Initial Profile Sources

2026-10-01 18:17:21 +00:00 · 2026-03-19 01:54:47 +00:00
parent 7e2e8f9d47
commit 1f7873734a
13374 changed files with 256890 additions and 0 deletions
@@ -0,0 +1,98 @@
+[print:*common_RatRigOLD*]
+allow_empty_layers = 0
+top_solid_layers = 4
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+extra_perimeters = 0
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+bridge_angle = 0
+brim_offset = 0.25
+brim_width = 0
+clip_multipart_objects = 1
+complete_objects = 0
+complete_objects_one_skirt = 0
+complete_objects_sort = object
+dont_support_bridges = 1
+draft_shield = 0
+ensure_vertical_shell_thickness = 1
+exact_last_layer_height = 0
+fill_angle = 45
+fill_density = 25%
+fill_pattern = adaptivecubic
+gap_fill = 1
+gcode_comments = 0
+infill_anchor = 600%
+infill_anchor_max = 5
+infill_every_layers = 1
+infill_extruder = 1
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 18%
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top 
+min_skirt_length = 4
+notes = Generic print settings recomended by RatRig, you may change them.
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{filament_type[0]}_{print_settings_id}_{print_time}.gcode
+perimeter_extruder = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+skirt_distance = 10
+skirt_height = 1
+skirts = 2
+slice_closing_radius = 0.049
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_speed = 100%
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 0
+support_material_buildplate_only = 1
+support_material_contact_distance_bottom = 0.2
+support_material_contact_distance_top = 0.2
+support_material_extruder = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_solid_first_layer = 0
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 65
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 1
+top_fill_pattern = monotonic
+top_solid_infill_speed = 40%
+top_solid_min_thickness = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+elefant_foot_compensation = 0.1
+bridge_flow_ratio = 0.85
+perimeter_generator = classic
+thick_bridges = 1
+top_one_perimeter_type = top
+