Initial Profile Sources

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_300_HY 0.4.ini

@@ -0,0 +1,45 @@
+[print:0.2 QUALITY @ VC4_300_HY 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 2000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_300_HY_04N).*/
+default_acceleration = 10000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 10000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 25%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 10000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 10000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 4
+small_perimeter_speed = 230
+solid_infill_acceleration = 10000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+ 

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_300_HY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY @ VC4_300_HY 0.5]
+inherits = 0.2 QUALITY @ VC4_300_HY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_300_HY_05N).*/
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_300_HY 0.6.ini

@@ -0,0 +1,45 @@
+[print:0.2 QUALITY @ VC4_300_HY 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_300_HY_06N).*/
+default_acceleration = 10000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 10000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 10000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 10000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 10000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_300_IDEX 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_300_IDEX 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1500
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/
+default_acceleration = 5000
+elefant_foot_compensation = 0.2
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 25%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 5000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 4
+small_perimeter_speed = 230
+solid_infill_acceleration = 5000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = topmost
+top_solid_infill_acceleration = 1500
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_300_IDEX 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY @ VC4_300_IDEX 0.5]
+inherits = 0.2 QUALITY @ VC4_300_IDEX 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_300_IDEX_05N).*/
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_300_IDEX 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_300_IDEX 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 1500
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/
+default_acceleration = 5000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 5000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 5000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 1500
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_300_XY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_300_XY 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 2000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_300_XY_04N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 25%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 4
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000v
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_300_XY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY @ VC4_300_XY 0.5]
+inherits = 0.2 QUALITY @ VC4_300_XY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_300_XY_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_300_XY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_300_XY 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_300_XY_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_400_HY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_400_HY 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 2000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_400_HY_04N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 25%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 4
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_400_HY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY @ VC4_400_HY 0.5]
+inherits = 0.2 QUALITY @ VC4_400_HY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_400_HY_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_400_HY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_400_HY 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_400_HY_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_400_IDEX 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_400_IDEX 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1500
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_400_IDEX_04N).*/
+default_acceleration = 5000
+elefant_foot_compensation = 0.2
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 3500
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 25%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 5000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 3500
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 4
+small_perimeter_speed = 230
+solid_infill_acceleration = 5000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = topmost
+top_solid_infill_acceleration = 1500
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_400_IDEX 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY @ VC4_400_IDEX 0.5]
+inherits = 0.2 QUALITY @ VC4_400_IDEX 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_400_IDEX_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_400_IDEX 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_400_IDEX 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 1500
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6  && printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/
+default_acceleration = 5000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 3500
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 5000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 3500
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 5000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 1500
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_400_XY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_400_XY 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 2000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_400_XY_04N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 3500
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 25%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 3500
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 4
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_400_XY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY @ VC4_400_XY 0.5]
+inherits = 0.2 QUALITY @ VC4_400_XY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_400_XY_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_400_XY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_400_XY 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_400_XY_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 3500
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 3500
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_500_HY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_500_HY 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 2000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_500_HY_04N).*/
+default_acceleration = 4000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 4000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 25%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 4000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 4
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_500_HY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY @ VC4_500_HY 0.5]
+inherits = 0.2 QUALITY @ VC4_500_HY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_500_HY_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_500_HY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_500_HY 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_500_HY_06N).*/
+default_acceleration = 4000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 4000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 4000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_500_IDEX 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_500_IDEX 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1500
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_500_IDEX_04N).*/
+default_acceleration = 5000
+elefant_foot_compensation = 0.2
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 3000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 25%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 5000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 3000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 4
+small_perimeter_speed = 230
+solid_infill_acceleration = 5000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = topmost
+top_solid_infill_acceleration = 1500
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_500_IDEX 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY @ VC4_500_IDEX 0.5]
+inherits = 0.2 QUALITY @ VC4_500_IDEX 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_500_IDEX_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_500_IDEX 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_500_IDEX 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 1500
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/
+default_acceleration = 5000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 2500
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 5000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 2500
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 5000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 1500
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_500_XY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_500_XY 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 2000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_500_XY_04N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 2500
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 25%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 2500
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 4
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 2500
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.7
+travel_acceleration = 10000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_500_XY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY @ VC4_500_XY 0.5]
+inherits = 0.2 QUALITY @ VC4_500_XY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_500_XY_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY @ VC4_500_XY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY @ VC4_500_XY 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_500_XY_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 2500
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 2500
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 2500
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_300_HY 0.4.ini

@@ -0,0 +1,45 @@
+[print:0.2 QUALITY SPEED @ VC4_300_HY 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 2000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_300_HY_04N).*/
+default_acceleration = 10000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 10000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 10%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 10000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 10000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 10000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+ 

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_300_HY 0.5.ini

@@ -0,0 +1,11 @@
+[print:0.2 QUALITY SPEED @ VC4_300_HY 0.5]
+inherits = 0.2 QUALITY SPEED @ VC4_300_HY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_300_HY_05N).*/
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_300_HY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_300_HY 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_300_HY_06N).*/
+default_acceleration = 10000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 10000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 10000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 10000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 10000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_300_IDEX 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_300_IDEX 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1500
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4  && printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/
+default_acceleration = 5000
+elefant_foot_compensation = 0.2
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 25%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 5000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 5000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = topmost
+top_solid_infill_acceleration = 1500
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_300_IDEX 0.5.ini

@@ -0,0 +1,13 @@
+[print:0.2 QUALITY SPEED @ VC4_300_IDEX 0.5]
+inherits = 0.2 QUALITY SPEED @ VC4_300_IDEX 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_300_IDEX_05N).*/
+
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_300_IDEX 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_300_IDEX 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 1500
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6  && printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/
+default_acceleration = 5000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 5000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 5000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 1500
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_300_XY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_300_XY 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 2000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_300_XY_04N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 10%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_300_XY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY SPEED @ VC4_300_XY 0.5]
+inherits = 0.2 QUALITY SPEED @ VC4_300_XY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_300_XY_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_300_XY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_300_XY 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_300_XY_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_400_HY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_400_HY 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 2000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_400_HY_04N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 10%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_400_HY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY SPEED @ VC4_400_HY 0.5]
+inherits = 0.2 QUALITY SPEED @ VC4_400_HY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_400_HY_05N).*/
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_400_HY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_400_HY 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_400_HY_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_400_IDEX 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_400_IDEX 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1500
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_400_IDEX_04N).*/
+default_acceleration = 5000
+elefant_foot_compensation = 0.2
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 3500
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 25%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 5000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 3500
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 5000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = topmost
+top_solid_infill_acceleration = 1500
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_400_IDEX 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY SPEED @ VC4_400_IDEX 0.5]
+inherits = 0.2 QUALITY SPEED @ VC4_400_IDEX 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_400_IDEX_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_400_IDEX 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_400_IDEX 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 1500
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/
+default_acceleration = 5000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 3500
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 5000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 3500
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 5000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 1500
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_400_XY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_400_XY 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 2000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_400_XY_04N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 3500
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 10%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 3500
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_400_XY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY SPEED @ VC4_400_XY 0.5]
+inherits = 0.2 QUALITY SPEED @ VC4_400_XY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_400_XY_05N).*/
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_400_XY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_400_XY 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_400_XY_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 3500
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 3500
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_500_HY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_500_HY 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 2000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_500_HY_04N).*/
+default_acceleration = 4000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 4000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 10%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 4000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_500_HY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY SPEED @ VC4_500_HY 0.5]
+inherits = 0.2 QUALITY SPEED @ VC4_500_HY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_500_HY_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_500_HY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_500_HY 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_500_HY_06N).*/
+default_acceleration = 4000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 4000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 4000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_500_IDEX 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_500_IDEX 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1500
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_500_IDEX_04N).*/
+default_acceleration = 5000
+elefant_foot_compensation = 0.2
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 3000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 25%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 5000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 3000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 5000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = topmost
+top_solid_infill_acceleration = 1500
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_500_IDEX 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY SPEED @ VC4_500_IDEX 0.5]
+inherits = 0.2 QUALITY SPEED @ VC4_500_IDEX 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_500_IDEX_05N).*/
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_500_IDEX 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_500_IDEX 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1500
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/
+default_acceleration = 5000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 2500
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 5000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 2500
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 5000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = topmost
+top_solid_infill_acceleration = 1500
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_500_XY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_500_XY 0.4]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 2000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_500_XY_04N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 2500
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 10%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 75%
+perimeter_acceleration = 2500
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 2500
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 10000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_500_XY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.2 QUALITY SPEED @ VC4_500_XY 0.5]
+inherits = 0.2 QUALITY SPEED @ VC4_500_XY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_500_XY_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.2 QUALITY SPEED @ VC4_500_XY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.2 QUALITY SPEED @ VC4_500_XY 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_500_XY_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 2500
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.2
+max_print_speed = 400
+notes = RR_QUALITY
+overhang_speed_3 = 50%
+perimeter_acceleration = 2500
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 2500
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_300_HY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_300_HY 0.4]
+inherits = *common*
+bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 2000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_300_HY_04N).*/
+default_acceleration = 12000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 12000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 10%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 12000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.25
+max_print_speed = 400
+notes = RR_SPEED
+overhang_speed_3 = 75%
+perimeter_acceleration = 12000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 12000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 12000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 20000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_300_HY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.25 SPEED @ VC4_300_HY 0.5]
+inherits = 0.25 SPEED @ VC4_300_HY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_300_HY_05N).*/
+
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_300_HY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_300_HY 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_300_HY_06N).*/
+default_acceleration = 12000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 12000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 12000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.25
+max_print_speed = 400
+notes = RR_SPEED
+overhang_speed_3 = 50%
+perimeter_acceleration = 12000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 12000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 12000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 20000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_300_IDEX 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_300_IDEX 0.4]
+inherits = *common*
+bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 8000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4  && printer_notes=~/.*(RR_VC4_300_IDEX_04N).*/
+default_acceleration = 8000
+elefant_foot_compensation = 0.2
+enable_dynamic_overhang_speeds = 0
+external_perimeter_acceleration = 8000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 500
+extrusion_width = 0.45
+fill_density = 10%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 80
+gap_fill_speed = 500
+infill_acceleration = 8000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 500
+layer_height = 0.25
+max_print_speed = 500
+notes = RR_SPEED
+overhang_speed_3 = 75%
+perimeter_acceleration = 8000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 500
+perimeters = 2
+small_perimeter_speed = 500
+solid_infill_acceleration = 8000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 500
+support_material_speed = 500
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = topmost
+top_solid_infill_acceleration = 8000
+top_solid_infill_speed = 500
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_300_IDEX 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.25 SPEED @ VC4_300_IDEX 0.5]
+inherits = 0.25 SPEED @ VC4_300_IDEX 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_300_IDEX_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_300_IDEX 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_300_IDEX 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6  && printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/
+default_acceleration = 8000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 8000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 8000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.25
+max_print_speed = 400
+notes = RR_SPEED
+overhang_speed_3 = 50%
+perimeter_acceleration = 8000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 8000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 8000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_300_XY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_300_XY 0.4]
+inherits = *common*
+bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 2000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_300_XY_04N).*/
+default_acceleration = 8000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 8000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 280
+extrusion_width = 0.45
+fill_density = 10%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 8000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 280
+layer_height = 0.25
+max_print_speed = 400
+notes = RR_SPEED
+overhang_speed_3 = 75%
+perimeter_acceleration = 8000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 8000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 8000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_300_XY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.25 SPEED @ VC4_300_XY 0.5]
+inherits = 0.25 SPEED @ VC4_300_XY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_300_XY_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_300_XY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_300_XY 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_300_XY_06N).*/
+default_acceleration = 8000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 8000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 8000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.25
+max_print_speed = 400
+notes = RR_SPEED
+overhang_speed_3 = 50%
+perimeter_acceleration = 8000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 8000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 8000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_400_HY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_400_HY 0.4]
+inherits = *common*
+bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 10000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_400_HY_04N).*/
+default_acceleration = 10000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 0
+external_perimeter_acceleration = 10000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 500
+extrusion_width = 0.45
+fill_density = 10%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 80
+gap_fill_speed = 500
+infill_acceleration = 10000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 500
+layer_height = 0.25
+max_print_speed = 500
+notes = RR_SPEED
+overhang_speed_3 = 75%
+perimeter_acceleration = 10000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 500
+perimeters = 2
+small_perimeter_speed = 500
+solid_infill_acceleration = 10000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 500
+support_material_speed = 500
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 10000
+top_solid_infill_speed = 500
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 20000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_400_HY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.25 SPEED @ VC4_400_HY 0.5]
+inherits = 0.25 SPEED @ VC4_400_HY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_400_HY_05N).*/
+
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_400_HY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_400_HY 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 10000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_400_HY_06N).*/
+default_acceleration = 10000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 10000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 10000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.25
+max_print_speed = 400
+notes = RR_SPEED
+overhang_speed_3 = 50%
+perimeter_acceleration = 10000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 10000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 10000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 20000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_400_IDEX 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_400_IDEX 0.4]
+inherits = *common*
+bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 6000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_400_IDEX_04N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.2
+enable_dynamic_overhang_speeds = 0
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 500
+extrusion_width = 0.45
+fill_density = 10%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 80
+gap_fill_speed = 500
+infill_acceleration = 6000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 500
+layer_height = 0.25
+max_print_speed = 500
+notes = RR_SPEED
+overhang_speed_3 = 75%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 500
+perimeters = 2
+small_perimeter_speed = 500
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 500
+support_material_speed = 500
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = topmost
+top_solid_infill_acceleration = 6000
+top_solid_infill_speed = 500
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_400_IDEX 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.25 SPEED @ VC4_400_IDEX 0.5]
+inherits = 0.25 SPEED @ VC4_400_IDEX 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_400_IDEX_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_400_IDEX 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_400_IDEX 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 6000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.25
+max_print_speed = 400
+notes = RR_SPEED
+overhang_speed_3 = 50%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 6000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 12000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_400_XY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_400_XY 0.4]
+inherits = *common*
+bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 6000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_400_XY_04N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 0
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 500
+extrusion_width = 0.45
+fill_density = 10%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 80
+gap_fill_speed = 500
+infill_acceleration = 6000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 500
+layer_height = 0.25
+max_print_speed = 500
+notes = RR_SPEED
+overhang_speed_3 = 75%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 500
+perimeters = 2
+small_perimeter_speed = 500
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 500
+support_material_speed = 500
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 6000
+top_solid_infill_speed = 500
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 12000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_400_XY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.25 SPEED @ VC4_400_XY 0.5]
+inherits = 0.25 SPEED @ VC4_400_XY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_400_XY_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_400_XY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_400_XY 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 6000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_400_XY_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.25
+max_print_speed = 400
+notes = RR_SPEED
+overhang_speed_3 = 50%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 6000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 12000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_500_HY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_500_HY 0.4]
+inherits = *common*
+bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 6000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_500_HY_04N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 0
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 500
+extrusion_width = 0.45
+fill_density = 10%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 80
+gap_fill_speed = 500
+infill_acceleration = 6000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 500
+layer_height = 0.25
+max_print_speed = 500
+notes = RR_SPEED
+overhang_speed_3 = 75%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 500
+perimeters = 2
+small_perimeter_speed = 500
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 500
+support_material_speed = 500
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 6000
+top_solid_infill_speed = 500
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_500_HY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.25 SPEED @ VC4_500_HY 0.5]
+inherits = 0.25 SPEED @ VC4_500_HY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_500_HY_05N).*/
+
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_500_HY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_500_HY 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 6000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_500_HY_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.25
+max_print_speed = 400
+notes = RR_SPEED
+overhang_speed_3 = 50%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 6000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_500_IDEX 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_500_IDEX 0.4]
+inherits = *common*
+bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 4000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_500_IDEX_04N).*/
+default_acceleration = 4000
+elefant_foot_compensation = 0.2
+enable_dynamic_overhang_speeds = 0
+external_perimeter_acceleration = 4000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 500
+extrusion_width = 0.45
+fill_density = 10%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 80
+gap_fill_speed = 500
+infill_acceleration = 4000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 500
+layer_height = 0.25
+max_print_speed = 500
+notes = RR_SPEED
+overhang_speed_3 = 75%
+perimeter_acceleration = 4000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 500
+perimeters = 2
+small_perimeter_speed = 500
+solid_infill_acceleration = 4000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 500
+support_material_speed = 500
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = topmost
+top_solid_infill_acceleration = 4000
+top_solid_infill_speed = 500
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_500_IDEX 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.25 SPEED @ VC4_500_IDEX 0.5]
+inherits = 0.25 SPEED @ VC4_500_IDEX 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_500_IDEX_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_500_IDEX 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_500_IDEX 0.6]
+inherits = *common*
+bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 4000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/
+default_acceleration = 4000
+elefant_foot_compensation = 0.2
+enable_dynamic_overhang_speeds = 0
+external_perimeter_acceleration = 4000
+external_perimeter_extrusion_width = 0.65
+external_perimeter_speed = 500
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.8
+first_layer_speed = 80
+gap_fill_speed = 500
+infill_acceleration = 4000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.65
+infill_speed = 500
+layer_height = 0.25
+max_print_speed = 500
+notes = RR_SPEED
+overhang_speed_3 = 75%
+perimeter_acceleration = 4000
+perimeter_extrusion_width = 0.65
+perimeter_speed = 500
+perimeters = 2
+small_perimeter_speed = 500
+solid_infill_acceleration = 4000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 500
+support_material_speed = 500
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = topmost
+top_solid_infill_acceleration = 4000
+top_solid_infill_speed = 500
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_500_XY 0.4.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_500_XY 0.4]
+inherits = *common*
+bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 6000
+bridge_flow_ratio = 1
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 && printer_notes=~/.*(RR_VC4_500_XY_04N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 0
+external_perimeter_acceleration = 4000
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 500
+extrusion_width = 0.45
+fill_density = 10%
+first_layer_extrusion_width = 0.5
+first_layer_speed = 80
+gap_fill_speed = 500
+infill_acceleration = 6000
+infill_anchor = 2
+infill_anchor_max = 12
+infill_extrusion_width = 0.45
+infill_speed = 500
+layer_height = 0.25
+max_print_speed = 500
+notes = RR_SPEED
+overhang_speed_3 = 75%
+perimeter_acceleration = 4000
+perimeter_extrusion_width = 0.45
+perimeter_speed = 500
+perimeters = 2
+small_perimeter_speed = 500
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 500
+support_material_speed = 500
+top_infill_extrusion_width = 0.42
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 4000
+top_solid_infill_speed = 500
+top_solid_layers = 3
+top_solid_min_thickness = 0.7
+travel_acceleration = 10000
+
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_500_XY 0.5.ini

@@ -0,0 +1,12 @@
+[print:0.25 SPEED @ VC4_500_XY 0.5]
+inherits = 0.25 SPEED @ VC4_500_XY 0.4
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.55
+first_layer_extrusion_width = 0.55
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.50
+compatible_printers_condition = nozzle_diameter[0]==0.5 && printer_notes=~/.*(RR_VC4_500_XY_05N).*/
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.25 SPEED @ VC4_500_XY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.25 SPEED @ VC4_500_XY 0.6]
+inherits = *common*
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_500_XY_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 4000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 10%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.25
+max_print_speed = 400
+notes = RR_SPEED
+overhang_speed_3 = 50%
+perimeter_acceleration = 4000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 2
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 4000
+top_solid_infill_speed = 140
+top_solid_layers = 3
+top_solid_min_thickness = 0.9
+travel_acceleration = 10000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.3 BIG @ VC4_300_HY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.3 BIG @ VC4_300_HY 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_300_HY_06N).*/
+default_acceleration = 10000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 10000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 10000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.3
+max_print_speed = 400
+notes = RR_BIG
+overhang_speed_3 = 50%
+perimeter_acceleration = 10000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 10000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.3 BIG @ VC4_300_IDEX 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.3 BIG @ VC4_300_IDEX 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 1500
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6  && printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/
+default_acceleration = 5000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 5000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.3
+max_print_speed = 400
+notes = RR_BIG
+overhang_speed_3 = 50%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 5000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 1500
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.3 BIG @ VC4_300_XY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.3 BIG @ VC4_300_XY 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_300_XY_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.3
+max_print_speed = 400
+notes = RR_BIG
+overhang_speed_3 = 50%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.3 BIG @ VC4_400_HY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.3 BIG @ VC4_400_HY 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_400_HY_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.3
+max_print_speed = 400
+notes = RR_BIG
+overhang_speed_3 = 50%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.3 BIG @ VC4_400_IDEX 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.3 BIG @ VC4_400_IDEX 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 1500
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/
+default_acceleration = 5000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 3500
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 5000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.3
+max_print_speed = 400
+notes = RR_BIG
+overhang_speed_3 = 50%
+perimeter_acceleration = 3500
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 5000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 1500
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.3 BIG @ VC4_400_XY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.3 BIG @ VC4_400_XY 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_400_XY_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 6000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.3
+max_print_speed = 400
+notes = RR_BIG
+overhang_speed_3 = 50%
+perimeter_acceleration = 6000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.3 BIG @ VC4_500_HY 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.3 BIG @ VC4_500_HY 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_500_HY_06N).*/
+default_acceleration = 4000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 4000
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.3
+max_print_speed = 400
+notes = RR_BIG
+overhang_speed_3 = 50%
+perimeter_acceleration = 4000
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 3000
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.3 BIG @ VC4_500_IDEX 0.6.ini

@@ -0,0 +1,46 @@
+[print:0.3 BIG @ VC4_500_IDEX 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 1500
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/
+default_acceleration = 5000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 2500
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 5000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.3
+max_print_speed = 400
+notes = RR_BIG
+overhang_speed_3 = 50%
+perimeter_acceleration = 2500
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 5000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 1500
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+

profile_sources/non-prusa-fff/RatRig/print/0.3 BIG @ VC4_500_XY 0.6.ini

@@ -0,0 +1,47 @@
+[print:0.3 BIG @ VC4_500_XY 0.6]
+inherits = *common*
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
+bridge_acceleration = 2000
+bridge_flow_ratio = 0.9
+brim_width = 0
+compatible_printers_condition = nozzle_diameter[0]==0.6 && printer_notes=~/.*(RR_VC4_500_XY_06N).*/
+default_acceleration = 6000
+elefant_foot_compensation = 0.1
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 2500
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 280
+extrusion_width = 0.65
+fill_density = 25%
+first_layer_extrusion_width = 0.68
+first_layer_speed = 40
+gap_fill_speed = 170
+infill_acceleration = 6000
+infill_anchor = 2.5
+infill_anchor_max = 20
+infill_extrusion_width = 0.65
+infill_speed = 280
+layer_height = 0.3
+max_print_speed = 400
+notes = RR_BIG
+overhang_speed_3 = 50%
+perimeter_acceleration = 2500
+perimeter_extrusion_width = 0.62
+perimeter_speed = 350
+perimeters = 3
+small_perimeter_speed = 230
+solid_infill_acceleration = 6000
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 280
+support_material_speed = 170
+top_infill_extrusion_width = 0.5
+top_one_perimeter_type = top
+top_solid_infill_acceleration = 2500
+top_solid_infill_speed = 140
+top_solid_layers = 5
+top_solid_min_thickness = 0.9
+travel_acceleration = 15000
+ 
+ 
+

profile_sources/non-prusa-fff/RatRig/print/BIG_0.30mm_Nozzle_0.6_VM.ini

@@ -0,0 +1,9 @@
+[print:BIG_0.30mm_Nozzle_0.6_VM]
+inherits = *common_RatRigOLD*; *0.6nozzle*; *VM1_SPEED*; *0.30mm*
+compatible_printers_condition = printer_notes=~/.*VMinionsettings*/ and nozzle_diameter[0]==0.6
+enable_dynamic_overhang_speeds = 1   
+overhang_speed_0 = 10
+overhang_speed_1 = 20
+overhang_speed_2 = 30
+overhang_speed_3 = 70
+

profile_sources/non-prusa-fff/RatRig/print/QUALITY_0.20mm_Nozzle_0.4_VC3.ini

@@ -0,0 +1,4 @@
+[print:QUALITY_0.20mm_Nozzle_0.4_VC3]
+inherits = *common_RatRigOLD*; *0.4nozzle*; *VC3_SPEED*; *0.20mm*
+compatible_printers_condition = printer_notes=~/.*VCore3settings*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/RatRig/print/QUALITY_0.20mm_Nozzle_0.4_VM.ini

@@ -0,0 +1,9 @@
+[print:QUALITY_0.20mm_Nozzle_0.4_VM]
+inherits = *common_RatRigOLD*; *0.4nozzle*; *VM1_SPEED*; *0.20mm*
+compatible_printers_condition = printer_notes=~/.*VMinionsettings*/ and nozzle_diameter[0]==0.4
+enable_dynamic_overhang_speeds = 1   
+overhang_speed_0 = 15
+overhang_speed_1 = 25
+overhang_speed_2 = 50
+overhang_speed_3 = 80
+

profile_sources/non-prusa-fff/RatRig/print/QUALITY_0.20mm_Nozzle_0.5_VC3.ini

@@ -0,0 +1,4 @@
+[print:QUALITY_0.20mm_Nozzle_0.5_VC3]
+inherits = *common_RatRigOLD*; *0.5nozzle*; *VC3_SPEED*; *0.20mm*
+compatible_printers_condition = printer_notes=~/.*VCore3settings*/ and nozzle_diameter[0]==0.5
+

profile_sources/non-prusa-fff/RatRig/print/QUALITY_0.20mm_Nozzle_0.5_VM.ini

@@ -0,0 +1,9 @@
+[print:QUALITY_0.20mm_Nozzle_0.5_VM]
+inherits = *common_RatRigOLD*; *0.5nozzle*; *VM1_SPEED*; *0.20mm*
+compatible_printers_condition = printer_notes=~/.*VMinionsettings*/ and nozzle_diameter[0]==0.5
+enable_dynamic_overhang_speeds = 1   
+overhang_speed_0 = 15
+overhang_speed_1 = 25
+overhang_speed_2 = 50
+overhang_speed_3 = 80
+

profile_sources/non-prusa-fff/RatRig/print/QUALITY_0.20mm_Nozzle_0.6_VC3.ini

@@ -0,0 +1,4 @@
+[print:QUALITY_0.20mm_Nozzle_0.6_VC3]
+inherits = *common_RatRigOLD*; *0.6nozzle*; *VC3_COREXY_SPEED*; *0.20mm*
+compatible_printers_condition = printer_notes=~/.*VCore3settings*/ and nozzle_diameter[0]==0.6
+

profile_sources/non-prusa-fff/RatRig/print/QUALITY_SPEED_0.25mm_Nozzle_0.4_VC3.ini

@@ -0,0 +1,4 @@
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.4_VC3]
+inherits = *common_RatRigOLD*; *0.4nozzle*; *VC3_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore3settings*/ and nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/RatRig/print/QUALITY_SPEED_0.25mm_Nozzle_0.4_VM.ini

@@ -0,0 +1,9 @@
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.4_VM]
+inherits = *common_RatRigOLD*; *0.4nozzle*; *VM1_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VMinionsettings*/ and nozzle_diameter[0]==0.4
+enable_dynamic_overhang_speeds = 1   
+overhang_speed_0 = 15
+overhang_speed_1 = 25
+overhang_speed_2 = 50
+overhang_speed_3 = 80
+

profile_sources/non-prusa-fff/RatRig/print/QUALITY_SPEED_0.25mm_Nozzle_0.5_VC3.ini

@@ -0,0 +1,4 @@
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.5_VC3]
+inherits = *common_RatRigOLD*; *0.5nozzle*; *VC3_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore3settings*/ and nozzle_diameter[0]==0.5
+

profile_sources/non-prusa-fff/RatRig/print/QUALITY_SPEED_0.25mm_Nozzle_0.5_VM.ini

@@ -0,0 +1,9 @@
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.5_VM]
+inherits = *common_RatRigOLD*; *0.5nozzle*; *VM1_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VMinionsettings*/ and nozzle_diameter[0]==0.5
+enable_dynamic_overhang_speeds = 1   
+overhang_speed_0 = 10
+overhang_speed_1 = 20
+overhang_speed_2 = 30
+overhang_speed_3 = 70
+