Santoku-Slicer/Profiles
1
0
Fork 0
mirror of https://github.com/Santoku-Slicer/Profiles.git synced 2026-10-02 02:27:17 +00:00
Code Issues Packages Projects Releases Wiki Activity

Initial Profile Sources

Browse Source
This commit is contained in:
Dark98
2026-03-19 01:54:47 +00:00
parent 7e2e8f9d47
commit 1f7873734a
13374 changed files with 256890 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
profile_sources/non-prusa-fff/QIDITechnology/filament/_common_.ini
+85
View File
@@ -0,0 +1,85 @@
[filament:*common*]
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition =
compatible_prints =
compatible_prints_condition =
cooling = 1
disable_fan_first_layers = 1
disable_rapid_cooling_fan_first_layers = 3
enable_advance_pressure = 1
enable_auxiliary_fan = 100
enable_auxiliary_fan_unseal = 0
enable_dynamic_fan_speeds = 0
enable_volume_fan = 100
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 0.98
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #3399FF
filament_cooling_final_speed = 0
filament_cooling_initial_speed = 0
filament_cooling_moves = 0
filament_cost = 0
filament_density = 1.24
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 0
filament_loading_speed_start = 0
filament_max_volumetric_speed = 20
filament_minimal_purge_on_wipe_tower = 5
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_purge_multiplier = 100
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id =
filament_shrink = 100
filament_soluble = 0
filament_spool_weight = 0
filament_stamping_distance = 0
filament_stamping_loading_speed = 0
filament_toolchange_delay = 0
filament_travel_max_lift = nil
filament_travel_ramping_lift = nil
filament_travel_slope = nil
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 0
filament_unloading_speed_start = 0
filament_vendor = QIDI
filament_wipe = nil
filament_wipe_distance = nil
first_layer_bed_temperature = 60
first_layer_temperature = 210
full_fan_speed_layer = 0
idle_temperature = 100
inherits =
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 20
overhang_fan_speed_0 = 0
overhang_fan_speed_1 = 0
overhang_fan_speed_2 = 0
overhang_fan_speed_3 = 0
seal_print = 1
slowdown_below_layer_time = 8
start_filament_gcode = "; Filament gcode\nM900 K0.02 T0.03\n"
temperature = 220
chamber_temperature = 0
cooling_slowdown_logic = consistent_surface
cooling_perimeter_transition_distance = 3
# QIDI filament preset