]==0.40
+first_layer_height = 0.2
+
+# ---------------------------
+# 0.20mm
+# ---------------------------

profile_sources/non-prusa-fff/MakerGear/print/0.20mm Normal @0.35 nozzle MakerGear.ini

@@ -0,0 +1,6 @@
+[print:0.20mm Normal @0.35 nozzle MakerGear]
+inherits = *0.20mm*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.35
+bridge_flow_ratio = 0.95
+
+# Micro

profile_sources/non-prusa-fff/MakerGear/print/0.20mm Normal @0.40 Nozzle MakerGear.ini

@@ -0,0 +1,8 @@
+[print:0.20mm Normal @0.40 Nozzle MakerGear]
+inherits = *0.20mm*; *0.40nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_MICRO.*/ and nozzle_diameter[0]==0.40
+perimeters = 3
+
+# ---------------------------
+# 0.25mm (Testing)
+# ---------------------------

profile_sources/non-prusa-fff/MakerGear/print/0.20mm Quality @0.50 nozzle MakerGear.ini

@@ -0,0 +1,5 @@
+[print:0.20mm Quality @0.50 nozzle MakerGear]
+inherits = *0.20mm*; *0.50nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.50
+
+# M2, M3, U1

profile_sources/non-prusa-fff/MakerGear/print/0.25mm Fast @0.40 nozzle MakerGear.ini

@@ -0,0 +1,6 @@
+[print:0.25mm Fast @0.40 nozzle MakerGear]
+inherits = *0.25mm*; *0.40nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_MICRO.*/ and nozzle_diameter[0]==0.40
+perimeters = 3
+
+# M2, M3, U1

profile_sources/non-prusa-fff/MakerGear/print/0.25mm Normal @0.50 nozzle MakerGear.ini

@@ -0,0 +1,6 @@
+[print:0.25mm Normal @0.50 nozzle MakerGear]
+inherits = *0.25mm*; *0.50nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.50
+first_layer_height = 0.26
+
+# M2, M3, U1

profile_sources/non-prusa-fff/MakerGear/print/0.25mm Quality @0.75 nozzle MakerGear.ini

@@ -0,0 +1,7 @@
+[print:0.25mm Quality @0.75 nozzle MakerGear]
+inherits = *0.25mm*; *0.75nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.75
+
+# ---------------------------
+# 0.30mm
+# ---------------------------

profile_sources/non-prusa-fff/MakerGear/print/0.25mm Speed @0.35 nozzle MakerGear.ini

@@ -0,0 +1,13 @@
+[print:0.25mm Speed @0.35 nozzle MakerGear]
+inherits = *0.25mm*
+bridge_speed = 60
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.35
+external_perimeter_speed = 70
+infill_acceleration = 2000
+infill_speed = 200
+max_print_speed = 200
+perimeter_speed = 75
+solid_infill_speed = 200
+top_solid_infill_speed = 70
+
+# Micro

profile_sources/non-prusa-fff/MakerGear/print/0.30mm Normal @0.75 nozzle MakerGear.ini

@@ -0,0 +1,7 @@
+[print:0.30mm Normal @0.75 nozzle MakerGear]
+inherits = *0.30mm*; *0.75nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.75
+
+# ---------------------------
+# 0.35mm (Testing)
+# ---------------------------

profile_sources/non-prusa-fff/MakerGear/print/0.30mm Speed @0.50 nozzle MakerGear.ini

@@ -0,0 +1,6 @@
+[print:0.30mm Speed @0.50 nozzle MakerGear]
+inherits = *0.30mm*; *0.50nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.50
+first_layer_height = 0.22
+
+# M2, M3, U1

profile_sources/non-prusa-fff/MakerGear/print/0.35mm Speed @0.75 nozzle MakerGear.ini

@@ -0,0 +1,7 @@
+[print:0.35mm Speed @0.75 nozzle MakerGear]
+inherits = *0.35mm*; *0.75nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.75
+
+# ---------------------------
+# 0.40mm (NOT READY)
+# ---------------------------

profile_sources/non-prusa-fff/MakerGear/print/_0.05mm_.ini

@@ -0,0 +1,32 @@
+[print:*0.05mm*]
+inherits = *common*
+bottom_solid_layers = 10
+bridge_acceleration = 300
+bridge_flow_ratio = 0.7
+default_acceleration = 1000
+external_perimeter_speed = 20
+fill_density = 15%
+first_layer_acceleration = 500
+gap_fill_speed = 20
+infill_acceleration = 800
+infill_speed = 30
+layer_height = 0.05
+max_print_speed = 80
+perimeter_acceleration = 300
+perimeter_speed = 30
+perimeters = 3
+small_perimeter_speed = 20
+solid_infill_speed = 30
+support_material_extrusion_width = 0.3
+support_material_spacing = 1.5
+support_material_speed = 30
+top_solid_infill_speed = 20
+top_solid_layers = 15
+
+# [print:NOT READY 0.05mm ULTRAFINE @0.25 nozzle] # M2, M3, U1
+# inherits = *0.05mm*; *0.25nozzle*
+# compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.25
+
+# ---------------------------
+# 0.07mm (Testing)
+# ---------------------------

profile_sources/non-prusa-fff/MakerGear/print/_0.07mm_.ini

@@ -0,0 +1,33 @@
+[print:*0.07mm*]
+inherits = *common*
+bottom_solid_layers = 8
+bridge_acceleration = 300
+bridge_flow_ratio = 0.7
+bridge_speed = 20
+default_acceleration = 1000
+external_perimeter_speed = 20
+fill_density = 15%
+first_layer_acceleration = 500
+gap_fill_speed = 20
+infill_acceleration = 800
+infill_speed = 40
+layer_height = 0.07
+max_print_speed = 80
+perimeter_acceleration = 300
+perimeter_speed = 30
+perimeters = 3
+small_perimeter_speed = 20
+solid_infill_speed = 40
+support_material_extrusion_width = 0.3
+support_material_spacing = 1.5
+support_material_speed = 40
+top_solid_infill_speed = 30
+top_solid_layers = 11
+
+# [print:NOT READY  0.07mm Quality @0.25 nozzle] # M2, M3, U1
+# inherits = *0.07mm*; *0.25nozzle*
+# compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.25
+
+# ---------------------------
+# 0.10mm (Testing)
+# ---------------------------

profile_sources/non-prusa-fff/MakerGear/print/_0.10mm_.ini

@@ -0,0 +1,23 @@
+[print:*0.10mm*]
+inherits = *common*
+bottom_solid_layers = 7
+bridge_flow_ratio = 0.7
+bridge_speed = 20
+fill_density = 15%
+first_layer_speed = 25
+gap_fill_speed = 20
+infill_speed = 40
+layer_height = 0.1
+max_print_speed = 80
+perimeter_acceleration = 800
+perimeter_speed = 30
+perimeters = 3
+small_perimeter_speed = 20
+solid_infill_speed = 40
+support_material_extrusion_width = 0.3
+support_material_spacing = 1.5
+support_material_speed = 40
+top_solid_infill_speed = 30
+top_solid_layers = 9
+
+ # M2, M3, U1

profile_sources/non-prusa-fff/MakerGear/print/_0.15mm_.ini

@@ -0,0 +1,14 @@
+[print:*0.15mm*]
+inherits = *common*
+bottom_solid_layers = 5
+external_perimeter_speed = 40
+infill_acceleration = 2000
+infill_speed = 60
+layer_height = 0.15
+perimeter_acceleration = 800
+perimeter_speed = 50
+solid_infill_speed = 50
+top_infill_extrusion_width = 0.4
+top_solid_layers = 7
+
+ # M2, M3, U1

profile_sources/non-prusa-fff/MakerGear/print/_0.20mm_.ini

@@ -0,0 +1,12 @@
+[print:*0.20mm*]
+inherits = *common*
+bottom_solid_layers = 2
+bridge_flow_ratio = 0.9
+external_perimeter_speed = 60
+infill_speed = 65
+layer_height = 0.2
+perimeter_speed = 50
+solid_infill_speed = 50
+top_solid_layers = 3
+
+# M2, M3, U1

profile_sources/non-prusa-fff/MakerGear/print/_0.25mm_.ini

@@ -0,0 +1,11 @@
+[print:*0.25mm*]
+inherits = *common*
+bottom_solid_layers = 4
+bridge_flow_ratio = 0.95
+external_perimeter_speed = 40
+layer_height = 0.25
+perimeter_acceleration = 800
+perimeter_speed = 50
+top_solid_layers = 4
+
+# M2, M3, U1

profile_sources/non-prusa-fff/MakerGear/print/_0.25nozzle_.ini

@@ -0,0 +1,17 @@
+[print:*0.25nozzle*]
+elefant_foot_compensation = 0
+external_perimeter_extrusion_width = 0.30
+extrusion_width = 0.30
+first_layer_extrusion_width = 0.3
+infill_extrusion_width = 0.30
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeter_extrusion_width = 0.30
+solid_infill_extrusion_width = 0.30
+support_material_extrusion_width = 0.30
+support_material_interface_layers = 0
+support_material_interface_spacing = 0.15
+support_material_spacing = 1
+support_material_xy_spacing = 150%
+top_infill_extrusion_width = 0.30
+
+ ; Only for the MakerGear Micro 

profile_sources/non-prusa-fff/MakerGear/print/_0.30mm_.ini

@@ -0,0 +1,17 @@
+[print:*0.30mm*]
+inherits = *common*
+bottom_solid_layers = 3
+bridge_flow_ratio = 0.95
+external_perimeter_speed = 75
+first_layer_height = 0.24
+gap_fill_speed = 40
+infill_speed = 80
+layer_height = 0.3
+perimeter_speed = 65
+small_perimeter_speed = 35
+solid_infill_speed = 50
+support_material_contact_distance = 0.3
+top_infill_extrusion_width = 0.4
+top_solid_layers = 4
+
+ # M2, M3, U1

profile_sources/non-prusa-fff/MakerGear/print/_0.35mm_.ini

@@ -0,0 +1,22 @@
+[print:*0.35mm*]
+inherits = *common*
+bottom_solid_layers = 3
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 40
+first_layer_extrusion_width = 0.75
+infill_acceleration = 2000
+infill_speed = 60
+layer_height = 0.35
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 60
+top_solid_infill_speed = 50
+top_solid_layers = 4
+
+# [print:NOT READY 0.35mm Speed @0.50 nozzle MakerGear]
+#inherits = *0.35*; *0.50nozzle*
+# compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.50
+
+# M2, M3, U1

profile_sources/non-prusa-fff/MakerGear/print/_0.40mm_.ini

@@ -0,0 +1,31 @@
+[print:*0.40mm*]
+inherits = *common*
+bottom_solid_layers = 3
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 40
+first_layer_extrusion_width = 0.75
+infill_acceleration = 2000
+infill_speed = 60
+layer_height = 0.40
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 60
+top_solid_infill_speed = 50
+top_solid_layers = 4
+
+# [print:NOT READY 0.40mm Do_I_Want_To_Support_This @0.75 nozzle] # M2, M3, U1
+# inherits = *0.40mm*; *0.75nozzle*
+# compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_MAKERGEAR.*/ and printer_notes=~/.*PRINTER_MODEL_MAKERGEAR_(U1|M(2|2_DUAL|3_SE|3_ID|3_ID_DUPLICATION)).*/ and nozzle_diameter[0]==0.75
+
+
+# /~~~~~~~~~~~~~~~~~~~~~~~~~\
+# |~~~ Filament Settings ~~~|
+# \~~~~~~~~~~~~~~~~~~~~~~~~~/
+# When submitting new filaments please print the following temperature tower at 0.1mm layer height:
+#   https://www.thingiverse.com/thing:2615842
+# Pay particular attention to bridging, overhangs and retractions.
+# Also print the following bed adhesion test at 0.1 layer height as well:
+#   https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
+

profile_sources/non-prusa-fff/MakerGear/print/_0.40nozzle_.ini

@@ -0,0 +1,32 @@
+[print:*0.40nozzle*]
+bottom_solid_min_thickness = 0.5
+bridge_speed = 55
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 35
+extrusion_width = 0.45
+first_layer_extrusion_width = 0.42
+infill_anchor_max = 15
+infill_extrusion_width = 0.45
+infill_speed = 40
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+overhangs = 1 
+perimeter_extrusion_width = 0.45
+perimeter_speed = 35
+small_perimeter_speed = 35
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 45
+support_material = 1
+support_material_auto = 1
+support_material_contact_distance = 0.3
+support_material_extrusion_width = 0.45
+support_material_interface_layers = 1
+support_material_interface_spacing = 0.3
+support_material_spacing = 2.5
+support_material_speed = 35
+support_material_threshold = 60
+support_material_with_sheath = 1
+support_material_xy_spacing = 80%
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 25
+top_solid_min_thickness = 0.7
+

profile_sources/non-prusa-fff/MakerGear/print/_0.50nozzle_.ini

@@ -0,0 +1,17 @@
+[print:*0.50nozzle*]
+bottom_solid_min_thickness = 0.5
+external_perimeter_extrusion_width = 0.60
+extrusion_width = 0.60
+first_layer_extrusion_width = 0.60
+infill_anchor_max = 15
+infill_extrusion_width = 0.60
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeter_extrusion_width = 0.60
+solid_infill_extrusion_width = 0.60
+support_material_contact_distance = 0.25
+support_material_extrusion_width = 0.60
+support_material_interface_spacing = 0.3
+support_material_xy_spacing = 180%
+top_infill_extrusion_width = 0.60
+top_solid_min_thickness = 0.8
+

profile_sources/non-prusa-fff/MakerGear/print/_0.75nozzle_.ini

@@ -0,0 +1,46 @@
+[print:*0.75nozzle*]
+bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 1000
+bridge_flow_ratio = 0.9
+bridge_speed = 22
+default_acceleration = 1000
+external_perimeter_extrusion_width = 0.84
+extrusion_width = 0.84
+fill_density = 10%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.94
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 20
+infill_acceleration = 1000
+infill_anchor_max = 20
+infill_extrusion_width = 0.84
+infill_speed = 85
+infill_overlap = 25%
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeter_acceleration = 800
+perimeter_extrusion_width = 0.84
+single_extruder_multi_material_priming = 0
+skirt_distance = 3
+skirt_height = 2
+solid_infill_speed = 55
+solid_infill_extrusion_width = 0.84
+support_material_contact_distance = 0.3
+support_material_extrusion_width = 0.7
+support_material_interface_spacing = 0.4
+support_material_interface_speed = 175%
+support_material_spacing = 2
+support_material_threshold = 50
+support_material_xy_spacing = 200%
+top_infill_extrusion_width = 0.8
+top_solid_layers = 4
+top_solid_min_thickness = 1.2
+
+# /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
+# |~~~ Layer Height Settings ~~~|
+# \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
+# ---------------------------
+#      (not used) 0.05mm
+# ---------------------------

profile_sources/non-prusa-fff/MakerGear/print/_common_.ini

@@ -0,0 +1,102 @@
+[print:*common*]
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 65
+brim_width = 0
+brim_type = outer_only
+clip_multipart_objects = 1
+complete_objects = 0
+dont_support_bridges = 0
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.42
+external_perimeter_speed = 80
+external_perimeters_first = 1
+extra_perimeters = 1
+extrusion_width = 0.42
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.16
+first_layer_speed = 35
+gap_fill_speed = 30
+gcode_comments = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.42
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 90
+interface_shells = 0
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+overhangs = 1
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.42
+perimeter_generator = arachne
+perimeter_speed = 65
+perimeters = 2
+raft_first_layer_density = 60
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 1
+skirts = 3
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.42
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 50
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.25
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.42
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.3
+support_material_interface_speed = 100%
+support_material_pattern = honeycomb
+support_material_spacing = 2
+support_material_speed = 60
+support_material_style = snug
+support_material_synchronize_layers = 0
+support_material_threshold = 65
+support_material_with_sheath = 0
+support_material_xy_spacing = 200%
+thin_walls = 1
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0.42
+top_solid_infill_speed = 35
+travel_speed = 150
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 40
+xy_size_compensation = 0
+
+# /~~~~~~~~~~~~~~~~~~~~~~~\
+# |~~~ Nozzle Variants ~~~|
+# \~~~~~~~~~~~~~~~~~~~~~~~/