Initial Profile Sources

profile_sources/non-prusa-fff/Trimaker/printer/Trimaker Cosmos II 0.4 nozzle.ini

@@ -0,0 +1,3 @@
+[printer:Trimaker Cosmos II 0.4 nozzle]
+inherits = *Trimaker Cosmos II*; *0.40nozzle*
+default_print_profile = 0.2 Layer - 0,4 Nozzle

profile_sources/non-prusa-fff/Trimaker/printer/Trimaker Nebula 0.4 nozzle.ini

@@ -0,0 +1,4 @@
+[printer:Trimaker Nebula  0.4 nozzle]
+inherits = *Trimaker Nebula*; *0.40nozzle*
+default_print_profile = 0.2 Layer - 0,4 Nozzle 
+

profile_sources/non-prusa-fff/Trimaker/printer/Trimaker Nebula Cloud 0.4 nozzle.ini

@@ -0,0 +1,4 @@
+[printer:Trimaker Nebula Cloud 0.4 nozzle]
+inherits = *Trimaker Nebula Cloud*; *0.40nozzle*
+default_print_profile = 0.2 Layer - 0,4 Nozzle 
+

profile_sources/non-prusa-fff/Trimaker/printer/_0.40nozzle_.ini

@@ -0,0 +1,11 @@
+[printer:*0.40nozzle*]
+nozzle_diameter = 0.40
+max_layer_height = 0.35
+min_layer_height = 0.1
+retract_lift_above = 0.2
+printer_variant = 0.4
+
+#//////////////////////////////////////////////////#
+#---------------# PRINTER PROFILES #---------------#
+#//////////////////////////////////////////////////#
+

profile_sources/non-prusa-fff/Trimaker/printer/_Trimaker Cosmos II_.ini

@@ -0,0 +1,13 @@
+[printer:*Trimaker Cosmos II*]
+inherits = *common*
+bed_shape = 0x0,200x0,200x200,0x200
+max_print_height = 200
+printer_model = Trimaker Cosmos II
+
+
+
+#//////////////////////////////////////////////////#
+#----------------# PRINTER MODELS #----------------#
+#//////////////////////////////////////////////////#
+
+

profile_sources/non-prusa-fff/Trimaker/printer/_Trimaker Nebula Cloud_.ini

@@ -0,0 +1,6 @@
+[printer:*Trimaker Nebula Cloud*]
+inherits = *common*
+bed_shape = 0x0,230x0,230x230,0x230
+max_print_height = 260
+printer_model = Trimaker Nebula Cloud
+

profile_sources/non-prusa-fff/Trimaker/printer/_Trimaker Nebula_.ini

@@ -0,0 +1,7 @@
+[printer:*Trimaker Nebula*]
+inherits = *common*
+bed_shape = 0x0,230x0,230x230,0x230
+max_print_height = 260
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG1 F3000 X0.5 Y0.5\nG1 F2000 Z0.300\nG1 F900 X0.5 Y51.5 E2.56436 ; intro line\nG92 E0.0
+printer_model = Trimaker Nebula
+

profile_sources/non-prusa-fff/Trimaker/printer/_common_.ini

@@ -0,0 +1,60 @@
+[printer:*common*]
+printer_technology = FFF
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 0
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = marlin2
+silent_mode = 0
+remaining_times = 0
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 1250,12500
+machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_x = 2500,2500
+machine_max_acceleration_y = 2500,2500
+machine_max_acceleration_z = 200,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 250
+machine_max_feedrate_y = 250
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 4.5,4.5
+machine_max_jerk_x = 20
+machine_max_jerk_y = 20
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.5
+min_layer_height = 0.07
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 1
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG29 ; bed leveling\nM500\nG1 F3000 X0.5 Y0.5\nG1 F2000 Z0.300\nG1 F900 X0.5 Y51.5 E2.56436 ; intro line\nG92 E0.0
+end_gcode =;printing object ENDGCODE\n M107; Apagamos fan\n G90\n G92 E0\n G1 X200 Y200\n G91\n G1 Z5\n G92 E0\n M140 S0; Enfriamos\n M104 S0; Enfriamos\n M84\n G90\n M117 Impresion finalizada\n M300 S440 P700\n
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+z_offset = 0
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
+