Initial Profile Sources

2026-10-01 02:27:17 +00:00 · 2026-03-19 01:54:47 +00:00
parent 7e2e8f9d47
commit 1f7873734a
13374 changed files with 256890 additions and 0 deletions
@@ -0,0 +1,19 @@
+[filament:3D-Fuel PET-CF]
+inherits = *PET*
+bed_temperature = 80    
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_max_volumetric_speed = 8
+filament_type = PET
+filament_density = 1.4
+filament_cost = 99.90
+filament_vendor = 3D-Fuel
+first_layer_bed_temperature = 80
+first_layer_temperature = 260
+fan_always_on = 1
+max_fan_speed = 20
+min_fan_speed = 0
+bridge_fan_speed = 20
+temperature = 260
+
@@ -0,0 +1,19 @@
+[filament:3D-Fuel Pro PCTG ReFuel]
+inherits = *PET*
+bed_temperature = 80    
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_max_volumetric_speed = 8
+filament_type = PCTG
+filament_density = 1.23
+filament_cost = 39.90
+filament_vendor = 3D-Fuel
+first_layer_bed_temperature = 80
+first_layer_temperature = 255
+fan_always_on = 1
+max_fan_speed = 40
+min_fan_speed = 0
+bridge_fan_speed = 80
+temperature = 255
+
@@ -0,0 +1,19 @@
+[filament:3D-Fuel Pro PCTG]
+inherits = *PET*
+bed_temperature = 80    
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_max_volumetric_speed = 8
+filament_type = PCTG
+filament_density = 1.23
+filament_cost = 29.95
+filament_vendor = 3D-Fuel
+first_layer_bed_temperature = 80
+first_layer_temperature = 255
+fan_always_on = 1
+max_fan_speed = 40
+min_fan_speed = 0
+bridge_fan_speed = 80
+temperature = 255
+
@@ -0,0 +1,19 @@
+[filament:3D-Fuel Pro PETG Refuel]
+inherits = *PET*
+bed_temperature = 80
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_max_volumetric_speed = 8
+filament_type = PETG
+filament_density = 1.23
+filament_cost = 28.95
+filament_vendor = 3D-Fuel
+first_layer_bed_temperature = 80
+first_layer_temperature = 255
+fan_always_on = 1
+max_fan_speed = 40
+min_fan_speed = 0
+bridge_fan_speed = 80
+temperature = 255
+
@@ -0,0 +1,19 @@
+[filament:3D-Fuel Pro PETG]
+inherits = *PET*
+bed_temperature = 80
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_max_volumetric_speed = 8
+filament_type = PETG
+filament_density = 1.23
+filament_cost = 29.95
+filament_vendor = 3D-Fuel
+first_layer_bed_temperature = 80
+first_layer_temperature = 255
+fan_always_on = 1
+max_fan_speed = 40
+min_fan_speed = 0
+bridge_fan_speed = 80
+temperature = 255
+
@@ -0,0 +1,19 @@
+[filament:3D-Fuel Silk PLA+]
+inherits = *PLA*
+bed_temperature = 60    
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_max_volumetric_speed = 10
+filament_type = PLA
+filament_density = 1.24
+filament_cost = 29.90
+filament_vendor = 3D-Fuel
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+fan_always_on = 1
+max_fan_speed = 100
+min_fan_speed = 100
+bridge_fan_speed = 100
+temperature = 210
+
@@ -0,0 +1,19 @@
+[filament:3D-Fuel Standard PLA+ ReFuel]
+inherits = *PLA*
+bed_temperature = 60    
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_max_volumetric_speed = 10
+filament_type = PLA
+filament_density = 1.24
+filament_cost = 25.95
+filament_vendor = 3D-Fuel
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+fan_always_on = 1
+max_fan_speed = 100
+min_fan_speed = 100
+bridge_fan_speed = 100
+temperature = 210
+
@@ -0,0 +1,19 @@
+[filament:3D-Fuel Standard PLA+]
+inherits = *PLA*
+bed_temperature = 60    
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_max_volumetric_speed = 10
+filament_type = PLA
+filament_density = 1.24
+filament_cost = 29.90
+filament_vendor = 3D-Fuel
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+fan_always_on = 1
+max_fan_speed = 100
+min_fan_speed = 100
+bridge_fan_speed = 100
+temperature = 215
+
@@ -0,0 +1,19 @@
+[filament:3D-Fuel Tough Pro PLA+ ReFuel]
+inherits = *PLA*
+bed_temperature = 60    
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_max_volumetric_speed = 10
+filament_type = PLA
+filament_density = 1.24
+filament_cost = 32.95
+filament_vendor = 3D-Fuel
+first_layer_bed_temperature = 60
+first_layer_temperature = 220
+fan_always_on = 1
+max_fan_speed = 100
+min_fan_speed = 100
+bridge_fan_speed = 100
+temperature = 220
+
@@ -0,0 +1,19 @@
+[filament:3D-Fuel Tough Pro PLA+]
+inherits = *PLA*
+bed_temperature = 60    
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_max_volumetric_speed = 10
+filament_type = PLA
+filament_density = 1.24
+filament_cost = 32.95
+filament_vendor = 3D-Fuel
+first_layer_bed_temperature = 60
+first_layer_temperature = 220
+fan_always_on = 1
+max_fan_speed = 100
+min_fan_speed = 100
+bridge_fan_speed = 100
+temperature = 220
+
@@ -0,0 +1,6 @@
+[filament:AmazonBasics PLA]
+inherits = *PLA*
+filament_vendor = AmazonBasics
+filament_cost = 25.4
+filament_density = 1.24
+
@@ -0,0 +1,22 @@
+[filament:AmazonBasics TPU]
+inherits = *FLEX*
+filament_vendor = AmazonBasics
+fan_always_on = 1
+filament_max_volumetric_speed = 1.8
+extrusion_multiplier = 1.14
+first_layer_temperature = 235
+first_layer_bed_temperature = 50
+temperature = 235
+bed_temperature = 50
+bridge_fan_speed = 100
+max_fan_speed = 80
+min_fan_speed = 80
+filament_retract_before_travel = 3
+filament_cost = 19.99
+filament_density = 1.21
+disable_fan_first_layers = 4
+full_fan_speed_layer = 6
+min_print_speed = 15
+slowdown_below_layer_time = 10
+cooling = 1
+
@@ -0,0 +1,18 @@
+[filament:ColorFabb HT]
+inherits = *PET*
+filament_vendor = ColorFabb
+bed_temperature = 100
+bridge_fan_speed = 30
+cooling = 1
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 10
+filament_cost = 65.66
+filament_density = 1.18
+filament_spool_weight = 236
+first_layer_bed_temperature = 100
+first_layer_temperature = 270
+max_fan_speed = 20
+min_fan_speed = 10
+temperature = 270
+
@@ -0,0 +1,7 @@
+[filament:ColorFabb PLA-PHA]
+inherits = *PLA*
+filament_vendor = ColorFabb
+filament_cost = 54.84
+filament_density = 1.24
+filament_spool_weight = 236
+
@@ -0,0 +1,11 @@
+[filament:ColorFabb VarioShore TPU]
+inherits = Fillamentum Flexfill 98A
+filament_vendor = ColorFabb
+filament_colour = #BBBBBB
+filament_cost = 71.35
+filament_density = 1.22
+filament_spool_weight = 0
+extrusion_multiplier = 0.85
+first_layer_temperature = 220
+temperature = 220
+
@@ -0,0 +1,12 @@
+[filament:ColorFabb XT-CF20]
+inherits = *PET*
+filament_vendor = ColorFabb
+extrusion_multiplier = 1.05
+filament_cost = 80.65
+filament_density = 1.35
+filament_spool_weight = 236
+filament_colour = #804040
+first_layer_bed_temperature = 90
+first_layer_temperature = 260
+temperature = 260
+
@@ -0,0 +1,10 @@
+[filament:ColorFabb XT]
+inherits = *PET*
+filament_vendor = ColorFabb
+filament_cost = 62.90
+filament_density = 1.27
+filament_spool_weight = 236
+first_layer_bed_temperature = 90
+first_layer_temperature = 260
+temperature = 270
+
@@ -0,0 +1,9 @@
+[filament:ColorFabb bronzeFill]
+inherits = *PLA*
+filament_vendor = ColorFabb
+extrusion_multiplier = 1.12
+filament_cost = 80.65
+filament_density = 3.9
+filament_spool_weight = 236
+filament_colour = #804040
+
@@ -0,0 +1,9 @@
+[filament:ColorFabb copperFill]
+inherits = *PLA*
+filament_vendor = ColorFabb
+extrusion_multiplier = 1.1
+filament_cost = 80.65
+filament_density = 3.9
+filament_spool_weight = 236
+filament_colour = #82603E
+
@@ -0,0 +1,11 @@
+[filament:ColorFabb corkFill]
+inherits = *PLA*
+filament_vendor = ColorFabb
+extrusion_multiplier = 1.1
+filament_cost = 78.63
+filament_density = 1.18
+filament_spool_weight = 236
+filament_colour = #634d33
+first_layer_temperature = 220
+temperature = 220
+
@@ -0,0 +1,18 @@
+[filament:ColorFabb nGen flex]
+inherits = *FLEX*
+filament_vendor = ColorFabb
+filament_cost = 58.30
+filament_density = 1
+filament_spool_weight = 236
+bed_temperature = 85
+bridge_fan_speed = 40
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_below_layer_time = 10
+first_layer_bed_temperature = 85
+first_layer_temperature = 260
+max_fan_speed = 35
+min_fan_speed = 20
+temperature = 260
+
@@ -0,0 +1,14 @@
+[filament:ColorFabb nGen]
+inherits = *PET*
+filament_vendor = ColorFabb
+filament_cost = 52.46
+filament_density = 1.2
+filament_spool_weight = 236
+bridge_fan_speed = 40
+fan_always_on = 0
+fan_below_layer_time = 10
+filament_type = NGEN
+first_layer_temperature = 240
+max_fan_speed = 35
+min_fan_speed = 20
+
@@ -0,0 +1,9 @@
+[filament:ColorFabb steelFill]
+inherits = *PLA*
+filament_vendor = ColorFabb
+extrusion_multiplier = 1.1
+filament_cost = 80.65
+filament_density = 3.13
+filament_spool_weight = 236
+filament_colour = #808080
+
@@ -0,0 +1,11 @@
+[filament:ColorFabb woodFill]
+inherits = *PLA*
+filament_vendor = ColorFabb
+extrusion_multiplier = 1.1
+filament_cost = 78.63
+filament_density = 1.15
+filament_spool_weight = 236
+filament_colour = #dfc287
+first_layer_temperature = 200
+temperature = 200
+
@@ -0,0 +1,8 @@
+[filament:Cookiecad PLA]
+inherits = *PLA*
+filament_vendor = Cookiecad
+filament_cost = 34.95
+filament_density = 1.25
+filament_spool_weight = 180
+first_layer_bed_temperature = 70
+
@@ -0,0 +1,6 @@
+[filament:Das Filament PLA]
+inherits = *PLA*
+filament_vendor = Das Filament
+filament_cost = 25.4
+filament_density = 1.24
+
@@ -0,0 +1,11 @@
+[filament:Devil Design PETG]
+inherits = *PET*
+filament_vendor = Devil Design
+filament_cost = 20.99
+filament_density = 1.23
+filament_spool_weight = 250
+first_layer_temperature = 230
+first_layer_bed_temperature = 85
+temperature = 230
+bed_temperature = 90
+
@@ -0,0 +1,7 @@
+[filament:Devil Design PLA]
+inherits = *PLA*
+filament_vendor = Devil Design
+filament_cost = 20.99
+filament_density = 1.24
+filament_spool_weight = 250
+
@@ -0,0 +1,7 @@
+[filament:E3D Edge]
+inherits = *PET*
+filament_vendor = E3D
+filament_cost = 56.9
+filament_density = 1.26
+filament_type = EDGE
+
@@ -0,0 +1,9 @@
+[filament:E3D PC-ABS]
+inherits = *ABS*
+filament_vendor = E3D
+filament_cost = 0
+filament_type = PC
+filament_density = 1.05
+first_layer_temperature = 270
+temperature = 270
+
@@ -0,0 +1,6 @@
+[filament:EUMAKERS PLA]
+inherits = *PLA*
+filament_vendor = EUMAKERS
+filament_cost = 25.4
+filament_density = 1.24
+
@@ -0,0 +1,5 @@
+[filament:Eolas Prints INGEO 850]
+inherits = Eolas Prints PLA
+filament_cost = 25.90
+temperature = 210
+
@@ -0,0 +1,8 @@
+[filament:Eolas Prints INGEO 870]
+inherits = Eolas Prints PLA
+filament_cost = 25.90
+temperature = 215
+first_layer_bed_temperature = 68
+first_layer_temperature = 220
+bed_temperature = 65
+
@@ -0,0 +1,6 @@
+[filament:Eolas Prints PETG - UV Resistant]
+inherits = Eolas Prints PETG
+filament_cost = 35.90
+temperature = 237
+first_layer_temperature = 232
+
@@ -0,0 +1,12 @@
+[filament:Eolas Prints PETG]
+inherits = *PET*
+filament_vendor = Eolas Prints
+filament_cost = 29.90
+filament_density = 1.27
+filament_spool_weight = 0
+filament_colour = #4D9398
+temperature = 240
+first_layer_bed_temperature = 85
+first_layer_temperature = 235
+bed_temperature = 90
+
@@ -0,0 +1,5 @@
+[filament:Eolas Prints PLA Matte]
+inherits = Eolas Prints PLA
+filament_cost = 25.50
+temperature = 212
+
@@ -0,0 +1,9 @@
+[filament:Eolas Prints PLA]
+inherits = *PLA*
+filament_vendor = Eolas Prints
+filament_cost = 23.50
+filament_density = 1.24
+filament_spool_weight = 0
+filament_colour = #4D9398
+temperature = 208
+
@@ -0,0 +1,13 @@
+[filament:Eolas Prints TPU 93A]
+inherits = *FLEX*
+filament_vendor = Eolas Prints
+filament_cost = 34.99
+filament_density = 1.21
+filament_colour = #4D9398
+filament_max_volumetric_speed = 1.2
+temperature = 235
+first_layer_bed_temperature = 30
+bed_temperature = 30
+filament_retract_length = 0
+extrusion_multiplier = 1.16
+
@@ -0,0 +1,7 @@
+[filament:Esun ABS]
+inherits = *ABSC*
+filament_vendor = Esun
+filament_cost = 27.82
+filament_density = 1.01
+filament_spool_weight = 265
+
@@ -0,0 +1,7 @@
+[filament:Esun PLA]
+inherits = *PLA*
+filament_vendor = Esun
+filament_cost = 25.4
+filament_density = 1.24
+filament_spool_weight = 265
+
@@ -0,0 +1,15 @@
+[filament:Extrudr BioFusion]
+inherits = *PLA*
+filament_vendor = Extrudr
+disable_fan_first_layers = 3
+full_fan_speed_layer = 0
+filament_cost = 31.23
+filament_density = 1.25
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=121"
+first_layer_temperature = 220
+temperature = 220
+max_fan_speed = 45
+min_fan_speed = 25
+slowdown_below_layer_time = 20
+filament_spool_weight = 230
+
@@ -0,0 +1,12 @@
+[filament:Extrudr DuraPro ASA]
+inherits = Fillamentum ASA
+filament_vendor = Extrudr
+bed_temperature = 90
+filament_cost = 34.64
+filament_density = 1.05
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=120"
+first_layer_bed_temperature = 90
+first_layer_temperature = 220
+temperature = 220
+filament_spool_weight = 230
+
@@ -0,0 +1,14 @@
+[filament:Extrudr Flax]
+inherits = *PLA*
+filament_vendor = Extrudr
+filament_cost = 50.91
+filament_density = 1.45
+filament_notes = "High Performance Filament for decorative parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=131"
+first_layer_temperature = 190
+temperature = 190
+max_fan_speed = 80
+min_fan_speed = 30
+full_fan_speed_layer = 0
+slowdown_below_layer_time = 20
+filament_spool_weight = 262
+
@@ -0,0 +1,12 @@
+[filament:Extrudr Flex Hard]
+inherits = *FLEX*
+filament_vendor = Extrudr
+disable_fan_first_layers = 1
+extrusion_multiplier = 1.15
+filament_cost = 39.98
+filament_density = 1.2
+filament_max_volumetric_speed = 3
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=115"
+filament_spool_weight = 230
+slowdown_below_layer_time = 20
+
@@ -0,0 +1,12 @@
+[filament:Extrudr Flex Medium]
+inherits = *FLEX*
+filament_vendor = Extrudr
+disable_fan_first_layers = 1
+extrusion_multiplier = 1.15
+filament_cost = 39.98
+filament_density = 1.19
+filament_max_volumetric_speed = 3
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=117"
+filament_spool_weight = 230
+slowdown_below_layer_time = 20
+
@@ -0,0 +1,12 @@
+[filament:Extrudr Flex SemiSoft]
+inherits = *FLEX*
+filament_vendor = Extrudr
+disable_fan_first_layers = 1
+extrusion_multiplier = 1.15
+filament_cost = 39.98
+filament_density = 1.18
+filament_max_volumetric_speed = 1.8
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=116"
+filament_spool_weight = 230
+slowdown_below_layer_time = 20
+
@@ -0,0 +1,14 @@
+[filament:Extrudr GreenTEC Pro Carbon]
+inherits = *PLA*
+filament_vendor = Extrudr
+filament_cost = 62.49
+filament_density = 1.2
+filament_notes = "High Performance Filament for technical parts.\nPrints as easily as PLA with much higher stregnth and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=138"
+first_layer_temperature = 225
+max_fan_speed = 80
+min_fan_speed = 30
+temperature = 225
+full_fan_speed_layer = 0
+slowdown_below_layer_time = 20
+filament_spool_weight = 230
+
@@ -0,0 +1,13 @@
+[filament:Extrudr GreenTEC Pro]
+inherits = *PLA*
+filament_vendor = Extrudr
+filament_cost = 56.23
+filament_density = 1.35
+filament_notes = "High Performance Filament for technical parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=134"
+temperature = 215
+max_fan_speed = 80
+min_fan_speed = 30
+full_fan_speed_layer = 0
+slowdown_below_layer_time = 20
+filament_spool_weight = 230
+
@@ -0,0 +1,11 @@
+[filament:Extrudr GreenTEC]
+inherits = *PLA*
+filament_vendor = Extrudr
+filament_cost = 50.91
+filament_density = 1.3
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?ignorechildren=1&material=106"
+first_layer_temperature = 208
+temperature = 208
+slowdown_below_layer_time = 20
+filament_spool_weight = 262
+
@@ -0,0 +1,14 @@
+[filament:Extrudr PETG]
+inherits = *PET*
+filament_vendor = Extrudr
+bed_temperature = 70
+filament_cost = 35.45
+filament_density = 1.29
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=94"
+first_layer_bed_temperature = 70
+first_layer_temperature = 220
+temperature = 220
+slowdown_below_layer_time = 20
+filament_spool_weight = 262
+full_fan_speed_layer = 0
+
@@ -0,0 +1,16 @@
+[filament:Extrudr PLA NX1]
+inherits = *PLA*
+filament_vendor = Extrudr
+filament_cost = 22.76
+filament_density = 1.24
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=97"
+temperature = 205
+bed_temperature = 60
+first_layer_temperature = 205
+first_layer_bed_temperature = 60
+full_fan_speed_layer = 0
+max_fan_speed = 90
+min_fan_speed = 30
+slowdown_below_layer_time = 20
+filament_spool_weight = 262
+
@@ -0,0 +1,6 @@
+[filament:Extrudr PLA NX2]
+inherits = Extrudr PLA NX1
+filament_cost = 23.63
+filament_density = 1.3
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=128"
+
@@ -0,0 +1,9 @@
+[filament:Extrudr XPETG CF]
+inherits = Extrudr PETG
+filament_cost = 62.49
+filament_density = 1.29
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=198"
+first_layer_temperature = 235
+temperature = 235
+filament_spool_weight = 230
+
@@ -0,0 +1,8 @@
+[filament:Extrudr XPETG Matt]
+inherits = Extrudr PETG
+filament_cost = 29.99
+filament_density = 1.41
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=199"
+first_layer_temperature = 230
+temperature = 230
+
@@ -0,0 +1,21 @@
+[filament:Fiberlogy ASA]
+inherits = *ABS*
+filament_vendor = Fiberlogy
+filament_cost = 33
+filament_density = 1.07
+filament_spool_weight = 330
+fan_always_on = 0
+cooling = 1
+min_fan_speed = 10
+max_fan_speed = 15
+bridge_fan_speed = 30
+min_print_speed = 15
+slowdown_below_layer_time = 15
+first_layer_temperature = 260
+temperature = 260
+first_layer_bed_temperature = 100
+bed_temperature = 100
+filament_type = ASA
+fan_below_layer_time = 30
+disable_fan_first_layers = 5
+
@@ -0,0 +1,22 @@
+[filament:Fiberlogy CPE HT]
+inherits = *PET*
+filament_vendor = Fiberlogy
+filament_cost = 42.67
+filament_density = 1.18
+extrusion_multiplier = 0.98
+filament_spool_weight = 330
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 0
+max_fan_speed = 0
+bridge_fan_speed = 50
+min_print_speed = 15
+first_layer_temperature = 275
+temperature = 275
+first_layer_bed_temperature = 105
+bed_temperature = 105
+filament_type = CPE
+fan_below_layer_time = 20
+slowdown_below_layer_time = 15
+disable_fan_first_layers = 5
+
@@ -0,0 +1,18 @@
+[filament:Fiberlogy Easy ABS]
+inherits = Fiberlogy ASA
+filament_cost = 22.67
+filament_density = 1.09
+fan_always_on = 0
+cooling = 1
+min_fan_speed = 10
+max_fan_speed = 15
+min_print_speed = 15
+slowdown_below_layer_time = 15
+first_layer_temperature = 250
+temperature = 250
+first_layer_bed_temperature = 100
+bed_temperature = 100
+filament_type = ABS
+fan_below_layer_time = 25
+disable_fan_first_layers = 5
+
@@ -0,0 +1,17 @@
+[filament:Fiberlogy Easy PET-G]
+inherits = *PET*
+filament_vendor = Fiberlogy
+filament_spool_weight = 330
+filament_cost = 20
+filament_density = 1.27
+first_layer_bed_temperature = 80
+bed_temperature = 80
+first_layer_temperature = 235
+temperature = 235
+min_fan_speed = 15
+max_fan_speed = 30
+bridge_fan_speed = 60
+disable_fan_first_layers = 5
+full_fan_speed_layer = 5
+slowdown_below_layer_time = 15
+
@@ -0,0 +1,9 @@
+[filament:Fiberlogy Easy PLA]
+inherits = *PLA*
+filament_vendor = Fiberlogy
+filament_cost = 20
+filament_density = 1.24
+first_layer_temperature = 220
+temperature = 220
+filament_spool_weight = 330
+
@@ -0,0 +1,10 @@
+[filament:Fiberlogy FiberFlex 30D]
+inherits = Fiberlogy FiberFlex 40D
+filament_max_volumetric_speed = 1.2
+extrusion_multiplier = 1.15
+first_layer_temperature = 240
+temperature = 240
+min_fan_speed = 25
+max_fan_speed = 60
+filament_density = 1.07
+
@@ -0,0 +1,21 @@
+[filament:Fiberlogy FiberFlex 40D]
+inherits = *FLEX*
+filament_vendor = Fiberlogy
+fan_always_on = 1
+filament_max_volumetric_speed = 1.5
+extrusion_multiplier = 1.12
+first_layer_temperature = 230
+first_layer_bed_temperature = 60
+temperature = 230
+bed_temperature = 60
+bridge_fan_speed = 75
+min_fan_speed = 25
+max_fan_speed = 75
+filament_cost = 39.41
+filament_density = 1.16
+disable_fan_first_layers = 5
+full_fan_speed_layer = 5
+min_print_speed = 15
+cooling = 1
+filament_spool_weight = 330
+
@@ -0,0 +1,8 @@
+[filament:Fiberlogy FiberSatin]
+inherits = Fiberlogy Easy PLA
+first_layer_temperature = 215
+temperature = 215
+extrusion_multiplier = 1
+filament_density = 1.2
+filament_cost = 32.35
+
@@ -0,0 +1,8 @@
+[filament:Fiberlogy FiberSilk]
+inherits = Fiberlogy FiberSatin
+first_layer_temperature = 230
+temperature = 230
+extrusion_multiplier = 0.97
+filament_density = 1.22
+filament_cost = 32.35
+
@@ -0,0 +1,8 @@
+[filament:Fiberlogy FiberWood]
+inherits = Fiberlogy Easy PLA
+first_layer_temperature = 185
+temperature = 185
+extrusion_multiplier = 1
+filament_density = 1.23
+filament_cost = 38.66
+
@@ -0,0 +1,8 @@
+[filament:Fiberlogy HD PLA]
+inherits = Fiberlogy Easy PLA
+first_layer_temperature = 230
+temperature = 230
+extrusion_multiplier = 1
+filament_density = 1.24
+filament_cost = 30.59
+
@@ -0,0 +1,5 @@
+[filament:Fiberlogy Impact PLA]
+inherits = Fiberlogy HD PLA
+filament_density = 1.22
+filament_cost = 27.65
+
@@ -0,0 +1,8 @@
+[filament:Fiberlogy MattFlex 40D]
+inherits = Fiberlogy FiberFlex 40D
+filament_vendor = Fiberlogy
+fan_always_on = 1
+filament_max_volumetric_speed = 1.35
+extrusion_multiplier = 1.1
+filament_cost = 49.11
+
@@ -0,0 +1,15 @@
+[filament:Fiberlogy Nylon PA12+CF15]
+inherits = Fiberlogy Nylon PA12
+extrusion_multiplier = 0.97
+filament_density = 1.07
+filament_cost = 87.5
+first_layer_bed_temperature = 105
+bed_temperature = 105
+first_layer_temperature = 265
+temperature = 265
+min_fan_speed = 10
+max_fan_speed = 15
+fan_below_layer_time = 20
+bridge_fan_speed = 30
+fan_always_on = 0
+
@@ -0,0 +1,4 @@
+[filament:Fiberlogy Nylon PA12+GF15]
+inherits = Fiberlogy Nylon PA12+CF15
+filament_density = 1.13
+
@@ -0,0 +1,15 @@
+[filament:Fiberlogy Nylon PA12]
+inherits = Fiberlogy ASA
+filament_type = PA
+filament_density = 1.01
+filament_cost = 48
+first_layer_bed_temperature = 105
+bed_temperature = 105
+first_layer_temperature = 265
+temperature = 265
+min_fan_speed = 10
+max_fan_speed = 15
+fan_below_layer_time = 20
+bridge_fan_speed = 30
+fan_always_on = 0
+
@@ -0,0 +1,13 @@
+[filament:Fiberlogy PCTG]
+inherits = Fiberlogy CPE HT
+filament_cost = 29.41
+filament_density = 1.23
+extrusion_multiplier = 1
+min_fan_speed = 10
+max_fan_speed = 15
+first_layer_temperature = 265
+temperature = 265
+first_layer_bed_temperature = 90
+bed_temperature = 90
+filament_type = PCTG
+
@@ -0,0 +1,8 @@
+[filament:Fiberlogy PLA Mineral]
+inherits = Fiberlogy Easy PLA
+first_layer_temperature = 195
+temperature = 190
+extrusion_multiplier = 0.98
+filament_density = 1.38
+filament_cost = 37.64
+
@@ -0,0 +1,23 @@
+[filament:Fiberlogy PP]
+inherits = *ABS*
+filament_vendor = Fiberlogy
+filament_cost = 36.67
+filament_density = 1.05
+extrusion_multiplier = 1.05
+filament_spool_weight = 330
+fan_always_on = 1
+cooling = 1
+min_fan_speed = 0
+max_fan_speed = 25
+bridge_fan_speed = 70
+min_print_speed = 15
+slowdown_below_layer_time = 15
+first_layer_temperature = 245
+temperature = 245
+first_layer_bed_temperature = 0
+bed_temperature = 0
+filament_type = PP
+fan_below_layer_time = 100
+disable_fan_first_layers = 5
+filament_max_volumetric_speed = 5
+
@@ -0,0 +1,23 @@
+[filament:Fiberthree F3 PA Pure Pro]
+inherits = *common*
+filament_vendor = Fiberthree
+filament_cost = 200.84
+filament_density = 1.2
+bed_temperature = 90
+first_layer_bed_temperature = 90
+first_layer_temperature = 285
+temperature = 285
+bridge_fan_speed = 30
+cooling = 1
+disable_fan_first_layers = 3
+fan_always_on = 1
+fan_below_layer_time = 20
+min_print_speed = 15
+slowdown_below_layer_time = 10
+filament_colour = #DEE0E6
+filament_max_volumetric_speed = 5
+filament_soluble = 0
+filament_type = PA
+max_fan_speed = 20
+min_fan_speed = 20
+
@@ -0,0 +1,23 @@
+[filament:Fiberthree F3 PA-CF Pro]
+inherits = *common*
+filament_vendor = Fiberthree
+filament_cost = 208.1
+filament_density = 1.25
+bed_temperature = 90
+first_layer_bed_temperature = 90
+first_layer_temperature = 285
+temperature = 285
+bridge_fan_speed = 30
+cooling = 1
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+min_print_speed = 15
+slowdown_below_layer_time = 10
+filament_colour = #DEE0E6
+filament_max_volumetric_speed = 5
+filament_soluble = 0
+filament_type = PA
+max_fan_speed = 0
+min_fan_speed = 0
+
@@ -0,0 +1,9 @@
+[filament:Fiberthree F3 PA-GF Pro]
+inherits = Fiberthree F3 PA-CF Pro
+filament_vendor = Fiberthree
+filament_cost = 205.68
+filament_density = 1.27
+fan_always_on = 1
+max_fan_speed = 15
+min_fan_speed = 15
+
@@ -0,0 +1,15 @@
+[filament:Fiberthree F3 PA-GF30 Pro]
+inherits = Prusament PC Blend Carbon Fiber
+filament_vendor = Fiberthree
+filament_cost = 208.01 
+filament_density = 1.35
+extrusion_multiplier = 1.03
+first_layer_temperature = 275
+temperature = 285
+first_layer_bed_temperature = 90
+bed_temperature = 90
+fan_below_layer_time = 10
+max_fan_speed = 15
+min_fan_speed = 15
+filament_type = PA
+
@@ -0,0 +1,7 @@
+[filament:Filament PM ABS]
+inherits = *ABSC*
+filament_vendor = Filament PM
+filament_cost = 27.82
+filament_density = 1.08
+filament_spool_weight = 230
+
@@ -0,0 +1,13 @@
+[filament:Filament PM ASA]
+inherits = Fillamentum ASA
+filament_vendor = Filament PM
+filament_cost = 27.82
+filament_density = 1.07
+filament_spool_weight = 0
+first_layer_temperature = 255
+temperature = 255
+first_layer_bed_temperature = 100
+bed_temperature = 100
+min_fan_speed = 15
+max_fan_speed = 15
+
@@ -0,0 +1,9 @@
+[filament:Filament PM CFJet]
+inherits = *PET*
+filament_vendor = Filament PM
+filament_colour = #BBBBBB
+filament_cost = 27.82
+filament_density = 1.27
+first_layer_temperature = 245
+temperature = 255
+
@@ -0,0 +1,15 @@
+[filament:Filament PM FRJet]
+inherits = *PET*
+filament_vendor = Filament PM
+filament_colour = #BBBBBB
+filament_cost = 27.82
+filament_density = 1.27
+first_layer_temperature = 240
+temperature = 240
+extrusion_multiplier = 0.95
+fan_always_on = 0
+cooling = 0
+min_fan_speed = 5
+max_fan_speed = 15
+bridge_fan_speed = 15
+
@@ -0,0 +1,18 @@
+[filament:Filament PM PA-CFJet]
+inherits = *PET*
+filament_vendor = Filament PM
+filament_colour = #BBBBBB
+filament_cost = 27.82
+filament_density = 1.01
+first_layer_temperature = 245
+temperature = 245
+first_layer_bed_temperature = 100
+bed_temperature = 100
+extrusion_multiplier = 1.02
+fan_always_on = 0
+cooling = 0
+min_fan_speed = 0
+max_fan_speed = 0
+bridge_fan_speed = 0
+filament_type = PA
+
@@ -0,0 +1,18 @@
+[filament:Filament PM PAJet]
+inherits = *PET*
+filament_vendor = Filament PM
+filament_colour = #ECFAFF
+filament_cost = 27.82
+filament_density = 1.01
+first_layer_temperature = 245
+temperature = 245
+first_layer_bed_temperature = 100
+bed_temperature = 100
+extrusion_multiplier = 1.1
+fan_always_on = 0
+cooling = 0
+min_fan_speed = 0
+max_fan_speed = 0
+bridge_fan_speed = 0
+filament_type = PA
+
@@ -0,0 +1,17 @@
+[filament:Filament PM PC-ABS]
+inherits = *ABSC*
+filament_vendor = Filament PM
+filament_colour = #DEE0E6
+filament_cost = 49.90
+filament_density = 1.19
+first_layer_temperature = 275
+temperature = 275
+first_layer_bed_temperature = 100
+bed_temperature = 100
+fan_always_on = 0
+cooling = 0
+min_fan_speed = 20
+max_fan_speed = 20
+bridge_fan_speed = 30
+filament_type = PC
+
@@ -0,0 +1,7 @@
+[filament:Filament PM PETG]
+inherits = *PET*
+filament_vendor = Filament PM
+filament_cost = 27.82
+filament_density = 1.27
+filament_spool_weight = 230
+
@@ -0,0 +1,11 @@
+[filament:Filament PM PLA+]
+inherits = *PLA*
+filament_vendor = Filament PM
+filament_cost = 27.82
+filament_density = 1.25
+filament_spool_weight = 0
+min_fan_speed = 50
+max_fan_speed = 70
+fan_below_layer_time = 100
+slowdown_below_layer_time = 20
+
@@ -0,0 +1,7 @@
+[filament:Filament PM PLA]
+inherits = *PLA*
+filament_vendor = Filament PM
+filament_cost = 27.82
+filament_density = 1.24
+filament_spool_weight = 230
+
@@ -0,0 +1,20 @@
+[filament:Filament PM PPJet]
+inherits = *FLEX*
+filament_vendor = Filament PM
+filament_colour = #ECFAFF
+filament_cost = 33.99
+filament_density = 0.89
+first_layer_temperature = 235
+temperature = 230
+first_layer_bed_temperature = 100
+bed_temperature = 100
+fan_always_on = 1
+cooling = 1
+extrusion_multiplier = 1.15
+min_fan_speed = 20
+max_fan_speed = 40
+bridge_fan_speed = 80
+filament_type = PP
+disable_fan_first_layers = 3
+slowdown_below_layer_time = 20
+
@@ -0,0 +1,20 @@
+[filament:Filament PM TPE88 RubberJet]
+inherits = *FLEX*
+filament_vendor = Filament PM
+filament_cost = 33.99
+filament_density = 0.89
+first_layer_temperature = 240
+temperature = 240
+first_layer_bed_temperature = 0
+bed_temperature = 0
+fan_always_on = 1
+cooling = 0
+extrusion_multiplier = 1.14
+min_fan_speed = 10
+max_fan_speed = 10
+bridge_fan_speed = 30
+filament_type = FLEX
+disable_fan_first_layers = 3
+slowdown_below_layer_time = 20
+filament_diameter = 1.68
+
@@ -0,0 +1,17 @@
+[filament:Filamentworld ABS]
+inherits = *ABSC*
+filament_vendor = Filamentworld
+filament_cost = 24.9
+filament_density = 1.04
+temperature = 230
+bed_temperature = 95
+first_layer_temperature = 240
+first_layer_bed_temperature = 100
+max_fan_speed = 20
+min_fan_speed = 10
+min_print_speed = 20
+disable_fan_first_layers = 3
+fan_below_layer_time = 60
+slowdown_below_layer_time = 15
+bridge_fan_speed = 20
+
@@ -0,0 +1,20 @@
+[filament:Filamentworld PETG]
+inherits = *PET*
+filament_vendor = Filamentworld
+filament_cost = 34.9
+filament_density = 1.27
+bed_temperature = 70
+first_layer_bed_temperature = 85
+first_layer_temperature = 240
+temperature = 235
+fan_always_on = 1
+min_fan_speed = 25
+max_fan_speed = 55
+bridge_fan_speed = 55
+slowdown_below_layer_time = 20
+min_print_speed = 20
+fan_below_layer_time = 35
+disable_fan_first_layers = 2
+full_fan_speed_layer = 0
+filament_spool_weight = 0
+
@@ -0,0 +1,14 @@
+[filament:Filamentworld PLA]
+inherits = *PLA*
+filament_vendor = Filamentworld
+filament_cost = 24.9
+filament_density = 1.24
+temperature = 205
+bed_temperature = 55
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+full_fan_speed_layer = 3
+slowdown_below_layer_time = 10
+filament_spool_weight = 0
+min_print_speed = 20
+
@@ -0,0 +1,7 @@
+[filament:Filatech ABS]
+inherits = *ABSC*
+filament_vendor = Filatech
+filament_cost = 
+extrusion_multiplier = 1
+filament_density = 1.05
+
@@ -0,0 +1,9 @@
+[filament:Filatech FilaCarbon]
+inherits = *ABSC*
+filament_vendor = Filatech
+filament_cost = 
+extrusion_multiplier = 0.95
+filament_density = 1.1
+first_layer_bed_temperature = 100
+bed_temperature = 100
+
@@ -0,0 +1,7 @@
+[filament:Filatech FilaFlex30]
+inherits = Filatech FilaFlex40
+temperature = 225
+filament_density = 1.15
+extrusion_multiplier = 1.1
+filament_cost =
+
@@ -0,0 +1,21 @@
+[filament:Filatech FilaFlex40]
+inherits = *FLEX*
+filament_vendor = Filatech
+fan_always_on = 1
+filament_max_volumetric_speed = 2.5
+extrusion_multiplier = 1.1
+first_layer_temperature = 230
+first_layer_bed_temperature = 50
+temperature = 230
+bed_temperature = 50
+bridge_fan_speed = 100
+max_fan_speed = 50
+min_fan_speed = 50
+filament_cost = 84.68
+filament_density = 1.22
+disable_fan_first_layers = 4
+full_fan_speed_layer = 6
+min_print_speed = 15
+slowdown_below_layer_time = 10
+cooling = 1
+
@@ -0,0 +1,11 @@
+[filament:Filatech FilaFlex55]
+inherits = Filatech FilaFlex40
+temperature = 230
+filament_density = 1.18
+bed_temperature = 60
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_cost =
+first_layer_temperature = 235
+extrusion_multiplier = 1
+
@@ -0,0 +1,10 @@
+[filament:Filatech FilaPLA]
+inherits = *PLA*
+filament_vendor = Filatech
+filament_cost = 
+filament_density = 1.3
+first_layer_temperature = 235
+first_layer_bed_temperature = 50
+temperature = 230
+bed_temperature = 55
+
@@ -0,0 +1,11 @@
+[filament:Filatech FilaTough]
+inherits = Filatech ABS
+filament_cost = 
+extrusion_multiplier = 0.95
+filament_density = 1.29
+first_layer_temperature = 245
+first_layer_bed_temperature = 80
+temperature = 240
+bed_temperature = 90
+cooling = 0
+
@@ -0,0 +1,10 @@
+[filament:Filatech HIPS]
+inherits = Prusa HIPS
+filament_vendor = Filatech
+filament_density = 1.07
+filament_spool_weight = 
+first_layer_temperature = 230
+first_layer_bed_temperature = 100
+temperature = 225
+bed_temperature = 100
+
--- a/Show More
+++ b/Show More