Initial Profile Sources

2026-07-07 16:59:47 +00:00 · 2026-03-19 01:54:47 +00:00
parent 7e2e8f9d47
commit 1f7873734a
13374 changed files with 256890 additions and 0 deletions
@@ -0,0 +1,9 @@
+[filament:Devil Design PETG @DQ2 0.25 nozzle]
+renamed_from = "DeltiQ - PETG (Devil Design) @0.25 nozzle"
+inherits = Devil Design PETG @DQ2; *DQ2 0.25*
+first_layer_temperature = 225
+temperature = 220
+max_fan_speed = 65
+min_fan_speed = 40
+bridge_fan_speed = 100
+
@@ -0,0 +1,11 @@
+[filament:Devil Design PETG @DQ2 0.6 nozzle]
+renamed_from = "DeltiQ - PETG (Devil Design) @0.6 nozzle"
+inherits = Devil Design PETG @DQ2; *DQ2 0.6*
+filament_max_volumetric_speed = 15
+bridge_fan_speed = 70
+min_fan_speed = 35
+extrusion_multiplier = 1.025
+first_layer_temperature = 255
+temperature = 255
+filament_wipe = 0
+
@@ -0,0 +1,14 @@
+[filament:Devil Design PETG @DQ2 0.8 nozzle]
+renamed_from = "DeltiQ - PETG (Devil Design) @0.8 nozzle"
+inherits = Devil Design PETG @DQ2; *DQ2 0.8*
+filament_max_volumetric_speed = 40
+first_layer_temperature = 240
+slowdown_below_layer_time = 8
+temperature = 240
+filament_retract_layer_change = 0
+filament_retract_length = 4.3
+filament_retract_speed = 45
+filament_deretract_speed = 25
+filament_retract_before_wipe = 80%
+filament_wipe = 1
+
@@ -0,0 +1,8 @@
+[filament:Devil Design PETG @DQ2]
+renamed_from = "DeltiQ - PETG (Devil Design)"
+inherits = Generic PETG @DQ2; *DQ2 0.6*
+filament_vendor = DevilDesign
+filament_spool_weight = 247
+filament_density = 1.27
+filament_cost = 16.53
+
@@ -0,0 +1,8 @@
+[filament:Devil Design PETG @DQ2FP]
+renamed_from = "DeltiQ FP - PETG (Devil Design)"
+inherits = Generic PETG @DQ2FP; *DQ2FP 0.4*
+filament_cost = 16.53
+filament_spool_weight = 247
+filament_density = 1.27
+filament_vendor = DevilDesign
+
@@ -0,0 +1,10 @@
+[filament:Devil Design PETG @DQ2FP2]
+renamed_from = "DeltiQ FP2 - PETG (Devil Design)"
+inherits = Generic PETG @DQ2FP2; *DQ2FP2 0.4*
+filament_cost = 16.53
+filament_spool_weight = 247
+filament_density = 1.27
+filament_vendor = DevilDesign
+
+# DeltiQ ABS filaments #
+
@@ -0,0 +1,4 @@
+[filament:Fiberlogy Nylon PA12 @AQI 0.6 nozzle]
+renamed_from = "AzteQ Industrial - PA - Nylon PA12 (Fiberlogy) @0.6 nozzle"
+inherits = Fiberlogy Nylon PA12 @AQI; *AQI 0.6*
+
@@ -0,0 +1,42 @@
+[filament:Fiberlogy Nylon PA12 @AQI]
+renamed_from = "AzteQ Industrial - PA - Nylon PA12 (Fiberlogy)"
+inherits = *AQI 0.4*
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_cost = 45.11
+filament_spool_weight = 230
+filament_density = 1.02
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 4.1
+filament_retract_lift = 0.2
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = 25
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = Fiberlogy
+filament_wipe = 1
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+full_fan_speed_layer = 0
+max_fan_speed = 75
+min_fan_speed = 50
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Wait for chamber temperature"
+temperature = 255
+
@@ -0,0 +1,16 @@
+[filament:Fiberlogy Nylon PA12 @DQ2]
+renamed_from = "DeltiQ - PA - Nylon PA12 (Fiberlogy)"
+inherits = Generic ABS @DQ2; *DQ2 0.4*
+filament_type = PA
+filament_vendor = Fiberlogy
+bed_temperature = 100
+filament_spool_weight = 230
+filament_density = 1.02
+filament_retract_length = 4.1
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+max_fan_speed = 30
+min_fan_speed = 20
+temperature = 255
+filament_cost = 45.11
+
@@ -0,0 +1,16 @@
+[filament:Fiberlogy Nylon PA12+CF15 @DQ2 0.6 nozzle]
+inherits = Fiberlogy Nylon PA12+CF15 @DQ2; *DQ2 0.6X*
+bridge_fan_speed = 50
+max_fan_speed = 40
+min_fan_speed = 20
+fan_always_on = 1
+fan_below_layer_time = 12
+min_print_speed = 15
+slowdown_below_layer_time = 3
+extrusion_multiplier = 1.075
+first_layer_temperature = 270
+temperature = 270
+filament_retract_length = 4
+filament_retract_lift = 0.2
+filament_retract_before_wipe = 90%
+
@@ -0,0 +1,15 @@
+[filament:Fiberlogy Nylon PA12+CF15 @DQ2]
+inherits = Fiberlogy Nylon PA12 @DQ2; *DQ2 0.4X*
+filament_type = PACF
+bridge_fan_speed = 15
+min_fan_speed = 5
+fan_always_on = 0
+fan_below_layer_time = 11
+slowdown_below_layer_time = 10
+extrusion_multiplier = 0.97
+first_layer_temperature = 260
+temperature = 260
+filament_retract_length = 4.15
+filament_retract_lift = 0.25
+filament_cost = 133.82
+
@@ -0,0 +1,16 @@
+[filament:Fiberlogy Nylon PA12+GF15 @DQ2 0.6 nozzle]
+inherits = Fiberlogy Nylon PA12+GF15 @DQ2; *DQ2 0.6X*
+bridge_fan_speed = 50
+max_fan_speed = 40
+min_fan_speed = 20
+fan_always_on = 1
+fan_below_layer_time = 12
+min_print_speed = 15
+slowdown_below_layer_time = 3
+extrusion_multiplier = 1.075
+first_layer_temperature = 270
+temperature = 270
+filament_retract_length = 4
+filament_retract_lift = 0.2
+filament_retract_before_wipe = 90%
+
@@ -0,0 +1,15 @@
+[filament:Fiberlogy Nylon PA12+GF15 @DQ2]
+inherits = Fiberlogy Nylon PA12 @DQ2; *DQ2 0.4X*
+filament_type = PAGF
+bridge_fan_speed = 15
+min_fan_speed = 5
+fan_always_on = 0
+fan_below_layer_time = 11
+slowdown_below_layer_time = 10
+extrusion_multiplier = 0.97
+first_layer_temperature = 260
+temperature = 260
+filament_retract_length = 4.15
+filament_retract_lift = 0.25
+filament_cost = 113.82
+
@@ -0,0 +1,22 @@
+[filament:Fiberlogy PP @DQ2FP2]
+inherits = Generic PLA @DQ2FP2; *DQ2FP2 0.4*
+filament_type = PP
+filament_vendor = Fiberlogy
+filament_density = 1.04
+first_layer_bed_temperature = 0
+bed_temperature = 0
+first_layer_temperature = 230
+temperature = 230
+extrusion_multiplier = 0.91
+bridge_fan_speed = 75
+disable_fan_first_layers = 5
+max_fan_speed = 50
+min_fan_speed = 15
+fan_below_layer_time = 20
+min_print_speed = 15
+slowdown_below_layer_time = 2
+filament_retract_length = 0.8
+filament_cost = 54.36
+
+# DeltiQ PETG filaments #
+
@@ -0,0 +1,18 @@
+[filament:Filament PM PAJet 160 @AQI]
+inherits = Generic ABS @AQI; *AQI 0.4X*
+filament_type = PA
+filament_vendor = Filament PM
+bridge_fan_speed = 80
+max_fan_speed = 50
+min_fan_speed = 20
+min_print_speed = 15
+slowdown_below_layer_time = 2
+extrusion_multiplier = 0.9
+first_layer_temperature = 245
+temperature = 245
+filament_retract_before_wipe = 100%
+filament_retract_length = 6
+filament_retract_speed = 30
+filament_wipe = 0
+filament_cost = 79.08
+
@@ -0,0 +1,4 @@
+[filament:Fillamentum ABS @AQI 0.6 nozzle]
+renamed_from = "AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.6 nozzle"
+inherits = Fillamentum ABS @AQI; *AQI 0.6*
+
@@ -0,0 +1,5 @@
+[filament:Fillamentum ABS @AQI 0.8 nozzle]
+renamed_from = "AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.8 nozzle"
+inherits = Fillamentum ABS @AQI; *AQI 0.8*
+extrusion_multiplier = 0.95
+
@@ -0,0 +1,8 @@
+[filament:Fillamentum ABS @AQI]
+renamed_from = "AzteQ Industrial - ABS - ExtraFill (Fillamentum)"
+inherits = Generic ABS @AQI; *AQI 0.4*
+filament_vendor = Fillamentum
+filament_cost = 24.27
+filament_density = 1.04
+filament_spool_weight = 229
+
@@ -0,0 +1,4 @@
+[filament:Fillamentum ABS @DQ2 0.6 nozzle]
+renamed_from = "DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle"
+inherits = Fillamentum ABS @DQ2; *DQ2 0.6*
+
@@ -0,0 +1,8 @@
+[filament:Fillamentum ABS @DQ2]
+renamed_from = "DeltiQ - ABS - ExtraFill (Fillamentum)"
+inherits = Generic ABS @DQ2; *DQ2 0.4*
+filament_cost = 24.27
+filament_spool_weight = 229
+filament_density = 1.04
+filament_vendor = Fillamentum
+
@@ -0,0 +1,8 @@
+[filament:Fillamentum ABS @DQ2FP]
+renamed_from = "DeltiQ FP - ABS - ExtraFill (Fillamentum)"
+inherits = Generic ABS @DQ2FP; *DQ2FP 0.4*
+filament_cost = 24.27
+filament_spool_weight = 229
+filament_density = 1.04
+filament_vendor = Fillamentum
+
@@ -0,0 +1,11 @@
+[filament:Fillamentum ABS @DQ2FP2]
+renamed_from = "DeltiQ FP2 - ABS - ExtraFill (Fillamentum)"
+inherits = Generic ABS @DQ2FP2; *DQ2FP2 0.4*
+filament_cost = 24.27
+filament_spool_weight = 229
+filament_density = 1.04
+filament_vendor = Fillamentum
+
+
+# DeltiQ ASA filaments #
+
@@ -0,0 +1,4 @@
+[filament:Fillamentum ASA @AQI 0.6 nozzle]
+renamed_from = "AzteQ Industrial - ASA - ExtraFill (Fillamentum) @0.6 nozzle"
+inherits = Fillamentum ASA @AQI; *AQI 0.6*
+
@@ -0,0 +1,14 @@
+[filament:Fillamentum ASA @AQI 0.8 nozzle]
+renamed_from = "AzteQ Industrial - ASA - ExtraFill (Fillamentum) @0.8 nozzle"
+inherits = Fillamentum ASA @AQI; *AQI 0.8*
+first_layer_bed_temperature = 100
+bed_temperature = 100
+first_layer_temperature = 250
+temperature = 250
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Wait for chamber temperature"
+max_fan_speed = 100
+min_fan_speed = 80
+filament_retract_length = 6.1
+filament_max_volumetric_speed = 0
+
+
@@ -0,0 +1,12 @@
+[filament:Fillamentum ASA @AQI]
+renamed_from = "AzteQ Industrial - ASA - ExtraFill (Fillamentum)"
+inherits = Generic ASA @AQI; *AQI 0.4*
+filament_vendor = Fillamentum
+first_layer_temperature = 255
+temperature = 255
+max_fan_speed = 80
+min_fan_speed = 60
+filament_spool_weight = 229
+filament_cost = 29.53
+filament_density = 1.07
+
@@ -0,0 +1,4 @@
+[filament:Fillamentum ASA @DQ2 0.6 nozzle]
+renamed_from = "DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle"
+inherits = Fillamentum ASA @DQ2; *DQ2 0.6*
+
@@ -0,0 +1,11 @@
+[filament:Fillamentum ASA @DQ2]
+renamed_from = "DeltiQ - ASA - ExtraFill (Fillamentum)"
+inherits = Generic ABS @DQ2; *DQ2 0.4*
+filament_cost = 29.53
+filament_spool_weight = 229
+filament_density = 1.07
+filament_type = ASA
+filament_vendor = Fillamentum
+first_layer_temperature = 265
+temperature = 265
+
@@ -0,0 +1,6 @@
+[filament:Fillamentum ASA @DQ2FP]
+renamed_from = "DeltiQ FP - ASA - ExtraFill (Fillamentum)"
+inherits = Fillamentum ASA @DQ2; *DQ2FP2 0.4*
+filament_retract_length = 0.7
+filament_retract_speed = 25
+
@@ -0,0 +1,4 @@
+[filament:Fillamentum ASA @DQ2FP2]
+renamed_from = "DeltiQ FP2 - ASA - ExtraFill (Fillamentum)"
+inherits = Fillamentum ASA @DQ2FP; *DQ2FP2 0.4*
+
@@ -0,0 +1,4 @@
+[filament:Fillamentum CPE HG100 @DQ2 0.6 nozzle]
+renamed_from = "DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle"
+inherits = Fillamentum CPE HG100 @DQ2; *DQ2 0.6*
+
@@ -0,0 +1,30 @@
+[filament:Fillamentum CPE HG100 @DQ2]
+renamed_from = "DeltiQ - CPE - HG100 (Fillamentum)"
+inherits = *DQ2 0.4* 
+bed_temperature = 90
+bridge_fan_speed = 50
+cooling = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_vendor = Fillamentum
+filament_cost = 39.07
+filament_spool_weight = 229
+filament_density = 1.25
+filament_deretract_speed = 25
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 2
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 0
+filament_retract_length = 4.3
+filament_retract_lift = 0.2
+filament_retract_speed = 45
+filament_type = CPE
+filament_wipe = 1
+first_layer_bed_temperature = 90
+first_layer_temperature = 265
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 10
+slowdown_below_layer_time = 5
+temperature = 260
+
@@ -0,0 +1,8 @@
+[filament:Fillamentum CPE HG100 @DQ2FP]
+renamed_from = "DeltiQ FP - CPE - HG100 (Fillamentum)"
+inherits = Fillamentum CPE HG100 @DQ2; *DQ2FP 0.4*
+filament_retract_length = 0.7
+filament_retract_speed = 25
+filament_deretract_speed = 0
+filament_retract_before_wipe = 0%
+
@@ -0,0 +1,11 @@
+[filament:Fillamentum CPE HG100 @DQ2FP2]
+renamed_from = "DeltiQ FP2 - CPE - HG100 (Fillamentum)"
+inherits = Fillamentum CPE HG100 @DQ2FP; *DQ2FP2 0.4*
+filament_retract_length = 0.8
+filament_retract_speed = 35
+filament_deretract_speed = 0
+filament_retract_before_wipe = 0%
+
+
+# DeltiQ FLEX filaments #
+
@@ -0,0 +1,16 @@
+[filament:Fillamentum Nylon CF15 @DQ2]
+renamed_from = "DeltiQ - PA - Nylon CF15 Carbon (Fillamentum)"
+inherits = Generic ABS @DQ2; *DQ2 0.4X*
+filament_type = PACF
+bed_temperature = 100
+filament_cost = 88.17
+filament_density = 1.08
+filament_spool_weight = 229
+filament_retract_length = 2.0
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+max_fan_speed = 50
+min_fan_speed = 20
+temperature = 255
+extrusion_multiplier = 0.95
+
@@ -0,0 +1,4 @@
+[filament:Fillamentum Nylon FX256 @AQI 0.6 nozzle]
+renamed_from = "AzteQ Industrial - PA - Nylon FX256 (Fillamentum) @0.6 nozzle"
+inherits = Fillamentum Nylon FX256 @AQI; *AQI 0.6*
+
@@ -0,0 +1,42 @@
+[filament:Fillamentum Nylon FX256 @AQI]
+renamed_from = "AzteQ Industrial - PA - Nylon FX256 (Fillamentum)"
+inherits = *AQI 0.4*
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_cost = 57.32
+filament_spool_weight = 229
+filament_density = 1.01
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 6.1
+filament_retract_lift = 0.2
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = 25
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = Fillamentum
+filament_wipe = 1
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+full_fan_speed_layer = 0
+max_fan_speed = 85
+min_fan_speed = 50
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S60 ; Wait for chamber temperature"
+temperature = 255
+
@@ -0,0 +1,4 @@
+[filament:Fillamentum PC/ABS @AQI 0.6 nozzle]
+renamed_from = "AzteQ Industrial - PC/ABS - (Fillamentum) @0.6 nozzle"
+inherits = Fillamentum PC/ABS @AQI; *AQI 0.6*
+
@@ -0,0 +1,17 @@
+[filament:Fillamentum PC/ABS @AQI]
+renamed_from = "AzteQ Industrial - PC/ABS - (Fillamentum)"
+inherits = Generic ABS @AQI; *AQI 0.4*
+filament_vendor = Fillamentum
+filament_type = PCABS
+filament_cost = 53.71
+filament_spool_weight = 229
+filament_density = 1.07
+bed_temperature = 100
+filament_retract_length = 4.0
+first_layer_bed_temperature = 100
+first_layer_temperature = 265
+max_fan_speed = 50
+min_fan_speed = 50
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Wait for chamber temperature"
+temperature = 265
+
@@ -0,0 +1,19 @@
+[filament:Fillamentum PEBA 90A @DQ2FP2]
+renamed_from = "DeltiQ FP2 - PEBA 90A - FlexFill (Fillamentum)"
+inherits = Fillamentum TPU 98A @DQ2FP2; *DQ2FP2 0.4*
+extrusion_multiplier = 1.1
+filament_cost = 139.67
+filament_spool_weight = 229
+filament_density = 1.00
+filament_max_volumetric_speed = 2.9
+filament_retract_length = 0.0
+filament_type = PEBA90A
+bridge_fan_speed = 100
+max_fan_speed = 50
+min_fan_speed = 50
+disable_fan_first_layers = 2
+first_layer_bed_temperature = 75
+first_layer_temperature = 245
+bed_temperature = 75
+temperature = 245
+
@@ -0,0 +1,4 @@
+[filament:Fillamentum PLA (Door Opened) @AQI 0.6 nozzle]
+renamed_from = "AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum) @0.6 nozzle"
+inherits = Fillamentum PLA (Door Opened) @AQI; *AQI 0.6*
+
@@ -0,0 +1,8 @@
+[filament:Fillamentum PLA (Door Opened) @AQI]
+renamed_from = "AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum)"
+inherits = Generic PLA (Door Opened) @AQI; *AQI 0.4* 
+filament_vendor = Fillamentum
+filament_cost = 24.27
+filament_density = 1.24
+filament_spool_weight = 229
+
@@ -0,0 +1,4 @@
+[filament:Fillamentum PLA (PLA Printhead) @AQI 0.6 nozzle]
+renamed_from = "AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum) @0.6 nozzle"
+inherits = Fillamentum PLA (PLA Printhead) @AQI; *AQI 0.6* 
+
@@ -0,0 +1,39 @@
+[filament:Fillamentum PLA (PLA Printhead) @AQI]
+renamed_from = "AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum)"
+inherits = *AQI 0.4* 
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_cost = 24.27
+filament_density = 1.24
+filament_spool_weight = 229
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 6
+filament_retract_lift = 0.2
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = 25
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_vendor = Fillamentum
+filament_wipe = 1
+first_layer_bed_temperature = 50
+first_layer_temperature = 220
+full_fan_speed_layer = 0
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Wait for chamber temperature"
+temperature = 215
+
@@ -0,0 +1,4 @@
+[filament:Fillamentum PLA @DQ2 0.25 nozzle]
+renamed_from = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle"
+inherits = Fillamentum PLA @DQ2; *DQ2 0.25*
+
@@ -0,0 +1,5 @@
+[filament:Fillamentum PLA @DQ2 0.6 nozzle]
+renamed_from = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle"
+inherits = Fillamentum PLA @DQ2; *DQ2 0.6*
+filament_max_volumetric_speed = 15
+
@@ -0,0 +1,13 @@
+[filament:Fillamentum PLA @DQ2 0.8 nozzle]
+renamed_from = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle"
+inherits = Fillamentum PLA @DQ2; *DQ2 0.8*
+disable_fan_first_layers = 1
+filament_max_volumetric_speed = 40
+first_layer_temperature = 230
+slowdown_below_layer_time = 8
+temperature = 230
+filament_retract_layer_change = 0
+filament_retract_length = 4.1
+filament_retract_speed = 45
+filament_deretract_speed = 25
+
@@ -0,0 +1,8 @@
+[filament:Fillamentum PLA @DQ2]
+renamed_from = "DeltiQ - PLA - ExtraFill (Fillamentum)"
+inherits = Generic PLA @DQ2; *DQ2 0.4*
+filament_cost = 24.27
+filament_spool_weight = 229
+filament_density = 1.24
+filament_vendor = Fillamentum
+
@@ -0,0 +1,8 @@
+[filament:Fillamentum PLA @DQ2FP]
+renamed_from = "DeltiQ FP - PLA - ExtraFill (Fillamentum)"
+inherits = Generic PLA @DQ2; *DQ2FP 0.4*
+filament_cost = 24.27
+filament_spool_weight = 229
+filament_density = 1.24
+filament_vendor = Fillamentum
+
@@ -0,0 +1,9 @@
+[filament:Fillamentum PLA @DQ2FP2]
+renamed_from = "DeltiQ FP2 - PLA - ExtraFill (Fillamentum)"
+inherits = Generic PLA @DQ2FP2; *DQ2FP2 0.4*
+filament_cost = 24.27
+filament_spool_weight = 229
+filament_density = 1.24
+filament_vendor = Fillamentum
+
+
@@ -0,0 +1,33 @@
+[filament:Fillamentum TPU 92A @DQ2FP2]
+renamed_from = "DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum)"
+inherits = Generic FLEX @DQ2FP2; *DQ2FP2 0.4*
+bed_temperature = 50
+bridge_fan_speed = 80
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1.10
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_vendor = Fillamentum
+filament_cost = 58.33
+filament_spool_weight = 229
+filament_density = 1.22
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 3.0
+filament_retract_before_travel = 2
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 0
+filament_retract_length = 2.5
+filament_retract_lift = 0.2
+filament_retract_restart_extra = nil
+filament_retract_speed = 20
+filament_type = TPU92A
+filament_wipe = 1
+first_layer_bed_temperature = 50
+first_layer_temperature = 230
+max_fan_speed = 70
+min_fan_speed = 50
+min_print_speed = 5
+slowdown_below_layer_time = 4
+temperature = 230
+
@@ -0,0 +1,14 @@
+[filament:Fillamentum TPU 98A @DQ2FP2]
+renamed_from = "DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum)"
+inherits = Fillamentum TPU 92A @DQ2FP2; *DQ2FP2 0.4*
+extrusion_multiplier = 1.10
+filament_cost = 58.33
+filament_spool_weight = 229
+filament_density = 1.23
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 3.0
+filament_retract_before_wipe = 70%
+filament_retract_length = 2.5
+filament_retract_speed = 20
+filament_type = TPU98A
+
@@ -0,0 +1,4 @@
+[filament:Generic ABS @AQI 0.6 nozzle]
+renamed_from = "AzteQ Industrial - ABS - Generic @0.6 nozzle"
+inherits = Generic ABS @AQI; *AQI 0.6*
+
@@ -0,0 +1,13 @@
+[filament:Generic ABS @AQI 0.8 nozzle]
+renamed_from = "AzteQ Industrial - ABS - Generic @0.8 nozzle"
+inherits = Generic ABS @AQI; *AQI 0.8*
+first_layer_temperature = 255
+first_layer_bed_temperature = 100
+temperature = 255
+bed_temperature = 100
+max_fan_speed = 80
+min_fan_speed = 50
+filament_retract_length = 6.1
+filament_max_volumetric_speed = 0
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Wait for chamber temperature"
+
@@ -0,0 +1,39 @@
+[filament:Generic ABS @AQI]
+renamed_from = "AzteQ Industrial - ABS - Generic"
+inherits = *AQI 0.4*
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_density = 1.04
+filament_deretract_speed = nil
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 4.1
+filament_retract_lift = 0.2
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = 25
+filament_soluble = 0
+filament_spool_weight = 0
+filament_type = ABS
+filament_wipe = 1
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+full_fan_speed_layer = 0
+max_fan_speed = 100
+min_fan_speed = 80
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Wait for chamber temperature"
+temperature = 255
+
@@ -0,0 +1,26 @@
+[filament:Generic ABS @DQ2]
+renamed_from = "DeltiQ - ABS - Generic"
+inherits = *DQ2 0.4*
+bed_temperature = 100
+bridge_fan_speed = 25
+cooling = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_density = 1.04
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 4.1
+filament_retract_lift = 0.2
+filament_retract_speed = 25
+filament_type = ABS
+filament_wipe = 1
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+max_fan_speed = 15
+min_fan_speed = 5
+min_print_speed = 10
+slowdown_below_layer_time = 15
+temperature = 255
+
@@ -0,0 +1,6 @@
+[filament:Generic ABS @DQ2FP]
+renamed_from = "DeltiQ FP - ABS - Generic"
+inherits = Generic ABS @DQ2; *DQ2FP 0.4*
+filament_retract_length = 0.7
+filament_retract_speed = 25
+
@@ -0,0 +1,6 @@
+[filament:Generic ABS @DQ2FP2]
+renamed_from = "DeltiQ FP2 - ABS - Generic"
+inherits = Generic ABS @DQ2FP; *DQ2FP2 0.4*
+filament_retract_length = 0.8
+filament_retract_speed = 25
+
@@ -0,0 +1,4 @@
+[filament:Generic ASA @AQI 0.6 nozzle]
+renamed_from = "AzteQ Industrial - ASA - Generic @0.6 nozzle"
+inherits = Generic ASA @AQI; *AQI 0.6*
+
@@ -0,0 +1,36 @@
+[filament:Generic ASA @AQI]
+renamed_from = "AzteQ Industrial - ASA - Generic"
+inherits = *AQI 0.4*
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_density = 1.07
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 4.1
+filament_retract_lift = 0.2
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = 25
+filament_soluble = 0
+filament_spool_weight = 0
+filament_type = ASA
+filament_wipe = 1
+first_layer_bed_temperature = 100
+first_layer_temperature = 265
+full_fan_speed_layer = 0
+max_fan_speed = 75
+min_fan_speed = 50
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Wait for chamber temperature"
+temperature = 265
+
@@ -0,0 +1,30 @@
+[filament:Generic FLEX @DQ2FP]
+renamed_from = "DeltiQ FP - FLEX - Generic"
+inherits = *DQ2FP2 0.4*
+bed_temperature = 50
+bridge_fan_speed = 80
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1.07
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_density = 1.22
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 3.0
+filament_retract_before_travel = 2
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 0
+filament_retract_length = 2.5
+filament_retract_lift = 0.2
+filament_retract_restart_extra = nil
+filament_retract_speed = 20
+filament_type = FLEX
+filament_wipe = 1
+first_layer_bed_temperature = 50
+first_layer_temperature = 240
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 4
+temperature = 240
+
@@ -0,0 +1,30 @@
+[filament:Generic FLEX @DQ2FP2]
+renamed_from = "DeltiQ FP2 - FLEX - Generic"
+inherits = Generic FLEX @DQ2FP; *DQ2FP2 0.4*
+bed_temperature = 50
+bridge_fan_speed = 80
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1.07
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_density = 1.22
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 3.0
+filament_retract_before_travel = 2
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 0
+filament_retract_length = 2.5
+filament_retract_lift = 0.2
+filament_retract_restart_extra = nil
+filament_retract_speed = 20
+filament_type = FLEX
+filament_wipe = 1
+first_layer_bed_temperature = 50
+first_layer_temperature = 225
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 4
+temperature = 225
+
@@ -0,0 +1,27 @@
+[filament:Generic PETG @DQ2]
+renamed_from = "DeltiQ - PETG - Generic"
+inherits = *DQ2 0.4* 
+bed_temperature = 80
+bridge_fan_speed = 50
+cooling = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_density = 1.27
+filament_deretract_speed = 25
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 2
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 4.1
+filament_retract_lift = 0.2
+filament_retract_speed = 45
+filament_type = PET
+filament_wipe = 1
+first_layer_bed_temperature = 80
+first_layer_temperature = 240
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 10
+slowdown_below_layer_time = 5
+temperature = 245
+
@@ -0,0 +1,6 @@
+[filament:Generic PETG @DQ2FP]
+renamed_from = "DeltiQ FP - PETG - Generic"
+inherits = Generic PETG @DQ2; *DQ2FP 0.4*
+filament_retract_length = 0.7
+filament_retract_speed = 25
+
@@ -0,0 +1,7 @@
+[filament:Generic PETG @DQ2FP2]
+renamed_from = "DeltiQ FP2 - PETG - Generic"
+inherits = Generic PETG @DQ2FP; *DQ2FP 0.4*
+filament_retract_length = 1.4
+filament_retract_speed = 35
+filament_retract_before_wipe = 0%
+
@@ -0,0 +1,4 @@
+[filament:Generic PLA (Door Opened) @AQI 0.6 nozzle]
+renamed_from = "AzteQ Industrial (Door Opened) - PLA - Generic @0.6 nozzle"
+inherits = Generic PLA (Door Opened) @AQI; *AQI 0.6*
+
@@ -0,0 +1,38 @@
+[filament:Generic PLA (Door Opened) @AQI]
+renamed_from = "AzteQ Industrial (Door Opened) - PLA - Generic"
+inherits = *AQI 0.4* 
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_density = 1.24
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 4.1
+filament_retract_lift = 0.2
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = 25
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_vendor = Generic
+filament_wipe = 1
+first_layer_bed_temperature = 50
+first_layer_temperature = 215
+full_fan_speed_layer = 0
+max_fan_speed = 100
+min_fan_speed = 90
+min_print_speed = 10
+slowdown_below_layer_time = 15
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Wait for chamber temperature"
+temperature = 210
+
@@ -0,0 +1,26 @@
+[filament:Generic PLA @DQ2]
+renamed_from = "DeltiQ - PLA - Generic"
+inherits = *DQ2 0.4* 
+bed_temperature = 55
+bridge_fan_speed = 100
+cooling = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_density = 1.24
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 2
+filament_retract_before_wipe = 90%
+filament_retract_layer_change = 1
+filament_retract_length = 4.0
+filament_retract_lift = 0.2
+filament_retract_speed = 30
+filament_type = PLA
+filament_wipe = 1
+first_layer_bed_temperature = 55
+first_layer_temperature = 220
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 10
+slowdown_below_layer_time = 4
+temperature = 215
+
@@ -0,0 +1,6 @@
+[filament:Generic PLA @DQ2FP]
+renamed_from = "DeltiQ FP - PLA - Generic"
+inherits = Generic PLA @DQ2; *DQ2FP 0.4*
+filament_retract_length = 0.7
+filament_retract_speed = 28
+
@@ -0,0 +1,6 @@
+[filament:Generic PLA @DQ2FP2]
+renamed_from = "DeltiQ FP2 - PLA - Generic"
+inherits = Generic PLA @DQ2FP; *DQ2FP2 0.4*
+filament_retract_length = 1.2
+filament_retract_speed = 28
+
@@ -0,0 +1,20 @@
+[filament:NinjaTek TPU 75D @DQ2FP2]
+inherits = Generic FLEX @DQ2FP2; *DQ2FP2 0.4*
+filament_vendor = NinjaTek
+filament_type = TPU75D
+first_layer_bed_temperature = 55
+bed_temperature = 55
+first_layer_temperature = 240
+temperature = 240
+extrusion_multiplier = 0.9
+filament_density = 1.1
+bridge_fan_speed = 90
+max_fan_speed = 70
+min_fan_speed = 50
+min_print_speed = 15
+slowdown_below_layer_time = 2
+filament_max_volumetric_speed = 5
+filament_retract_before_wipe = 95%
+filament_retract_length = 1.4
+filament_cost = 91.67
+
@@ -0,0 +1,4 @@
+[filament:Polymaker PC @AQI 0.6 nozzle]
+renamed_from = "AzteQ Industrial - PC - PolyMax (Polymaker) @0.6 nozzle"
+inherits = Polymaker PC @AQI; *AQI 0.6*
+
@@ -0,0 +1,17 @@
+[filament:Polymaker PC @AQI]
+renamed_from = "AzteQ Industrial - PC - PolyMax (Polymaker)"
+inherits = Generic ABS @AQI; *AQI 0.4*
+filament_vendor = Polymaker
+filament_type = PC
+filament_spool_weight = 230
+filament_cost = 52.40
+filament_density = 1.21
+bed_temperature = 100
+filament_retract_length = 4.0
+first_layer_bed_temperature = 100
+first_layer_temperature = 265
+max_fan_speed = 50
+min_fan_speed = 50
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Wait for chamber temperature"
+temperature = 265
+
@@ -0,0 +1,8 @@
+[filament:Prusa EasyABS @AQD]
+inherits = Prusa EasyABS @AQI; *AQD 0.4*
+min_fan_speed = 30
+min_print_speed = 15
+extrusion_multiplier = 0.925
+filament_retract_length = 4.2
+filament_retract_before_wipe = 80%
+
@@ -0,0 +1,18 @@
+[filament:Prusa EasyABS @AQI]
+inherits = Generic ABS @AQI; *AQI 0.4*
+filament_type = ABST
+bridge_fan_speed = 90
+max_fan_speed = 80
+min_fan_speed = 50
+fan_below_layer_time = 15
+slowdown_below_layer_time = 3
+extrusion_multiplier = 0.96
+filament_spool_weight = 230
+first_layer_temperature = 250
+temperature = 250
+filament_max_volumetric_speed = 10
+filament_retract_length = 4.7
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Wait for chamber temperature"
+filament_vendor = Prusa
+filament_cost = 22.31
+
@@ -0,0 +1,8 @@
+[filament:Prusament ASA @AQD]
+inherits = Prusament ASA @AQI; *AQD 0.4*
+extrusion_multiplier = 0.925
+first_layer_temperature = 250
+temperature = 250
+filament_retract_length = 2.7
+min_fan_speed = 20
+
@@ -0,0 +1,4 @@
+[filament:Prusament ASA @AQI 0.6 nozzle]
+renamed_from = "AzteQ Industrial - ASA - Prusament (Prusa Polymers) @0.6 nozzle"
+inherits = Prusament ASA @AQI; *AQI 0.6*
+
@@ -0,0 +1,13 @@
+[filament:Prusament ASA @AQI 0.8 nozzle]
+renamed_from = "AzteQ Industrial - ASA - Prusament (Prusa Polymers) @0.8 nozzle"
+inherits = Prusament ASA @AQI; *AQI 0.8*
+first_layer_bed_temperature = 100
+bed_temperature = 100
+first_layer_temperature = 250
+temperature = 250
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Wait for chamber temperature"
+max_fan_speed = 80
+min_fan_speed = 50
+filament_retract_length = 4.1
+filament_max_volumetric_speed = 0
+
@@ -0,0 +1,13 @@
+[filament:Prusament ASA @AQI]
+renamed_from = "AzteQ Industrial - ASA - Prusament (Prusa Polymers)"
+inherits = Generic ASA @AQI; *AQI 0.4*
+filament_cost = 29.16
+filament_density = 1.07
+filament_spool_weight = 201
+filament_vendor = Prusa Polymers
+first_layer_temperature = 260
+max_fan_speed = 70
+min_fan_speed = 70
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Wait for chamber temperature"
+temperature = 260
+
@@ -0,0 +1,17 @@
+[filament:Prusament PA11 Carbon Fiber @AQI]
+inherits = Prusament PA11 Carbon Fiber @DQ2; *AQI 0.4X*
+bridge_fan_speed = 30
+disable_fan_first_layers = 3
+max_fan_speed = 25
+min_fan_speed = 5
+fan_always_on = 1
+slowdown_below_layer_time = 2
+extrusion_multiplier = 1.05
+first_layer_temperature = 265
+temperature = 265
+filament_max_volumetric_speed = 8
+filament_retract_before_wipe = 100%
+filament_retract_length = 2.9
+filament_retract_speed = 30
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Wait for chamber temperature"
+
@@ -0,0 +1,22 @@
+[filament:Prusament PA11 Carbon Fiber @DQ2]
+renamed_from = "DeltiQ - PA - PA11 Carbon Fiber (Prusa Polymers)"
+inherits = Generic ABS @DQ2; *DQ2 0.4X*
+filament_type = PACF
+bridge_fan_speed = 50
+disable_fan_first_layers = 5
+max_fan_speed = 50
+min_fan_speed = 0
+fan_always_on = 0
+fan_below_layer_time = 10
+min_print_speed = 15
+slowdown_below_layer_time = 5
+extrusion_multiplier = 1.02
+filament_cost = 82.64
+filament_density = 1.08
+filament_spool_weight = 201
+first_layer_temperature = 275
+temperature = 275
+filament_max_volumetric_speed = 6
+filament_vendor = Prusa Polymers
+filament_retract_length = 2.5
+
@@ -0,0 +1,4 @@
+[filament:Prusament PC Blend @AQI 0.6 nozzle]
+renamed_from = "AzteQ Industrial - PC Blend - Prusament (Prusa Polymers) @0.6 nozzle"
+inherits = Prusament PC Blend @AQI; *AQI 0.6*
+
@@ -0,0 +1,16 @@
+[filament:Prusament PC Blend @AQI 0.8 nozzle]
+renamed_from = "AzteQ Industrial - PC Blend - Prusament (Prusa Polymers) @0.8 nozzle"
+inherits = Prusament PC Blend @AQI; *AQI 0.8*
+first_layer_bed_temperature = 100
+bed_temperature = 100
+first_layer_temperature = 275
+temperature = 275
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Wait for chamber temperature"
+max_fan_speed = 60
+min_fan_speed = 60
+filament_retract_length = 7.1
+filament_max_volumetric_speed = 0
+
+           
+# DeltiQ Printer #
+
@@ -0,0 +1,38 @@
+[filament:Prusament PC Blend @AQI]
+renamed_from = "AzteQ Industrial - PC Blend - Prusament (Prusa Polymers)"
+inherits = *AQI 0.4*
+bed_temperature = 100
+bridge_fan_speed = 75
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_cost = 61.98
+filament_density = 1.22
+filament_spool_weight = 201
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 4.1
+filament_retract_lift = 0.2
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = 25
+filament_soluble = 0
+filament_type = PC
+filament_vendor = Prusa Polymers
+filament_wipe = 1
+first_layer_bed_temperature = 100
+first_layer_temperature = 270
+full_fan_speed_layer = 0
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Wait for chamber temperature"
+temperature = 270
+
@@ -0,0 +1,18 @@
+[filament:Prusament PC Blend Carbon Fiber @DQ2 0.6 nozzle]
+inherits = Prusament PC Blend Carbon Fiber @DQ2; *DQ2 0.6X*
+bridge_fan_speed = 75
+disable_fan_first_layers = 3
+max_fan_speed = 65
+min_fan_speed = 10
+fan_always_on = 1
+fan_below_layer_time = 12
+min_print_speed = 15
+slowdown_below_layer_time = 4
+extrusion_multiplier = 1.075
+first_layer_temperature = 285
+temperature = 285
+filament_max_volumetric_speed = 12
+filament_retract_before_wipe = 90%
+filament_retract_length = 4
+filament_retract_speed = 25
+
@@ -0,0 +1,19 @@
+[filament:Prusament PC Blend Carbon Fiber @DQ2]
+renamed_from = "DeltiQ - PC - PC Blend Carbon Fiber (Prusa Polymers)"
+inherits = Generic ABS @DQ2; *DQ2 0.4X*
+filament_type = PCCF
+filament_vendor = Prusa Polymers
+bridge_fan_speed = 30
+disable_fan_first_layers = 4
+max_fan_speed = 20
+min_fan_speed = 20
+fan_always_on = 0
+extrusion_multiplier = 1.04
+filament_density = 1.08
+filament_spool_weight = 201
+first_layer_temperature = 280
+temperature = 280
+filament_retract_length = 4.3
+filament_retract_speed = 30
+filament_cost = 49.58
+
@@ -0,0 +1,3 @@
+[filament:Prusament PETG @AQD]
+inherits = Prusament PETG @AQI; *AQD 0.4*
+
@@ -0,0 +1,14 @@
+[filament:Prusament PETG @AQI]
+inherits = Prusament PETG @DQ2; *AQI 0.4*
+bridge_fan_speed = 100
+max_fan_speed = 80
+min_fan_speed = 15
+min_print_speed = 15
+slowdown_below_layer_time = 3
+first_layer_temperature = 250
+temperature = 250
+filament_retract_before_travel = 2.5
+filament_retract_before_wipe = 100%
+filament_retract_length = 4
+filament_retract_speed = 30
+
--- a/Show More
+++ b/Show More