Initial Profile Sources

profile_sources/non-prusa-fff/Snapmaker/print/0.06 Standard @Snapmaker (0.2 nozzle).ini

@@ -0,0 +1,31 @@
+[print:0.06 Standard @Snapmaker (0.2 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.2")
+layer_height = 0.06
+ironing_speed = 30
+travel_speed = 110
+first_layer_height = 0.1
+perimeters = 4
+top_solid_layers = 7
+bottom_solid_layers = 5
+extrusion_width = 0.22
+first_layer_extrusion_width = 0.25
+perimeter_extrusion_width = 0.22
+external_perimeter_extrusion_width = 0.22
+top_infill_extrusion_width = 0.22
+infill_extrusion_width = 0.22
+solid_infill_extrusion_width = 0.22
+support_material_extrusion_width = 0.22
+bridge_flow_ratio = 1
+first_layer_speed = 40
+external_perimeter_speed = 100
+perimeter_speed = 120
+solid_infill_speed = 120
+gap_fill_speed = 85
+support_material_speed = 100
+support_material_interface_speed = 40
+overhang_speed_3 = 60
+overhang_speed_2 = 30
+overhang_speed_1 = 10
+overhang_speed_0 = 10
+

profile_sources/non-prusa-fff/Snapmaker/print/0.06 Standard @Snapmaker Artisan (0.2 nozzle).ini

@@ -0,0 +1,20 @@
+[print:0.06 Standard @Snapmaker Artisan (0.2 nozzle)]
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.2")
+layer_height = 0.06
+initial_layer_infill_speed = 70
+first_layer_height = 0.1
+perimeters = 4
+top_solid_layers = 5
+bottom_solid_layers = 4
+extrusion_width = 0.22
+first_layer_extrusion_width = 0.25
+perimeter_extrusion_width = 0.22
+external_perimeter_extrusion_width = 0.22
+top_infill_extrusion_width = 0.22
+infill_extrusion_width = 0.22
+solid_infill_extrusion_width = 0.22
+support_material_extrusion_width = 0.22
+bridge_flow_ratio = 1
+first_layer_speed = 40
+perimeter_speed = 150
+

profile_sources/non-prusa-fff/Snapmaker/print/0.06 Standard @Snapmaker J1 (0.2 nozzle).ini

@@ -0,0 +1,20 @@
+[print:0.06 Standard @Snapmaker J1 (0.2 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.2")
+layer_height = 0.06
+initial_layer_infill_speed = 80
+first_layer_height = 0.1
+perimeters = 4
+top_solid_layers = 5
+bottom_solid_layers = 4
+extrusion_width = 0.22
+first_layer_extrusion_width = 0.25
+perimeter_extrusion_width = 0.22
+external_perimeter_extrusion_width = 0.22
+top_infill_extrusion_width = 0.22
+infill_extrusion_width = 0.22
+solid_infill_extrusion_width = 0.22
+support_material_extrusion_width = 0.22
+bridge_flow_ratio = 1
+perimeter_speed = 145
+

profile_sources/non-prusa-fff/Snapmaker/print/0.08 Extra Fine @Snapmaker (0.4 nozzle).ini

@@ -0,0 +1,28 @@
+[print:0.08 Extra Fine @Snapmaker (0.4 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.4")
+elefant_foot_compensation = 0.15
+layer_height = 0.08
+initial_layer_infill_speed = 65
+ironing_speed = 30
+travel_speed = 110
+first_layer_height = 0.1
+top_solid_layers = 9
+bottom_solid_layers = 7
+ironing_flowrate = 8%
+bridge_flow_ratio = 1
+first_layer_speed = 50
+external_perimeter_speed = 70
+perimeter_speed = 120
+infill_speed = 90
+solid_infill_speed = 120
+top_solid_infill_speed = 70
+gap_fill_speed = 85
+support_material_speed = 100
+support_material_interface_speed = 50
+overhang_speed_3 = 55
+overhang_speed_2 = 30
+overhang_speed_1 = 10
+overhang_speed_0 = 10
+support_material_threshold = 15
+

profile_sources/non-prusa-fff/Snapmaker/print/0.08 Extra Fine @Snapmaker Artisan (0.4 nozzle).ini

@@ -0,0 +1,15 @@
+[print:0.08 Extra Fine @Snapmaker Artisan (0.4 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4")
+elefant_foot_compensation = 0.15
+layer_height = 0.08
+initial_layer_infill_speed = 80
+first_layer_height = 0.1
+top_solid_layers = 5
+bottom_solid_layers = 4
+ironing_flowrate = 8%
+bridge_flow_ratio = 1
+perimeter_speed = 145
+solid_infill_speed = 150
+support_material_threshold = 15
+

profile_sources/non-prusa-fff/Snapmaker/print/0.08 Extra Fine @Snapmaker J1 (0.4 nozzle).ini

@@ -0,0 +1,15 @@
+[print:0.08 Extra Fine @Snapmaker J1 (0.4 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4")
+elefant_foot_compensation = 0.15
+layer_height = 0.08
+initial_layer_infill_speed = 80
+first_layer_height = 0.1
+top_solid_layers = 5
+bottom_solid_layers = 4
+ironing_flowrate = 8%
+bridge_flow_ratio = 1
+perimeter_speed = 145
+solid_infill_speed = 150
+support_material_threshold = 15
+

profile_sources/non-prusa-fff/Snapmaker/print/0.10 Standard @Snapmaker (0.2 nozzle).ini

@@ -0,0 +1,34 @@
+[print:0.10 Standard @Snapmaker (0.2 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.2")
+layer_height = 0.1
+initial_layer_infill_speed = 70
+ironing_speed = 30
+travel_speed = 110
+first_layer_height = 0.1
+perimeters = 4
+top_solid_layers = 7
+bottom_solid_layers = 5
+extrusion_width = 0.22
+first_layer_extrusion_width = 0.25
+perimeter_extrusion_width = 0.22
+external_perimeter_extrusion_width = 0.22
+top_infill_extrusion_width = 0.22
+infill_extrusion_width = 0.22
+solid_infill_extrusion_width = 0.22
+support_material_extrusion_width = 0.22
+bridge_flow_ratio = 1
+first_layer_speed = 40
+external_perimeter_speed = 100
+perimeter_speed = 120
+infill_speed = 100
+solid_infill_speed = 120
+top_solid_infill_speed = 100
+gap_fill_speed = 85
+support_material_speed = 100
+support_material_interface_speed = 40
+overhang_speed_3 = 60
+overhang_speed_2 = 30
+overhang_speed_1 = 10
+overhang_speed_0 = 10
+

profile_sources/non-prusa-fff/Snapmaker/print/0.10 Standard @Snapmaker Artisan (0.2 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.10 Standard @Snapmaker Artisan (0.2 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.2")
+layer_height = 0.1
+first_layer_height = 0.1
+perimeters = 4
+top_solid_layers = 7
+bottom_solid_layers = 5
+extrusion_width = 0.22
+first_layer_extrusion_width = 0.25
+perimeter_extrusion_width = 0.22
+external_perimeter_extrusion_width = 0.22
+top_infill_extrusion_width = 0.22
+infill_extrusion_width = 0.22
+solid_infill_extrusion_width = 0.22
+support_material_extrusion_width = 0.22
+bridge_flow_ratio = 1
+

profile_sources/non-prusa-fff/Snapmaker/print/0.10 Standard @Snapmaker J1 (0.2 nozzle).ini

@@ -0,0 +1,20 @@
+[print:0.10 Standard @Snapmaker J1 (0.2 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.2")
+layer_height = 0.1
+initial_layer_infill_speed = 80
+first_layer_height = 0.1
+perimeters = 4
+top_solid_layers = 7
+bottom_solid_layers = 5
+extrusion_width = 0.22
+first_layer_extrusion_width = 0.25
+perimeter_extrusion_width = 0.22
+external_perimeter_extrusion_width = 0.22
+top_infill_extrusion_width = 0.22
+infill_extrusion_width = 0.22
+solid_infill_extrusion_width = 0.22
+support_material_extrusion_width = 0.22
+bridge_flow_ratio = 1
+perimeter_speed = 145
+

profile_sources/non-prusa-fff/Snapmaker/print/0.12 Fine @Snapmaker (0.4 nozzle).ini

@@ -0,0 +1,27 @@
+[print:0.12 Fine @Snapmaker (0.4 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.4")
+layer_height = 0.12
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 65
+ironing_speed = 30
+first_layer_height = 0.2
+top_solid_layers = 5
+top_solid_min_thickness = 0.6
+bottom_solid_layers = 5
+bridge_flow_ratio = 1
+first_layer_speed = 50
+external_perimeter_speed = 75
+perimeter_speed = 120
+infill_speed = 90
+solid_infill_speed = 120
+top_solid_infill_speed = 70
+gap_fill_speed = 85
+support_material_speed = 100
+support_material_interface_speed = 50
+overhang_speed_3 = 55
+overhang_speed_2 = 30
+overhang_speed_1 = 10
+overhang_speed_0 = 10
+support_material_threshold = 20
+

profile_sources/non-prusa-fff/Snapmaker/print/0.12 Fine @Snapmaker Artisan (0.4 nozzle).ini

@@ -0,0 +1,14 @@
+[print:0.12 Fine @Snapmaker Artisan (0.4 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4")
+layer_height = 0.12
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 80
+top_solid_layers = 5
+top_solid_min_thickness = 0.6
+bottom_solid_layers = 5
+bridge_flow_ratio = 1
+perimeter_speed = 145
+solid_infill_speed = 150
+support_material_threshold = 20
+

profile_sources/non-prusa-fff/Snapmaker/print/0.12 Fine @Snapmaker J1 (0.4 nozzle).ini

@@ -0,0 +1,14 @@
+[print:0.12 Fine @Snapmaker J1 (0.4 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4")
+layer_height = 0.12
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 80
+top_solid_layers = 5
+top_solid_min_thickness = 0.6
+bottom_solid_layers = 5
+bridge_flow_ratio = 1
+perimeter_speed = 145
+solid_infill_speed = 150
+support_material_threshold = 20
+

profile_sources/non-prusa-fff/Snapmaker/print/0.14 Standard @Snapmaker (0.2 nozzle).ini

@@ -0,0 +1,33 @@
+[print:0.14 Standard @Snapmaker (0.2 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.2")
+layer_height = 0.14
+initial_layer_infill_speed = 70
+ironing_speed = 30
+first_layer_height = 0.2
+perimeters = 4
+top_solid_layers = 7
+bottom_solid_layers = 5
+extrusion_width = 0.22
+first_layer_extrusion_width = 0.25
+perimeter_extrusion_width = 0.22
+external_perimeter_extrusion_width = 0.22
+top_infill_extrusion_width = 0.22
+infill_extrusion_width = 0.22
+solid_infill_extrusion_width = 0.22
+support_material_extrusion_width = 0.22
+bridge_flow_ratio = 1
+first_layer_speed = 40
+external_perimeter_speed = 100
+perimeter_speed = 120
+infill_speed = 100
+solid_infill_speed = 120
+top_solid_infill_speed = 100
+gap_fill_speed = 85
+support_material_speed = 100
+support_material_interface_speed = 40
+overhang_speed_3 = 60
+overhang_speed_2 = 30
+overhang_speed_1 = 10
+overhang_speed_0 = 10
+

profile_sources/non-prusa-fff/Snapmaker/print/0.14 Standard @Snapmaker Artisan (0.2 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.14 Standard @Snapmaker Artisan (0.2 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.2")
+layer_height = 0.14
+initial_layer_infill_speed = 80
+perimeters = 4
+top_solid_layers = 5
+bottom_solid_layers = 4
+extrusion_width = 0.22
+first_layer_extrusion_width = 0.25
+perimeter_extrusion_width = 0.22
+external_perimeter_extrusion_width = 0.22
+top_infill_extrusion_width = 0.22
+infill_extrusion_width = 0.22
+solid_infill_extrusion_width = 0.22
+support_material_extrusion_width = 0.22
+bridge_flow_ratio = 1
+

profile_sources/non-prusa-fff/Snapmaker/print/0.14 Standard @Snapmaker J1 (0.2 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.14 Standard @Snapmaker J1 (0.2 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.2")
+layer_height = 0.14
+initial_layer_infill_speed = 80
+perimeters = 4
+top_solid_layers = 5
+bottom_solid_layers = 4
+extrusion_width = 0.22
+first_layer_extrusion_width = 0.25
+perimeter_extrusion_width = 0.22
+external_perimeter_extrusion_width = 0.22
+top_infill_extrusion_width = 0.22
+infill_extrusion_width = 0.22
+solid_infill_extrusion_width = 0.22
+support_material_extrusion_width = 0.22
+bridge_flow_ratio = 1
+

profile_sources/non-prusa-fff/Snapmaker/print/0.16 Optimal @Snapmaker (0.4 nozzle).ini

@@ -0,0 +1,26 @@
+[print:0.16 Optimal @Snapmaker (0.4 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.4")
+layer_height = 0.16
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 65
+infill_wall_overlap = 20%
+ironing_speed = 30
+first_layer_height = 0.2
+top_solid_layers = 4
+top_solid_min_thickness = 0.6
+bottom_solid_layers = 4
+bridge_flow_ratio = 1
+first_layer_speed = 50
+external_perimeter_speed = 80
+perimeter_speed = 100
+infill_speed = 95
+top_solid_infill_speed = 70
+gap_fill_speed = 85
+support_material_speed = 100
+overhang_speed_3 = 55
+overhang_speed_2 = 30
+overhang_speed_1 = 10
+overhang_speed_0 = 10
+support_material_threshold = 25
+

profile_sources/non-prusa-fff/Snapmaker/print/0.16 Optimal @Snapmaker Artisan (0.4 nozzle).ini

@@ -0,0 +1,13 @@
+[print:0.16 Optimal @Snapmaker Artisan (0.4 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4")
+layer_height = 0.16
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 80
+top_solid_layers = 5
+top_solid_min_thickness = 0.6
+bottom_solid_layers = 4
+bridge_flow_ratio = 1
+perimeter_speed = 145
+support_material_threshold = 25
+

profile_sources/non-prusa-fff/Snapmaker/print/0.16 Optimal @Snapmaker J1 (0.4 nozzle).ini

@@ -0,0 +1,13 @@
+[print:0.16 Optimal @Snapmaker J1 (0.4 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4")
+layer_height = 0.16
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 80
+top_solid_layers = 5
+top_solid_min_thickness = 0.6
+bottom_solid_layers = 4
+bridge_flow_ratio = 1
+perimeter_speed = 145
+support_material_threshold = 25
+

profile_sources/non-prusa-fff/Snapmaker/print/0.18 Standard @Snapmaker (0.6 nozzle).ini

@@ -0,0 +1,32 @@
+[print:0.18 Standard @Snapmaker (0.6 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.18
+initial_layer_infill_speed = 55
+ironing_speed = 30
+first_layer_height = 0.2
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+perimeter_extrusion_width = 0.62
+external_perimeter_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+infill_extrusion_width = 0.62
+solid_infill_extrusion_width = 0.62
+support_material_extrusion_width = 0.62
+bridge_flow_ratio = 1
+first_layer_speed = 35
+external_perimeter_speed = 90
+perimeter_speed = 90
+infill_speed = 100
+solid_infill_speed = 100
+top_solid_infill_speed = 100
+gap_fill_speed = 50
+support_material_speed = 100
+support_material_interface_speed = 35
+overhang_speed_3 = 0
+overhang_speed_2 = 50
+overhang_speed_1 = 15
+overhang_speed_0 = 10
+

profile_sources/non-prusa-fff/Snapmaker/print/0.18 Standard @Snapmaker Artisan (0.6 nozzle).ini

@@ -0,0 +1,15 @@
+[print:0.18 Standard @Snapmaker Artisan (0.6 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.18
+perimeters = 2
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+perimeter_extrusion_width = 0.62
+external_perimeter_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+infill_extrusion_width = 0.62
+solid_infill_extrusion_width = 0.62
+support_material_extrusion_width = 0.62
+bridge_flow_ratio = 1
+

profile_sources/non-prusa-fff/Snapmaker/print/0.18 Standard @Snapmaker J1 (0.6 nozzle).ini

@@ -0,0 +1,17 @@
+[print:0.18 Standard @Snapmaker J1 (0.6 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.18
+perimeters = 2
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+perimeter_extrusion_width = 0.62
+external_perimeter_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+infill_extrusion_width = 0.62
+solid_infill_extrusion_width = 0.62
+support_material_extrusion_width = 0.62
+bridge_flow_ratio = 1
+perimeter_speed = 145
+solid_infill_speed = 150
+

profile_sources/non-prusa-fff/Snapmaker/print/0.20 Standard @Snapmaker (0.4 nozzle).ini

@@ -0,0 +1,22 @@
+[print:0.20 Standard @Snapmaker (0.4 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.4")
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 60
+ironing_speed = 30
+top_solid_layers = 4
+top_solid_min_thickness = 0.8
+first_layer_speed = 50
+external_perimeter_speed = 70
+perimeter_speed = 90
+infill_speed = 95
+solid_infill_speed = 100
+top_solid_infill_speed = 70
+gap_fill_speed = 85
+support_material_speed = 100
+enable_dynamic_overhang_speeds = 1
+overhang_speed_3 = 40
+overhang_speed_2 = 20
+overhang_speed_1 = 10
+overhang_speed_0 = 10
+

profile_sources/non-prusa-fff/Snapmaker/print/0.20 Standard @Snapmaker Artisan (0.4 nozzle).ini

@@ -0,0 +1,5 @@
+[print:0.20 Standard @Snapmaker Artisan (0.4 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4")
+elefant_foot_compensation = 0.15
+

profile_sources/non-prusa-fff/Snapmaker/print/0.20 Standard @Snapmaker J1 (0.4 nozzle).ini

@@ -0,0 +1,5 @@
+[print:0.20 Standard @Snapmaker J1 (0.4 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4")
+elefant_foot_compensation = 0.15
+

profile_sources/non-prusa-fff/Snapmaker/print/0.20 Strength @Snapmaker (0.4 nozzle).ini

@@ -0,0 +1,25 @@
+[print:0.20 Strength @Snapmaker (0.4 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.4")
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 65
+infill_wall_overlap = 25%
+ironing_speed = 30
+perimeters = 6
+top_solid_layers = 4
+top_solid_min_thickness = 0.8
+fill_density = 25%
+first_layer_speed = 50
+external_perimeter_speed = 90
+perimeter_speed = 100
+infill_speed = 95
+solid_infill_speed = 100
+top_solid_infill_speed = 70
+gap_fill_speed = 85
+support_material_speed = 100
+support_material_interface_speed = 50
+overhang_speed_3 = 55
+overhang_speed_2 = 30
+overhang_speed_1 = 10
+overhang_speed_0 = 10
+

profile_sources/non-prusa-fff/Snapmaker/print/0.20 Strength @Snapmaker Artisan (0.4 nozzle).ini

@@ -0,0 +1,8 @@
+[print:0.20 Strength @Snapmaker Artisan (0.4 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4")
+elefant_foot_compensation = 0.15
+perimeters = 6
+bottom_solid_layers = 4
+fill_density = 25%
+

profile_sources/non-prusa-fff/Snapmaker/print/0.20 Strength @Snapmaker J1 (0.4 nozzle).ini

@@ -0,0 +1,8 @@
+[print:0.20 Strength @Snapmaker J1 (0.4 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4")
+elefant_foot_compensation = 0.15
+perimeters = 6
+bottom_solid_layers = 4
+fill_density = 25%
+

profile_sources/non-prusa-fff/Snapmaker/print/0.24 Draft @Snapmaker (0.4 nozzle).ini

@@ -0,0 +1,25 @@
+[print:0.24 Draft @Snapmaker (0.4 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.4")
+layer_height = 0.24
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 65
+ironing_speed = 30
+top_solid_layers = 3
+top_solid_min_thickness = 0.6
+top_infill_extrusion_width = 0.45
+first_layer_speed = 50
+external_perimeter_speed = 90
+perimeter_speed = 100
+infill_speed = 100
+solid_infill_speed = 100
+top_solid_infill_speed = 70
+gap_fill_speed = 85
+support_material_speed = 100
+support_material_interface_speed = 50
+overhang_speed_3 = 55
+overhang_speed_2 = 30
+overhang_speed_1 = 10
+overhang_speed_0 = 10
+support_material_threshold = 35
+

profile_sources/non-prusa-fff/Snapmaker/print/0.24 Draft @Snapmaker Artisan (0.4 nozzle).ini

@@ -0,0 +1,11 @@
+[print:0.24 Draft @Snapmaker Artisan (0.4 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4")
+layer_height = 0.24
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 65
+top_solid_layers = 3
+top_solid_min_thickness = 0.6
+top_infill_extrusion_width = 0.45
+support_material_threshold = 35
+

profile_sources/non-prusa-fff/Snapmaker/print/0.24 Draft @Snapmaker J1 (0.4 nozzle).ini

@@ -0,0 +1,11 @@
+[print:0.24 Draft @Snapmaker J1 (0.4 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4")
+layer_height = 0.24
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 65
+top_solid_layers = 3
+top_solid_min_thickness = 0.6
+top_infill_extrusion_width = 0.45
+support_material_threshold = 35
+

profile_sources/non-prusa-fff/Snapmaker/print/0.24 Standard @Snapmaker (0.6 nozzle).ini

@@ -0,0 +1,30 @@
+[print:0.24 Standard @Snapmaker (0.6 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.24
+initial_layer_infill_speed = 55
+ironing_speed = 30
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+perimeter_extrusion_width = 0.62
+external_perimeter_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+infill_extrusion_width = 0.62
+solid_infill_extrusion_width = 0.62
+support_material_extrusion_width = 0.62
+first_layer_speed = 35
+external_perimeter_speed = 90
+perimeter_speed = 85
+infill_speed = 100
+solid_infill_speed = 100
+top_solid_infill_speed = 100
+gap_fill_speed = 50
+support_material_speed = 100
+support_material_interface_speed = 35
+overhang_speed_3 = 0
+overhang_speed_2 = 50
+overhang_speed_1 = 15
+overhang_speed_0 = 10
+

profile_sources/non-prusa-fff/Snapmaker/print/0.24 Standard @Snapmaker (0.8 nozzle).ini

@@ -0,0 +1,31 @@
+[print:0.24 Standard @Snapmaker (0.8 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.8")
+layer_height = 0.24
+initial_layer_infill_speed = 55
+ironing_speed = 30
+first_layer_height = 0.3
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 35
+external_perimeter_speed = 90
+perimeter_speed = 85
+infill_speed = 100
+solid_infill_speed = 100
+top_solid_infill_speed = 100
+gap_fill_speed = 50
+support_material_speed = 100
+support_material_interface_speed = 35
+overhang_speed_3 = 0
+overhang_speed_2 = 50
+overhang_speed_1 = 25
+overhang_speed_0 = 5
+

profile_sources/non-prusa-fff/Snapmaker/print/0.24 Standard @Snapmaker Artisan (0.6 nozzle).ini

@@ -0,0 +1,15 @@
+[print:0.24 Standard @Snapmaker Artisan (0.6 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.24
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+perimeter_extrusion_width = 0.62
+external_perimeter_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+infill_extrusion_width = 0.62
+solid_infill_extrusion_width = 0.62
+support_material_extrusion_width = 0.62
+

profile_sources/non-prusa-fff/Snapmaker/print/0.24 Standard @Snapmaker Artisan (0.8 nozzle).ini

@@ -0,0 +1,16 @@
+[print:0.24 Standard @Snapmaker Artisan (0.8 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.8")
+layer_height = 0.24
+first_layer_height = 0.3
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+

profile_sources/non-prusa-fff/Snapmaker/print/0.24 Standard @Snapmaker J1 (0.6 nozzle).ini

@@ -0,0 +1,15 @@
+[print:0.24 Standard @Snapmaker J1 (0.6 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.24
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+perimeter_extrusion_width = 0.62
+external_perimeter_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+infill_extrusion_width = 0.62
+solid_infill_extrusion_width = 0.62
+support_material_extrusion_width = 0.62
+

profile_sources/non-prusa-fff/Snapmaker/print/0.24 Standard @Snapmaker J1 (0.8 nozzle).ini

@@ -0,0 +1,16 @@
+[print:0.24 Standard @Snapmaker J1 (0.8 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8")
+layer_height = 0.24
+first_layer_height = 0.3
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+

profile_sources/non-prusa-fff/Snapmaker/print/0.25 Benchy @Snapmaker Artisan (0.4 nozzle).ini

@@ -0,0 +1,52 @@
+[print:0.25 Benchy @Snapmaker Artisan (0.4 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4")
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 180
+ironing_speed = 30
+layer_height = 0.25
+seam_position = nearest
+minimum_sparse_infill_area = 0
+infill_combination = 1
+infill_direction = 90
+gap_fill_target = nowhere
+initial_layer_travel_speed = 100%
+bridge_acceleration = 3000
+bridge_speed = 100
+default_acceleration = 3000
+small_perimeter_speed = 200
+first_layer_height = 0.25
+perimeters = 2
+top_solid_layers = 3
+top_solid_min_thickness = 0.5
+bottom_solid_layers = 2
+avoid_crossing_perimeters = 0
+overhangs = 0
+perimeter_generator = classic
+fill_density = 10%
+fill_pattern = alignedrectilinear
+extrusion_width = 0.4
+perimeter_extrusion_width = 0.5
+external_perimeter_extrusion_width = 0.5
+top_infill_extrusion_width = 0.5
+infill_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+first_layer_speed = 100
+external_perimeter_speed = 180
+perimeter_speed = 200
+infill_speed = 200
+solid_infill_speed = 200
+top_solid_infill_speed = 180
+gap_fill_speed = 200
+enable_dynamic_overhang_speeds = 0
+overhang_speed_3 = 180
+overhang_speed_2 = 20
+overhang_speed_1 = 10
+external_perimeter_acceleration = 1600
+perimeter_acceleration = 3000
+infill_acceleration = 3000
+solid_infill_acceleration = 3000
+first_layer_acceleration = 1600
+top_solid_infill_acceleration = 3000
+output_filename_format = ArtisanBenchy_{print_time}.gcode
+

profile_sources/non-prusa-fff/Snapmaker/print/0.25 Benchy @Snapmaker J1 (0.4 nozzle).ini

@@ -0,0 +1,52 @@
+[print:0.25 Benchy @Snapmaker J1 (0.4 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4")
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 200
+ironing_speed = 30
+layer_height = 0.25
+seam_position = nearest
+minimum_sparse_infill_area = 0
+infill_combination = 1
+infill_direction = 90
+gap_fill_target = nowhere
+initial_layer_travel_speed = 100%
+bridge_acceleration = 3000
+bridge_speed = 180
+default_acceleration = 15000
+small_perimeter_speed = 200
+travel_acceleration = 28000
+first_layer_height = 0.25
+perimeters = 2
+top_solid_layers = 3
+top_solid_min_thickness = 0.5
+bottom_solid_layers = 2
+avoid_crossing_perimeters = 0
+overhangs = 0
+perimeter_generator = classic
+fill_density = 10%
+fill_pattern = alignedrectilinear
+extrusion_width = 0.4
+perimeter_extrusion_width = 0.5
+external_perimeter_extrusion_width = 0.5
+top_infill_extrusion_width = 0.5
+infill_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+first_layer_speed = 120
+external_perimeter_speed = 180
+perimeter_speed = 280
+infill_speed = 200
+solid_infill_speed = 280
+top_solid_infill_speed = 200
+gap_fill_speed = 280
+enable_dynamic_overhang_speeds = 0
+overhang_speed_3 = 150
+overhang_speed_2 = 20
+external_perimeter_acceleration = 5000
+perimeter_acceleration = 15000
+infill_acceleration = 15000
+solid_infill_acceleration = 20000
+first_layer_acceleration = 5000
+top_solid_infill_acceleration = 8000
+output_filename_format = J1Benchy_{print_time}.gcode
+

profile_sources/non-prusa-fff/Snapmaker/print/0.28 Extra Draft @Snapmaker (0.4 nozzle).ini

@@ -0,0 +1,26 @@
+[print:0.28 Extra Draft @Snapmaker (0.4 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.4")
+layer_height = 0.28
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 65
+ironing_speed = 30
+perimeters = 2
+top_solid_layers = 3
+top_solid_min_thickness = 0.6
+top_infill_extrusion_width = 0.45
+first_layer_speed = 50
+external_perimeter_speed = 85
+perimeter_speed = 95
+infill_speed = 95
+solid_infill_speed = 95
+top_solid_infill_speed = 70
+gap_fill_speed = 85
+support_material_speed = 100
+support_material_interface_speed = 50
+overhang_speed_3 = 55
+overhang_speed_2 = 30
+overhang_speed_1 = 10
+overhang_speed_0 = 10
+support_material_threshold = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.28 Extra Draft @Snapmaker Artisan (0.4 nozzle).ini

@@ -0,0 +1,12 @@
+[print:0.28 Extra Draft @Snapmaker Artisan (0.4 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.4")
+layer_height = 0.28
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 65
+perimeters = 2
+top_solid_layers = 3
+top_solid_min_thickness = 0.6
+top_infill_extrusion_width = 0.45
+support_material_threshold = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.28 Extra Draft @Snapmaker J1 (0.4 nozzle).ini

@@ -0,0 +1,12 @@
+[print:0.28 Extra Draft @Snapmaker J1 (0.4 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.4")
+layer_height = 0.28
+elefant_foot_compensation = 0.15
+initial_layer_infill_speed = 65
+perimeters = 2
+top_solid_layers = 3
+top_solid_min_thickness = 0.6
+top_infill_extrusion_width = 0.45
+support_material_threshold = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.30 Standard @Snapmaker (0.6 nozzle).ini

@@ -0,0 +1,31 @@
+[print:0.30 Standard @Snapmaker (0.6 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.3
+bridge_speed = 30
+initial_layer_infill_speed = 55
+ironing_speed = 30
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+perimeter_extrusion_width = 0.62
+external_perimeter_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+infill_extrusion_width = 0.62
+solid_infill_extrusion_width = 0.62
+support_material_extrusion_width = 0.62
+first_layer_speed = 35
+external_perimeter_speed = 75
+perimeter_speed = 85
+infill_speed = 100
+solid_infill_speed = 85
+top_solid_infill_speed = 100
+gap_fill_speed = 50
+support_material_speed = 100
+support_material_interface_speed = 35
+overhang_speed_3 = 0
+overhang_speed_2 = 50
+overhang_speed_1 = 15
+overhang_speed_0 = 10
+

profile_sources/non-prusa-fff/Snapmaker/print/0.30 Standard @Snapmaker Artisan (0.6 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.30 Standard @Snapmaker Artisan (0.6 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.3
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+perimeter_extrusion_width = 0.62
+external_perimeter_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+infill_extrusion_width = 0.62
+solid_infill_extrusion_width = 0.62
+support_material_extrusion_width = 0.62
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.30 Standard @Snapmaker J1 (0.6 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.30 Standard @Snapmaker J1 (0.6 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.3
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+perimeter_extrusion_width = 0.62
+external_perimeter_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+infill_extrusion_width = 0.62
+solid_infill_extrusion_width = 0.62
+support_material_extrusion_width = 0.62
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.30 Strength @Snapmaker (0.6 nozzle).ini

@@ -0,0 +1,32 @@
+[print:0.30 Strength @Snapmaker (0.6 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.3
+bridge_speed = 30
+initial_layer_infill_speed = 55
+ironing_speed = 30
+perimeters = 6
+top_solid_layers = 3
+fill_density = 25%
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+perimeter_extrusion_width = 0.62
+external_perimeter_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+infill_extrusion_width = 0.62
+solid_infill_extrusion_width = 0.62
+support_material_extrusion_width = 0.62
+first_layer_speed = 35
+external_perimeter_speed = 75
+perimeter_speed = 85
+infill_speed = 100
+solid_infill_speed = 85
+top_solid_infill_speed = 100
+gap_fill_speed = 50
+support_material_speed = 100
+support_material_interface_speed = 35
+overhang_speed_3 = 0
+overhang_speed_2 = 50
+overhang_speed_1 = 15
+overhang_speed_0 = 10
+

profile_sources/non-prusa-fff/Snapmaker/print/0.30 Strength @Snapmaker Artisan (0.6 nozzle).ini

@@ -0,0 +1,19 @@
+[print:0.30 Strength @Snapmaker Artisan (0.6 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.3
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 5
+top_solid_layers = 3
+fill_density = 25%
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+perimeter_extrusion_width = 0.62
+external_perimeter_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+infill_extrusion_width = 0.62
+solid_infill_extrusion_width = 0.62
+support_material_extrusion_width = 0.62
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.30 Strength @Snapmaker J1 (0.6 nozzle).ini

@@ -0,0 +1,19 @@
+[print:0.30 Strength @Snapmaker J1 (0.6 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.3
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 5
+top_solid_layers = 3
+fill_density = 25%
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+perimeter_extrusion_width = 0.62
+external_perimeter_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+infill_extrusion_width = 0.62
+solid_infill_extrusion_width = 0.62
+support_material_extrusion_width = 0.62
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.32 Standard @Snapmaker (0.8 nozzle).ini

@@ -0,0 +1,31 @@
+[print:0.32 Standard @Snapmaker (0.8 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.8")
+layer_height = 0.32
+bridge_speed = 30
+initial_layer_infill_speed = 55
+ironing_speed = 30
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 35
+external_perimeter_speed = 75
+perimeter_speed = 85
+infill_speed = 100
+solid_infill_speed = 85
+top_solid_infill_speed = 100
+gap_fill_speed = 50
+support_material_speed = 100
+support_material_interface_speed = 35
+overhang_speed_3 = 0
+overhang_speed_2 = 50
+overhang_speed_1 = 25
+overhang_speed_0 = 5
+

profile_sources/non-prusa-fff/Snapmaker/print/0.32 Standard @Snapmaker Artisan (0.8 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.32 Standard @Snapmaker Artisan (0.8 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.8")
+layer_height = 0.32
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.32 Standard @Snapmaker J1 (0.8 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.32 Standard @Snapmaker J1 (0.8 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8")
+layer_height = 0.32
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.34 Standard @Snapmaker (0.6 nozzle).ini

@@ -0,0 +1,32 @@
+[print:0.34 Standard @Snapmaker (0.6 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.34
+bridge_speed = 30
+initial_layer_infill_speed = 55
+ironing_speed = 30
+travel_speed = 110
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 35
+external_perimeter_speed = 75
+perimeter_speed = 85
+infill_speed = 100
+solid_infill_speed = 85
+top_solid_infill_speed = 100
+gap_fill_speed = 50
+support_material_speed = 100
+support_material_interface_speed = 35
+overhang_speed_3 = 0
+overhang_speed_2 = 50
+overhang_speed_1 = 15
+overhang_speed_0 = 10
+

profile_sources/non-prusa-fff/Snapmaker/print/0.34 Standard @Snapmaker Artisan (0.6 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.34 Standard @Snapmaker Artisan (0.6 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.34
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.34 Standard @Snapmaker J1 (0.6 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.34 Standard @Snapmaker J1 (0.6 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.34
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.36 Standard @Snapmaker (0.8 nozzle).ini

@@ -0,0 +1,31 @@
+[print:0.36 Standard @Snapmaker (0.8 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.8")
+layer_height = 0.36
+bridge_speed = 30
+initial_layer_infill_speed = 55
+ironing_speed = 30
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 35
+external_perimeter_speed = 75
+perimeter_speed = 85
+infill_speed = 100
+solid_infill_speed = 85
+top_solid_infill_speed = 100
+gap_fill_speed = 50
+support_material_speed = 100
+support_material_interface_speed = 35
+overhang_speed_3 = 0
+overhang_speed_2 = 50
+overhang_speed_1 = 25
+overhang_speed_0 = 5
+

profile_sources/non-prusa-fff/Snapmaker/print/0.36 Standard @Snapmaker Artisan (0.8 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.36 Standard @Snapmaker Artisan (0.8 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.8")
+layer_height = 0.36
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.36 Standard @Snapmaker J1 (0.8 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.36 Standard @Snapmaker J1 (0.8 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8")
+layer_height = 0.36
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.38 Standard @Snapmaker (0.6 nozzle).ini

@@ -0,0 +1,31 @@
+[print:0.38 Standard @Snapmaker (0.6 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.38
+bridge_speed = 30
+initial_layer_infill_speed = 55
+ironing_speed = 30
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 35
+external_perimeter_speed = 75
+perimeter_speed = 85
+infill_speed = 100
+solid_infill_speed = 85
+top_solid_infill_speed = 100
+gap_fill_speed = 50
+support_material_speed = 100
+support_material_interface_speed = 35
+overhang_speed_3 = 0
+overhang_speed_2 = 50
+overhang_speed_1 = 15
+overhang_speed_0 = 10
+

profile_sources/non-prusa-fff/Snapmaker/print/0.38 Standard @Snapmaker Artisan (0.6 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.38 Standard @Snapmaker Artisan (0.6 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.38
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.38 Standard @Snapmaker J1 (0.6 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.38 Standard @Snapmaker J1 (0.6 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.38
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.40 Standard @Snapmaker (0.8 nozzle).ini

@@ -0,0 +1,31 @@
+[print:0.40 Standard @Snapmaker (0.8 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.8")
+layer_height = 0.4
+bridge_speed = 30
+initial_layer_infill_speed = 55
+ironing_speed = 30
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 35
+external_perimeter_speed = 75
+perimeter_speed = 85
+infill_speed = 100
+solid_infill_speed = 85
+top_solid_infill_speed = 100
+gap_fill_speed = 50
+support_material_speed = 100
+support_material_interface_speed = 35
+overhang_speed_3 = 0
+overhang_speed_2 = 50
+overhang_speed_1 = 25
+overhang_speed_0 = 5
+

profile_sources/non-prusa-fff/Snapmaker/print/0.40 Standard @Snapmaker Artisan (0.8 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.40 Standard @Snapmaker Artisan (0.8 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.8")
+layer_height = 0.4
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.40 Standard @Snapmaker J1 (0.8 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.40 Standard @Snapmaker J1 (0.8 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8")
+layer_height = 0.4
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.42 Draft @Snapmaker (0.6 nozzle).ini

@@ -0,0 +1,31 @@
+[print:0.42 Draft @Snapmaker (0.6 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.42
+bridge_speed = 30
+initial_layer_infill_speed = 55
+ironing_speed = 30
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+perimeter_extrusion_width = 0.62
+external_perimeter_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+infill_extrusion_width = 0.62
+solid_infill_extrusion_width = 0.62
+support_material_extrusion_width = 0.62
+first_layer_speed = 35
+external_perimeter_speed = 75
+perimeter_speed = 85
+infill_speed = 100
+solid_infill_speed = 85
+top_solid_infill_speed = 100
+gap_fill_speed = 50
+support_material_speed = 100
+support_material_interface_speed = 35
+overhang_speed_3 = 0
+overhang_speed_2 = 50
+overhang_speed_1 = 15
+overhang_speed_0 = 10
+

profile_sources/non-prusa-fff/Snapmaker/print/0.42 Draft @Snapmaker Artisan (0.6 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.42 Draft @Snapmaker Artisan (0.6 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.42
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+perimeter_extrusion_width = 0.62
+external_perimeter_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+infill_extrusion_width = 0.62
+solid_infill_extrusion_width = 0.62
+support_material_extrusion_width = 0.62
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.42 Draft @Snapmaker J1 (0.6 nozzle).ini

@@ -0,0 +1,18 @@
+[print:0.42 Draft @Snapmaker J1 (0.6 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.6")
+layer_height = 0.42
+bridge_speed = 30
+initial_layer_infill_speed = 55
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+perimeter_extrusion_width = 0.62
+external_perimeter_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+infill_extrusion_width = 0.62
+solid_infill_extrusion_width = 0.62
+support_material_extrusion_width = 0.62
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.48 Draft @Snapmaker (0.8 nozzle).ini

@@ -0,0 +1,32 @@
+[print:0.48 Draft @Snapmaker (0.8 nozzle)]
+inherits = *fdm_process_common*
+compatible_printers_condition = (printer_model=="Snapmaker A250" or printer_model=="Snapmaker A250 BKit" or printer_model=="Snapmaker A250 Dual" or printer_model=="Snapmaker A250 Dual BKit" or printer_model=="Snapmaker A250 Dual QS+B Kit" or printer_model=="Snapmaker A250 Dual QSKit" or printer_model=="Snapmaker A250 QS+B Kit" or printer_model=="Snapmaker A250 QSKit" or printer_model=="Snapmaker A350" or printer_model=="Snapmaker A350 BKit" or printer_model=="Snapmaker A350 Dual" or printer_model=="Snapmaker A350 Dual BKit" or printer_model=="Snapmaker A350 Dual QS+B Kit" or printer_model=="Snapmaker A350 Dual QSKit" or printer_model=="Snapmaker A350 QS+B Kit" or printer_model=="Snapmaker A350 QSKit") and (nozzle_diameter[0]=="0.8")
+layer_height = 0.48
+bridge_speed = 30
+initial_layer_infill_speed = 55
+ironing_speed = 30
+first_layer_height = 0.4
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 35
+external_perimeter_speed = 75
+perimeter_speed = 85
+infill_speed = 100
+solid_infill_speed = 85
+top_solid_infill_speed = 100
+gap_fill_speed = 50
+support_material_speed = 100
+support_material_interface_speed = 35
+overhang_speed_3 = 0
+overhang_speed_2 = 50
+overhang_speed_1 = 25
+overhang_speed_0 = 5
+

profile_sources/non-prusa-fff/Snapmaker/print/0.48 Draft @Snapmaker Artisan (0.8 nozzle).ini

@@ -0,0 +1,19 @@
+[print:0.48 Draft @Snapmaker Artisan (0.8 nozzle)]
+inherits = *fdm_process_a400*
+compatible_printers_condition = (printer_model=="Snapmaker Artisan") and (nozzle_diameter[0]=="0.8")
+layer_height = 0.48
+bridge_speed = 30
+initial_layer_infill_speed = 55
+first_layer_height = 0.4
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/0.48 Draft @Snapmaker J1 (0.8 nozzle).ini

@@ -0,0 +1,19 @@
+[print:0.48 Draft @Snapmaker J1 (0.8 nozzle)]
+inherits = *fdm_process_idex*
+compatible_printers_condition = (printer_model=="Snapmaker J1") and (nozzle_diameter[0]=="0.8")
+layer_height = 0.48
+bridge_speed = 30
+initial_layer_infill_speed = 55
+first_layer_height = 0.4
+perimeters = 2
+top_solid_layers = 3
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+perimeter_extrusion_width = 0.82
+external_perimeter_extrusion_width = 0.82
+top_infill_extrusion_width = 0.82
+infill_extrusion_width = 0.82
+solid_infill_extrusion_width = 0.82
+support_material_extrusion_width = 0.82
+first_layer_speed = 40
+

profile_sources/non-prusa-fff/Snapmaker/print/_fdm_process_a400_.ini

@@ -0,0 +1,86 @@
+[print:*fdm_process_a400*]
+inherits = *fdm_process_common*
+initial_layer_infill_speed = 75
+travel_speed = 190
+default_acceleration = 2000
+travel_acceleration = 3000
+infill_jerk = 8
+initial_layer_jerk = 8
+outer_wall_jerk = 4
+top_surface_jerk = 4
+travel_jerk = 10
+raft_expansion = 2
+brim_type = no_brim
+small_perimeter_threshold = 0
+support_material_synchronize_layers = 1
+first_layer_height = 0.2
+arc_fitting = emit_center
+perimeters = 3
+top_solid_layers = 4
+top_solid_min_thickness = 0.8
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+avoid_crossing_perimeters = 1
+overhangs = 1
+perimeter_generator = arachne
+fill_density = 15%
+fill_pattern = cubic
+extrusion_width = 0.42
+first_layer_extrusion_width = 0.5
+perimeter_extrusion_width = 0.42
+external_perimeter_extrusion_width = 0.45
+top_infill_extrusion_width = 0.42
+infill_extrusion_width = 0.45
+solid_infill_extrusion_width = 0.42
+support_material_extrusion_width = 0.42
+xy_size_compensation = 0
+ironing_flowrate = 10%
+bridge_flow_ratio = 0.95
+thin_walls = 0
+first_layer_speed = 50
+external_perimeter_speed = 145
+perimeter_speed = 160
+infill_speed = 160
+solid_infill_speed = 160
+top_solid_infill_speed = 100
+gap_fill_speed = 160
+support_material_speed = 100
+support_material_interface_speed = 50
+enable_dynamic_overhang_speeds = 1
+overhang_speed_3 = 0
+overhang_speed_2 = 25
+overhang_speed_1 = 15
+overhang_speed_0 = 10
+external_perimeter_acceleration = 1000
+perimeter_acceleration = 2000
+infill_acceleration = 2000
+solid_infill_acceleration = 2000
+first_layer_acceleration = 500
+top_solid_infill_acceleration = 1000
+support_material = 0
+support_material_style = snug
+support_material_buildplate_only = 1
+support_material_extruder = 1
+support_material_interface_extruder = 2
+support_material_contact_distance = 0
+support_material_bottom_contact_distance = 0
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_threshold = 30
+support_material_interface_layers = 3
+support_material_bottom_interface_layers = 3
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.12
+support_tree_branch_distance = 5
+support_tree_branch_diameter = 5
+support_tree_branch_diameter_angle = 15
+dont_support_bridges = 1
+skirts = 0
+brim_separation = 0
+wipe_tower = 1
+wipe_tower_width = 25
+wipe_tower_brim_width = 5
+spiral_vase = 0
+fuzzy_skin_point_dist = 0.8
+output_filename_format = {input_filename_base}_{layer_height}mm_{print_time}.gcode
+

profile_sources/non-prusa-fff/Snapmaker/print/_fdm_process_common_.ini

@@ -0,0 +1,171 @@
+[print:*fdm_process_common*]
+adaptive_layer_height = 0
+layer_height = 0.2
+seam_position = aligned
+seam_gap = 15%
+role_based_wipe_speed = 1
+wipe_speed = 80%
+wipe_on_loops = 1
+slice_closing_radius = 0.049
+resolution = 0.012
+xy_contour_compensation = 0
+elefant_foot_compensation = 0.1
+precise_outer_wall = 1
+ironing_spacing = 0.15
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wall_distribution_count = 1
+min_bead_width = 85%
+min_feature_size = 25%
+bridge_density = 100%
+thick_bridges = 1
+top_solid_infill_flow_ratio = 1
+bottom_solid_infill_flow_ratio = 1.2
+only_one_wall_top = 0
+only_one_wall_first_layer = 0
+max_travel_detour_distance = 0
+wipe_tower_no_sparse_layers = 0
+draft_shield = disabled
+independent_support_layer_height = 1
+interface_shells = 0
+max_bridge_length = 10
+print_flow_ratio = 1
+top_surface_pattern = monotonic
+bottom_surface_pattern = monotonic
+filter_out_gap_fill = 0
+infill_wall_overlap = 15%
+infill_direction = 45
+bridge_angle = 0
+minimum_sparse_infill_area = 15
+infill_combination = 0
+detect_narrow_internal_solid_infill = 1
+ensure_vertical_shell_thickness = 1
+internal_bridge_support_thickness = 0.8
+initial_layer_infill_speed = 50
+initial_layer_travel_speed = 80%
+ironing_speed = 35
+overhang_speed_classic = 0
+bridge_speed = 50
+travel_speed = 120
+default_acceleration = 1100
+bridge_acceleration = 1000
+travel_acceleration = 1100
+default_jerk = 0
+infill_jerk = 4
+initial_layer_jerk = 4
+inner_wall_jerk = 4
+outer_wall_jerk = 2
+top_surface_jerk = 2
+travel_jerk = 4
+support_type = normal(auto)
+support_critical_regions_only = 1
+raft_layers = 0
+raft_contact_distance = 0.1
+raft_expansion = 2
+raft_first_layer_density = 90%
+tree_support_wall_count = 2
+tree_support_adaptive_layer_height = 1
+tree_support_auto_brim = 1
+tree_support_brim_width = 3
+tree_support_with_infill = 0
+support_angle = 0
+support_bottom_interface_spacing = 0.12
+support_interface_loop_pattern = 0
+support_expansion = 1
+support_object_xy_distance = 0.9
+skirt_distance = 2
+skirt_height = 1
+brim_type = no_brim
+brim_width = 5
+prime_volume = 7.3
+wipe_tower_cone_angle = 40
+flush_into_infill = 0
+flush_into_support = 1
+flush_into_objects = 0
+slicing_mode = regular
+print_sequence = by layer
+fuzzy_skin = none
+fuzzy_skin_thickness = 0.3
+reduce_infill_retraction = 1
+gcode_comments = 0
+gcode_add_line_number = 0
+gcode_label_objects = 1
+post_process = 
+enforce_support_layers = 0
+exclude_object = 0
+standby_temperature_delta = -45
+timelapse_type = 0
+gap_fill_enabled = 0
+single_extruder_multi_material_priming = 0
+first_layer_height = 0.3
+arc_fitting = disabled
+perimeters = 3
+top_solid_layers = 4
+top_solid_min_thickness = 0.8
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+avoid_crossing_perimeters = 1
+overhangs = 1
+perimeter_generator = arachne
+fill_density = 15%
+fill_pattern = cubic
+extrusion_width = 0.42
+first_layer_extrusion_width = 0.5
+perimeter_extrusion_width = 0.42
+external_perimeter_extrusion_width = 0.45
+top_infill_extrusion_width = 0.42
+infill_extrusion_width = 0.45
+solid_infill_extrusion_width = 0.42
+support_material_extrusion_width = 0.42
+xy_size_compensation = 0
+ironing_flowrate = 10%
+bridge_flow_ratio = 0.95
+thin_walls = 0
+first_layer_speed = 50
+external_perimeter_speed = 70
+perimeter_speed = 80
+infill_speed = 85
+solid_infill_speed = 100
+top_solid_infill_speed = 100
+gap_fill_speed = 100
+support_material_speed = 80
+support_material_interface_speed = 50
+enable_dynamic_overhang_speeds = 1
+overhang_speed_3 = 35
+overhang_speed_2 = 25
+overhang_speed_1 = 15
+overhang_speed_0 = 10
+external_perimeter_acceleration = 1000
+perimeter_acceleration = 1100
+infill_acceleration = 1100
+solid_infill_acceleration = 1100
+first_layer_acceleration = 500
+top_solid_infill_acceleration = 1000
+support_material = 0
+support_material_style = snug
+support_material_buildplate_only = 1
+support_material_extruder = 0
+support_material_interface_extruder = 0
+support_material_contact_distance = 0
+support_material_bottom_contact_distance = 0.12
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_threshold = 30
+support_material_interface_layers = 2
+support_material_bottom_interface_layers = 3
+support_material_interface_pattern = auto
+support_material_interface_spacing = 0.12
+support_tree_branch_distance = 5
+support_tree_branch_diameter = 5
+support_tree_branch_diameter_angle = 15
+dont_support_bridges = 1
+skirts = 0
+brim_separation = 0
+wipe_tower = 1
+wipe_tower_width = 25
+wipe_tower_brim_width = 5
+spiral_vase = 0
+fuzzy_skin_point_dist = 0.8
+output_filename_format = {input_filename_base}_{layer_height}mm_{print_time}.gcode
+

profile_sources/non-prusa-fff/Snapmaker/print/_fdm_process_idex_.ini

@@ -0,0 +1,87 @@
+[print:*fdm_process_idex*]
+inherits = *fdm_process_common*
+initial_layer_infill_speed = 75
+travel_speed = 300
+default_acceleration = 10000
+bridge_acceleration = 2000
+travel_acceleration = 10000
+infill_jerk = 8
+initial_layer_jerk = 8
+outer_wall_jerk = 4
+top_surface_jerk = 4
+travel_jerk = 10
+raft_expansion = 2
+brim_type = no_brim
+small_perimeter_threshold = 0
+support_material_synchronize_layers = 1
+first_layer_height = 0.2
+arc_fitting = emit_center
+perimeters = 3
+top_solid_layers = 4
+top_solid_min_thickness = 0.8
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+avoid_crossing_perimeters = 1
+overhangs = 1
+perimeter_generator = arachne
+fill_density = 15%
+fill_pattern = cubic
+extrusion_width = 0.42
+first_layer_extrusion_width = 0.5
+perimeter_extrusion_width = 0.42
+external_perimeter_extrusion_width = 0.45
+top_infill_extrusion_width = 0.42
+infill_extrusion_width = 0.45
+solid_infill_extrusion_width = 0.42
+support_material_extrusion_width = 0.42
+xy_size_compensation = 0
+ironing_flowrate = 10%
+bridge_flow_ratio = 0.95
+thin_walls = 0
+first_layer_speed = 50
+external_perimeter_speed = 145
+perimeter_speed = 250
+infill_speed = 250
+solid_infill_speed = 250
+top_solid_infill_speed = 100
+gap_fill_speed = 250
+support_material_speed = 100
+support_material_interface_speed = 50
+enable_dynamic_overhang_speeds = 1
+overhang_speed_3 = 60
+overhang_speed_2 = 30
+overhang_speed_1 = 10
+overhang_speed_0 = 10
+external_perimeter_acceleration = 1000
+perimeter_acceleration = 6000
+infill_acceleration = 10000
+solid_infill_acceleration = 10000
+first_layer_acceleration = 500
+top_solid_infill_acceleration = 2000
+support_material = 0
+support_material_style = snug
+support_material_buildplate_only = 1
+support_material_extruder = 1
+support_material_interface_extruder = 2
+support_material_contact_distance = 0
+support_material_bottom_contact_distance = 0
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_threshold = 30
+support_material_interface_layers = 3
+support_material_bottom_interface_layers = 3
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.12
+support_tree_branch_distance = 5
+support_tree_branch_diameter = 5
+support_tree_branch_diameter_angle = 15
+dont_support_bridges = 1
+skirts = 0
+brim_separation = 0
+wipe_tower = 1
+wipe_tower_width = 25
+wipe_tower_brim_width = 5
+spiral_vase = 0
+fuzzy_skin_point_dist = 0.8
+output_filename_format = {input_filename_base}_{layer_height}mm_{print_time}_J1.gcode
+