Initial Profile Sources

profile_sources/non-prusa-fff/Trimaker/print/0.1 Layer - 0,4 Nozzle.ini

@@ -0,0 +1,5 @@
+[print:0.1 Layer - 0,4 Nozzle]
+inherits = *0.10mm*
+# alias = 0.10mm DETAIL 0,4
+compatible_printers_condition = nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Trimaker/print/0.2 Layer - 0,4 Nozzle - Speed.ini

@@ -0,0 +1,17 @@
+[print:0.2 Layer - 0,4 Nozzle - Speed]
+inherits = *0.20mm*
+# alias = 0.20mm NORMAL 0,4
+first_layer_speed = 30
+perimeter_speed = 75
+small_perimeter_speed = 100
+external_perimeter_speed = 60
+infill_speed = 175
+solid_infill_speed = 125
+top_solid_infill_speed = 125
+support_material_speed = 75
+bridge_speed = 75
+gap_fill_speed = 75
+max_print_speed = 250
+compatible_printers_condition = printer_model=="Trimaker Nebula Cloud" and nozzle_diameter[0]==0.4 or printer_model=="Trimaker Nebula" and nozzle_diameter[0]==0.4
+
+

profile_sources/non-prusa-fff/Trimaker/print/0.2 Layer - 0,4 Nozzle.ini

@@ -0,0 +1,5 @@
+[print:0.2 Layer - 0,4 Nozzle]
+inherits = *0.20mm*
+# alias = 0.20mm NORMAL 0,4
+compatible_printers_condition = nozzle_diameter[0]==0.4
+

profile_sources/non-prusa-fff/Trimaker/print/0.3 Layer - 0,4 Nozzle.ini

@@ -0,0 +1,9 @@
+[print:0.3 Layer - 0,4 Nozzle]
+inherits = *0.30mm*
+# alias = 0.30mm DRAFT 0,4
+compatible_printers_condition = nozzle_diameter[0]==0.4
+
+#///////////////////////////////////////////////////#
+#---------------# FILAMENT SETTINGS #---------------#
+#///////////////////////////////////////////////////#
+

profile_sources/non-prusa-fff/Trimaker/print/_0.10mm_.ini

@@ -0,0 +1,15 @@
+[print:*0.10mm*]
+inherits = *common*
+layer_height = 0.1
+first_layer_height = 0.15
+bottom_solid_layers = 4
+top_solid_layers = 9
+perimeters = 5
+bridge_flow_ratio = 0.6
+infill_acceleration = 1500
+max_print_speed = 200
+bridge_speed = 30
+support_material_contact_distance = 0.10
+support_material_interface_layers = 2
+support_material_threshold = 55
+

profile_sources/non-prusa-fff/Trimaker/print/_0.20mm_.ini

@@ -0,0 +1,9 @@
+[print:*0.20mm*]
+inherits = *common*
+layer_height = 0.2
+first_layer_height = 0.3
+bottom_solid_layers = 4
+top_solid_layers = 4
+bridge_flow_ratio = 0.8
+support_material_contact_distance = 0.20
+

profile_sources/non-prusa-fff/Trimaker/print/_0.30mm_.ini

@@ -0,0 +1,16 @@
+[print:*0.30mm*]
+inherits = *common*
+layer_height = 0.3
+first_layer_height = 0.35
+bottom_solid_layers = 3
+top_solid_layers = 4
+bridge_flow_ratio = 0.9
+support_material_contact_distance = 0.25
+infill_extrusion_width = 0.61
+
+#////////////////////////////////////////////////#
+#---------------# PRINT SETTINGS #---------------#
+#////////////////////////////////////////////////#
+
+#-----------# 0,4 NOZZLE #-----------#
+

profile_sources/non-prusa-fff/Trimaker/print/_common_.ini

@@ -0,0 +1,120 @@
+[print:*common*]
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 1500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeters_first = 0
+external_perimeter_extrusion_width = 0.45
+extra_perimeters = 0
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_extrusion_width = 0.42
+first_layer_speed = 20
+first_layer_acceleration = 1000
+first_layer_acceleration_over_raft = 0
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 30
+gcode_comments = 0
+gcode_label_objects = 1
+infill_anchor = 2.5
+infill_anchor_max = 12
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+interface_shells = 0
+max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+overhangs = 1
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{print_time}.gcode
+perimeters = 3
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_generator = arachne
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+top_fill_pattern = monotonic
+bottom_fill_pattern = monotonic
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirts = 1
+skirt_distance = 2
+skirt_height = 2
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+spiral_vase = 0
+standby_temperature_delta = -5
+auto_generated_supports = 0
+support_material = 1
+support_material_auto = 1
+support_material_style = snug
+support_material_extruder = 0
+support_material_extrusion_width = 0
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.22
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.3
+support_material_interface_speed = 80%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 50
+support_material_with_sheath = 1
+support_material_xy_spacing = 0.5
+support_material_bottom_contact_distance = 0
+raft_first_layer_expansion = 0
+support_material_bottom_interface_layers = -1
+raft_contact_distance = 0.2
+thin_walls = 0
+top_infill_extrusion_width = 0.45
+travel_speed = 100
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+xy_size_compensation = 0
+infill_acceleration = 1500
+external_perimeter_speed = 30
+perimeter_speed = 45
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+infill_speed = 50
+
+#///////////////////////////////////////////////////////#
+#---------------# LAYER HEIGHT SETTINGS #---------------#
+#///////////////////////////////////////////////////////#
+