mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-08 00:41:08 +00:00
Initial Profile Sources
This commit is contained in:
Dark98
Binary file not shown.
|
After Width: | Height: | Size: 57 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 49 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 53 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 51 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 45 KiB |
@@ -0,0 +1 @@
|
||||
<svg xmlns="http://www.w3.org/2000/svg" width="0" height="0" viewBox="0 0 0 0"/>
|
||||
|
After Width: | Height: | Size: 81 B |
Binary file not shown.
@@ -0,0 +1 @@
|
||||
<svg xmlns="http://www.w3.org/2000/svg" width="0" height="0" viewBox="0 0 0 0"/>
|
||||
|
After Width: | Height: | Size: 81 B |
Binary file not shown.
@@ -0,0 +1,7 @@
|
||||
[filament:Atomic PLA @GCREATE]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Atomic Filament
|
||||
temperature = 215
|
||||
first_layer_temperature = 205
|
||||
bed_temperature = 60
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
[filament:ColorFabb Woodfill PLA @GCREATE]
|
||||
inherits = *WOODFILLPLA*
|
||||
filament_vendor = ColorFabb
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
[filament:Generic ABS @GCREATE]
|
||||
inherits = *ABS*
|
||||
filament_vendor = Generic
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
[filament:Generic CF Nylon @GCREATE]
|
||||
inherits = *CFNYLON*
|
||||
filament_vendor = Generic
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
[filament:Generic CF PETG @GCREATE]
|
||||
inherits = *CFPETG*
|
||||
filament_vendor = Generic
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
[filament:Generic CF PLA @GCREATE]
|
||||
inherits = *CFPLA*
|
||||
filament_vendor = Generic
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
[filament:Generic HIPS @GCREATE]
|
||||
inherits = *PET*
|
||||
filament_vendor = Generic
|
||||
filament_density = 1.04
|
||||
temperature = 230
|
||||
first_layer_temperature = 235
|
||||
bed_temperature = 100
|
||||
first_layer_bed_temperature = 100
|
||||
filament_type = HIPS
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[filament:Generic PETG @GCREATE]
|
||||
inherits = *PET*
|
||||
filament_vendor = Generic
|
||||
temperature = 230
|
||||
bed_temperature = 70
|
||||
first_layer_temperature = 235
|
||||
first_layer_bed_temperature = 70
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
[filament:Generic PLA @GCREATE]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Generic
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[filament:Generic PLA no Heated Bed @GCREATE]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Generic
|
||||
# set bed to zero
|
||||
first_layer_temperature = 205
|
||||
temperature = 205
|
||||
first_layer_bed_temperature = 0
|
||||
bed_temperature = 0
|
||||
|
||||
+39
@@ -0,0 +1,39 @@
|
||||
[filament:Generic PVA @GCREATE - PLA and PVA Support]
|
||||
bed_temperature = 0
|
||||
bridge_fan_speed = 75
|
||||
#compatible_printers_condition = (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 15
|
||||
filament_colour = #F5F2C4
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 0
|
||||
filament_loading_speed = 30
|
||||
filament_loading_speed_start = 30
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 7
|
||||
filament_ramming_parameters = "0"
|
||||
filament_settings_id = "Generic PVA Support @GCREATE"
|
||||
filament_soluble = 1
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PVA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 30
|
||||
filament_unloading_speed_start = 30
|
||||
filament_vendor = Generic
|
||||
first_layer_temperature = 195
|
||||
inherits = Generic PLA @GCREATE
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 50
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 195
|
||||
|
||||
#################################
|
||||
# SET COMMON PRINTER SETTINGS #
|
||||
#################################
|
||||
|
||||
# Common printer preset
|
||||
@@ -0,0 +1,4 @@
|
||||
[filament:Generic TPU 90A @GCREATE]
|
||||
inherits = *TPU90A*
|
||||
filament_vendor = Generic
|
||||
|
||||
@@ -0,0 +1,6 @@
|
||||
[filament:HT PLA @GCREATE]
|
||||
inherits = *PLA*
|
||||
filament_vendor = ProtoPasta
|
||||
temperature = 250
|
||||
bed_temperature = 70
|
||||
|
||||
@@ -0,0 +1,11 @@
|
||||
[filament:Prusament PETG @GCREATE]
|
||||
inherits = *PET*
|
||||
filament_vendor = Prusa Polymers
|
||||
temperature = 245
|
||||
bed_temperature = 70
|
||||
bridge_fan_speed = 50
|
||||
first_layer_temperature = 245
|
||||
first_layer_bed_temperature = 70
|
||||
filament_cost = 24.99
|
||||
filament_density = 1.27
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
[filament:Prusament PLA @GCREATE]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Prusa Polymers
|
||||
temperature = 205
|
||||
bed_temperature = 60
|
||||
first_layer_temperature = 215
|
||||
first_layer_bed_temperature = 50
|
||||
filament_cost = 24.99
|
||||
filament_density = 1.24
|
||||
|
||||
@@ -0,0 +1,6 @@
|
||||
[filament:Push Plastic PLA @GCREATE]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Push Plastic
|
||||
temperature = 200
|
||||
bed_temperature = 60
|
||||
|
||||
@@ -0,0 +1,20 @@
|
||||
[filament:*ABS*]
|
||||
inherits = *common*
|
||||
bed_temperature = 70
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 3
|
||||
fan_below_layer_time = 15
|
||||
filament_colour = #FF8000
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_type = ABS
|
||||
filament_density = 1.27
|
||||
filament_cost = 30
|
||||
first_layer_bed_temperature = 80
|
||||
first_layer_temperature = 235
|
||||
fan_always_on = 0
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 20
|
||||
bridge_fan_speed = 50
|
||||
temperature = 235
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
|
||||
|
||||
@@ -0,0 +1,14 @@
|
||||
[filament:*CFNYLON*]
|
||||
inherits = *common*
|
||||
filament_type = Carbon Fiber
|
||||
|
||||
#need to add speed, cooling, retraction and brim
|
||||
temperature = 250
|
||||
bed_temperature = 65
|
||||
bridge_fan_speed = 50
|
||||
first_layer_temperature = 250
|
||||
first_layer_bed_temperature = 65
|
||||
#filament_cost = 24.99
|
||||
filament_density = 1.06
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
|
||||
|
||||
@@ -0,0 +1,5 @@
|
||||
[filament:*CFPETG*]
|
||||
inherits = *common*; *PET*
|
||||
filament_type = Carbon Fiber
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
|
||||
|
||||
@@ -0,0 +1,14 @@
|
||||
[filament:*CFPLA*]
|
||||
inherits = *common*
|
||||
filament_type = Carbon Fiber
|
||||
|
||||
#need to add speed, cooling, retraction and brim
|
||||
|
||||
#temperature = 245
|
||||
#bed_temperature = 70
|
||||
#first_layer_temperature = 245
|
||||
#first_layer_bed_temperature = 70
|
||||
#filament_cost = 24.99
|
||||
#filament_density = 1.27
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
|
||||
|
||||
@@ -0,0 +1,20 @@
|
||||
[filament:*PET*]
|
||||
inherits = *common*
|
||||
bed_temperature = 70
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
fan_below_layer_time = 15
|
||||
filament_colour = #FF8000
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_type = PETG
|
||||
filament_density = 1.27
|
||||
filament_cost = 30
|
||||
first_layer_bed_temperature = 70
|
||||
first_layer_temperature = 240
|
||||
fan_always_on = 1
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 20
|
||||
bridge_fan_speed = 50
|
||||
temperature = 240
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
|
||||
|
||||
@@ -0,0 +1,30 @@
|
||||
[filament:*PLA*]
|
||||
inherits = *common*
|
||||
extrusion_multiplier = 0.94
|
||||
bed_temperature = 60
|
||||
fan_below_layer_time = 15
|
||||
filament_colour = #FF3232
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_type = PLA
|
||||
filament_density = 1.24
|
||||
filament_cost = 20
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 200
|
||||
|
||||
filament_cooling_moves = 0
|
||||
filament_loading_speed = 30
|
||||
filament_loading_speed_start = 30
|
||||
filament_ramming_parameters = "0"
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 30
|
||||
filament_unloading_speed_start = 30
|
||||
|
||||
fan_always_on = 1
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 40
|
||||
bridge_fan_speed = 80
|
||||
temperature = 200
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
|
||||
|
||||
@@ -0,0 +1,21 @@
|
||||
[filament:*TPU90A*]
|
||||
inherits = *common*
|
||||
filament_type = TPU
|
||||
|
||||
filament_density = 1.20
|
||||
filament_cost = 25
|
||||
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 215
|
||||
temperature = 215
|
||||
bed_temperature = 60
|
||||
|
||||
fan_always_on = 1
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 35
|
||||
bridge_fan_speed = 60
|
||||
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
|
||||
|
||||
@@ -0,0 +1,15 @@
|
||||
[filament:*WOODFILLPLA*]
|
||||
inherits = *common*; *PLA*
|
||||
|
||||
#need to add speed, cooling, retraction and brim
|
||||
|
||||
#temperature = 245
|
||||
#bed_temperature = 70
|
||||
#first_layer_temperature = 245
|
||||
#first_layer_bed_temperature = 70
|
||||
#filament_cost = 24.99
|
||||
#filament_density = 1.27
|
||||
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
|
||||
|
||||
#specific filament settings per brand. These are the names displayed in the list
|
||||
@@ -0,0 +1,12 @@
|
||||
[filament:*common*]
|
||||
cooling = 0
|
||||
extrusion_multiplier = 1
|
||||
filament_diameter = 1.75
|
||||
filament_notes = ""
|
||||
filament_settings_id = ""
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
|
||||
|
||||
|
||||
# Common filament preset across all PLA filaments
|
||||
@@ -0,0 +1,414 @@
|
||||
{
|
||||
"repo": {
|
||||
"id": "non-prusa-fff",
|
||||
"name": "Other FFF",
|
||||
"description": "FFF Printers by other vendors",
|
||||
"visibility": ""
|
||||
},
|
||||
"vendor": "gCreate",
|
||||
"version": "2.1.0",
|
||||
"index_name": "gCreate.idx",
|
||||
"section_order": [
|
||||
{
|
||||
"type": "vendor",
|
||||
"name": "vendor",
|
||||
"path": "vendor/vendor.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer_model",
|
||||
"name": "GMAX15P",
|
||||
"path": "printer_model/GMAX15P.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer_model",
|
||||
"name": "GMAX2",
|
||||
"path": "printer_model/GMAX2.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer_model",
|
||||
"name": "GMAX2PRO",
|
||||
"path": "printer_model/GMAX2PRO.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer_model",
|
||||
"name": "GMAX2DUAL2IN1",
|
||||
"path": "printer_model/GMAX2DUAL2IN1.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer_model",
|
||||
"name": "GMAX2DUAL",
|
||||
"path": "printer_model/GMAX2DUAL.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "*common*",
|
||||
"path": "print/_common_.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "*0.10mm*",
|
||||
"path": "print/_0.10mm_.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "*0.15mm*",
|
||||
"path": "print/_0.15mm_.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "*0.20mm*",
|
||||
"path": "print/_0.20mm_.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "*0.25mm*",
|
||||
"path": "print/_0.25mm_.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "*0.3mm*",
|
||||
"path": "print/_0.3mm_.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "*0.4mm*",
|
||||
"path": "print/_0.4mm_.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "*0.5mm*",
|
||||
"path": "print/_0.5mm_.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "*0.6mm*",
|
||||
"path": "print/_0.6mm_.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "*SLOW*",
|
||||
"path": "print/_SLOW_.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "*FAST*",
|
||||
"path": "print/_FAST_.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "0.10mm - Very Thin Layers @GCREATE",
|
||||
"path": "print/0.10mm - Very Thin Layers @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "0.15mm - Thin Layers @GCREATE",
|
||||
"path": "print/0.15mm - Thin Layers @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "0.20mm - Standard Layers @GCREATE",
|
||||
"path": "print/0.20mm - Standard Layers @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "0.20mm - Standard Layers Slow (PETG and TPU) @GCREATE",
|
||||
"path": "print/0.20mm - Standard Layers Slow (PETG and TPU) @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "0.20mm - Standard Layers Fast @GCREATE",
|
||||
"path": "print/0.20mm - Standard Layers Fast @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "0.25mm - Thick Layers @GCREATE",
|
||||
"path": "print/0.25mm - Thick Layers @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "0.30mm - Very Thick Layers @GCREATE",
|
||||
"path": "print/0.30mm - Very Thick Layers @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "0.40mm - High Output Layers @GCREATE",
|
||||
"path": "print/0.40mm - High Output Layers @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "0.50mm - High Output Layers @GCREATE",
|
||||
"path": "print/0.50mm - High Output Layers @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "0.60mm - High Output Layers @GCREATE",
|
||||
"path": "print/0.60mm - High Output Layers @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "0.20mm - Dual 2in1 @GCREATE",
|
||||
"path": "print/0.20mm - Dual 2in1 @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "0.20mm - Dual Chimera @GCREATE",
|
||||
"path": "print/0.20mm - Dual Chimera @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "print",
|
||||
"name": "0.20mm - Dual 2in1 PLA with PVA Support @GCREATE",
|
||||
"path": "print/0.20mm - Dual 2in1 PLA with PVA Support @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "*common*",
|
||||
"path": "filament/_common_.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "*PLA*",
|
||||
"path": "filament/_PLA_.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "*PET*",
|
||||
"path": "filament/_PET_.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "*ABS*",
|
||||
"path": "filament/_ABS_.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "*TPU90A*",
|
||||
"path": "filament/_TPU90A_.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "*CFPETG*",
|
||||
"path": "filament/_CFPETG_.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "*CFNYLON*",
|
||||
"path": "filament/_CFNYLON_.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "*CFPLA*",
|
||||
"path": "filament/_CFPLA_.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "*WOODFILLPLA*",
|
||||
"path": "filament/_WOODFILLPLA_.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PLA @GCREATE",
|
||||
"path": "filament/Prusament PLA @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PETG @GCREATE",
|
||||
"path": "filament/Prusament PETG @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ABS @GCREATE",
|
||||
"path": "filament/Generic ABS @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA @GCREATE",
|
||||
"path": "filament/Generic PLA @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA no Heated Bed @GCREATE",
|
||||
"path": "filament/Generic PLA no Heated Bed @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PETG @GCREATE",
|
||||
"path": "filament/Generic PETG @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Atomic PLA @GCREATE",
|
||||
"path": "filament/Atomic PLA @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Push Plastic PLA @GCREATE",
|
||||
"path": "filament/Push Plastic PLA @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "HT PLA @GCREATE",
|
||||
"path": "filament/HT PLA @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic HIPS @GCREATE",
|
||||
"path": "filament/Generic HIPS @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic TPU 90A @GCREATE",
|
||||
"path": "filament/Generic TPU 90A @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic CF PETG @GCREATE",
|
||||
"path": "filament/Generic CF PETG @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic CF Nylon @GCREATE",
|
||||
"path": "filament/Generic CF Nylon @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic CF PLA @GCREATE",
|
||||
"path": "filament/Generic CF PLA @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "ColorFabb Woodfill PLA @GCREATE",
|
||||
"path": "filament/ColorFabb Woodfill PLA @GCREATE.ini"
|
||||
},
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PVA @GCREATE - PLA and PVA Support",
|
||||
"path": "filament/Generic PVA @GCREATE - PLA and PVA Support.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "*common*",
|
||||
"path": "printer/_common_.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "*gCreate gMax 2*",
|
||||
"path": "printer/_gCreate gMax 2_.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "*gCreate gMax 2 Pro*",
|
||||
"path": "printer/_gCreate gMax 2 Pro_.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "*gCreate gMax 1.5XT Plus*",
|
||||
"path": "printer/_gCreate gMax 1.5XT Plus_.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "*gCreate gMax 2 Dual 2in1*",
|
||||
"path": "printer/_gCreate gMax 2 Dual 2in1_.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "*gCreate gMax 2 Dual Chimera*",
|
||||
"path": "printer/_gCreate gMax 2 Dual Chimera_.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 1.5XT Plus - 0.3mm nozzle",
|
||||
"path": "printer/gMax 1.5XT Plus - 0.3mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 1.5XT Plus - 0.4mm nozzle",
|
||||
"path": "printer/gMax 1.5XT Plus - 0.4mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 1.5XT Plus - 0.5mm nozzle",
|
||||
"path": "printer/gMax 1.5XT Plus - 0.5mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 1.5XT Plus - 0.8mm nozzle",
|
||||
"path": "printer/gMax 1.5XT Plus - 0.8mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 1.5XT Plus - 1.0mm nozzle",
|
||||
"path": "printer/gMax 1.5XT Plus - 1.0mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 2 - 0.3mm nozzle",
|
||||
"path": "printer/gMax 2 - 0.3mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 2 - 0.4mm nozzle",
|
||||
"path": "printer/gMax 2 - 0.4mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 2 - 0.5mm nozzle",
|
||||
"path": "printer/gMax 2 - 0.5mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 2 - 0.8mm nozzle",
|
||||
"path": "printer/gMax 2 - 0.8mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 2 - 1.0mm nozzle",
|
||||
"path": "printer/gMax 2 - 1.0mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 2 Pro - 0.3mm nozzle",
|
||||
"path": "printer/gMax 2 Pro - 0.3mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 2 Pro - 0.4mm nozzle",
|
||||
"path": "printer/gMax 2 Pro - 0.4mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 2 Pro - 0.5mm nozzle",
|
||||
"path": "printer/gMax 2 Pro - 0.5mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 2 Pro - 0.8mm nozzle",
|
||||
"path": "printer/gMax 2 Pro - 0.8mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 2 Pro - 1.0mm nozzle",
|
||||
"path": "printer/gMax 2 Pro - 1.0mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 2 Dual 2in1 - 0.5, 0.5mm nozzle",
|
||||
"path": "printer/gMax 2 Dual 2in1 - 0.5, 0.5mm nozzle.ini"
|
||||
},
|
||||
{
|
||||
"type": "printer",
|
||||
"name": "gMax 2 Dual Chimera - 0.5, 0.5mm nozzle",
|
||||
"path": "printer/gMax 2 Dual Chimera - 0.5, 0.5mm nozzle.ini"
|
||||
}
|
||||
],
|
||||
"asset_paths": [
|
||||
"GMAX15P_thumbnail.png",
|
||||
"GMAX2DUAL2IN1_thumbnail.png",
|
||||
"GMAX2DUAL_thumbnail.png",
|
||||
"GMAX2PRO_thumbnail.png",
|
||||
"GMAX2_thumbnail.png",
|
||||
"gmax15p.svg",
|
||||
"gmax15p_bed.stl",
|
||||
"gmax2.svg",
|
||||
"gmax2_bed.stl"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,6 @@
|
||||
[print:0.10mm - Very Thin Layers @GCREATE]
|
||||
inherits = *0.10mm*
|
||||
#Below works. Will only allow gMax 2 and gMax 2 Pro with specific nozzle sizes
|
||||
#compatible_printers_condition = nozzle_diameter[0]==0.3 or nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5 and printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2.*/
|
||||
compatible_printers_condition = (nozzle_diameter[0]==0.3 or nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)
|
||||
|
||||
@@ -0,0 +1,6 @@
|
||||
[print:0.15mm - Thin Layers @GCREATE]
|
||||
inherits = *0.15mm*
|
||||
#Below works. Will only allow gMax 2 and gMax 2 Pro with specific nozzle sizes
|
||||
#compatible_printers_condition = nozzle_diameter[0]==0.3 or nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5 and printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2.*/
|
||||
compatible_printers_condition = (nozzle_diameter[0]==0.3 or nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)
|
||||
|
||||
@@ -0,0 +1,11 @@
|
||||
[print:0.20mm - Dual 2in1 @GCREATE]
|
||||
inherits = *0.20mm*
|
||||
compatible_printers_condition = (nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2DUAL2IN1/)
|
||||
wipe_tower = 1
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 1
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 75
|
||||
wipe_tower_x = 100
|
||||
wipe_tower_y = 300
|
||||
|
||||
+151
@@ -0,0 +1,151 @@
|
||||
[print:0.20mm - Dual 2in1 PLA with PVA Support @GCREATE]
|
||||
inherits = *0.20mm*; 0.20mm - Dual 2in1 @GCREATE
|
||||
compatible_printers_condition = (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)
|
||||
avoid_crossing_perimeters = 0
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
bottom_fill_pattern = monotonic
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 0
|
||||
bridge_acceleration = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 1
|
||||
bridge_speed = 60
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
complete_objects = 0
|
||||
default_acceleration = 400
|
||||
dont_support_bridges = 0
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.2
|
||||
ensure_vertical_shell_thickness = 0
|
||||
external_perimeter_extrusion_width = 0
|
||||
external_perimeter_speed = 75%
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extrusion_width = 0
|
||||
fill_angle = 45
|
||||
first_layer_acceleration = 0
|
||||
first_layer_extrusion_width = 0
|
||||
first_layer_height = 0.23
|
||||
first_layer_speed = 35
|
||||
gap_fill_speed = 30
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 1
|
||||
infill_acceleration = 0
|
||||
infill_anchor = 600%
|
||||
infill_anchor_max = 50
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 80
|
||||
interface_shells = 0
|
||||
ironing = 0
|
||||
ironing_flowrate = 15%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 15
|
||||
ironing_type = top
|
||||
max_print_speed = 80
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 15
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0
|
||||
perimeter_speed = 65
|
||||
perimeters = 4
|
||||
post_process =
|
||||
print_settings_id = 0.20mm - Dual 2in1 @GCREATE PLA PVA Support
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 0
|
||||
skirt_distance = 6
|
||||
skirt_height = 1
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 30
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0
|
||||
solid_infill_speed = 35
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 1
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 0
|
||||
support_material_contact_distance = 0
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 2
|
||||
support_material_extrusion_width = 0
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 2
|
||||
support_material_interface_layers = 4
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 90%
|
||||
support_material_pattern = rectilinear-grid
|
||||
support_material_spacing = 3
|
||||
support_material_speed = 65
|
||||
support_material_synchronize_layers = 1
|
||||
support_material_threshold = 0
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 0
|
||||
thin_walls = 1
|
||||
threads = 8
|
||||
top_fill_pattern = monotonic
|
||||
top_infill_extrusion_width = 0
|
||||
top_solid_infill_speed = 35
|
||||
top_solid_layers = 4
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 130
|
||||
wipe_tower = 1
|
||||
wipe_tower_bridging = 20
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 75
|
||||
wipe_tower_x = 50
|
||||
wipe_tower_y = 400
|
||||
|
||||
|
||||
|
||||
##################################
|
||||
# SET FILAMENT VARIANTS #
|
||||
##################################
|
||||
|
||||
# TEMPLATE
|
||||
|
||||
#[filament:*PLA*]
|
||||
#inherits = *common*
|
||||
|
||||
#filament_type = PLA
|
||||
#filament_density = 1.24
|
||||
#filament_cost = 20
|
||||
|
||||
#first_layer_bed_temperature = 60
|
||||
#first_layer_temperature = 200
|
||||
#temperature = 200
|
||||
#bed_temperature = 60
|
||||
|
||||
#fan_always_on = 1
|
||||
#cooling = 1
|
||||
#disable_fan_first_layers = 1
|
||||
#max_fan_speed = 90
|
||||
#min_fan_speed = 90
|
||||
#bridge_fan_speed = 75
|
||||
|
||||
#fan_below_layer_time = 15
|
||||
#slowdown_below_layer_time = 10
|
||||
|
||||
#compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
|
||||
|
||||
|
||||
# Common filament preset across all filaments
|
||||
@@ -0,0 +1,15 @@
|
||||
[print:0.20mm - Dual Chimera @GCREATE]
|
||||
inherits = *0.20mm*
|
||||
compatible_printers_condition = (nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2DUAL/)
|
||||
# wipe tower
|
||||
wipe_tower = 1
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 1
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 75
|
||||
wipe_tower_x = 100
|
||||
wipe_tower_y = 300
|
||||
# ooze prevention
|
||||
ooze_prevention = 1
|
||||
standby_temperature_delta = -15
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
[print:0.20mm - Standard Layers @GCREATE]
|
||||
inherits = *0.20mm*
|
||||
compatible_printers_condition = (nozzle_diameter[0]==0.3 or nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
[print:0.20mm - Standard Layers Fast @GCREATE]
|
||||
inherits = *0.20mm*; *FAST*
|
||||
compatible_printers_condition = (nozzle_diameter[0]==0.3 or nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)
|
||||
|
||||
+4
@@ -0,0 +1,4 @@
|
||||
[print:0.20mm - Standard Layers Slow (PETG and TPU) @GCREATE]
|
||||
inherits = *0.20mm*; *SLOW*
|
||||
compatible_printers_condition = (nozzle_diameter[0]==0.3 or nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
[print:0.25mm - Thick Layers @GCREATE]
|
||||
inherits = *0.25mm*
|
||||
compatible_printers_condition = (nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
[print:0.30mm - Very Thick Layers @GCREATE]
|
||||
inherits = *0.3mm*
|
||||
compatible_printers_condition = (nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
[print:0.40mm - High Output Layers @GCREATE]
|
||||
inherits = *0.4mm*
|
||||
compatible_printers_condition = (nozzle_diameter[0]==0.5 or nozzle_diameter[0]==0.8 or nozzle_diameter[0]==1.0) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
[print:0.50mm - High Output Layers @GCREATE]
|
||||
inherits = *0.5mm*
|
||||
compatible_printers_condition = (nozzle_diameter[0]==0.8 or nozzle_diameter[0]==1.0) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
[print:0.60mm - High Output Layers @GCREATE]
|
||||
inherits = *0.6mm*
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.8 or nozzle_diameter[0]==1.0 and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[print:*0.10mm*]
|
||||
inherits = *common*
|
||||
layer_height = 0.10
|
||||
first_layer_height = 150%
|
||||
perimeters = 3
|
||||
bottom_solid_layers = 6
|
||||
top_solid_layers = 8
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[print:*0.15mm*]
|
||||
inherits = *common*
|
||||
layer_height = 0.15
|
||||
first_layer_height = 125%
|
||||
perimeters = 3
|
||||
bottom_solid_layers = 5
|
||||
top_solid_layers = 6
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
[print:*0.20mm*]
|
||||
inherits = *common*
|
||||
layer_height = 0.2
|
||||
first_layer_height = 125%
|
||||
first_layer_speed = 50%
|
||||
perimeters = 3
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[print:*0.25mm*]
|
||||
inherits = *common*
|
||||
layer_height = 0.25
|
||||
first_layer_height = 100%
|
||||
first_layer_speed = 50%
|
||||
top_infill_extrusion_width = 0
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[print:*0.3mm*]
|
||||
inherits = *common*
|
||||
layer_height = 0.3
|
||||
first_layer_height = 100%
|
||||
first_layer_speed = 50%
|
||||
top_infill_extrusion_width = 0
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
[print:*0.4mm*]
|
||||
inherits = *common*
|
||||
layer_height = 0.4
|
||||
first_layer_height = 100%
|
||||
first_layer_speed = 50%
|
||||
top_infill_extrusion_width = 0
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[print:*0.5mm*]
|
||||
inherits = *common*
|
||||
layer_height = 0.5
|
||||
first_layer_height = 100%
|
||||
first_layer_speed = 45%
|
||||
top_infill_extrusion_width = 0
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 3
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[print:*0.6mm*]
|
||||
inherits = *common*
|
||||
layer_height = 0.6
|
||||
first_layer_height = 100%
|
||||
first_layer_speed = 40%
|
||||
top_infill_extrusion_width = 0
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 3
|
||||
|
||||
@@ -0,0 +1,41 @@
|
||||
[print:*FAST*]
|
||||
#SPEED
|
||||
perimeter_speed = 70
|
||||
small_perimeter_speed = 85%
|
||||
external_perimeter_speed = 75%
|
||||
infill_speed = 85%
|
||||
solid_infill_speed = 70%
|
||||
top_solid_infill_speed = 65%
|
||||
support_material_speed = 75%
|
||||
bridge_speed = 45
|
||||
gap_fill_speed = 30
|
||||
|
||||
|
||||
#############################################################################
|
||||
# SET PRINTER AND NOZZLE SPECIFIC PROFLIES (THESE SHOW INT HE DROPDOWN) #
|
||||
#############################################################################
|
||||
|
||||
#we can add specific changes for specific printers and nozzle sizes. Just put in conditionals
|
||||
# compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/ and printer_model=~/.*GMAX2PRO.*/ and nozzle_diameter[0]==0.5
|
||||
|
||||
|
||||
#TEMPLATE
|
||||
|
||||
#SPEED SETTINGS
|
||||
#[print:0.10mm - Very Thin Layers @GCREATE]
|
||||
#perimeter_speed = 100%
|
||||
#small_perimeter_speed = 100%
|
||||
#external_perimeter_speed = 100%
|
||||
#infill_speed = 100%
|
||||
#solid_infill_speed = 100%
|
||||
#top_solid_infill_speed = 100%
|
||||
#support_material_speed = 100%
|
||||
#bridge_speed = 100%
|
||||
#don't adjust gap speed above 30 or it causes layer shifting
|
||||
#gap_fill_speed = 30
|
||||
|
||||
#ADVANCED
|
||||
#
|
||||
|
||||
|
||||
|
||||
@@ -0,0 +1,12 @@
|
||||
[print:*SLOW*]
|
||||
#SPEED
|
||||
perimeter_speed = 40
|
||||
small_perimeter_speed = 35
|
||||
external_perimeter_speed = 35
|
||||
infill_speed = 40
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_speed = 35
|
||||
bridge_speed = 35
|
||||
gap_fill_speed = 30
|
||||
|
||||
@@ -0,0 +1,103 @@
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 0
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.95
|
||||
bridge_speed = 35
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
complete_objects = 0
|
||||
default_acceleration = 400
|
||||
dont_support_bridges = 1
|
||||
elefant_foot_compensation = 0
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_fill_pattern = rectilinear
|
||||
external_perimeters_first = 0
|
||||
external_perimeter_extrusion_width = 0
|
||||
external_perimeter_speed = 65%
|
||||
extra_perimeters = 0
|
||||
extrusion_width = 0
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = 3dhoneycomb
|
||||
first_layer_extrusion_width = 0
|
||||
first_layer_height = 125%
|
||||
first_layer_speed = 65%
|
||||
gap_fill_speed = 30
|
||||
gcode_comments = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 50
|
||||
interface_shells = 0
|
||||
max_print_speed = 100
|
||||
max_volumetric_extrusion_rate_slope_negative = 0
|
||||
max_volumetric_extrusion_rate_slope_positive = 0
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 15
|
||||
notes =
|
||||
overhangs = 0
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}.gcode
|
||||
perimeters = 2
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0
|
||||
perimeter_speed = 60
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = nearest
|
||||
single_extruder_multi_material_priming = 0
|
||||
skirts = 1
|
||||
skirt_distance = 2
|
||||
skirt_height = 1
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_below_area = 0
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0
|
||||
solid_infill_speed = 80%
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_extruder = 0
|
||||
support_material_extrusion_width = 0
|
||||
support_material_interface_extruder = 0
|
||||
support_material_angle = 0
|
||||
support_material_buildplate_only = 0
|
||||
support_material_enforce_layers = 0
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_layers = 4
|
||||
support_material_interface_spacing = 0.2
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2
|
||||
support_material_speed = 40
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 45
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 60%
|
||||
thin_walls = 0
|
||||
top_infill_extrusion_width = 0
|
||||
top_solid_infill_speed = 50%
|
||||
travel_speed = 100
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 75
|
||||
wipe_tower_x = 170
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
||||
##################################
|
||||
# SET LAYER HEIGHT VARIANTS #
|
||||
##################################
|
||||
|
||||
#common layer height variants
|
||||
|
||||
@@ -0,0 +1,52 @@
|
||||
[printer:*common*]
|
||||
printer_technology = FFF
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n
|
||||
extruder_colour = #FFFF00
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
silent_mode = 0
|
||||
remaining_times = 0
|
||||
machine_max_acceleration_e = 1000
|
||||
machine_max_acceleration_extruding = 2000
|
||||
machine_max_acceleration_retracting = 1500
|
||||
machine_max_acceleration_x = 800
|
||||
machine_max_acceleration_y = 800
|
||||
machine_max_acceleration_z = 15
|
||||
machine_max_feedrate_e = 120
|
||||
machine_max_feedrate_x = 500
|
||||
machine_max_feedrate_y = 500
|
||||
machine_max_feedrate_z = 10
|
||||
machine_max_jerk_e = 2.5
|
||||
machine_max_jerk_x = 10
|
||||
machine_max_jerk_y = 10
|
||||
machine_max_jerk_z = 0.4
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
retract_before_travel = 1
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 1
|
||||
retract_length = 1
|
||||
retract_length_toolchange = 1
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 70
|
||||
single_extruder_multi_material = 0
|
||||
thumbnails = 95x95
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
extruder_clearance_height = 25
|
||||
extruder_clearance_radius = 45
|
||||
|
||||
|
||||
###################################
|
||||
# SET PRINTER SPECIFIC PROFILES #
|
||||
###################################
|
||||
|
||||
@@ -0,0 +1,12 @@
|
||||
[printer:*gCreate gMax 1.5XT Plus*]
|
||||
inherits = *common*
|
||||
printer_model = GMAX15P
|
||||
#printer_variant = 0.5
|
||||
max_layer_height = 0.6
|
||||
min_layer_height = 0.08
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_GCREATE\nPRINTER_MODEL_GMAX15P
|
||||
bed_shape = 0x0,410x0,410x410,0x410
|
||||
max_print_height = 533
|
||||
|
||||
default_print_profile = 0.20mm - Standard Layers @GCREATE
|
||||
|
||||
@@ -0,0 +1,23 @@
|
||||
[printer:*gCreate gMax 2 Dual 2in1*]
|
||||
inherits = *common*
|
||||
printer_model = GMAX2DUAL2IN1
|
||||
max_layer_height = 0.7
|
||||
min_layer_height = 0.08
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_GCREATE\nPRINTER_MODEL_GMAX2DUAL2IN1
|
||||
start_gcode = G90\nG28\nM420 Z20\nG1 Z5 F5000
|
||||
bed_shape = 0x0,457x0,457x457,0x457
|
||||
max_print_height = 610
|
||||
default_print_profile = 0.20mm - Standard Layers @GCREATE
|
||||
single_extruder_multi_material = 1
|
||||
#cooling tube retraction
|
||||
cooling_tube_retraction = 30
|
||||
cooling_tube_length = 6
|
||||
parking_pos_retraction = 30
|
||||
extra_loading_move = -1
|
||||
#multi tool settings
|
||||
extruder_colour = #FF3333;#0000CC
|
||||
extruder_offset = 0x0,0x0
|
||||
retract_length_toolchange = 30;30
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
|
||||
@@ -0,0 +1,31 @@
|
||||
[printer:*gCreate gMax 2 Dual Chimera*]
|
||||
inherits = *common*
|
||||
printer_model = GMAX2DUAL
|
||||
max_layer_height = 0.7
|
||||
min_layer_height = 0.08
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_GCREATE\nPRINTER_MODEL_GMAX2DUAL
|
||||
start_gcode = G90\nG28\nM420 Z20\nG1 Z5 F5000\nM218 T1 X20 Y0 ; Set second extruder offset
|
||||
end_gcode = M104 S0 T0 ; turn off temperature\nM104 S0 T1 ; turn off 2nd extruder\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+5, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F3000 ; present print\n{if layer_z < max_print_height-10}G1 Z{z_offset+min(layer_z+70, max_print_height-10)} F600{endif} ; Move print head up\nM84 X Y E ; disable motors
|
||||
bed_shape = 0x0,457x0,457x457,0x457
|
||||
max_print_height = 610
|
||||
default_print_profile = 0.20mm - Standard Layers @GCREATE
|
||||
single_extruder_multi_material = 0
|
||||
#multi tool settings
|
||||
extruder_colour = #FF3333;#0000CC
|
||||
extruder_offset = 0x0,20x0
|
||||
retract_length_toolchange = 8,8
|
||||
retract_speed = 70,70
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
|
||||
##############################################
|
||||
# SET NOZZLE DIAMETER VARIANTS PER PRINTER #
|
||||
##############################################
|
||||
|
||||
#these are the names and printers displayed in the drop down menus when selecting profiles
|
||||
|
||||
#####################################
|
||||
#gMax 1.5 XT+ and gMax 1.5+ profiles#
|
||||
#####################################
|
||||
|
||||
|
||||
@@ -0,0 +1,13 @@
|
||||
[printer:*gCreate gMax 2 Pro*]
|
||||
inherits = *common*
|
||||
printer_model = GMAX2PRO
|
||||
#printer_variant = 0.5
|
||||
max_layer_height = 0.7
|
||||
min_layer_height = 0.08
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_GCREATE\nPRINTER_MODEL_GMAX2PRO
|
||||
start_gcode = G90\nG28\nM420 Z20\nG1 Z5 F5000
|
||||
bed_shape = 0x0,457x0,457x457,0x457
|
||||
max_print_height = 610
|
||||
|
||||
default_print_profile = 0.20mm - Standard Layers @GCREATE
|
||||
|
||||
@@ -0,0 +1,38 @@
|
||||
[printer:*gCreate gMax 2*]
|
||||
inherits = *common*
|
||||
printer_model = GMAX2
|
||||
#printer_variant = 0.5
|
||||
max_layer_height = 0.7
|
||||
min_layer_height = 0.15
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_GCREATE\nPRINTER_MODEL_GMAX2
|
||||
bed_shape = 0x0,457x0,457x457,0x457
|
||||
max_print_height = 610
|
||||
machine_max_acceleration_e = 5000
|
||||
machine_max_acceleration_extruding = 500
|
||||
machine_max_acceleration_retracting = 1000
|
||||
machine_max_acceleration_x = 600
|
||||
machine_max_acceleration_y = 600
|
||||
machine_max_acceleration_z = 15
|
||||
machine_max_feedrate_e = 60
|
||||
machine_max_feedrate_x = 500
|
||||
machine_max_feedrate_y = 500
|
||||
machine_max_feedrate_z = 8
|
||||
machine_max_jerk_e = 5
|
||||
machine_max_jerk_x = 8
|
||||
machine_max_jerk_y = 8
|
||||
machine_max_jerk_z = 0.4
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
#nozzle_diameter = 0.7
|
||||
retract_before_travel = 2
|
||||
retract_length = 0.75
|
||||
retract_speed = 70
|
||||
deretract_speed = 40
|
||||
retract_before_wipe = 70%
|
||||
default_print_profile = 0.20mm - Standard Layers @GCREATE
|
||||
start_gcode = M420 Z20\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0
|
||||
end_gcode = M104 S0 T0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+5, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F3000 ; present print\n{if layer_z < max_print_height-10}G1 Z{z_offset+min(layer_z+70, max_print_height-10)} F600{endif} ; Move print head up\nM84 X Y E ; disable motors
|
||||
|
||||
#[printer:*abl*]
|
||||
#start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set extruder temp for auto bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp#\nG28 ; home all\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed #temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0.0\nG1 Y190 E15.0 F1500.0 ; intro line\nG1 X2.3 F5000\nG1 Y10 E15.0 F1200.0 ; intro line\nG92 #E0.0
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:gMax 1.5XT Plus - 0.3mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 1.5XT Plus*
|
||||
printer_variant = 0.3
|
||||
nozzle_diameter = 0.3
|
||||
max_layer_height = 0.25
|
||||
min_layer_height = 0.08
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:gMax 1.5XT Plus - 0.4mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 1.5XT Plus*
|
||||
printer_variant = 0.4
|
||||
nozzle_diameter = 0.4
|
||||
max_layer_height = 0.32
|
||||
min_layer_height = 0.12
|
||||
#default_print_profile = 0.15mm - Thin Layers @GCREATE @0.4 nozzle
|
||||
|
||||
@@ -0,0 +1,11 @@
|
||||
[printer:gMax 1.5XT Plus - 0.5mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 1.5XT Plus*
|
||||
printer_variant = 0.5
|
||||
nozzle_diameter = 0.5
|
||||
max_layer_height = 0.4
|
||||
min_layer_height = 0.15
|
||||
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
|
||||
#retract_length = 3.5
|
||||
#default_print_profile = 0.20mm - Normal Layers @GCREATE @0.5 nozzle
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
[printer:gMax 1.5XT Plus - 0.8mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 1.5XT Plus*
|
||||
printer_variant = 0.8
|
||||
nozzle_diameter = 0.8
|
||||
max_layer_height = 0.7
|
||||
min_layer_height = 0.25
|
||||
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
|
||||
#retract_length = 3.5
|
||||
|
||||
@@ -0,0 +1,15 @@
|
||||
[printer:gMax 1.5XT Plus - 1.0mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 1.5XT Plus*
|
||||
printer_variant = 1.0
|
||||
nozzle_diameter = 1.0
|
||||
max_layer_height = 0.8
|
||||
min_layer_height = 0.3
|
||||
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
|
||||
#retract_length = 3.5
|
||||
|
||||
|
||||
#################
|
||||
#gMax 2 profiles#
|
||||
#################
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:gMax 2 - 0.3mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 2*
|
||||
printer_variant = 0.3
|
||||
nozzle_diameter = 0.3
|
||||
max_layer_height = 0.25
|
||||
min_layer_height = 0.08
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:gMax 2 - 0.4mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 2*
|
||||
printer_variant = 0.4
|
||||
nozzle_diameter = 0.4
|
||||
max_layer_height = 0.32
|
||||
min_layer_height = 0.12
|
||||
#default_print_profile = 0.15mm - Thin Layers @GCREATE @0.4 nozzle
|
||||
|
||||
@@ -0,0 +1,11 @@
|
||||
[printer:gMax 2 - 0.5mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 2*
|
||||
printer_variant = 0.5
|
||||
nozzle_diameter = 0.5
|
||||
max_layer_height = 0.4
|
||||
min_layer_height = 0.15
|
||||
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
|
||||
#retract_length = 3.5
|
||||
#default_print_profile = 0.20mm - Normal Layers @GCREATE @0.5 nozzle
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
[printer:gMax 2 - 0.8mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 2*
|
||||
printer_variant = 0.8
|
||||
nozzle_diameter = 0.8
|
||||
max_layer_height = 0.7
|
||||
min_layer_height = 0.25
|
||||
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
|
||||
#retract_length = 3.5
|
||||
|
||||
@@ -0,0 +1,15 @@
|
||||
[printer:gMax 2 - 1.0mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 2*
|
||||
printer_variant = 1.0
|
||||
nozzle_diameter = 1.0
|
||||
max_layer_height = 0.8
|
||||
min_layer_height = 0.3
|
||||
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
|
||||
#retract_length = 3.5
|
||||
|
||||
|
||||
#####################
|
||||
#gMax 2 Pro profiles#
|
||||
#####################
|
||||
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
[printer:gMax 2 Dual 2in1 - 0.5, 0.5mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 2 Dual 2in1*
|
||||
printer_variant = 0.5
|
||||
nozzle_diameter = 0.5, 0.5
|
||||
max_layer_height = 0.4
|
||||
min_layer_height = 0.15
|
||||
|
||||
##############################
|
||||
#gMax 2 Dual Chimera profiles#
|
||||
##############################
|
||||
|
||||
+6
@@ -0,0 +1,6 @@
|
||||
[printer:gMax 2 Dual Chimera - 0.5, 0.5mm nozzle]
|
||||
inherits = *gCreate gMax 2 Dual Chimera*
|
||||
printer_variant = 0.5
|
||||
nozzle_diameter = 0.5, 0.5
|
||||
max_layer_height = 0.4
|
||||
min_layer_height = 0.15
|
||||
@@ -0,0 +1,8 @@
|
||||
[printer:gMax 2 Pro - 0.3mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 2 Pro*
|
||||
printer_variant = 0.3
|
||||
nozzle_diameter = 0.3
|
||||
max_layer_height = 0.25
|
||||
min_layer_height = 0.08
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
[printer:gMax 2 Pro - 0.4mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 2 Pro*
|
||||
printer_variant = 0.4
|
||||
nozzle_diameter = 0.4
|
||||
max_layer_height = 0.32
|
||||
min_layer_height = 0.12
|
||||
#default_print_profile = 0.15mm - Thin Layers @GCREATE @0.4 nozzle
|
||||
|
||||
@@ -0,0 +1,11 @@
|
||||
[printer:gMax 2 Pro - 0.5mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 2 Pro*
|
||||
printer_variant = 0.5
|
||||
nozzle_diameter = 0.5
|
||||
max_layer_height = 0.4
|
||||
min_layer_height = 0.15
|
||||
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
|
||||
#retract_length = 3.5
|
||||
#default_print_profile = 0.20mm - Normal Layers @GCREATE @0.5 nozzle
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
[printer:gMax 2 Pro - 0.8mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 2 Pro*
|
||||
printer_variant = 0.8
|
||||
nozzle_diameter = 0.8
|
||||
max_layer_height = 0.7
|
||||
min_layer_height = 0.25
|
||||
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
|
||||
#retract_length = 3.5
|
||||
|
||||
@@ -0,0 +1,14 @@
|
||||
[printer:gMax 2 Pro - 1.0mm nozzle]
|
||||
#match printer name above
|
||||
inherits = *gCreate gMax 2 Pro*
|
||||
printer_variant = 1.0
|
||||
nozzle_diameter = 1.0
|
||||
max_layer_height = 0.8
|
||||
min_layer_height = 0.3
|
||||
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
|
||||
#retract_length = 3.5
|
||||
|
||||
###########################
|
||||
#gMax 2 Dual 2in1 profiles#
|
||||
###########################
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
[printer_model:GMAX15P]
|
||||
name = gMax 1.5XT Plus
|
||||
variants = 0.5; 0.3; 0.4; 0.8; 1.0
|
||||
technology = FFF
|
||||
family = GMAX
|
||||
bed_model = gmax15p_bed.stl
|
||||
bed_texture = gmax15p.svg
|
||||
default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE
|
||||
|
||||
thumbnail = GMAX15P_thumbnail.png
|
||||
@@ -0,0 +1,12 @@
|
||||
[printer_model:GMAX2]
|
||||
name = gMax 2
|
||||
variants = 0.5; 0.3; 0.4; 0.8; 1.0
|
||||
technology = FFF
|
||||
family = GMAX
|
||||
#has to be named (printer)_bed.stl
|
||||
bed_model = gmax2_bed.stl
|
||||
bed_texture = gmax2.svg
|
||||
default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE
|
||||
|
||||
|
||||
thumbnail = GMAX2_thumbnail.png
|
||||
@@ -0,0 +1,15 @@
|
||||
[printer_model:GMAX2DUAL]
|
||||
name = gMax 2 Dual Chimera
|
||||
variants = 0.5
|
||||
technology = FFF
|
||||
family = GMAX
|
||||
#has to be named (printer)_bed.stl
|
||||
bed_model = gmax2_bed.stl
|
||||
bed_texture = gmax2.svg
|
||||
default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE
|
||||
|
||||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||||
# not make it into the user interface.
|
||||
|
||||
# Common print presets for every printer model. will be overtaken by presets further down that are printer, filament nozzle or layer height specific
|
||||
thumbnail = GMAX2DUAL_thumbnail.png
|
||||
@@ -0,0 +1,11 @@
|
||||
[printer_model:GMAX2DUAL2IN1]
|
||||
name = gMax 2 Dual 2in1
|
||||
variants = 0.5
|
||||
technology = FFF
|
||||
family = GMAX
|
||||
#has to be named (printer)_bed.stl
|
||||
bed_model = gmax2_bed.stl
|
||||
bed_texture = gmax2.svg
|
||||
default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE
|
||||
|
||||
thumbnail = GMAX2DUAL2IN1_thumbnail.png
|
||||
@@ -0,0 +1,11 @@
|
||||
[printer_model:GMAX2PRO]
|
||||
name = gMax 2 Pro
|
||||
variants = 0.5; 0.3; 0.4; 0.8; 1.0
|
||||
technology = FFF
|
||||
family = GMAX
|
||||
#has to be named (printer)_bed.stl
|
||||
bed_model = gmax2_bed.stl
|
||||
bed_texture = gmax2.svg
|
||||
default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE
|
||||
|
||||
thumbnail = GMAX2PRO_thumbnail.png
|
||||
@@ -0,0 +1,9 @@
|
||||
min_slic3r_version = 2.9.1-alpha0
|
||||
2.1.0 Extruder clearance moved to printer settings.
|
||||
min_slic3r_version = 2.8.0-alpha0
|
||||
2.0.0 Updated for PS2.8.0.
|
||||
max_slic3r_version = 2.7.9
|
||||
min_slic3r_version = 2.4.0-alpha0
|
||||
1.0.1 Speed improvements, start gcode changes, added HIPS filament.
|
||||
1.0.0 Initial version
|
||||
|
||||
+25
@@ -0,0 +1,25 @@
|
||||
[vendor]
|
||||
repo_id = non-prusa-fff
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = gCreate
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 2.1.0
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/gCreate/
|
||||
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
|
||||
#Basic methodology
|
||||
|
||||
# Common settings are overridden by settings further down the line as they get more specific
|
||||
#
|
||||
# Common printer settings > Common settings based on layer height > Name displayed on quality dropdown
|
||||
#
|
||||
# Common filament settings > common filament settings based on type > Specific settings based on vendor
|
||||
#
|
||||
|
||||
Reference in New Issue
Block a user