Initial Profile Sources

2026-10-01 18:17:21 +00:00 · 2026-03-19 01:54:47 +00:00
parent 7e2e8f9d47
commit 1f7873734a
13374 changed files with 256890 additions and 0 deletions
@@ -0,0 +1,45 @@
+[filament:PunkFil PETG VC3 @RatRig]
+filament_vendor = RatRig
+filament_type = PETG
+bed_temperature = 80
+bridge_fan_speed = 60
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = ;Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.93
+fan_always_on = 1
+filament_colour = #ceff00
+filament_cost = 24.5
+filament_density = 1.27
+filament_diameter = 1.75
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_speed = 0
+filament_max_volumetric_speed = 40
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_layer_change = 1
+filament_retract_length = 0.8
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_wipe = nil
+first_layer_bed_temperature = 80
+first_layer_temperature = 235
+full_fan_speed_layer = 0
+max_fan_speed = 80
+min_fan_speed = 40
+min_print_speed = 20
+fan_below_layer_time = 6
+slowdown_below_layer_time = 4
+start_filament_gcode = ";Filament gcode\nSET_PRESSURE_ADVANCE ADVANCE=0.026" 
+temperature = 235
+compatible_printers_condition = printer_model=~/.*VC3_300*/ or printer_model=~/.*VC3_400*/ or printer_model=~/.*VC3_500*/ or printer_notes=~/.*VCore4XYsettings*/
+