Initial Profile Sources

profile_sources/non-prusa-fff/Rigid3D/filament/Generic ABS @Rigid3D.ini

@@ -0,0 +1,10 @@
+[filament:Generic ABS @Rigid3D]
+inherits = *ABS*
+filament_colour = #49B928
+filament_density = 1.04
+first_layer_temperature = 235
+temperature = 235
+first_layer_bed_temperature = 100
+bed_temperature = 100
+filament_max_volumetric_speed = 8
+

profile_sources/non-prusa-fff/Rigid3D/filament/Generic FLEX @Rigid3D.ini

@@ -0,0 +1,10 @@
+[filament:Generic FLEX @Rigid3D]
+inherits = *FLEX*
+filament_colour = #C80000
+filament_density = 1.21
+first_layer_temperature = 225
+temperature = 225
+first_layer_bed_temperature = 70
+bed_temperature = 70
+filament_max_volumetric_speed = 2.5
+

profile_sources/non-prusa-fff/Rigid3D/filament/Generic Nylon @Rigid3D.ini

@@ -0,0 +1,11 @@
+[filament:Generic Nylon @Rigid3D]
+inherits = *NYLON*
+filament_colour = #0AF1CE
+filament_density = 1.12
+first_layer_temperature = 250
+temperature = 250
+first_layer_bed_temperature = 100
+bed_temperature = 100
+filament_max_volumetric_speed = 8
+
+# Common printer preset

profile_sources/non-prusa-fff/Rigid3D/filament/Generic PETG @Rigid3D.ini

@@ -0,0 +1,10 @@
+[filament:Generic PETG @Rigid3D]
+inherits = *PETG*
+filament_colour = #FF8000
+filament_density = 1.27
+first_layer_temperature = 240
+temperature = 240
+first_layer_bed_temperature = 70
+bed_temperature = 70
+filament_max_volumetric_speed = 8
+

profile_sources/non-prusa-fff/Rigid3D/filament/Generic PLA @Rigid3D.ini

@@ -0,0 +1,10 @@
+[filament:Generic PLA @Rigid3D]
+inherits = *PLA*
+bed_temperature = 55
+filament_colour = #FFFF00
+filament_density = 1.24
+filament_max_volumetric_speed = 12
+first_layer_temperature = 215
+temperature = 215
+first_layer_bed_temperature = 60
+

profile_sources/non-prusa-fff/Rigid3D/filament/Rigid3D PLA @Rigid3D.ini

@@ -0,0 +1,10 @@
+[filament:Rigid3D PLA @Rigid3D]
+inherits = *PLA*
+filament_colour = #FFFF00
+filament_density = 1.24
+first_layer_temperature = 210
+temperature = 205
+first_layer_bed_temperature = 60
+bed_temperature = 55
+filament_max_volumetric_speed = 12
+

profile_sources/non-prusa-fff/Rigid3D/filament/_ABS_.ini

@@ -0,0 +1,9 @@
+[filament:*ABS*]
+inherits = *common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
+cooling = 1
+fan_always_on = 0
+filament_type = ABS
+max_fan_speed = 0
+min_fan_speed = 0
+

profile_sources/non-prusa-fff/Rigid3D/filament/_FLEX_.ini

@@ -0,0 +1,11 @@
+[filament:*FLEX*]
+inherits = *common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
+bridge_fan_speed = 100
+cooling = 1
+fan_always_on = 1
+filament_type = FLEX
+full_fan_speed_layer = 4
+max_fan_speed = 100
+min_fan_speed = 100
+

profile_sources/non-prusa-fff/Rigid3D/filament/_NYLON_.ini

@@ -0,0 +1,9 @@
+[filament:*NYLON*]
+inherits = *common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
+cooling = 1
+fan_always_on = 0
+filament_type = NYLON
+max_fan_speed = 0
+min_fan_speed = 0
+

profile_sources/non-prusa-fff/Rigid3D/filament/_PETG_.ini

@@ -0,0 +1,9 @@
+[filament:*PETG*]
+inherits = *common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
+cooling = 1
+fan_always_on = 0
+filament_type = PETG
+max_fan_speed = 50
+min_fan_speed = 30
+

profile_sources/non-prusa-fff/Rigid3D/filament/_PLA_.ini

@@ -0,0 +1,11 @@
+[filament:*PLA*]
+inherits = *common*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/
+bridge_fan_speed = 100
+cooling = 1
+fan_always_on = 1
+filament_type = PLA
+full_fan_speed_layer = 4
+max_fan_speed = 100
+min_fan_speed = 100
+

profile_sources/non-prusa-fff/Rigid3D/filament/_common_.ini

@@ -0,0 +1,30 @@
+[filament:*common*]
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_below_layer_time = 60
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_wipe = nil
+min_print_speed = 10
+slowdown_below_layer_time = 10
+start_filament_gcode = "; Filament gcode\n"
+