Initial Profile Sources

profile_sources/non-prusa-fff/PapapiuLab/print/0.15mm FAST @Papapiu.ini

@@ -0,0 +1,17 @@
+[print:0.15mm FAST @Papapiu]
+inherits = *common*; *0.15mm*
+compatible_printers_condition = printer_model=~/(Papapiu_N1S).*/
+external_perimeter_speed = 140
+first_layer_infill_speed = 60
+first_layer_speed = 100
+gap_fill_speed = 50
+infill_speed = 230
+ironing_speed = 15
+max_print_speed = 300
+max_volumetric_speed = 25
+perimeter_speed = 160
+small_perimeter_speed = 25
+solid_infill_speed = 80%
+top_solid_infill_speed = 60%
+fill_pattern = cubic
+

profile_sources/non-prusa-fff/PapapiuLab/print/0.15mm NORMAL @Papapiu.ini

@@ -0,0 +1,6 @@
+[print:0.15mm NORMAL @Papapiu]
+inherits = *common*; *0.15mm*
+max_print_speed = 300
+bottom_solid_layers = 8
+top_solid_layers = 8
+

profile_sources/non-prusa-fff/PapapiuLab/print/0.20mm FAST @Papapiu.ini

@@ -0,0 +1,18 @@
+[print:0.20mm FAST @Papapiu]
+inherits = 0.15mm FAST @Papapiu; *0.2mm*
+compatible_printers_condition = printer_model=~/(Papapiu_N1S).*/
+external_perimeter_speed = 140
+first_layer_infill_speed = 60
+first_layer_speed = 100
+gap_fill_speed = 50
+infill_speed = 230
+ironing_speed = 15
+max_print_speed = 300
+max_volumetric_speed = 25
+perimeter_speed = 160
+small_perimeter_speed = 25
+solid_infill_speed = 80%
+top_solid_infill_speed = 60%
+
+
+# Common printer preset

profile_sources/non-prusa-fff/PapapiuLab/print/0.20mm NORMAL @Papapiu.ini

@@ -0,0 +1,7 @@
+[print:0.20mm NORMAL @Papapiu]
+inherits = *common*; *0.2mm*
+fill_pattern = cubic
+external_perimeter_speed = 120
+infill_speed = 160
+compatible_printers_condition = printer_model=~/(Papapiu_N1S).*/
+

profile_sources/non-prusa-fff/PapapiuLab/print/_0.15mm_.ini

@@ -0,0 +1,8 @@
+[print:*0.15mm*]
+bottom_solid_layers = 7
+top_solid_layers = 7
+layer_height = 0.15
+bridge_flow_ratio = 0.7
+max_print_speed = 250
+solid_infill_speed = 80%
+

profile_sources/non-prusa-fff/PapapiuLab/print/_0.2mm_.ini

@@ -0,0 +1,6 @@
+[print:*0.2mm*]
+bottom_solid_layers = 5
+top_solid_layers = 5
+layer_height = 0.2
+bridge_flow_ratio = 0.8
+

profile_sources/non-prusa-fff/PapapiuLab/print/_common_.ini

@@ -0,0 +1,123 @@
+[print:*common*]
+compatible_printers_condition = printer_model=~/(Papapiu_N1S).*/
+allow_empty_layers = 0
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+extra_perimeters = 0
+bottom_solid_layers = 8
+bottom_solid_min_thickness = 0
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_speed = 60
+brim_offset = 0
+brim_width = 0
+clip_multipart_objects = 1
+complete_objects = 0
+complete_objects_one_skirt = 0
+complete_objects_sort = object
+default_acceleration = 12000
+dont_support_bridges = 1
+draft_shield = 0
+ensure_vertical_shell_thickness = 1
+exact_last_layer_height = 0
+external_perimeter_extrusion_width = 0.4
+external_perimeter_speed = 90%
+extrusion_width = 0.4
+fill_angle = 45
+fill_density = 15%
+fill_pattern = cubic
+first_layer_acceleration = 3000
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 100
+gap_fill = 1
+gap_fill_speed = 50
+gcode_comments = 0
+gcode_label_objects = 1
+infill_acceleration = 12000
+infill_anchor = 600%
+infill_anchor_max = 5
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.4
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 18%
+infill_speed = 150
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.15
+max_print_speed = 300
+max_volumetric_speed = 12
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{print_time}.gcode
+perimeter_acceleration = 12000
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.4
+perimeter_speed = 120
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+skirt_distance = 10
+skirt_height = 1
+skirts = 2
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.4
+solid_infill_speed = 80%
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance_bottom = 0.2
+support_material_contact_distance_top = 0.2
+support_material_extruder = 0
+support_material_extrusion_width = 0.38
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_solid_first_layer = 0
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 65
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 60%
+top_solid_layers = 8
+top_solid_min_thickness = 0
+travel_speed = 250
+travel_speed_z = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+elefant_foot_compensation = 0.1
+