Initial Profile Sources

profile_sources/non-prusa-fff/Rigid3D/filament/Generic ABS @Rigid3D.ini

@@ -0,0 +1,10 @@
+[filament:Generic ABS @Rigid3D]
+inherits = *ABS*
+filament_colour = #49B928
+filament_density = 1.04
+first_layer_temperature = 235
+temperature = 235
+first_layer_bed_temperature = 100
+bed_temperature = 100
+filament_max_volumetric_speed = 8
+

profile_sources/non-prusa-fff/Rigid3D/filament/Generic FLEX @Rigid3D.ini

@@ -0,0 +1,10 @@
+[filament:Generic FLEX @Rigid3D]
+inherits = *FLEX*
+filament_colour = #C80000
+filament_density = 1.21
+first_layer_temperature = 225
+temperature = 225
+first_layer_bed_temperature = 70
+bed_temperature = 70
+filament_max_volumetric_speed = 2.5
+

profile_sources/non-prusa-fff/Rigid3D/filament/Generic Nylon @Rigid3D.ini

@@ -0,0 +1,11 @@
+[filament:Generic Nylon @Rigid3D]
+inherits = *NYLON*
+filament_colour = #0AF1CE
+filament_density = 1.12
+first_layer_temperature = 250
+temperature = 250
+first_layer_bed_temperature = 100
+bed_temperature = 100
+filament_max_volumetric_speed = 8
+
+# Common printer preset

profile_sources/non-prusa-fff/Rigid3D/filament/Generic PETG @Rigid3D.ini

@@ -0,0 +1,10 @@
+[filament:Generic PETG @Rigid3D]
+inherits = *PETG*
+filament_colour = #FF8000
+filament_density = 1.27
+first_layer_temperature = 240
+temperature = 240
+first_layer_bed_temperature = 70
+bed_temperature = 70
+filament_max_volumetric_speed = 8
+

profile_sources/non-prusa-fff/Rigid3D/filament/Generic PLA @Rigid3D.ini

@@ -0,0 +1,10 @@
+[filament:Generic PLA @Rigid3D]
+inherits = *PLA*
+bed_temperature = 55
+filament_colour = #FFFF00
+filament_density = 1.24
+filament_max_volumetric_speed = 12
+first_layer_temperature = 215
+temperature = 215
+first_layer_bed_temperature = 60
+

profile_sources/non-prusa-fff/Rigid3D/filament/Rigid3D PLA @Rigid3D.ini

@@ -0,0 +1,10 @@
+[filament:Rigid3D PLA @Rigid3D]
+inherits = *PLA*
+filament_colour = #FFFF00
+filament_density = 1.24
+first_layer_temperature = 210
+temperature = 205
+first_layer_bed_temperature = 60
+bed_temperature = 55
+filament_max_volumetric_speed = 12
+

profile_sources/non-prusa-fff/Rigid3D/filament/_ABS_.ini

@@ -0,0 +1,9 @@
+[filament:*ABS*]
+inherits = *common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
+cooling = 1
+fan_always_on = 0
+filament_type = ABS
+max_fan_speed = 0
+min_fan_speed = 0
+

profile_sources/non-prusa-fff/Rigid3D/filament/_FLEX_.ini

@@ -0,0 +1,11 @@
+[filament:*FLEX*]
+inherits = *common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
+bridge_fan_speed = 100
+cooling = 1
+fan_always_on = 1
+filament_type = FLEX
+full_fan_speed_layer = 4
+max_fan_speed = 100
+min_fan_speed = 100
+

profile_sources/non-prusa-fff/Rigid3D/filament/_NYLON_.ini

@@ -0,0 +1,9 @@
+[filament:*NYLON*]
+inherits = *common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
+cooling = 1
+fan_always_on = 0
+filament_type = NYLON
+max_fan_speed = 0
+min_fan_speed = 0
+

profile_sources/non-prusa-fff/Rigid3D/filament/_PETG_.ini

@@ -0,0 +1,9 @@
+[filament:*PETG*]
+inherits = *common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
+cooling = 1
+fan_always_on = 0
+filament_type = PETG
+max_fan_speed = 50
+min_fan_speed = 30
+

profile_sources/non-prusa-fff/Rigid3D/filament/_PLA_.ini

@@ -0,0 +1,11 @@
+[filament:*PLA*]
+inherits = *common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/
+bridge_fan_speed = 100
+cooling = 1
+fan_always_on = 1
+filament_type = PLA
+full_fan_speed_layer = 4
+max_fan_speed = 100
+min_fan_speed = 100
+

profile_sources/non-prusa-fff/Rigid3D/filament/_common_.ini

@@ -0,0 +1,30 @@
+[filament:*common*]
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_below_layer_time = 60
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_wipe = nil
+min_print_speed = 10
+slowdown_below_layer_time = 10
+start_filament_gcode = "; Filament gcode\n"
+

profile_sources/non-prusa-fff/Rigid3D/metadata.json

@@ -0,0 +1,171 @@
+{
+  "repo": {
+    "id": "non-prusa-fff",
+    "name": "Other FFF",
+    "description": "FFF Printers by other vendors",
+    "visibility": ""
+  },
+  "vendor": "Rigid3D",
+  "version": "2.1.0",
+  "index_name": "Rigid3D.idx",
+  "section_order": [
+    {
+      "type": "vendor",
+      "name": "vendor",
+      "path": "vendor/vendor.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "Zero2",
+      "path": "printer_model/Zero2.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "Zero3",
+      "path": "printer_model/Zero3.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "Mucit",
+      "path": "printer_model/Mucit.ini"
+    },
+    {
+      "type": "printer_model",
+      "name": "Mucit2",
+      "path": "printer_model/Mucit2.ini"
+    },
+    {
+      "type": "print",
+      "name": "*common*",
+      "path": "print/_common_.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.06mm - Ultra @Rigid3D",
+      "path": "print/0.06mm - Ultra @Rigid3D.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.12mm - Super @Rigid3D",
+      "path": "print/0.12mm - Super @Rigid3D.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.16mm - Good @Rigid3D",
+      "path": "print/0.16mm - Good @Rigid3D.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.20mm - Standard @Rigid3D",
+      "path": "print/0.20mm - Standard @Rigid3D.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.24mm - Draft @Rigid3D",
+      "path": "print/0.24mm - Draft @Rigid3D.ini"
+    },
+    {
+      "type": "print",
+      "name": "0.28mm - Low @Rigid3D",
+      "path": "print/0.28mm - Low @Rigid3D.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*common*",
+      "path": "filament/_common_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*PLA*",
+      "path": "filament/_PLA_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*ABS*",
+      "path": "filament/_ABS_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*PETG*",
+      "path": "filament/_PETG_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*FLEX*",
+      "path": "filament/_FLEX_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "*NYLON*",
+      "path": "filament/_NYLON_.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic PLA @Rigid3D",
+      "path": "filament/Generic PLA @Rigid3D.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Rigid3D PLA @Rigid3D",
+      "path": "filament/Rigid3D PLA @Rigid3D.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic ABS @Rigid3D",
+      "path": "filament/Generic ABS @Rigid3D.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic PETG @Rigid3D",
+      "path": "filament/Generic PETG @Rigid3D.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic FLEX @Rigid3D",
+      "path": "filament/Generic FLEX @Rigid3D.ini"
+    },
+    {
+      "type": "filament",
+      "name": "Generic Nylon @Rigid3D",
+      "path": "filament/Generic Nylon @Rigid3D.ini"
+    },
+    {
+      "type": "printer",
+      "name": "*common*",
+      "path": "printer/_common_.ini"
+    },
+    {
+      "type": "printer",
+      "name": "Rigid3D Zero2",
+      "path": "printer/Rigid3D Zero2.ini"
+    },
+    {
+      "type": "printer",
+      "name": "Rigid3D Zero3",
+      "path": "printer/Rigid3D Zero3.ini"
+    },
+    {
+      "type": "printer",
+      "name": "Rigid3D Mucit",
+      "path": "printer/Rigid3D Mucit.ini"
+    },
+    {
+      "type": "printer",
+      "name": "Rigid3D Mucit2",
+      "path": "printer/Rigid3D Mucit2.ini"
+    }
+  ],
+  "asset_paths": [
+    "Mucit2_thumbnail.png",
+    "Mucit_thumbnail.png",
+    "Zero2_thumbnail.png",
+    "Zero3_thumbnail.png",
+    "mucit2_bed.png",
+    "mucit2_bed.stl",
+    "mucit_bed.png",
+    "mucit_bed.stl",
+    "zero2_bed.png",
+    "zero3_bed.png",
+    "zero_bed.stl"
+  ]
+}

profile_sources/non-prusa-fff/Rigid3D/print/0.06mm - Ultra @Rigid3D.ini

@@ -0,0 +1,6 @@
+[print:0.06mm - Ultra @Rigid3D]
+inherits = *common*
+layer_height = 0.06
+bottom_solid_layers = 10
+top_solid_layers = 14
+

profile_sources/non-prusa-fff/Rigid3D/print/0.12mm - Super @Rigid3D.ini

@@ -0,0 +1,6 @@
+[print:0.12mm - Super @Rigid3D]
+inherits = *common*
+layer_height = 0.12
+bottom_solid_layers = 7
+top_solid_layers = 7
+

profile_sources/non-prusa-fff/Rigid3D/print/0.16mm - Good @Rigid3D.ini

@@ -0,0 +1,6 @@
+[print:0.16mm - Good @Rigid3D]
+inherits = *common*
+layer_height = 0.16
+bottom_solid_layers = 5
+top_solid_layers = 5
+

profile_sources/non-prusa-fff/Rigid3D/print/0.20mm - Standard @Rigid3D.ini

@@ -0,0 +1,6 @@
+[print:0.20mm - Standard @Rigid3D]
+inherits = *common*
+layer_height = 0.20
+bottom_solid_layers = 4
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/Rigid3D/print/0.24mm - Draft @Rigid3D.ini

@@ -0,0 +1,6 @@
+[print:0.24mm - Draft @Rigid3D]
+inherits = *common*
+layer_height = 0.24
+bottom_solid_layers = 3
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/Rigid3D/print/0.28mm - Low @Rigid3D.ini

@@ -0,0 +1,6 @@
+[print:0.28mm - Low @Rigid3D]
+inherits = *common*
+layer_height = 0.28
+bottom_solid_layers = 3
+top_solid_layers = 4
+

profile_sources/non-prusa-fff/Rigid3D/print/_common_.ini

@@ -0,0 +1,141 @@
+[print:*common*]
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_min_thickness = 0.8
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_separation = 0
+brim_type = outer_only
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers =
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+draft_shield = disabled
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 0
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 50%
+external_perimeters_first = 1
+extra_perimeters = 1
+extrusion_width = 0
+fill_angle = 45
+fill_density = 10%
+fill_pattern = line
+first_layer_acceleration = 0
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.2
+first_layer_speed = 50%
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 20
+gcode_comments = 0
+gcode_label_objects = 0
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 0
+infill_anchor = 2.5
+infill_anchor_max = 12
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 0
+mmu_segmented_region_max_width = 0
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}.gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 60
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0
+seam_position = random
+single_extruder_multi_material_priming = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 0
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 100%
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_style = organic
+support_material_synchronize_layers = 0
+support_material_threshold = 0
+support_material_with_sheath = 1
+support_material_xy_spacing = 50%
+thick_bridges = 0
+thin_walls = 1
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 100%
+top_solid_min_thickness = 0.8
+travel_speed = 80
+travel_speed_z = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+

profile_sources/non-prusa-fff/Rigid3D/printer/Rigid3D Mucit.ini

@@ -0,0 +1,9 @@
+[printer:Rigid3D Mucit]
+inherits = *common*
+bed_shape = 0x0,150x0,150x150,0x150
+max_print_height = 150
+printer_model = Mucit
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_MUCIT\n
+start_gcode = G21\nG92 E0\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nG28\nM420 S1\nM107\nG90\nM190 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X140.0 Y0.1 Z0.3 F1500.0 E10\nG1 X140 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E20\nG1 Z2.0 F1500.0\nG92 E0\n
+end_gcode = G1 X0 Y140\nM107\nG91\nG0 Z20\nT0\nG1 E-2\nM104 T0 S0\nG90\nG92 E0\nM140 S0\nM84\nM300 S2093 P150\nM300 S2637 P150\nM300 S3135 P150\nM300 S4186 P150\nM300 S3135 P150\nM300 S2637 P150\nM300 S2793 P150\nM300 S2349 P150\nM300 S1975 P150\nM300 S2093 P450\n
+

profile_sources/non-prusa-fff/Rigid3D/printer/Rigid3D Mucit2.ini

@@ -0,0 +1,8 @@
+[printer:Rigid3D Mucit2]
+inherits = *common*
+bed_shape = 0x0,150x0,150x150,0x150
+max_print_height = 150
+printer_model = Mucit2
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_MUCIT2\nPRINTER_HAS_HEATEDBED\n
+start_gcode = G21\nG92 E0\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nG28\nM420 S1\nM107\nG90\nM190 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X140.0 Y0.1 Z0.3 F1500.0 E10\nG1 X140 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E20\nG1 Z2.0 F1500.0\nG92 E0\n
+end_gcode = G92 E0\nT0\nG1 F1800 E-2\nG27 P2\nM107\nM104 T0 S0\nM140 S0\nG90\nG92 E0\nM18\n

profile_sources/non-prusa-fff/Rigid3D/printer/Rigid3D Zero2.ini

@@ -0,0 +1,9 @@
+[printer:Rigid3D Zero2]
+inherits = *common*
+bed_shape = 0x0,200x0,200x200,0x200
+max_print_height = 190
+printer_model = Zero2
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_ZERO2\nPRINTER_HAS_HEATEDBED\n
+start_gcode = G21\nG92 E0\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nG28\nM420 S1\nM107\nG90\nM190 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X190.0 Y0.1 Z0.3 F1500.0 E15\nG1 X190 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E30\nG1 Z2.0 F1500.0\nG92 E0\n
+end_gcode = G1 X0 Y180\nM107\nG91\nG0 Z20\nT0\nG1 E-1\nM104 T0 S0\nG90\nG92 E0\nM140 S0\nM84\nM300 S2093 P150\nM300 S2637 P150\nM300 S3135 P150\nM300 S4186 P150\nM300 S3135 P150\nM300 S2637 P150\nM300 S2793 P150\nM300 S2349 P150\nM300 S1975 P150\nM300 S2093 P450\n
+

profile_sources/non-prusa-fff/Rigid3D/printer/Rigid3D Zero3.ini

@@ -0,0 +1,9 @@
+[printer:Rigid3D Zero3]
+inherits = *common*
+bed_shape = 0x0,200x0,200x200,0x200
+max_print_height = 200
+printer_model = Zero3
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_ZERO3\nPRINTER_HAS_HEATEDBED\n
+start_gcode = G21\nG92 E0\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nG28\nM420 S1\nM107\nG90\nM190 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X190.0 Y0.1 Z0.3 F1500.0 E15\nG1 X190 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E30\nG1 Z2.0 F1500.0\nG92 E0\n
+end_gcode = G92 E0\nT0\nG1 F1800 E-2\nG27 P2\nM107\nM104 T0 S0\nM140 S0\nG90\nG92 E0\nM18\n
+

profile_sources/non-prusa-fff/Rigid3D/printer/_common_.ini

@@ -0,0 +1,59 @@
+[printer:*common*]
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+color_change_gcode = M600
+default_filament_profile = "Rigid3D PLA @Rigid3D"
+default_print_profile = "0.20mm - Standard @Rigid3D"
+deretract_speed = 0
+extruder_offset = 0x0
+gcode_flavor = marlin2
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\n\n
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 1000
+machine_max_acceleration_extruding = 500
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_travel = 1000
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 25
+machine_max_feedrate_x = 120
+machine_max_feedrate_y = 120
+machine_max_feedrate_z = 20
+machine_max_jerk_e = 5
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 0.3
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+max_layer_height = 0.32
+min_layer_height = 0.05
+nozzle_diameter = 0.4
+pause_print_gcode = M0
+printer_settings_id = 
+printer_technology = FFF
+printer_variant = 0.4
+remaining_times = 0
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 1
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 25
+silent_mode = 0
+single_extruder_multi_material = 0
+template_custom_gcode = 
+thumbnails = 
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
+

profile_sources/non-prusa-fff/Rigid3D/printer_model/Mucit.ini

@@ -0,0 +1,10 @@
+[printer_model:Mucit]
+name = Rigid3D Mucit
+variants = 0.4
+technology = FFF
+family = Mucit
+bed_model = mucit_bed.stl
+bed_texture = mucit_bed.png
+default_materials = Generic PLA @Rigid3D; Rigid3D PLA @Rigid3D
+
+thumbnail = Mucit_thumbnail.png

profile_sources/non-prusa-fff/Rigid3D/printer_model/Mucit2.ini

@@ -0,0 +1,14 @@
+[printer_model:Mucit2]
+name = Rigid3D Mucit2
+variants = 0.4
+technology = FFF
+family = Mucit
+bed_model = mucit2_bed.stl
+bed_texture = mucit2_bed.png
+default_materials = Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Rigid3D; Rigid3D PLA @Rigid3D; Generic Nylon @Rigid3D; Generic FLEX @Rigid3D
+
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface.
+
+# Common print preset
+thumbnail = Mucit2_thumbnail.png

profile_sources/non-prusa-fff/Rigid3D/printer_model/Zero2.ini

@@ -0,0 +1,10 @@
+[printer_model:Zero2]
+name = Rigid3D Zero2
+variants = 0.4
+technology = FFF
+family = Zero
+bed_model = zero_bed.stl
+bed_texture = zero2_bed.png
+default_materials = Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Rigid3D; Rigid3D PLA @Rigid3D; Generic Nylon @Rigid3D; Generic FLEX @Rigid3D
+
+thumbnail = Zero2_thumbnail.png

profile_sources/non-prusa-fff/Rigid3D/printer_model/Zero3.ini

@@ -0,0 +1,10 @@
+[printer_model:Zero3]
+name = Rigid3D Zero3
+variants = 0.4
+technology = FFF
+family = Zero
+bed_model = zero_bed.stl
+bed_texture = zero3_bed.png
+default_materials =Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Rigid3D; Rigid3D PLA @Rigid3D; Generic Nylon @Rigid3D; Generic FLEX @Rigid3D
+
+thumbnail = Zero3_thumbnail.png

profile_sources/non-prusa-fff/Rigid3D/vendor.idx

@@ -0,0 +1,10 @@
+min_slic3r_version = 2.9.1-alpha0
+2.1.0 Extruder clearance moved to printer settings.
+min_slic3r_version = 2.8.0-alpha0
+2.0.0 Updated for PS2.8.0.
+min_slic3r_version = 2.7.9
+min_slic3r_version = 2.6.0-alpha5
+1.0.1 General rework. Fix start gcodes.
+min_slic3r_version = 2.6.0-alpha0
+1.0.0 Initial Rigid3D bundle
+

profile_sources/non-prusa-fff/Rigid3D/vendor/vendor.ini

@@ -0,0 +1,15 @@
+[vendor]
+repo_id = non-prusa-fff
+# Vendor name will be shown by the Config Wizard.
+name = Rigid3D
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 2.1.0
+# Where to get the updates from?
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Rigid3D/
+# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+