mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-10-01 02:27:17 +00:00
Initial Profile Sources
This commit is contained in:
Dark98
@@ -0,0 +1,81 @@
|
||||
[filament:GENERIC PLA @0.4 V2]
|
||||
bed_temperature = 70
|
||||
bridge_fan_speed = 80
|
||||
chamber_minimal_temperature = 0
|
||||
chamber_temperature = 0
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.4
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 2
|
||||
enable_dynamic_fan_speeds = 1
|
||||
end_filament_gcode = ";Filament-specific end gcode"
|
||||
extrusion_multiplier = 0.95
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 6
|
||||
filament_abrasive = 0
|
||||
filament_colour = #FF8000
|
||||
filament_cooling_final_speed = 2
|
||||
filament_cooling_initial_speed = 3
|
||||
filament_cooling_moves = 1
|
||||
filament_cost = 36.29
|
||||
filament_density = 1.24
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_infill_max_crossing_speed = 0
|
||||
filament_infill_max_speed = 0
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 14
|
||||
filament_loading_speed_start = 19
|
||||
filament_max_volumetric_speed = 25
|
||||
filament_minimal_purge_on_wipe_tower = 0
|
||||
filament_multitool_ramming = 0
|
||||
filament_multitool_ramming_flow = 10
|
||||
filament_multitool_ramming_volume = 10
|
||||
filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"
|
||||
filament_purge_multiplier = 100%
|
||||
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_length_toolchange = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_restart_extra_toolchange = nil
|
||||
filament_retract_speed = nil
|
||||
filament_seam_gap_distance = nil
|
||||
filament_settings_id = ""
|
||||
filament_shrinkage_compensation_xy = 0%
|
||||
filament_shrinkage_compensation_z = 0%
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_stamping_distance = 0
|
||||
filament_stamping_loading_speed = 20
|
||||
filament_toolchange_delay = 0
|
||||
filament_travel_lift_before_obstacle = nil
|
||||
filament_travel_max_lift = nil
|
||||
filament_travel_ramping_lift = nil
|
||||
filament_travel_slope = nil
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 20
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = RatRig
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 70
|
||||
first_layer_temperature = 210
|
||||
full_fan_speed_layer = 3
|
||||
idle_temperature = nil
|
||||
inherits =
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 60
|
||||
min_print_speed = 20
|
||||
overhang_fan_speed_0 = 80
|
||||
overhang_fan_speed_1 = 70
|
||||
overhang_fan_speed_2 = 60
|
||||
overhang_fan_speed_3 = 50
|
||||
slowdown_below_layer_time = 4
|
||||
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_300_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_300_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_300_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.028{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_400_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.038{endif}{if printer_notes=~/.*(RR_VC4_400_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_400_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_400_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.038{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_500_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.04{endif}{if printer_notes=~/.*(RR_VC4_500_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.037{endif}{if printer_notes=~/.*(RR_VC4_500_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.037{endif}{if printer_notes=~/.*(RR_VC4_500_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.04{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}
|
||||
temperature = 210
|
||||
|
||||
@@ -0,0 +1,85 @@
|
||||
[filament:GENERIC PLA @0.5 V2]
|
||||
bed_temperature = 70
|
||||
bridge_fan_speed = 80
|
||||
chamber_minimal_temperature = 0
|
||||
chamber_temperature = 0
|
||||
compatible_printers =
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.5
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
enable_dynamic_fan_speeds = 1
|
||||
end_filament_gcode = ";Filament-specific end gcode"
|
||||
extrusion_multiplier = 0.95
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 6
|
||||
filament_abrasive = 0
|
||||
filament_colour = #FF8000
|
||||
filament_cooling_final_speed = 2
|
||||
filament_cooling_initial_speed = 3
|
||||
filament_cooling_moves = 1
|
||||
filament_cost = 36.29
|
||||
filament_density = 1.24
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_infill_max_crossing_speed = 0
|
||||
filament_infill_max_speed = 0
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 14
|
||||
filament_loading_speed_start = 19
|
||||
filament_max_volumetric_speed = 25
|
||||
filament_minimal_purge_on_wipe_tower = 0
|
||||
filament_multitool_ramming = 0
|
||||
filament_multitool_ramming_flow = 10
|
||||
filament_multitool_ramming_volume = 10
|
||||
filament_notes = ""
|
||||
filament_purge_multiplier = 100%
|
||||
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = 1.2
|
||||
filament_retract_length_toolchange = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_restart_extra_toolchange = nil
|
||||
filament_retract_speed = nil
|
||||
filament_seam_gap_distance = nil
|
||||
filament_settings_id = ""
|
||||
filament_shrinkage_compensation_xy = 0%
|
||||
filament_shrinkage_compensation_z = 0%
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_stamping_distance = 0
|
||||
filament_stamping_loading_speed = 20
|
||||
filament_toolchange_delay = 0
|
||||
filament_travel_lift_before_obstacle = nil
|
||||
filament_travel_max_lift = nil
|
||||
filament_travel_ramping_lift = nil
|
||||
filament_travel_slope = nil
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 20
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = RatRig
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 70
|
||||
first_layer_temperature = 210
|
||||
full_fan_speed_layer = 3
|
||||
idle_temperature = nil
|
||||
inherits =
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 20
|
||||
overhang_fan_speed_0 = 80
|
||||
overhang_fan_speed_1 = 70
|
||||
overhang_fan_speed_2 = 50
|
||||
overhang_fan_speed_3 = 50
|
||||
slowdown_below_layer_time = 8
|
||||
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_300_XY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_300_HY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_300_HY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.028{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_400_XY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.038{endif}{if printer_notes=~/.*(RR_VC4_400_XY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_400_HY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_400_HY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.038{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_500_XY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.04{endif}{if printer_notes=~/.*(RR_VC4_500_XY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.037{endif}{if printer_notes=~/.*(RR_VC4_500_HY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.037{endif}{if printer_notes=~/.*(RR_VC4_500_HY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.04{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}
|
||||
temperature = 220
|
||||
|
||||
|
||||
@@ -0,0 +1,81 @@
|
||||
[filament:GENERIC PLA @0.6 V2]
|
||||
bed_temperature = 70
|
||||
bridge_fan_speed = 80
|
||||
chamber_minimal_temperature = 0
|
||||
chamber_temperature = 0
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.6
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
enable_dynamic_fan_speeds = 1
|
||||
end_filament_gcode = ";Filament-specific end gcode"
|
||||
extrusion_multiplier = 0.95
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 8
|
||||
filament_abrasive = 0
|
||||
filament_colour = #FF8000
|
||||
filament_cooling_final_speed = 2
|
||||
filament_cooling_initial_speed = 3
|
||||
filament_cooling_moves = 1
|
||||
filament_cost = 36.29
|
||||
filament_density = 1.24
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_infill_max_crossing_speed = 140
|
||||
filament_infill_max_speed = 200
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 14
|
||||
filament_loading_speed_start = 19
|
||||
filament_max_volumetric_speed = 25
|
||||
filament_minimal_purge_on_wipe_tower = 0
|
||||
filament_multitool_ramming = 0
|
||||
filament_multitool_ramming_flow = 10
|
||||
filament_multitool_ramming_volume = 10
|
||||
filament_notes = ""
|
||||
filament_purge_multiplier = 100%
|
||||
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_length_toolchange = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_restart_extra_toolchange = nil
|
||||
filament_retract_speed = nil
|
||||
filament_seam_gap_distance = nil
|
||||
filament_settings_id = ""
|
||||
filament_shrinkage_compensation_xy = 0%
|
||||
filament_shrinkage_compensation_z = 0%
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_stamping_distance = 0
|
||||
filament_stamping_loading_speed = 20
|
||||
filament_toolchange_delay = 0
|
||||
filament_travel_lift_before_obstacle = nil
|
||||
filament_travel_max_lift = 0.6
|
||||
filament_travel_ramping_lift = 1
|
||||
filament_travel_slope = 1
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 20
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = RatRig
|
||||
filament_wipe = 1
|
||||
first_layer_bed_temperature = 70
|
||||
first_layer_temperature = 210
|
||||
full_fan_speed_layer = 3
|
||||
idle_temperature = nil
|
||||
inherits =
|
||||
max_fan_speed = 60
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 20
|
||||
overhang_fan_speed_0 = 80
|
||||
overhang_fan_speed_1 = 70
|
||||
overhang_fan_speed_2 = 60
|
||||
overhang_fan_speed_3 = 60
|
||||
slowdown_below_layer_time = 7
|
||||
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}
|
||||
temperature = 210
|
||||
|
||||
@@ -0,0 +1,81 @@
|
||||
[filament:PunkFil ABS @0.4 V2]
|
||||
bed_temperature = 110
|
||||
bridge_fan_speed = 80
|
||||
chamber_minimal_temperature = 0
|
||||
chamber_temperature = 0
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.4
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 2
|
||||
enable_dynamic_fan_speeds = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.92
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 8
|
||||
filament_abrasive = 0
|
||||
filament_colour = #ceff00
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 25.5
|
||||
filament_density = 1.04
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_infill_max_crossing_speed = 0
|
||||
filament_infill_max_speed = 0
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 30
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_multitool_ramming = 0
|
||||
filament_multitool_ramming_flow = 10
|
||||
filament_multitool_ramming_volume = 10
|
||||
filament_notes = ""
|
||||
filament_purge_multiplier = 100%
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_length_toolchange = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_restart_extra_toolchange = nil
|
||||
filament_retract_speed = nil
|
||||
filament_seam_gap_distance = nil
|
||||
filament_settings_id = ""
|
||||
filament_shrinkage_compensation_xy = 0.67%
|
||||
filament_shrinkage_compensation_z = 0%
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 220
|
||||
filament_stamping_distance = 0
|
||||
filament_stamping_loading_speed = 20
|
||||
filament_toolchange_delay = 0
|
||||
filament_travel_lift_before_obstacle = nil
|
||||
filament_travel_max_lift = nil
|
||||
filament_travel_ramping_lift = nil
|
||||
filament_travel_slope = nil
|
||||
filament_type = ABS
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = RatRig
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 110
|
||||
first_layer_temperature = 260
|
||||
full_fan_speed_layer = 0
|
||||
idle_temperature = nil
|
||||
inherits =
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 20
|
||||
overhang_fan_speed_0 = 80
|
||||
overhang_fan_speed_1 = 70
|
||||
overhang_fan_speed_2 = 60
|
||||
overhang_fan_speed_3 = 50
|
||||
slowdown_below_layer_time = 5
|
||||
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_300_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_300_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_300_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_400_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.033{endif}{if printer_notes=~/.*(RR_VC4_400_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.033{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_500_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.065{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.045{endif}
|
||||
temperature = 260
|
||||
|
||||
@@ -0,0 +1,84 @@
|
||||
[filament:PunkFil ABS @0.5 V2]
|
||||
bed_temperature = 110
|
||||
bridge_fan_speed = 80
|
||||
chamber_minimal_temperature = 0
|
||||
chamber_temperature = 0
|
||||
compatible_printers =
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.5
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 2
|
||||
enable_dynamic_fan_speeds = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.92
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 8
|
||||
filament_abrasive = 0
|
||||
filament_colour = #ceff00
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 25.5
|
||||
filament_density = 1.04
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_infill_max_crossing_speed = 0
|
||||
filament_infill_max_speed = 0
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 30
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_multitool_ramming = 0
|
||||
filament_multitool_ramming_flow = 10
|
||||
filament_multitool_ramming_volume = 10
|
||||
filament_notes = ""
|
||||
filament_purge_multiplier = 100%
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_length_toolchange = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_restart_extra_toolchange = nil
|
||||
filament_retract_speed = nil
|
||||
filament_seam_gap_distance = nil
|
||||
filament_settings_id = ""
|
||||
filament_shrinkage_compensation_xy = 0.67%
|
||||
filament_shrinkage_compensation_z = 0%
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 220
|
||||
filament_stamping_distance = 0
|
||||
filament_stamping_loading_speed = 20
|
||||
filament_toolchange_delay = 0
|
||||
filament_travel_lift_before_obstacle = nil
|
||||
filament_travel_max_lift = nil
|
||||
filament_travel_ramping_lift = nil
|
||||
filament_travel_slope = nil
|
||||
filament_type = ABS
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = RatRig
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 110
|
||||
first_layer_temperature = 260
|
||||
full_fan_speed_layer = 0
|
||||
idle_temperature = nil
|
||||
inherits =
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 20
|
||||
overhang_fan_speed_0 = 80
|
||||
overhang_fan_speed_1 = 70
|
||||
overhang_fan_speed_2 = 60
|
||||
overhang_fan_speed_3 = 50
|
||||
slowdown_below_layer_time = 5
|
||||
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_300_XY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_300_HY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_300_HY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_400_XY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.033{endif}{if printer_notes=~/.*(RR_VC4_400_XY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_HY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_HY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.033{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_XY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_500_XY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_HY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_HY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.065{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.045{endif}
|
||||
temperature = 265
|
||||
|
||||
@@ -0,0 +1,81 @@
|
||||
[filament:PunkFil ABS @0.6 V2]
|
||||
bed_temperature = 110
|
||||
bridge_fan_speed = 80
|
||||
chamber_minimal_temperature = 0
|
||||
chamber_temperature = 0
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.6
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 2
|
||||
enable_dynamic_fan_speeds = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.92
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 22
|
||||
filament_abrasive = 0
|
||||
filament_colour = #ceff00
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 25.5
|
||||
filament_density = 1.04
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_infill_max_crossing_speed = 0
|
||||
filament_infill_max_speed = 0
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 30
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_multitool_ramming = 0
|
||||
filament_multitool_ramming_flow = 10
|
||||
filament_multitool_ramming_volume = 10
|
||||
filament_notes = ""
|
||||
filament_purge_multiplier = 100%
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_length_toolchange = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_restart_extra_toolchange = nil
|
||||
filament_retract_speed = nil
|
||||
filament_seam_gap_distance = nil
|
||||
filament_settings_id = ""
|
||||
filament_shrinkage_compensation_xy = 0.67%
|
||||
filament_shrinkage_compensation_z = 0%
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 220
|
||||
filament_stamping_distance = 0
|
||||
filament_stamping_loading_speed = 20
|
||||
filament_toolchange_delay = 0
|
||||
filament_travel_lift_before_obstacle = nil
|
||||
filament_travel_max_lift = nil
|
||||
filament_travel_ramping_lift = nil
|
||||
filament_travel_slope = nil
|
||||
filament_type = ABS
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = RatRig
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 110
|
||||
first_layer_temperature = 260
|
||||
full_fan_speed_layer = 0
|
||||
idle_temperature = nil
|
||||
inherits =
|
||||
max_fan_speed = 70
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 15
|
||||
overhang_fan_speed_0 = 80
|
||||
overhang_fan_speed_1 = 70
|
||||
overhang_fan_speed_2 = 60
|
||||
overhang_fan_speed_3 = 60
|
||||
slowdown_below_layer_time = 14
|
||||
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.016{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.016{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.028{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}
|
||||
temperature = 260
|
||||
|
||||
@@ -0,0 +1,52 @@
|
||||
[filament:PunkFil ABS VC3 @RatRig]
|
||||
filament_vendor = RatRig
|
||||
filament_type = ABS
|
||||
bed_temperature = 110
|
||||
bridge_fan_speed = 80
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 2
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.92
|
||||
fan_always_on = 1
|
||||
filament_colour = #ceff00
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cooling_zone_pause = 0
|
||||
filament_cost = 25.5
|
||||
filament_density = 1.04
|
||||
filament_retract_speed = 120
|
||||
filament_deretract_speed = 120
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_speed = 0
|
||||
filament_max_volumetric_speed = 40
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_layer_change = 1
|
||||
filament_retract_length = 0.8
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 1000
|
||||
filament_toolchange_delay = 0
|
||||
filament_toolchange_part_fan_speed = 50
|
||||
filament_toolchange_temp = 200
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 110
|
||||
first_layer_temperature = 260
|
||||
full_fan_speed_layer = 0
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 30
|
||||
fan_below_layer_time = 8
|
||||
slowdown_below_layer_time = 3
|
||||
start_filament_gcode = ";Filament gcode\nSET_PRESSURE_ADVANCE ADVANCE=0.023"
|
||||
temperature = 260
|
||||
filament_shrinkage_compensation_xy = 0.67
|
||||
compatible_printers_condition = printer_model=~/.*VC3_300*/ or printer_model=~/.*VC3_400*/ or printer_model=~/.*VC3_500*/ or printer_notes=~/.*VCore4XYsettings*/
|
||||
|
||||
@@ -0,0 +1,81 @@
|
||||
[filament:PunkFil ASACF @0.4 V2]
|
||||
bed_temperature = 110
|
||||
bridge_fan_speed = 50
|
||||
chamber_minimal_temperature = 0
|
||||
chamber_temperature = 0
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.4
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 2
|
||||
enable_dynamic_fan_speeds = 0
|
||||
end_filament_gcode = "; Filament-specific end gcode"
|
||||
extrusion_multiplier = 0.9
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 5
|
||||
filament_abrasive = 0
|
||||
filament_colour = #BBBBBB
|
||||
filament_cooling_final_speed = 2
|
||||
filament_cooling_initial_speed = 3
|
||||
filament_cooling_moves = 1
|
||||
filament_cost = 54.99
|
||||
filament_density = 1.27
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_infill_max_crossing_speed = 0
|
||||
filament_infill_max_speed = 0
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 14
|
||||
filament_loading_speed_start = 19
|
||||
filament_max_volumetric_speed = 20
|
||||
filament_minimal_purge_on_wipe_tower = 0
|
||||
filament_multitool_ramming = 0
|
||||
filament_multitool_ramming_flow = 10
|
||||
filament_multitool_ramming_volume = 10
|
||||
filament_notes = ""
|
||||
filament_purge_multiplier = 100%
|
||||
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_length_toolchange = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_restart_extra_toolchange = nil
|
||||
filament_retract_speed = nil
|
||||
filament_seam_gap_distance = nil
|
||||
filament_settings_id = ""
|
||||
filament_shrinkage_compensation_xy = -0.5%
|
||||
filament_shrinkage_compensation_z = 0%
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 201
|
||||
filament_stamping_distance = 0
|
||||
filament_stamping_loading_speed = 20
|
||||
filament_toolchange_delay = 0
|
||||
filament_travel_lift_before_obstacle = nil
|
||||
filament_travel_max_lift = nil
|
||||
filament_travel_ramping_lift = nil
|
||||
filament_travel_slope = nil
|
||||
filament_type = ASA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 20
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = RatRig
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 110
|
||||
first_layer_temperature = 270
|
||||
full_fan_speed_layer = 2
|
||||
idle_temperature = nil
|
||||
inherits =
|
||||
max_fan_speed = 60
|
||||
min_fan_speed = 50
|
||||
min_print_speed = 20
|
||||
overhang_fan_speed_0 = 80
|
||||
overhang_fan_speed_1 = 70
|
||||
overhang_fan_speed_2 = 50
|
||||
overhang_fan_speed_3 = 60
|
||||
slowdown_below_layer_time = 10
|
||||
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_300_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_300_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_300_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.018{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_400_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_400_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_400_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_500_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.029{endif}{if printer_notes=~/.*(RR_VC4_500_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.029{endif}{if printer_notes=~/.*(RR_VC4_500_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.029{endif}
|
||||
temperature = 270
|
||||
|
||||
@@ -0,0 +1,84 @@
|
||||
[filament:PunkFil ASACF @0.5 V2]
|
||||
bed_temperature = 110
|
||||
bridge_fan_speed = 50
|
||||
chamber_minimal_temperature = 0
|
||||
chamber_temperature = 0
|
||||
compatible_printers =
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.5
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 2
|
||||
enable_dynamic_fan_speeds = 0
|
||||
end_filament_gcode = "; Filament-specific end gcode"
|
||||
extrusion_multiplier = 0.9
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 5
|
||||
filament_abrasive = 0
|
||||
filament_colour = #BBBBBB
|
||||
filament_cooling_final_speed = 2
|
||||
filament_cooling_initial_speed = 3
|
||||
filament_cooling_moves = 1
|
||||
filament_cost = 54.99
|
||||
filament_density = 1.27
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_infill_max_crossing_speed = 0
|
||||
filament_infill_max_speed = 0
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 14
|
||||
filament_loading_speed_start = 19
|
||||
filament_max_volumetric_speed = 20
|
||||
filament_minimal_purge_on_wipe_tower = 0
|
||||
filament_multitool_ramming = 0
|
||||
filament_multitool_ramming_flow = 10
|
||||
filament_multitool_ramming_volume = 10
|
||||
filament_notes = ""
|
||||
filament_purge_multiplier = 100%
|
||||
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_length_toolchange = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_restart_extra_toolchange = nil
|
||||
filament_retract_speed = nil
|
||||
filament_seam_gap_distance = nil
|
||||
filament_settings_id = ""
|
||||
filament_shrinkage_compensation_xy = -0.5%
|
||||
filament_shrinkage_compensation_z = 0%
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 201
|
||||
filament_stamping_distance = 0
|
||||
filament_stamping_loading_speed = 20
|
||||
filament_toolchange_delay = 0
|
||||
filament_travel_lift_before_obstacle = nil
|
||||
filament_travel_max_lift = nil
|
||||
filament_travel_ramping_lift = nil
|
||||
filament_travel_slope = nil
|
||||
filament_type = ASA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 20
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = RatRig
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 110
|
||||
first_layer_temperature = 270
|
||||
full_fan_speed_layer = 2
|
||||
idle_temperature = nil
|
||||
inherits =
|
||||
max_fan_speed = 30
|
||||
min_fan_speed = 30
|
||||
min_print_speed = 20
|
||||
overhang_fan_speed_0 = 80
|
||||
overhang_fan_speed_1 = 70
|
||||
overhang_fan_speed_2 = 50
|
||||
overhang_fan_speed_3 = 60
|
||||
slowdown_below_layer_time = 10
|
||||
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_300_XY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_300_HY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_300_HY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.018{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.023{endif}{if printer_notes=~/.*(RR_VC4_400_XY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_XY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_400_HY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_400_HY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_500_XY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_XY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.029{endif}{if printer_notes=~/.*(RR_VC4_500_HY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.029{endif}{if printer_notes=~/.*(RR_VC4_500_HY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.027{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.029{endif}
|
||||
temperature = 280
|
||||
|
||||
@@ -0,0 +1,81 @@
|
||||
[filament:PunkFil ASACF @0.6 V2]
|
||||
bed_temperature = 110
|
||||
bridge_fan_speed = 60
|
||||
chamber_minimal_temperature = 0
|
||||
chamber_temperature = 0
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.6
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 2
|
||||
enable_dynamic_fan_speeds = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode"
|
||||
extrusion_multiplier = 0.91
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 5
|
||||
filament_abrasive = 0
|
||||
filament_colour = #BBBBBB
|
||||
filament_cooling_final_speed = 2
|
||||
filament_cooling_initial_speed = 3
|
||||
filament_cooling_moves = 1
|
||||
filament_cost = 54.99
|
||||
filament_density = 1.27
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_infill_max_crossing_speed = 140
|
||||
filament_infill_max_speed = 200
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 14
|
||||
filament_loading_speed_start = 19
|
||||
filament_max_volumetric_speed = 15
|
||||
filament_minimal_purge_on_wipe_tower = 0
|
||||
filament_multitool_ramming = 0
|
||||
filament_multitool_ramming_flow = 10
|
||||
filament_multitool_ramming_volume = 10
|
||||
filament_notes = ""
|
||||
filament_purge_multiplier = 100%
|
||||
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_length_toolchange = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_restart_extra_toolchange = nil
|
||||
filament_retract_speed = nil
|
||||
filament_seam_gap_distance = nil
|
||||
filament_settings_id = ""
|
||||
filament_shrinkage_compensation_xy = -0.5%
|
||||
filament_shrinkage_compensation_z = 0%
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 201
|
||||
filament_stamping_distance = 0
|
||||
filament_stamping_loading_speed = 20
|
||||
filament_toolchange_delay = 0
|
||||
filament_travel_lift_before_obstacle = nil
|
||||
filament_travel_max_lift = nil
|
||||
filament_travel_ramping_lift = nil
|
||||
filament_travel_slope = nil
|
||||
filament_type = ASA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 20
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = RatRig
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 110
|
||||
first_layer_temperature = 270
|
||||
full_fan_speed_layer = 2
|
||||
idle_temperature = nil
|
||||
inherits =
|
||||
max_fan_speed = 40
|
||||
min_fan_speed = 30
|
||||
min_print_speed = 15
|
||||
overhang_fan_speed_0 = 70
|
||||
overhang_fan_speed_1 = 40
|
||||
overhang_fan_speed_2 = 40
|
||||
overhang_fan_speed_3 = 30
|
||||
slowdown_below_layer_time = 13
|
||||
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.015{endif}{if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.012{endif}{if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.012{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.01{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.005{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.005{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.015{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.012{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.012{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.018{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.015{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.015{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.015{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.01{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.01{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.018{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.015{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.015{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.018{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.018{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.018{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.015{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.015{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}
|
||||
temperature = 275
|
||||
|
||||
@@ -0,0 +1,81 @@
|
||||
[filament:PunkFil PETG @0.4 V2]
|
||||
bed_temperature = 80
|
||||
bridge_fan_speed = 80
|
||||
chamber_minimal_temperature = 0
|
||||
chamber_temperature = 0
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.4
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 2
|
||||
enable_dynamic_fan_speeds = 0
|
||||
end_filament_gcode = ""
|
||||
extrusion_multiplier = 0.93
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 6
|
||||
filament_abrasive = 0
|
||||
filament_colour = #ceff00
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 24.5
|
||||
filament_density = 1.27
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_infill_max_crossing_speed = 0
|
||||
filament_infill_max_speed = 0
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 30
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_multitool_ramming = 0
|
||||
filament_multitool_ramming_flow = 10
|
||||
filament_multitool_ramming_volume = 10
|
||||
filament_notes = ""
|
||||
filament_purge_multiplier = 100%
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = 1.5
|
||||
filament_retract_length_toolchange = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_restart_extra_toolchange = nil
|
||||
filament_retract_speed = nil
|
||||
filament_seam_gap_distance = nil
|
||||
filament_settings_id = ""
|
||||
filament_shrinkage_compensation_xy = 0%
|
||||
filament_shrinkage_compensation_z = 0%
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_stamping_distance = 0
|
||||
filament_stamping_loading_speed = 20
|
||||
filament_toolchange_delay = 0
|
||||
filament_travel_lift_before_obstacle = nil
|
||||
filament_travel_max_lift = nil
|
||||
filament_travel_ramping_lift = nil
|
||||
filament_travel_slope = nil
|
||||
filament_type = PETG
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = RatRig
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 80
|
||||
first_layer_temperature = 235
|
||||
full_fan_speed_layer = 0
|
||||
idle_temperature = nil
|
||||
inherits =
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 20
|
||||
overhang_fan_speed_0 = 80
|
||||
overhang_fan_speed_1 = 70
|
||||
overhang_fan_speed_2 = 60
|
||||
overhang_fan_speed_3 = 60
|
||||
slowdown_below_layer_time = 4
|
||||
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_300_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.047{endif}{if printer_notes=~/.*(RR_VC4_300_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.045{endif}{if printer_notes=~/.*(RR_VC4_300_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.043{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.047{endif}{if printer_notes=~/.*(RR_VC4_400_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.053{endif}{if printer_notes=~/.*(RR_VC4_400_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_400_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_400_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.045{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.053{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_500_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.055{endif}{if printer_notes=~/.*(RR_VC4_500_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.052{endif}{if printer_notes=~/.*(RR_VC4_500_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.052{endif}{if printer_notes=~/.*(RR_VC4_500_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.055{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.052{endif}
|
||||
temperature = 235
|
||||
|
||||
@@ -0,0 +1,84 @@
|
||||
[filament:PunkFil PETG @0.5 V2]
|
||||
bed_temperature = 80
|
||||
bridge_fan_speed = 80
|
||||
chamber_minimal_temperature = 0
|
||||
chamber_temperature = 0
|
||||
compatible_printers =
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.5
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 2
|
||||
enable_dynamic_fan_speeds = 1
|
||||
end_filament_gcode = ""
|
||||
extrusion_multiplier = 0.93
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 8
|
||||
filament_abrasive = 0
|
||||
filament_colour = #ceff00
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 24.5
|
||||
filament_density = 1.27
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_infill_max_crossing_speed = 0
|
||||
filament_infill_max_speed = 0
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 30
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_multitool_ramming = 0
|
||||
filament_multitool_ramming_flow = 10
|
||||
filament_multitool_ramming_volume = 10
|
||||
filament_notes = ""
|
||||
filament_purge_multiplier = 100%
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = 1.5
|
||||
filament_retract_length_toolchange = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_restart_extra_toolchange = nil
|
||||
filament_retract_speed = nil
|
||||
filament_seam_gap_distance = nil
|
||||
filament_settings_id = ""
|
||||
filament_shrinkage_compensation_xy = 0%
|
||||
filament_shrinkage_compensation_z = 0%
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_stamping_distance = 0
|
||||
filament_stamping_loading_speed = 20
|
||||
filament_toolchange_delay = 0
|
||||
filament_travel_lift_before_obstacle = nil
|
||||
filament_travel_max_lift = nil
|
||||
filament_travel_ramping_lift = nil
|
||||
filament_travel_slope = nil
|
||||
filament_type = PETG
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = RatRig
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 80
|
||||
first_layer_temperature = 260
|
||||
full_fan_speed_layer = 0
|
||||
idle_temperature = nil
|
||||
inherits =
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 20
|
||||
overhang_fan_speed_0 = 80
|
||||
overhang_fan_speed_1 = 70
|
||||
overhang_fan_speed_2 = 60
|
||||
overhang_fan_speed_3 = 60
|
||||
slowdown_below_layer_time = 12
|
||||
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_300_XY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.047{endif}{if printer_notes=~/.*(RR_VC4_300_HY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.045{endif}{if printer_notes=~/.*(RR_VC4_300_HY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.043{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.047{endif}{if printer_notes=~/.*(RR_VC4_400_XY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.053{endif}{if printer_notes=~/.*(RR_VC4_400_XY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_400_HY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_400_HY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.045{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.053{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_500_XY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.055{endif}{if printer_notes=~/.*(RR_VC4_500_XY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.052{endif}{if printer_notes=~/.*(RR_VC4_500_HY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.052{endif}{if printer_notes=~/.*(RR_VC4_500_HY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.055{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.052{endif}
|
||||
temperature = 260
|
||||
|
||||
@@ -0,0 +1,81 @@
|
||||
[filament:PunkFil PETG @0.6 V2]
|
||||
bed_temperature = 80
|
||||
bridge_fan_speed = 80
|
||||
chamber_minimal_temperature = 0
|
||||
chamber_temperature = 0
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.6
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 2
|
||||
enable_dynamic_fan_speeds = 1
|
||||
end_filament_gcode = ""
|
||||
extrusion_multiplier = 0.93
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 15
|
||||
filament_abrasive = 0
|
||||
filament_colour = #ceff00
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 24.5
|
||||
filament_density = 1.27
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_infill_max_crossing_speed = 140
|
||||
filament_infill_max_speed = 200
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 30
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_multitool_ramming = 0
|
||||
filament_multitool_ramming_flow = 10
|
||||
filament_multitool_ramming_volume = 10
|
||||
filament_notes = ""
|
||||
filament_purge_multiplier = 100%
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = 1.5
|
||||
filament_retract_length_toolchange = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_restart_extra_toolchange = nil
|
||||
filament_retract_speed = nil
|
||||
filament_seam_gap_distance = nil
|
||||
filament_settings_id = ""
|
||||
filament_shrinkage_compensation_xy = 0%
|
||||
filament_shrinkage_compensation_z = 0%
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_stamping_distance = 0
|
||||
filament_stamping_loading_speed = 20
|
||||
filament_toolchange_delay = 0
|
||||
filament_travel_lift_before_obstacle = nil
|
||||
filament_travel_max_lift = nil
|
||||
filament_travel_ramping_lift = nil
|
||||
filament_travel_slope = nil
|
||||
filament_type = PETG
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = RatRig
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 80
|
||||
first_layer_temperature = 245
|
||||
full_fan_speed_layer = 0
|
||||
idle_temperature = nil
|
||||
inherits =
|
||||
max_fan_speed = 70
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 15
|
||||
overhang_fan_speed_0 = 60
|
||||
overhang_fan_speed_1 = 60
|
||||
overhang_fan_speed_2 = 40
|
||||
overhang_fan_speed_3 = 40
|
||||
slowdown_below_layer_time = 12
|
||||
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.012{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.012{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.033{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.033{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}
|
||||
temperature = 250
|
||||
|
||||
@@ -0,0 +1,45 @@
|
||||
[filament:PunkFil PETG CF 10 VC3 @RatRig]
|
||||
filament_vendor = RatRig
|
||||
filament_type = PETG
|
||||
bed_temperature = 80
|
||||
bridge_fan_speed = 40
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
end_filament_gcode = ;Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.93
|
||||
fan_always_on = 0
|
||||
filament_colour = #323232
|
||||
filament_cost = 48
|
||||
filament_density = 1.27
|
||||
filament_diameter = 1.75
|
||||
filament_enable_toolchange_part_fan = 0
|
||||
filament_enable_toolchange_temp = 0
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_speed = 250
|
||||
filament_max_volumetric_speed = 20
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_layer_change = 1
|
||||
filament_retract_length = 0.8
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 1000
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 80
|
||||
full_fan_speed_layer = 0
|
||||
max_fan_speed = 0
|
||||
min_fan_speed = 0
|
||||
min_print_speed = 20
|
||||
fan_below_layer_time = 5
|
||||
slowdown_below_layer_time = 12
|
||||
start_filament_gcode = ";Filament gcode\nSET_PRESSURE_ADVANCE ADVANCE=0.038"
|
||||
temperature = 230
|
||||
first_layer_temperature = 230
|
||||
compatible_printers_condition = printer_model=~/.*VC3_300*/ or printer_model=~/.*VC3_400*/ or printer_model=~/.*VC3_500*/ or printer_notes=~/.*VCore4XYsettings*/
|
||||
|
||||
@@ -0,0 +1,45 @@
|
||||
[filament:PunkFil PETG VC3 @RatRig]
|
||||
filament_vendor = RatRig
|
||||
filament_type = PETG
|
||||
bed_temperature = 80
|
||||
bridge_fan_speed = 60
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
end_filament_gcode = ;Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 0.93
|
||||
fan_always_on = 1
|
||||
filament_colour = #ceff00
|
||||
filament_cost = 24.5
|
||||
filament_density = 1.27
|
||||
filament_diameter = 1.75
|
||||
filament_enable_toolchange_part_fan = 0
|
||||
filament_enable_toolchange_temp = 0
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_speed = 0
|
||||
filament_max_volumetric_speed = 40
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_layer_change = 1
|
||||
filament_retract_length = 0.8
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 80
|
||||
first_layer_temperature = 235
|
||||
full_fan_speed_layer = 0
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 20
|
||||
fan_below_layer_time = 6
|
||||
slowdown_below_layer_time = 4
|
||||
start_filament_gcode = ";Filament gcode\nSET_PRESSURE_ADVANCE ADVANCE=0.026"
|
||||
temperature = 235
|
||||
compatible_printers_condition = printer_model=~/.*VC3_300*/ or printer_model=~/.*VC3_400*/ or printer_model=~/.*VC3_500*/ or printer_notes=~/.*VCore4XYsettings*/
|
||||
|
||||
@@ -0,0 +1,81 @@
|
||||
[filament:PunkFil PETG-CF @0.4 V2]
|
||||
bed_temperature = 90
|
||||
bridge_fan_speed = 30
|
||||
chamber_minimal_temperature = 0
|
||||
chamber_temperature = 0
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.4
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
enable_dynamic_fan_speeds = 0
|
||||
end_filament_gcode = "; Filament-specific end gcode"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 5
|
||||
filament_abrasive = 0
|
||||
filament_colour = #BBBBBB
|
||||
filament_cooling_final_speed = 2
|
||||
filament_cooling_initial_speed = 3
|
||||
filament_cooling_moves = 1
|
||||
filament_cost = 54.99
|
||||
filament_density = 1.27
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_infill_max_crossing_speed = 0
|
||||
filament_infill_max_speed = 0
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 14
|
||||
filament_loading_speed_start = 19
|
||||
filament_max_volumetric_speed = 20
|
||||
filament_minimal_purge_on_wipe_tower = 0
|
||||
filament_multitool_ramming = 0
|
||||
filament_multitool_ramming_flow = 10
|
||||
filament_multitool_ramming_volume = 10
|
||||
filament_notes = ""
|
||||
filament_purge_multiplier = 100%
|
||||
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_length_toolchange = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_restart_extra_toolchange = nil
|
||||
filament_retract_speed = nil
|
||||
filament_seam_gap_distance = nil
|
||||
filament_settings_id = ""
|
||||
filament_shrinkage_compensation_xy = 0%
|
||||
filament_shrinkage_compensation_z = 0%
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 201
|
||||
filament_stamping_distance = 0
|
||||
filament_stamping_loading_speed = 20
|
||||
filament_toolchange_delay = 0
|
||||
filament_travel_lift_before_obstacle = nil
|
||||
filament_travel_max_lift = nil
|
||||
filament_travel_ramping_lift = nil
|
||||
filament_travel_slope = nil
|
||||
filament_type = PETG
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 20
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = RatRig
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 85
|
||||
first_layer_temperature = 260
|
||||
full_fan_speed_layer = 5
|
||||
idle_temperature = nil
|
||||
inherits =
|
||||
max_fan_speed = 30
|
||||
min_fan_speed = 30
|
||||
min_print_speed = 20
|
||||
overhang_fan_speed_0 = 0
|
||||
overhang_fan_speed_1 = 0
|
||||
overhang_fan_speed_2 = 0
|
||||
overhang_fan_speed_3 = 0
|
||||
slowdown_below_layer_time = 10
|
||||
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_300_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.047{endif}{if printer_notes=~/.*(RR_VC4_300_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.045{endif}{if printer_notes=~/.*(RR_VC4_300_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.043{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.047{endif}{if printer_notes=~/.*(RR_VC4_400_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.053{endif}{if printer_notes=~/.*(RR_VC4_400_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_400_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_400_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.045{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.053{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_500_XY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.055{endif}{if printer_notes=~/.*(RR_VC4_500_XY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.052{endif}{if printer_notes=~/.*(RR_VC4_500_HY_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.052{endif}{if printer_notes=~/.*(RR_VC4_500_HY_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_04N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.055{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_04N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.052{endif}
|
||||
temperature = 265
|
||||
|
||||
@@ -0,0 +1,85 @@
|
||||
[filament:PunkFil PETG-CF @0.5 V2]
|
||||
bed_temperature = 90
|
||||
bridge_fan_speed = 30
|
||||
chamber_minimal_temperature = 0
|
||||
chamber_temperature = 0
|
||||
compatible_printers =
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.5
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
enable_dynamic_fan_speeds = 0
|
||||
end_filament_gcode = "; Filament-specific end gcode"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 5
|
||||
filament_abrasive = 0
|
||||
filament_colour = #BBBBBB
|
||||
filament_cooling_final_speed = 2
|
||||
filament_cooling_initial_speed = 3
|
||||
filament_cooling_moves = 1
|
||||
filament_cost = 54.99
|
||||
filament_density = 1.27
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_infill_max_crossing_speed = 0
|
||||
filament_infill_max_speed = 0
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 14
|
||||
filament_loading_speed_start = 19
|
||||
filament_max_volumetric_speed = 20
|
||||
filament_minimal_purge_on_wipe_tower = 0
|
||||
filament_multitool_ramming = 0
|
||||
filament_multitool_ramming_flow = 10
|
||||
filament_multitool_ramming_volume = 10
|
||||
filament_notes = ""
|
||||
filament_purge_multiplier = 100%
|
||||
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_length_toolchange = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_restart_extra_toolchange = nil
|
||||
filament_retract_speed = nil
|
||||
filament_seam_gap_distance = nil
|
||||
filament_settings_id = ""
|
||||
filament_shrinkage_compensation_xy = 0%
|
||||
filament_shrinkage_compensation_z = 0%
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 201
|
||||
filament_stamping_distance = 0
|
||||
filament_stamping_loading_speed = 20
|
||||
filament_toolchange_delay = 0
|
||||
filament_travel_lift_before_obstacle = nil
|
||||
filament_travel_max_lift = nil
|
||||
filament_travel_ramping_lift = nil
|
||||
filament_travel_slope = nil
|
||||
filament_type = PETG
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 20
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = RatRig
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 85
|
||||
first_layer_temperature = 260
|
||||
full_fan_speed_layer = 5
|
||||
idle_temperature = nil
|
||||
inherits =
|
||||
max_fan_speed = 30
|
||||
min_fan_speed = 30
|
||||
min_print_speed = 20
|
||||
overhang_fan_speed_0 = 0
|
||||
overhang_fan_speed_1 = 0
|
||||
overhang_fan_speed_2 = 0
|
||||
overhang_fan_speed_3 = 0
|
||||
slowdown_below_layer_time = 10
|
||||
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_300_XY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.047{endif}{if printer_notes=~/.*(RR_VC4_300_HY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.045{endif}{if printer_notes=~/.*(RR_VC4_300_HY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.043{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.047{endif}{if printer_notes=~/.*(RR_VC4_400_XY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.053{endif}{if printer_notes=~/.*(RR_VC4_400_XY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_400_HY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_400_HY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.045{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.053{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_500_XY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.055{endif}{if printer_notes=~/.*(RR_VC4_500_XY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.052{endif}{if printer_notes=~/.*(RR_VC4_500_HY_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.052{endif}{if printer_notes=~/.*(RR_VC4_500_HY_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.05{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_05N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.055{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_05N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.052{endif}
|
||||
temperature = 265
|
||||
|
||||
|
||||
@@ -0,0 +1,81 @@
|
||||
[filament:PunkFil PETG-CF @0.6 V2]
|
||||
bed_temperature = 90
|
||||
bridge_fan_speed = 100
|
||||
chamber_minimal_temperature = 0
|
||||
chamber_temperature = 0
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.6
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 2
|
||||
enable_dynamic_fan_speeds = 0
|
||||
end_filament_gcode = "; Filament-specific end gcode"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 5
|
||||
filament_abrasive = 0
|
||||
filament_colour = #BBBBBB
|
||||
filament_cooling_final_speed = 2
|
||||
filament_cooling_initial_speed = 3
|
||||
filament_cooling_moves = 1
|
||||
filament_cost = 54.99
|
||||
filament_density = 1.27
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.75
|
||||
filament_infill_max_crossing_speed = 0
|
||||
filament_infill_max_speed = 0
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 14
|
||||
filament_loading_speed_start = 19
|
||||
filament_max_volumetric_speed = 20
|
||||
filament_minimal_purge_on_wipe_tower = 0
|
||||
filament_multitool_ramming = 0
|
||||
filament_multitool_ramming_flow = 10
|
||||
filament_multitool_ramming_volume = 10
|
||||
filament_notes = ""
|
||||
filament_purge_multiplier = 100%
|
||||
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_length_toolchange = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_restart_extra_toolchange = nil
|
||||
filament_retract_speed = nil
|
||||
filament_seam_gap_distance = nil
|
||||
filament_settings_id = ""
|
||||
filament_shrinkage_compensation_xy = 0%
|
||||
filament_shrinkage_compensation_z = 0%
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 201
|
||||
filament_stamping_distance = 0
|
||||
filament_stamping_loading_speed = 20
|
||||
filament_toolchange_delay = 0
|
||||
filament_travel_lift_before_obstacle = nil
|
||||
filament_travel_max_lift = nil
|
||||
filament_travel_ramping_lift = nil
|
||||
filament_travel_slope = nil
|
||||
filament_type = PETG
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 20
|
||||
filament_unloading_speed_start = 100
|
||||
filament_vendor = RatRig
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 85
|
||||
first_layer_temperature = 260
|
||||
full_fan_speed_layer = 2
|
||||
idle_temperature = nil
|
||||
inherits =
|
||||
max_fan_speed = 70
|
||||
min_fan_speed = 50
|
||||
min_print_speed = 20
|
||||
overhang_fan_speed_0 = 0
|
||||
overhang_fan_speed_1 = 0
|
||||
overhang_fan_speed_2 = 0
|
||||
overhang_fan_speed_3 = 0
|
||||
slowdown_below_layer_time = 14
|
||||
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.012{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.012{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.033{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.033{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}
|
||||
temperature = 265
|
||||
|
||||
Reference in New Issue
Block a user