Initial Profile Sources

profile_sources/non-prusa-fff/Snapmaker/filament/PolyLite Dual PLA @0.2 nozzle.ini

@@ -0,0 +1,4 @@
+[filament:PolyLite Dual PLA @0.2 nozzle]
+inherits = PolyLite PLA @0.2 nozzle
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.2")
+

profile_sources/non-prusa-fff/Snapmaker/filament/PolyLite Dual PLA.ini

@@ -0,0 +1,4 @@
+[filament:PolyLite Dual PLA]
+inherits = *PolyLite PLA @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/PolyLite J1 PLA @0.2 nozzle.ini

@@ -0,0 +1,4 @@
+[filament:PolyLite J1 PLA @0.2 nozzle]
+inherits = PolyLite PLA @0.2 nozzle
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.2")
+

profile_sources/non-prusa-fff/Snapmaker/filament/PolyLite J1 PLA.ini

@@ -0,0 +1,4 @@
+[filament:PolyLite J1 PLA]
+inherits = *PolyLite PLA @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/PolyLite PLA @0.2 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:PolyLite PLA @0.2 nozzle]
+inherits = *PolyLite PLA @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 1.6
+

profile_sources/non-prusa-fff/Snapmaker/filament/PolyLite PLA.ini

@@ -0,0 +1,4 @@
+[filament:PolyLite PLA]
+inherits = *PolyLite PLA @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/PolyTerra Dual PLA @0.2 nozzle.ini

@@ -0,0 +1,4 @@
+[filament:PolyTerra Dual PLA @0.2 nozzle]
+inherits = PolyTerra PLA @0.2 nozzle
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.2")
+

profile_sources/non-prusa-fff/Snapmaker/filament/PolyTerra Dual PLA.ini

@@ -0,0 +1,4 @@
+[filament:PolyTerra Dual PLA]
+inherits = *PolyTerra PLA @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/PolyTerra J1 PLA @0.2 nozzle.ini

@@ -0,0 +1,4 @@
+[filament:PolyTerra J1 PLA @0.2 nozzle]
+inherits = PolyTerra PLA @0.2 nozzle
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.2")
+

profile_sources/non-prusa-fff/Snapmaker/filament/PolyTerra J1 PLA.ini

@@ -0,0 +1,4 @@
+[filament:PolyTerra J1 PLA]
+inherits = *PolyTerra PLA @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/PolyTerra PLA @0.2 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:PolyTerra PLA @0.2 nozzle]
+inherits = *PolyTerra PLA @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 1.4
+

profile_sources/non-prusa-fff/Snapmaker/filament/PolyTerra PLA.ini

@@ -0,0 +1,4 @@
+[filament:PolyTerra PLA]
+inherits = *PolyTerra PLA @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker ABS @0.2 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker ABS @0.2 nozzle]
+inherits = *Snapmaker ABS @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 2
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker ABS.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker ABS]
+inherits = *Snapmaker ABS @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker ASA @0.2 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker ASA @0.2 nozzle]
+inherits = *Snapmaker ASA @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 2.4
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker ASA.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker ASA]
+inherits = *Snapmaker ASA @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual ABS @0.2 nozzle.ini

@@ -0,0 +1,21 @@
+[filament:Snapmaker Dual ABS @0.2 nozzle]
+inherits = *Snapmaker Dual ABS @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 2
+filament_loading_speed_start = 3
+filament_loading_speed = 25
+filament_unloading_speed_start = 3
+filament_unloading_speed = 25
+filament_load_time = 0
+filament_unload_time = 0
+filament_cooling_moves = 0
+filament_cooling_initial_speed = 2.2
+filament_cooling_final_speed = 3.4
+bed_temperature = 90
+first_layer_bed_temperature = 90
+max_fan_speed = 80
+bridge_fan_speed = 80
+extrusion_multiplier = 0.93
+start_filament_gcode = "M900 K0.015 ;override pressure advance value"
+end_filament_gcode = ""
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual ABS @0.8 nozzle.ini

@@ -0,0 +1,6 @@
+[filament:Snapmaker Dual ABS @0.8 nozzle]
+inherits = *Snapmaker Dual ABS @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.8")
+filament_max_volumetric_speed = 16
+min_print_speed = 10
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual ABS Benchy.ini

@@ -0,0 +1,20 @@
+[filament:Snapmaker Dual ABS Benchy]
+inherits = *Snapmaker Dual ABS @base*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4")
+filament_max_volumetric_speed = 31
+filament_wipe = 0
+temperature = 250
+filament_retract_length = 0.5
+filament_retract_speed = 55
+filament_deretract_speed = 55
+filament_retract_lift = 0
+filament_retract_layer_change = 0
+cooling = 0
+min_fan_speed = 35
+max_fan_speed = 50
+bridge_fan_speed = 35
+slowdown_below_layer_time = 0
+fan_below_layer_time = 2
+min_print_speed = 0
+filament_colour = #335BBB
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual ABS.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker Dual ABS]
+inherits = *Snapmaker Dual ABS @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual ASA @0.2 nozzle.ini

@@ -0,0 +1,20 @@
+[filament:Snapmaker Dual ASA @0.2 nozzle]
+inherits = *Snapmaker Dual ASA @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 2.4
+filament_loading_speed_start = 3
+filament_loading_speed = 25
+filament_unloading_speed_start = 3
+filament_unloading_speed = 25
+filament_load_time = 0
+filament_unload_time = 0
+filament_cooling_moves = 0
+filament_cooling_initial_speed = 2.2
+filament_cooling_final_speed = 3.4
+bed_temperature = 90
+first_layer_bed_temperature = 90
+min_fan_speed = 10
+max_fan_speed = 35
+bridge_fan_speed = 80
+end_filament_gcode = ""
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual ASA.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker Dual ASA]
+inherits = *Snapmaker Dual ASA @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PA-CF.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker Dual PA-CF]
+inherits = *Snapmaker Dual PA-CF @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PET.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker Dual PET]
+inherits = *Snapmaker Dual PET @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PETG @0.2 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker Dual PETG @0.2 nozzle]
+inherits = *Snapmaker Dual PETG @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 1.6
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PETG @0.8 nozzle.ini

@@ -0,0 +1,6 @@
+[filament:Snapmaker Dual PETG @0.8 nozzle]
+inherits = *Snapmaker Dual PETG @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.8")
+min_fan_speed = 20
+max_fan_speed = 60
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PETG-CF.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker Dual PETG-CF]
+inherits = *Snapmaker Dual PETG-CF @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PETG.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker Dual PETG]
+inherits = *Snapmaker Dual PETG @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PLA Eco @0.2 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker Dual PLA Eco @0.2 nozzle]
+inherits = *Snapmaker Dual PLA Eco @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 2
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PLA Eco @0.8 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker Dual PLA Eco @0.8 nozzle]
+inherits = *Snapmaker Dual PLA Eco @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.8")
+min_print_speed = 20
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PLA Eco.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker Dual PLA Eco]
+inherits = *Snapmaker Dual PLA Eco @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PLA Matte @0.2 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker Dual PLA Matte @0.2 nozzle]
+inherits = *Snapmaker Dual PLA Matte @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 2
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PLA Matte @0.8 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker Dual PLA Matte @0.8 nozzle]
+inherits = *Snapmaker Dual PLA Matte @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.8")
+min_print_speed = 20
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PLA Matte.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker Dual PLA Matte]
+inherits = *Snapmaker Dual PLA Matte @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PLA Metal @0.2 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker Dual PLA Metal @0.2 nozzle]
+inherits = *Snapmaker Dual PLA Metal @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 2
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PLA Metal.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker Dual PLA Metal]
+inherits = *Snapmaker Dual PLA Metal @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PLA Silk @0.2 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker Dual PLA Silk @0.2 nozzle]
+inherits = *Snapmaker Dual PLA Silk @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 2
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PLA Silk.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker Dual PLA Silk]
+inherits = *Snapmaker Dual PLA Silk @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PLA-CF @0.8 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker Dual PLA-CF @0.8 nozzle]
+inherits = *Snapmaker Dual PLA-CF @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.8")
+filament_max_volumetric_speed = 12.8
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PLA-CF.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker Dual PLA-CF]
+inherits = *Snapmaker Dual PLA-CF @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PLA.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker Dual PLA]
+inherits = *Snapmaker Dual PLA @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.2" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PVA @0.2 nozzle.ini

@@ -0,0 +1,7 @@
+[filament:Snapmaker Dual PVA @0.2 nozzle]
+inherits = *Snapmaker Dual PVA @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 1.4
+temperature = 220
+first_layer_temperature = 220
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual PVA.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker Dual PVA]
+inherits = *Snapmaker Dual PVA @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual TPE.ini

@@ -0,0 +1,14 @@
+[filament:Snapmaker Dual TPE]
+inherits = *Snapmaker Dual TPU @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+filament_density = 1.22
+filament_max_volumetric_speed = 7.2
+filament_notes = "eSUN eLastic TPE-83A\n"
+bed_temperature = 45
+first_layer_bed_temperature = 45
+min_fan_speed = 65
+max_fan_speed = 65
+bridge_fan_speed = 65
+extrusion_multiplier = 1.1
+filament_colour = #383737
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual TPU High-Flow.ini

@@ -0,0 +1,10 @@
+[filament:Snapmaker Dual TPU High-Flow]
+inherits = *Snapmaker Dual TPU @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+filament_max_volumetric_speed = 7.6
+filament_notes = "!! It needs to be dried before use.\nSnapmaker TPU 95A High-Flow\n"
+filament_retract_length = 0.8
+filament_retract_speed = nil
+filament_deretract_speed = nil
+extrusion_multiplier = 0.983
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker Dual TPU.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker Dual TPU]
+inherits = *Snapmaker Dual TPU @base*
+compatible_printers_condition = (printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 ABS @0.2 nozzle.ini

@@ -0,0 +1,13 @@
+[filament:Snapmaker J1 ABS @0.2 nozzle]
+inherits = *Snapmaker J1 ABS @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 2
+bed_temperature = 90
+first_layer_bed_temperature = 90
+min_fan_speed = 15
+max_fan_speed = 80
+bridge_fan_speed = 80
+extrusion_multiplier = 0.93
+start_filament_gcode = "M900 K0.015 ;override pressure advance value"
+end_filament_gcode = ""
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 ABS @0.8 nozzle.ini

@@ -0,0 +1,6 @@
+[filament:Snapmaker J1 ABS @0.8 nozzle]
+inherits = *Snapmaker J1 ABS @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8")
+filament_max_volumetric_speed = 16
+min_print_speed = 10
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 ABS Benchy.ini

@@ -0,0 +1,29 @@
+[filament:Snapmaker J1 ABS Benchy]
+inherits = *Snapmaker J1 ABS @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4")
+filament_max_volumetric_speed = 31
+filament_wipe = 0
+filament_loading_speed_start = 35
+filament_loading_speed = 35
+filament_unloading_speed_start = 35
+filament_unloading_speed = 35
+filament_load_time = 2
+filament_unload_time = 2
+filament_cooling_moves = 2
+filament_cooling_initial_speed = 35
+filament_cooling_final_speed = 60
+temperature = 250
+filament_retract_length = 0.5
+filament_retract_speed = 55
+filament_deretract_speed = 55
+filament_retract_lift = 0
+filament_retract_layer_change = 0
+cooling = 0
+min_fan_speed = 65
+max_fan_speed = 80
+bridge_fan_speed = 35
+slowdown_below_layer_time = 0
+fan_below_layer_time = 2
+min_print_speed = 0
+filament_colour = #335BBB
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 ABS.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker J1 ABS]
+inherits = *Snapmaker J1 ABS @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 ASA @0.2 nozzle.ini

@@ -0,0 +1,10 @@
+[filament:Snapmaker J1 ASA @0.2 nozzle]
+inherits = *Snapmaker J1 ASA @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 2.4
+bed_temperature = 90
+first_layer_bed_temperature = 90
+min_fan_speed = 10
+max_fan_speed = 35
+bridge_fan_speed = 80
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 ASA.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker J1 ASA]
+inherits = *Snapmaker J1 ASA @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PA-CF.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker J1 PA-CF]
+inherits = *Snapmaker J1 PA-CF @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PET.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker J1 PET]
+inherits = *Snapmaker J1 PET @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PETG @0.2 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker J1 PETG @0.2 nozzle]
+inherits = *Snapmaker J1 PETG @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 1.6
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PETG @0.8 nozzle.ini

@@ -0,0 +1,6 @@
+[filament:Snapmaker J1 PETG @0.8 nozzle]
+inherits = *Snapmaker J1 PETG @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8")
+min_fan_speed = 20
+max_fan_speed = 60
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PETG-CF.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker J1 PETG-CF]
+inherits = *Snapmaker J1 PETG-CF @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PETG.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker J1 PETG]
+inherits = *Snapmaker J1 PETG @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PLA Eco @0.2 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker J1 PLA Eco @0.2 nozzle]
+inherits = *Snapmaker J1 PLA Eco @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 2
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PLA Eco @0.8 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker J1 PLA Eco @0.8 nozzle]
+inherits = *Snapmaker J1 PLA Eco @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8")
+min_print_speed = 20
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PLA Eco.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker J1 PLA Eco]
+inherits = *Snapmaker J1 PLA Eco @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PLA Matte @0.2 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker J1 PLA Matte @0.2 nozzle]
+inherits = *Snapmaker J1 PLA Matte @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 2
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PLA Matte @0.8 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker J1 PLA Matte @0.8 nozzle]
+inherits = *Snapmaker J1 PLA Matte @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8")
+min_print_speed = 20
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PLA Matte.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker J1 PLA Matte]
+inherits = *Snapmaker J1 PLA Matte @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PLA Metal @0.2 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker J1 PLA Metal @0.2 nozzle]
+inherits = *Snapmaker J1 PLA Metal @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 2
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PLA Metal.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker J1 PLA Metal]
+inherits = *Snapmaker J1 PLA Metal @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PLA Silk @0.2 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker J1 PLA Silk @0.2 nozzle]
+inherits = *Snapmaker J1 PLA Silk @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 2
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PLA Silk.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker J1 PLA Silk]
+inherits = *Snapmaker J1 PLA Silk @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PLA-CF @0.8 nozzle.ini

@@ -0,0 +1,5 @@
+[filament:Snapmaker J1 PLA-CF @0.8 nozzle]
+inherits = *Snapmaker J1 PLA-CF @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8")
+filament_max_volumetric_speed = 12.8
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PLA-CF.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker J1 PLA-CF]
+inherits = *Snapmaker J1 PLA-CF @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PLA.ini

@@ -0,0 +1,4 @@
+[filament:Snapmaker J1 PLA]
+inherits = *Snapmaker J1 PLA @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.2" or nozzle_diameter[0]=="0.4" or nozzle_diameter[0]=="0.6" or nozzle_diameter[0]=="0.8")
+

profile_sources/non-prusa-fff/Snapmaker/filament/Snapmaker J1 PVA @0.2 nozzle.ini

@@ -0,0 +1,7 @@
+[filament:Snapmaker J1 PVA @0.2 nozzle]
+inherits = *Snapmaker J1 PVA @base*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.2")
+filament_max_volumetric_speed = 1.2
+temperature = 220
+first_layer_temperature = 220
+