mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-10-01 02:27:17 +00:00
Initial Profile Sources
This commit is contained in:
Dark98
@@ -0,0 +1,32 @@
|
||||
[printer:Zonestar Z5+M2 HOTEND]
|
||||
inherits = *common*
|
||||
printer_model = Z5
|
||||
printer_variant = 0.4
|
||||
bed_shape = 0x0,220x0,220x220,0x220
|
||||
default_filament_profile = Generic PLA @Zonestar
|
||||
default_print_profile = 0.20mm @Zonestar MULTI
|
||||
deretract_speed = 30,30
|
||||
before_layer_gcode = G92 E0
|
||||
end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
|
||||
extruder_colour = #FF0000;#00FF00
|
||||
extruder_offset = 0x0,0x0
|
||||
max_layer_height = 0.3,0.3
|
||||
max_print_height = 220
|
||||
min_layer_height = 0.15,0.15
|
||||
nozzle_diameter = 0.4,0.4
|
||||
retract_before_travel = 2,2
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 0
|
||||
retract_length = 10,10
|
||||
retract_length_toolchange = 0,0
|
||||
retract_lift = 0,0
|
||||
retract_lift_above = 0,0
|
||||
retract_lift_below = 0,0
|
||||
retract_restart_extra = 0,0
|
||||
retract_restart_extra_toolchange = 0,0
|
||||
retract_speed = 35,35
|
||||
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
|
||||
use_relative_e_distances = 1
|
||||
wipe = 0,0
|
||||
|
||||
|
||||
@@ -0,0 +1,30 @@
|
||||
[printer:Zonestar Z5X]
|
||||
inherits = *common*
|
||||
printer_model = Z5X
|
||||
printer_variant = 0.4
|
||||
bed_shape = 0x0,310x0,310x310,0x310
|
||||
default_filament_profile = Generic PLA @Zonestar
|
||||
default_print_profile = 0.20mm @Zonestar SINGLE
|
||||
deretract_speed = 30
|
||||
end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
|
||||
extruder_colour = #00FF00
|
||||
extruder_offset = 0x0
|
||||
min_layer_height = 0.1
|
||||
max_layer_height = 0.3
|
||||
max_print_height = 400
|
||||
nozzle_diameter = 0.4
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 0
|
||||
retract_length = 6.5
|
||||
retract_length_toolchange = 0
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 40
|
||||
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000; lift nozzle\nG1 X5 Y5 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y50 F5000 ; quick wipe\nG92 E0
|
||||
use_relative_e_distances = 0
|
||||
|
||||
#Z8 with different types of hotend
|
||||
@@ -0,0 +1,29 @@
|
||||
[printer:Zonestar Z6]
|
||||
inherits = *common*
|
||||
printer_model = Z6
|
||||
printer_variant = 0.4
|
||||
bed_shape = 0x0,150x0,150x150,0x150
|
||||
default_filament_profile = Generic PLA @Zonestar
|
||||
default_print_profile = 0.20mm @Zonestar SINGLE
|
||||
deretract_speed = 30
|
||||
end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
|
||||
extruder_colour = #00FF00
|
||||
extruder_offset = 0x0
|
||||
min_layer_height = 0.1
|
||||
max_layer_height = 0.3
|
||||
max_print_height = 150
|
||||
nozzle_diameter = 0.4
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 0
|
||||
retract_length = 6.5
|
||||
retract_length_toolchange = 0
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 40
|
||||
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000; lift nozzle\nG1 X5 Y5 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y100 E8 F600 ; prime nozzle\nG1 Y50 F5000 ; quick wipe\nG92 E0
|
||||
use_relative_e_distances = 0
|
||||
|
||||
@@ -0,0 +1,30 @@
|
||||
[printer:Zonestar Z8+DDE]
|
||||
inherits = *common*
|
||||
printer_model = Z8
|
||||
printer_variant = 0.4
|
||||
bed_shape = 0x0,310x0,310x310,0x310
|
||||
default_filament_profile = Generic TPU @Zonestar
|
||||
default_print_profile = 0.20mm @Zonestar SINGLE
|
||||
deretract_speed = 30
|
||||
end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
|
||||
extruder_colour = #00FF00
|
||||
extruder_offset = 0x0
|
||||
max_layer_height = 0.3
|
||||
max_print_height = 400
|
||||
min_layer_height = 0.1
|
||||
nozzle_diameter = 0.4
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 0
|
||||
retract_length = 6.5
|
||||
retract_length_toolchange = 0
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 40
|
||||
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
|
||||
use_relative_e_distances = 0
|
||||
|
||||
#Z9 with different types of hotend
|
||||
@@ -0,0 +1,33 @@
|
||||
[printer:Zonestar Z8+E4 HOTEND]
|
||||
inherits = *common*
|
||||
printer_model = Z8
|
||||
printer_variant = 0.4
|
||||
bed_shape = 0x0,310x0,310x310,0x310
|
||||
default_filament_profile = Generic PLA @Zonestar
|
||||
default_print_profile = 0.20mm @Zonestar MULTI
|
||||
deretract_speed = 30,30,30,30
|
||||
before_layer_gcode = G92 E0
|
||||
end_gcode = G1 E-30 F2100 ;pull out filament\nG28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
|
||||
extruder_colour = #E0E0E0;#FF0000;#00FF00;#0000FF
|
||||
extruder_offset = 0x0,0x0,0x0,0x0
|
||||
max_layer_height = 0.3,0.3,0.3,0.3
|
||||
max_print_height = 400
|
||||
min_layer_height = 0.1,0.1,0.1,0.1
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4
|
||||
retract_before_travel = 2,2,2,2
|
||||
retract_before_wipe = 0%,0%,0%,0%
|
||||
retract_layer_change = 0,0,0,0
|
||||
retract_length = 8,8,8,8
|
||||
retract_length_toolchange = 0,0,0,0
|
||||
retract_lift = 0,0,0,0
|
||||
retract_lift_above = 0,0,0,0
|
||||
retract_lift_below = 0,0,0,0
|
||||
retract_restart_extra = 0,0,0,0
|
||||
retract_restart_extra_toolchange = 0,0,0,0
|
||||
retract_speed = 35,35,35,35
|
||||
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
|
||||
toolchange_gcode = G92 E0\nG1 E-30 F1200;pull filament\nG92 E0\nT[next_extruder];Change extruder\nG92 E0\nG1 E15 F1800; push filament-1\nG1 E25 F900; pushfilament-2\nG1 E29 F1200; push filament-3\nG92 E0
|
||||
use_relative_e_distances = 1
|
||||
wipe = 0,0,0,0
|
||||
layer_gcode = G92 E0
|
||||
|
||||
@@ -0,0 +1,32 @@
|
||||
[printer:Zonestar Z8+M3 HOTEND]
|
||||
inherits = *common*
|
||||
printer_model = Z8
|
||||
printer_variant = 0.4
|
||||
bed_shape = 0x0,310x0,310x310,0x310
|
||||
default_filament_profile = Generic PLA @Zonestar
|
||||
default_print_profile = 0.20mm @Zonestar MULTI
|
||||
deretract_speed = 30,30,30
|
||||
before_layer_gcode = G92 E0
|
||||
end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
|
||||
extruder_colour = #FF0000;#00FF00;#0000FF
|
||||
extruder_offset = 0x0,0x0,0x0
|
||||
max_layer_height = 0.3,0.3,0.3
|
||||
max_print_height = 400
|
||||
min_layer_height = 0.15,0.15,0.15
|
||||
nozzle_diameter = 0.4,0.4,0.4
|
||||
retract_before_travel = 2,2,2
|
||||
retract_before_wipe = 0%,0%,0%
|
||||
retract_layer_change = 0,0,0
|
||||
retract_length = 10,10,10
|
||||
retract_length_toolchange = 0,0,0
|
||||
retract_lift = 0,0,0
|
||||
retract_lift_above = 0,0,0
|
||||
retract_lift_below = 0,0,0
|
||||
retract_restart_extra = 0,0,0
|
||||
retract_restart_extra_toolchange = 0,0,0
|
||||
retract_speed = 35,35,35
|
||||
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
|
||||
use_relative_e_distances = 1
|
||||
wipe = 0,0,0
|
||||
layer_gcode = G92 E0
|
||||
|
||||
@@ -0,0 +1,32 @@
|
||||
[printer:Zonestar Z8+M4 HOTEND]
|
||||
inherits = *common*
|
||||
printer_model = Z8
|
||||
printer_variant = 0.4
|
||||
bed_shape = 0x0,310x0,310x310,0x310
|
||||
default_filament_profile = Generic PLA @Zonestar
|
||||
default_print_profile = 0.20mm @Zonestar MULTI
|
||||
deretract_speed = 30,30,30,30
|
||||
before_layer_gcode = G92 E0
|
||||
end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
|
||||
extruder_colour = #E0E0E0;#FF0000;#00FF00;#0000FF
|
||||
extruder_offset = 0x0,0x0,0x0,0x0
|
||||
max_layer_height = 0.3,0.3,0.3,0.3
|
||||
max_print_height = 400
|
||||
min_layer_height = 0.15,0.15,0.15,0.15
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4
|
||||
retract_before_travel = 2,2,2,2
|
||||
retract_before_wipe = 0%,0%,0%,0%
|
||||
retract_layer_change = 0,0,0,0
|
||||
retract_length = 10,10,10,10
|
||||
retract_length_toolchange = 0,0,0,0
|
||||
retract_lift = 0,0,0,0
|
||||
retract_lift_above = 0,0,0,0
|
||||
retract_lift_below = 0,0,0,0
|
||||
retract_restart_extra = 0,0,0,0
|
||||
retract_restart_extra_toolchange = 0,0,0,0
|
||||
retract_speed = 35,35,35,35
|
||||
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
|
||||
use_relative_e_distances = 1
|
||||
wipe = 0,0,0,0
|
||||
layer_gcode = G92 E0
|
||||
|
||||
@@ -0,0 +1,28 @@
|
||||
[printer:Zonestar Z9+DDE]
|
||||
inherits = *common*
|
||||
printer_model = Z9
|
||||
printer_variant = 0.4
|
||||
bed_shape = 0x0,310x0,310x310,0x310
|
||||
default_filament_profile = Generic TPU @Zonestar
|
||||
default_print_profile = 0.20mm @Zonestar SINGLE
|
||||
deretract_speed = 30
|
||||
end_gcode = G28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
|
||||
extruder_colour = #00FF00
|
||||
extruder_offset = 0x0
|
||||
max_layer_height = 0.3
|
||||
max_print_height = 400
|
||||
min_layer_height = 0.1
|
||||
nozzle_diameter = 0.4
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 0
|
||||
retract_length = 6.5
|
||||
retract_length_toolchange = 0
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 40
|
||||
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
|
||||
use_relative_e_distances = 0
|
||||
@@ -0,0 +1,33 @@
|
||||
[printer:Zonestar Z9+E4 HOTEND]
|
||||
inherits = *common*
|
||||
printer_model = Z9
|
||||
printer_variant = 0.4
|
||||
bed_shape = 0x0,310x0,310x310,0x310
|
||||
default_filament_profile = Generic PLA @Zonestar
|
||||
default_print_profile = 0.20mm @Zonestar MULTI
|
||||
deretract_speed = 30,30,30,30
|
||||
before_layer_gcode = G92 E0
|
||||
end_gcode = G1 E-30 F2100 ;pull out filament\nG28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
|
||||
extruder_colour = #E0E0E0;#FF0000;#00FF00;#0000FF
|
||||
extruder_offset = 0x0,0x0,0x0,0x0
|
||||
max_layer_height = 0.3,0.3,0.3,0.3
|
||||
max_print_height = 400
|
||||
min_layer_height = 0.1,0.1,0.1,0.1
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4
|
||||
retract_before_travel = 2,2,2,2
|
||||
retract_before_wipe = 0%,0%,0%,0%
|
||||
retract_layer_change = 0,0,0,0
|
||||
retract_length = 8,8,8,8
|
||||
retract_length_toolchange = 0,0,0,0
|
||||
retract_lift = 0,0,0,0
|
||||
retract_lift_above = 0,0,0,0
|
||||
retract_lift_below = 0,0,0,0
|
||||
retract_restart_extra = 0,0,0,0
|
||||
retract_restart_extra_toolchange = 0,0,0,0
|
||||
retract_speed = 35,35,35,35
|
||||
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
|
||||
toolchange_gcode = G92 E0\nG1 E-30 F1200;pull filament\nG92 E0\nT[next_extruder];Change extruder\nG92 E0\nG1 E15 F1800; push filament-1\nG1 E25 F900; pushfilament-2\nG1 E29 F1200; push filament-3\nG92 E0
|
||||
use_relative_e_distances = 1
|
||||
wipe = 0,0,0,0
|
||||
layer_gcode = G92 E0
|
||||
|
||||
@@ -0,0 +1,32 @@
|
||||
[printer:Zonestar Z9+M3 HOTEND]
|
||||
inherits = *common*
|
||||
printer_model = Z9
|
||||
printer_variant = 0.4
|
||||
bed_shape = 0x0,310x0,310x310,0x310
|
||||
default_filament_profile = Generic PLA @Zonestar
|
||||
default_print_profile = 0.20mm @Zonestar MULTI
|
||||
deretract_speed = 30,30,30
|
||||
before_layer_gcode = G92 E0
|
||||
end_gcode = G28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
|
||||
extruder_colour = #FF0000;#00FF00;#0000FF
|
||||
extruder_offset = 0x0,0x0,0x0
|
||||
max_layer_height = 0.3,0.3,0.3
|
||||
max_print_height = 400
|
||||
min_layer_height = 0.15,0.15,0.15
|
||||
nozzle_diameter = 0.4,0.4,0.4
|
||||
retract_before_travel = 2,2,2
|
||||
retract_before_wipe = 0%,0%,0%
|
||||
retract_layer_change = 0,0,0
|
||||
retract_length = 10,10,10
|
||||
retract_length_toolchange = 0,0,0
|
||||
retract_lift = 0,0,0
|
||||
retract_lift_above = 0,0,0
|
||||
retract_lift_below = 0,0,0
|
||||
retract_restart_extra = 0,0,0
|
||||
retract_restart_extra_toolchange = 0,0,0
|
||||
retract_speed = 35,35,35
|
||||
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
|
||||
use_relative_e_distances = 1
|
||||
wipe = 0,0,0
|
||||
layer_gcode = G92 E0
|
||||
|
||||
@@ -0,0 +1,32 @@
|
||||
[printer:Zonestar Z9+M4 HOTEND]
|
||||
inherits = *common*
|
||||
printer_model = Z9
|
||||
printer_variant = 0.4
|
||||
bed_shape = 0x0,310x0,310x310,0x310
|
||||
default_filament_profile = Generic PLA @Zonestar
|
||||
default_print_profile = 0.20mm @Zonestar MULTI
|
||||
deretract_speed = 30,30,30,30
|
||||
before_layer_gcode = G92 E0
|
||||
end_gcode = G28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
|
||||
extruder_colour = #E0E0E0;#FF0000;#00FF00;#0000FF
|
||||
extruder_offset = 0x0,0x0,0x0,0x0
|
||||
max_layer_height = 0.3,0.3,0.3,0.3
|
||||
max_print_height = 400
|
||||
min_layer_height = 0.15,0.15,0.15,0.15
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4
|
||||
retract_before_travel = 2,2,2,2
|
||||
retract_before_wipe = 0%,0%,0%,0%
|
||||
retract_layer_change = 0,0,0,0
|
||||
retract_length = 10,10,10,10
|
||||
retract_length_toolchange = 0,0,0,0
|
||||
retract_lift = 0,0,0,0
|
||||
retract_lift_above = 0,0,0,0
|
||||
retract_lift_below = 0,0,0,0
|
||||
retract_restart_extra = 0,0,0,0
|
||||
retract_restart_extra_toolchange = 0,0,0,0
|
||||
retract_speed = 35,35,35,35
|
||||
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
|
||||
use_relative_e_distances = 1
|
||||
wipe = 0,0,0,0
|
||||
layer_gcode = G92 E0
|
||||
|
||||
@@ -0,0 +1,49 @@
|
||||
[printer:*common*]
|
||||
printer_technology = FFF
|
||||
before_layer_gcode =
|
||||
between_objects_gcode =
|
||||
color_change_gcode = M600
|
||||
cooling_tube_retraction = 35
|
||||
default_filament_profile =
|
||||
default_print_profile =
|
||||
deretract_speed =
|
||||
end_gcode =
|
||||
extra_loading_move = -2
|
||||
gcode_flavor = marlin2
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = octoprint
|
||||
layer_gcode =
|
||||
machine_limits_usage = ignore
|
||||
machine_max_acceleration_e = 10000
|
||||
machine_max_acceleration_extruding = 1500
|
||||
machine_max_acceleration_retracting = 1500
|
||||
machine_max_acceleration_travel = 1500
|
||||
machine_max_acceleration_x = 9000
|
||||
machine_max_acceleration_y = 9000
|
||||
machine_max_acceleration_z = 500
|
||||
machine_max_feedrate_e = 120
|
||||
machine_max_feedrate_x = 500
|
||||
machine_max_feedrate_y = 500
|
||||
machine_max_feedrate_z = 12
|
||||
machine_max_jerk_e = 2.5
|
||||
machine_max_jerk_x = 10
|
||||
machine_max_jerk_y = 10
|
||||
machine_max_jerk_z = 0.2
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
max_layer_height = 0.3
|
||||
min_layer_height = 0.1
|
||||
nozzle_diameter = 0.4
|
||||
pause_print_gcode =
|
||||
remaining_times = 0
|
||||
retract_speed = 40
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 0
|
||||
wipe = 0
|
||||
z_offset = 0
|
||||
|
||||
Reference in New Issue
Block a user