mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-07 16:59:47 +00:00
Initial Profile Sources
This commit is contained in:
Dark98
@@ -0,0 +1,8 @@
|
||||
[printer:AzteQ Dynamic]
|
||||
inherits = *AQD*
|
||||
printer_model = AQD
|
||||
printer_variant = 0.4
|
||||
max_print_height = 400
|
||||
default_filament_profile = "Prusament ASA @AQI"
|
||||
default_print_profile = 0.20mm Normal @AQ
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:AzteQ Industrial - 0.6 nozzle]
|
||||
inherits = AzteQ Industrial
|
||||
printer_variant = 0.6
|
||||
max_layer_height = 0.4
|
||||
min_layer_height = 0.2
|
||||
nozzle_diameter = 0.6
|
||||
default_filament_profile = "Prusament ASA @AQI 0.6 nozzle"
|
||||
default_print_profile = 0.30mm Normal @AQ 0.6 nozzle
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:AzteQ Industrial - 0.8 nozzle]
|
||||
inherits = AzteQ Industrial
|
||||
printer_variant = 0.8
|
||||
max_layer_height = 0.6
|
||||
min_layer_height = 0.2
|
||||
nozzle_diameter = 0.8
|
||||
default_filament_profile = "Prusament ASA @AQI 0.8 nozzle"
|
||||
default_print_profile = 0.40mm Normal @AQ 0.8 nozzle
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:AzteQ Industrial]
|
||||
inherits = *AQI*
|
||||
printer_model = AQI
|
||||
printer_variant = 0.4
|
||||
max_print_height = 400
|
||||
default_filament_profile = "Prusament ASA @AQI"
|
||||
default_print_profile = 0.20mm Normal @AQ
|
||||
|
||||
@@ -0,0 +1,6 @@
|
||||
[printer:DeltiQ 2 + FlexPrint 2]
|
||||
inherits = *DeltiQ 2 FlexPrint 2*
|
||||
printer_model = DQ2+FP2
|
||||
printer_variant = 0.4
|
||||
max_print_height = 300
|
||||
|
||||
@@ -0,0 +1,6 @@
|
||||
[printer:DeltiQ 2 + FlexPrint]
|
||||
inherits = *DeltiQ 2 FlexPrint*
|
||||
printer_model = DQ2+FP
|
||||
printer_variant = 0.4
|
||||
max_print_height = 300
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:DeltiQ 2 - 0.25 nozzle]
|
||||
inherits = DeltiQ 2
|
||||
printer_variant = 0.25
|
||||
max_layer_height = 0.15
|
||||
min_layer_height = 0.07
|
||||
nozzle_diameter = 0.25
|
||||
default_filament_profile = "Fillamentum PLA @DQ2 0.25 nozzle"
|
||||
default_print_profile = 0.07mm Quality @DQ2 0.25 nozzle
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:DeltiQ 2 - 0.6 nozzle]
|
||||
inherits = DeltiQ 2
|
||||
printer_variant = 0.6
|
||||
max_layer_height = 0.4
|
||||
min_layer_height = 0.2
|
||||
nozzle_diameter = 0.6
|
||||
default_filament_profile = "Prusament PLA @DQ2 0.6 nozzle"
|
||||
default_print_profile = 0.30mm Normal @DQ2 0.6 nozzle
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:DeltiQ 2 - 0.8 nozzle]
|
||||
inherits = DeltiQ 2
|
||||
printer_variant = 0.8
|
||||
max_layer_height = 0.6
|
||||
min_layer_height = 0.3
|
||||
nozzle_diameter = 0.8
|
||||
default_filament_profile = "Prusament PLA @DQ2 0.8 nozzle"
|
||||
default_print_profile = 0.40mm Normal @DQ2 0.8 nozzle
|
||||
|
||||
@@ -0,0 +1,6 @@
|
||||
[printer:DeltiQ 2 Plus + FlexPrint 2]
|
||||
inherits = *DeltiQ 2 FlexPrint 2*
|
||||
printer_model = DQ2P+FP2
|
||||
printer_variant = 0.4
|
||||
max_print_height = 500
|
||||
|
||||
@@ -0,0 +1,6 @@
|
||||
[printer:DeltiQ 2 Plus + FlexPrint]
|
||||
inherits = *DeltiQ 2 FlexPrint*
|
||||
printer_model = DQ2P+FP
|
||||
printer_variant = 0.4
|
||||
max_print_height = 500
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:DeltiQ 2 Plus - 0.25 nozzle]
|
||||
inherits = DeltiQ 2 Plus
|
||||
printer_variant = 0.25
|
||||
max_layer_height = 0.15
|
||||
min_layer_height = 0.07
|
||||
nozzle_diameter = 0.25
|
||||
default_filament_profile = "Fillamentum PLA @DQ2 0.25 nozzle"
|
||||
default_print_profile = 0.07mm Quality @DQ2 0.25 nozzle
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:DeltiQ 2 Plus - 0.6 nozzle]
|
||||
inherits = DeltiQ 2 Plus
|
||||
printer_variant = 0.6
|
||||
max_layer_height = 0.4
|
||||
min_layer_height = 0.2
|
||||
nozzle_diameter = 0.6
|
||||
default_filament_profile = "Prusament PLA @DQ2 0.6 nozzle"
|
||||
default_print_profile = 0.30mm Normal @DQ2 0.6 nozzle
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:DeltiQ 2 Plus - 0.8 nozzle]
|
||||
inherits = DeltiQ 2 Plus
|
||||
printer_variant = 0.8
|
||||
max_layer_height = 0.6
|
||||
min_layer_height = 0.3
|
||||
nozzle_diameter = 0.8
|
||||
default_filament_profile = "Prusament PLA @DQ2 0.8 nozzle"
|
||||
default_print_profile = 0.40mm Normal @DQ2 0.8 nozzle
|
||||
|
||||
@@ -0,0 +1,6 @@
|
||||
[printer:DeltiQ 2 Plus]
|
||||
inherits = *DeltiQ 2*
|
||||
printer_model = DQ2P
|
||||
printer_variant = 0.4
|
||||
max_print_height = 500
|
||||
|
||||
@@ -0,0 +1,6 @@
|
||||
[printer:DeltiQ 2]
|
||||
inherits = *DeltiQ 2*
|
||||
printer_model = DQ2
|
||||
printer_variant = 0.4
|
||||
max_print_height = 300
|
||||
|
||||
@@ -0,0 +1,7 @@
|
||||
[printer:DeltiQ L]
|
||||
inherits = *DeltiQ*
|
||||
printer_model = DQL
|
||||
printer_variant = 0.4
|
||||
bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013
|
||||
max_print_height = 300
|
||||
|
||||
@@ -0,0 +1,11 @@
|
||||
[printer:DeltiQ M]
|
||||
inherits = *DeltiQ*
|
||||
printer_variant = 0.4
|
||||
bed_shape = 89.507x9.40756,88.0333x18.7121,85.5951x27.8115,82.2191x36.6063,77.9423x45,72.8115x52.9007,66.883x60.2218,60.2218x66.883,52.9007x72.8115,45x77.9423,36.6063x82.2191,27.8115x85.5951,18.7121x88.0333,9.40756x89.507,2.54949e-014x90,-9.40756x89.507,-18.7121x88.0333,-27.8115x85.5951,-36.6063x82.2191,-45x77.9423,-52.9007x72.8115,-60.2218x66.883,-66.883x60.2218,-72.8115x52.9007,-77.9423x45,-82.2191x36.6063,-85.5951x27.8115,-88.0333x18.7121,-89.507x9.40756,-90x5.09899e-014,-89.507x-9.40756,-88.0333x-18.7121,-85.5951x-27.8115,-82.2191x-36.6063,-77.9423x-45,-72.8115x-52.9007,-66.883x-60.2218,-60.2218x-66.883,-52.9007x-72.8115,-45x-77.9423,-36.6063x-82.2191,-27.8115x-85.5951,-18.7121x-88.0333,-9.40756x-89.507,-1.65327e-014x-90,9.40756x-89.507,18.7121x-88.0333,27.8115x-85.5951,36.6063x-82.2191,45x-77.9423,52.9007x-72.8115,60.2218x-66.883,66.883x-60.2218,72.8115x-52.9007,77.9423x-45,82.2191x-36.6063,85.5951x-27.8115,88.0333x-18.7121,89.507x-9.40756,90x-1.0198e-013
|
||||
max_print_height = 230
|
||||
printer_model = DQM
|
||||
retract_length = 3.7
|
||||
retract_length_toolchange = 10
|
||||
retract_speed = 30
|
||||
start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S[first_layer_temperature] ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-45 Y-77 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S[first_layer_temperature] ; Set Extruder Temperature and Wait\nG3 X45 Y-77 I45 J77 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:DeltiQ XL]
|
||||
inherits = *DeltiQ*
|
||||
printer_model = DQXL
|
||||
printer_variant = 0.4
|
||||
bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013
|
||||
max_print_height = 500
|
||||
retract_length = 4.5
|
||||
retract_speed = 35
|
||||
|
||||
@@ -0,0 +1,5 @@
|
||||
[printer:*AQD*]
|
||||
inherits = *AQI*
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_AQ\nPRINTER_MODEL_AQD
|
||||
start_gcode = ; START_GCODE\nT0\nM220 S100 ; Set feedmultiply back to 100 percent\n\nG90 ; Absolute positioning for motion\nM83 ; Relative extruder\nM107 ; Layer fan off\n\nG28 ; Home all axes\n\nM140 S[first_layer_bed_temperature] ; Set bed temperature\nM104 S{if filament_type[0]=~/(ABS)?(ABST)?(PC)?(PCABS)?(PA)?(PACF)?(PAGF)?/}180{else}150{endif} ; Set hotend material specific probing temperature\n[start_filament_gcode]\nM190 ; Wait for bed temperature\nM109 ; Wait for hotend probing temperature\n\nG32 ; Probe Z and calculate Z plane\nG29 ; Mesh bed probe\n\nM104 S[first_layer_temperature] ; Set hotend printing temperature\n\nG1009 ; Purge hotend\nG92 E0 ; Zero extruder
|
||||
|
||||
@@ -0,0 +1,24 @@
|
||||
[printer:*AQI*]
|
||||
inherits = *DeltiQ 2*
|
||||
max_print_height = 400
|
||||
bed_shape = 149.529x13.0821,147.82x26.0646,144.985x38.8487,141.048x51.3372,136.037x63.435,129.99x75.05,122.955x86.0938,114.983x96.4824,106.137x106.137,96.4824x114.983,86.0938x122.955,75.05x129.99,63.435x136.037,51.3372x141.048,38.8487x144.985,26.0646x147.82,13.0821x149.529,9.19097e-15x150.1,-13.0821x149.529,-26.0646x147.82,-38.8487x144.985,-51.3372x141.048,-63.435x136.037,-75.05x129.99,-86.0938x122.955,-96.4824x114.983,-106.137x106.137,-114.983x96.4824,-122.955x86.0938,-129.99x75.05,-136.037x63.435,-141.048x51.3372,-144.985x38.8487,-147.82x26.0646,-149.529x13.0821,-150.1x1.83819e-14,-149.529x-13.0821,-147.82x-26.0646,-144.985x-38.8487,-141.048x-51.3372,-136.037x-63.435,-129.99x-75.05,-122.955x-86.0938,-114.983x-96.4824,-106.137x-106.137,-96.4824x-114.983,-86.0938x-122.955,-75.05x-129.99,-63.435x-136.037,-51.3372x-141.048,-38.8487x-144.985,-26.0646x-147.82,-13.0821x-149.529,-2.75729e-14x-150.1,13.0821x-149.529,26.0646x-147.82,38.8487x-144.985,51.3372x-141.048,63.435x-136.037,75.05x-129.99,86.0938x-122.955,96.4824x-114.983,106.137x-106.137,114.983x-96.4824,122.955x-86.0938,129.99x-75.05,136.037x-63.435,141.048x-51.3372,144.985x-38.8487,147.82x-26.0646,149.529x-13.0821,150.1x-3.67639e-14
|
||||
before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
|
||||
end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed heater\nM141 S0 ; Turn off chamber heater\nM104 S0 ; Turn off hotend heater\n\nG28 ; Home all axes\n\nM107 ; Turn off layer fan\n\nG90 ; Absolute positioning for motion\nM220 S100 ; Feedmultiply back to 100percent\n\nM84 S5 ; Disable motor hold
|
||||
layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_AQ\nPRINTER_MODEL_AQI
|
||||
retract_before_travel = 3
|
||||
retract_before_wipe = 100%
|
||||
retract_layer_change = 1
|
||||
retract_length = 4
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0.2
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 30
|
||||
start_gcode = ; START_GCODE\nT0\nM220 S100 ; Set feedmultiply back to 100 percent\n\nG90 ; Absolute positioning for motion\nM83 ; Relative extruder\nM107 ; Layer fan off\n\nG28 ; Home all axes\n\nM140 S[first_layer_bed_temperature] ; Set bed temperature\nM104 S{if filament_type[0]=~/(ABS)?(ABST)?(PC)?(PCABS)?(PA)?(PACF)?(PAGF)?/}180{else}150{endif} ; Set hotend material specific probing temperature\n[start_filament_gcode]\nM190 ; Wait for bed temperature\nM109 ; Wait for hotend probing temperature\n\nG32 ; Probe Z and calculate Z plane\nG29 ; Mesh bed probe\n\nM104 S[first_layer_temperature] ; Set hotend printing temperature\n\nG1009 ; Purge hotend\nG92 E0 ; Zero extruder
|
||||
wipe = 1
|
||||
extruder_clearance_height = 65
|
||||
extruder_clearance_radius = 65
|
||||
|
||||
@@ -0,0 +1,7 @@
|
||||
[printer:*DeltiQ 2 FlexPrint 2*]
|
||||
inherits = *DeltiQ 2 FlexPrint*
|
||||
default_filament_profile = "Generic FLEX @DQ2FP2"
|
||||
retract_length = 0.8
|
||||
retract_speed = 25
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT2
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
[printer:*DeltiQ 2 FlexPrint*]
|
||||
inherits = *DeltiQ 2*
|
||||
start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT1 ; Select FlexPrint extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nG28 ; Home all axes\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder
|
||||
default_print_profile = 0.20mm FLEX @DQ2FP
|
||||
default_filament_profile = "Generic FLEX @DQ2FP"
|
||||
retract_length = 0.7
|
||||
retract_speed = 25
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT1
|
||||
machine_max_jerk_e = 0.6
|
||||
|
||||
@@ -0,0 +1,30 @@
|
||||
[printer:*DeltiQ 2*]
|
||||
inherits = *DeltiQ*
|
||||
default_filament_profile = "Prusament PLA @DQ2"
|
||||
default_print_profile = 0.20mm Normal @DQ2
|
||||
before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
|
||||
end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed\n\nG28 ; Home\n\nM104 S0 ; Turn off extruder\nM107 ; Turn off fan\n\nG90 ; Absolute positioning\nM220 S100 ; Feedmultiply back to 100percent\n\nM84 S5; Disable motors
|
||||
gcode_flavor = reprapfirmware
|
||||
layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
pause_print_gcode = M25
|
||||
start_gcode = ; START_GCODE\n\nT0 ; Select Titan extruder\nM220 S100 ; Set feedmultiply back to 100percent\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nG28 ; Home all axes\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG32 ; Probe Z and calculate Z plane\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2
|
||||
machine_limits_usage = time_estimate_only
|
||||
machine_max_acceleration_e = 9000
|
||||
machine_max_acceleration_extruding = 1000
|
||||
machine_max_acceleration_retracting = 1000
|
||||
machine_max_acceleration_travel = 2000
|
||||
machine_max_acceleration_x = 2000
|
||||
machine_max_acceleration_y = 2000
|
||||
machine_max_acceleration_z = 2000
|
||||
machine_max_feedrate_e = 50
|
||||
machine_max_feedrate_x = 300
|
||||
machine_max_feedrate_y = 300
|
||||
machine_max_feedrate_z = 300
|
||||
machine_max_jerk_e = 20
|
||||
machine_max_jerk_x = 10
|
||||
machine_max_jerk_y = 10
|
||||
machine_max_jerk_z = 10
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
|
||||
@@ -0,0 +1,52 @@
|
||||
[printer:*DeltiQ*]
|
||||
inherits =
|
||||
bed_shape = 124.624x10.9032,123.199x21.7234,120.837x32.3783,117.556x42.7867,113.379x52.8695,108.34x62.55,102.476x71.7544,95.8322x80.4127,88.4591x88.4591,80.4127x95.8322,71.7544x102.476,62.55x108.34,52.8695x113.379,42.7867x117.556,32.3783x120.837,21.7234x123.199,10.9032x124.624,7.66017e-15x125.1,-10.9032x124.624,-21.7234x123.199,-32.3783x120.837,-42.7867x117.556,-52.8695x113.379,-62.55x108.34,-71.7544x102.476,-80.4127x95.8322,-88.4591x88.4591,-95.8322x80.4127,-102.476x71.7544,-108.34x62.55,-113.379x52.8695,-117.556x42.7867,-120.837x32.3783,-123.199x21.7234,-124.624x10.9032,-125.1x1.53203e-14,-124.624x-10.9032,-123.199x-21.7234,-120.837x-32.3783,-117.556x-42.7867,-113.379x-52.8695,-108.34x-62.55,-102.476x-71.7544,-95.8322x-80.4127,-88.4591x-88.4591,-80.4127x-95.8322,-71.7544x-102.476,-62.55x-108.34,-52.8695x-113.379,-42.7867x-117.556,-32.3783x-120.837,-21.7234x-123.199,-10.9032x-124.624,-2.29805e-14x-125.1,10.9032x-124.624,21.7234x-123.199,32.3783x-120.837,42.7867x-117.556,52.8695x-113.379,62.55x-108.34,71.7544x-102.476,80.4127x-95.8322,88.4591x-88.4591,95.8322x-80.4127,102.476x-71.7544,108.34x-62.55,113.379x-52.8695,117.556x-42.7867,120.837x-32.3783,123.199x-21.7234,124.624x-10.9032,125.1x-3.06407e-14
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = "DeltiQ PLA"
|
||||
default_print_profile = DeltiQ 0.20mm Normal
|
||||
deretract_speed = 0
|
||||
end_gcode = ;END\nM104 S0 ; Turn extruder heater off\nM140 S0 ; Turn bed heater off\nG28 ; Home all axes\nM84 S5 ; Stop all axes and hold inidle for 5 seconds\nG90 ; Absolute positioning
|
||||
extra_loading_move = -2
|
||||
extruder_colour = #EC626F
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = repetier
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\nM117 layer [layer_num] at [layer_z]mm\n;[layer_z]\n
|
||||
max_layer_height = 0.25
|
||||
max_print_height = 300
|
||||
min_layer_height = 0.15
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
printer_model =
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQL
|
||||
printer_settings_id =
|
||||
printer_variant =
|
||||
printer_vendor = TriLAB Group s.r.o.
|
||||
remaining_times = 0
|
||||
retract_before_travel = 3
|
||||
retract_before_wipe = 100%
|
||||
retract_layer_change = 1
|
||||
retract_length = 4.0
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0.2
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 30
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S[first_layer_temperature] ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-62 Y-108 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S[first_layer_temperature] ; Set and wait - hotend temperature\nG3 X62 Y-108 I62 J108 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 0
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
extruder_clearance_height = 60
|
||||
extruder_clearance_radius = 45
|
||||
|
||||
Reference in New Issue
Block a user