Initial Profile Sources

profile_sources/non-prusa-fff/Zonestar/filament/Generic ABS @Zonestar.ini

@@ -0,0 +1,32 @@
+[filament:Generic ABS @Zonestar]
+bed_temperature = 100
+bridge_fan_speed = 30
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_minimal_purge_on_wipe_tower = 50
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_type = ABS
+filament_unloading_speed = 40
+filament_unloading_speed_start = 60
+filament_vendor = Generic
+first_layer_bed_temperature = 100
+first_layer_temperature = 245
+max_fan_speed = 0
+min_fan_speed = 0
+min_print_speed = 15
+slowdown_below_layer_time = 25
+temperature = 245
+

profile_sources/non-prusa-fff/Zonestar/filament/Generic PETG @Zonestar.ini

@@ -0,0 +1,35 @@
+[filament:Generic PETG @Zonestar]
+bed_temperature = 70
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 50
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = PETG
+filament_unloading_speed = 40
+filament_unloading_speed_start = 60
+filament_vendor = Generic
+first_layer_bed_temperature = 70
+first_layer_temperature = 210
+full_fan_speed_layer = 0
+max_fan_speed = 50
+min_fan_speed = 25
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; Filament gcode\n"
+temperature = 210
+

profile_sources/non-prusa-fff/Zonestar/filament/Generic PLA @Zonestar.ini

@@ -0,0 +1,36 @@
+[filament:Generic PLA @Zonestar]
+bed_temperature = 60
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 50
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unloading_speed = 40
+filament_unloading_speed_start = 60
+filament_vendor = Generic
+filament_wipe = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 200
+full_fan_speed_layer = 5
+max_fan_speed = 100
+min_fan_speed = 50
+min_print_speed = 10
+slowdown_below_layer_time = 5
+temperature = 200
+

profile_sources/non-prusa-fff/Zonestar/filament/Generic TPU @Zonestar.ini

@@ -0,0 +1,35 @@
+[filament:Generic TPU @Zonestar]
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 3
+filament_minimal_purge_on_wipe_tower = 50
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_toolchange_delay = 0
+filament_type = FLEX
+filament_unloading_speed = 30
+filament_unloading_speed_start = 30
+filament_vendor = Generic
+first_layer_bed_temperature = 50
+first_layer_temperature = 225
+full_fan_speed_layer = 0
+max_fan_speed = 100
+min_fan_speed = 50
+min_print_speed = 10
+slowdown_below_layer_time = 5
+temperature = 225
+
+###################
+####  printer  ####
+###################