Initial Profile Sources

profile_sources/non-prusa-fff/RatRig/printer/V-Core 4.0 400x400 Hybrid 0.4mm nozzle.ini

@@ -0,0 +1,89 @@
+[printer:V-Core 4.0 400x400 Hybrid 0.4mm nozzle]
+inherits= *V-Core 4.0 Base*
+autoemit_temperature_commands = 0
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,400x0,400x400,0x400
+before_layer_gcode = ;[layer_z]
+between_objects_gcode = ;BETWEEN_OBJECTS\nG92 E0
+binary_gcode = 0
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = "PunkFil PETG @RatRig"
+default_print_profile = 0.2 QUALITY
+deretract_speed = 120
+end_gcode = END_PRINT\n
+extra_loading_move = -2
+extruder_colour = #ceff00
+extruder_offset = 0x0
+gcode_flavor = klipper
+high_current_on_filament_swap = 0
+host_type = prusalink
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 10000
+machine_max_acceleration_retracting = 10000
+machine_max_acceleration_travel = 9000,1250
+machine_max_acceleration_x = 10000
+machine_max_acceleration_y = 10000
+machine_max_acceleration_z = 200
+machine_max_feedrate_e = 120
+machine_max_feedrate_x = 400
+machine_max_feedrate_y = 400
+machine_max_feedrate_z = 50
+machine_max_jerk_e = 5
+machine_max_jerk_x = 5
+machine_max_jerk_y = 5
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+max_layer_height = 0.3
+max_print_height = 400
+min_layer_height = 0.06
+multimaterial_purging = 140
+nozzle_diameter = 0.4
+nozzle_high_flow = 0
+parking_pos_retraction = 92
+pause_print_gcode = M601
+prefer_clockwise_movements = 0
+print_host = 
+printer_model = VC4_400_HY
+printer_notes = RR_VC4_400_HY_04N
+printer_settings_id = 
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+remaining_times = 1
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 1
+retract_lift = 0.2
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 120
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]} BED_TEMP=[first_layer_bed_temperature] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}
+template_custom_gcode = 
+thumbnails = 64x64/PNG, 400x300/PNG
+thumbnails_format = PNG
+toolchange_gcode = 
+travel_lift_before_obstacle = 0
+travel_max_lift = 1.5
+travel_ramping_lift = 1
+travel_slope = 1
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
+