Initial Profile Sources

2026-10-01 10:37:17 +00:00 · 2026-03-19 01:54:47 +00:00
parent 7e2e8f9d47
commit 1f7873734a
13374 changed files with 256890 additions and 0 deletions
@@ -0,0 +1,7 @@
+[filament:Atomic PLA @GCREATE]
+inherits = *PLA*
+filament_vendor = Atomic Filament
+temperature = 215
+first_layer_temperature = 205
+bed_temperature = 60
+
@@ -0,0 +1,4 @@
+[filament:ColorFabb Woodfill PLA @GCREATE]
+inherits = *WOODFILLPLA*
+filament_vendor = ColorFabb
+
@@ -0,0 +1,4 @@
+[filament:Generic ABS @GCREATE]
+inherits = *ABS*
+filament_vendor = Generic
+
@@ -0,0 +1,4 @@
+[filament:Generic CF Nylon @GCREATE]
+inherits = *CFNYLON*
+filament_vendor = Generic
+
@@ -0,0 +1,4 @@
+[filament:Generic CF PETG @GCREATE]
+inherits = *CFPETG*
+filament_vendor = Generic
+
@@ -0,0 +1,4 @@
+[filament:Generic CF PLA @GCREATE]
+inherits = *CFPLA*
+filament_vendor = Generic
+
@@ -0,0 +1,10 @@
+[filament:Generic HIPS @GCREATE]
+inherits = *PET*
+filament_vendor = Generic
+filament_density = 1.04
+temperature = 230
+first_layer_temperature = 235
+bed_temperature = 100
+first_layer_bed_temperature = 100
+filament_type = HIPS
+
@@ -0,0 +1,8 @@
+[filament:Generic PETG @GCREATE]
+inherits = *PET*
+filament_vendor = Generic
+temperature = 230
+bed_temperature = 70
+first_layer_temperature = 235
+first_layer_bed_temperature = 70
+
@@ -0,0 +1,4 @@
+[filament:Generic PLA @GCREATE]
+inherits = *PLA*
+filament_vendor = Generic
+
@@ -0,0 +1,9 @@
+[filament:Generic PLA no Heated Bed @GCREATE]
+inherits = *PLA*
+filament_vendor = Generic
+# set bed to zero
+first_layer_temperature = 205
+temperature = 205
+first_layer_bed_temperature = 0
+bed_temperature = 0
+
@@ -0,0 +1,39 @@
+[filament:Generic PVA @GCREATE - PLA and PVA Support]
+bed_temperature = 0
+bridge_fan_speed = 75
+#compatible_printers_condition = (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 15
+filament_colour = #F5F2C4
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 0
+filament_loading_speed = 30
+filament_loading_speed_start = 30
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 7
+filament_ramming_parameters = "0"
+filament_settings_id = "Generic PVA Support @GCREATE"
+filament_soluble = 1
+filament_toolchange_delay = 0
+filament_type = PVA
+filament_unload_time = 0
+filament_unloading_speed = 30
+filament_unloading_speed_start = 30
+filament_vendor = Generic
+first_layer_temperature = 195
+inherits = Generic PLA @GCREATE
+max_fan_speed = 80
+min_fan_speed = 50
+min_print_speed = 15
+slowdown_below_layer_time = 10
+start_filament_gcode = "; Filament gcode\n"
+temperature = 195
+
+#################################
+#  SET COMMON PRINTER SETTINGS  #
+#################################
+
+# Common printer preset
@@ -0,0 +1,4 @@
+[filament:Generic TPU 90A @GCREATE]
+inherits = *TPU90A*
+filament_vendor = Generic
+
@@ -0,0 +1,6 @@
+[filament:HT PLA @GCREATE]
+inherits = *PLA*
+filament_vendor = ProtoPasta
+temperature = 250
+bed_temperature = 70
+
@@ -0,0 +1,11 @@
+[filament:Prusament PETG @GCREATE]
+inherits = *PET*
+filament_vendor = Prusa Polymers
+temperature = 245
+bed_temperature = 70
+bridge_fan_speed = 50
+first_layer_temperature = 245
+first_layer_bed_temperature = 70
+filament_cost = 24.99
+filament_density = 1.27
+
@@ -0,0 +1,10 @@
+[filament:Prusament PLA @GCREATE]
+inherits = *PLA*
+filament_vendor = Prusa Polymers
+temperature = 205
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 50
+filament_cost = 24.99
+filament_density = 1.24
+
@@ -0,0 +1,6 @@
+[filament:Push Plastic PLA @GCREATE]
+inherits = *PLA*
+filament_vendor = Push Plastic
+temperature = 200
+bed_temperature = 60
+
@@ -0,0 +1,20 @@
+[filament:*ABS*]
+inherits = *common*
+bed_temperature = 70
+cooling = 0
+disable_fan_first_layers = 3
+fan_below_layer_time = 15
+filament_colour = #FF8000
+filament_max_volumetric_speed = 8
+filament_type = ABS
+filament_density = 1.27
+filament_cost = 30
+first_layer_bed_temperature = 80
+first_layer_temperature = 235
+fan_always_on = 0
+max_fan_speed = 50
+min_fan_speed = 20
+bridge_fan_speed = 50
+temperature = 235
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
+
@@ -0,0 +1,14 @@
+[filament:*CFNYLON*]
+inherits = *common*
+filament_type = Carbon Fiber
+
+#need to add speed, cooling, retraction and brim
+temperature = 250
+bed_temperature = 65
+bridge_fan_speed = 50
+first_layer_temperature = 250
+first_layer_bed_temperature = 65
+#filament_cost = 24.99
+filament_density = 1.06
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
+
@@ -0,0 +1,5 @@
+[filament:*CFPETG*]
+inherits = *common*; *PET*
+filament_type = Carbon Fiber
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
+
@@ -0,0 +1,14 @@
+[filament:*CFPLA*]
+inherits = *common*
+filament_type = Carbon Fiber
+
+#need to add speed, cooling, retraction and brim
+
+#temperature = 245
+#bed_temperature = 70
+#first_layer_temperature = 245
+#first_layer_bed_temperature = 70
+#filament_cost = 24.99
+#filament_density = 1.27
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
+
@@ -0,0 +1,20 @@
+[filament:*PET*]
+inherits = *common*
+bed_temperature = 70
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 15
+filament_colour = #FF8000
+filament_max_volumetric_speed = 8
+filament_type = PETG
+filament_density = 1.27
+filament_cost = 30
+first_layer_bed_temperature = 70
+first_layer_temperature = 240
+fan_always_on = 1
+max_fan_speed = 50
+min_fan_speed = 20
+bridge_fan_speed = 50
+temperature = 240
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
+
@@ -0,0 +1,30 @@
+[filament:*PLA*]
+inherits = *common*
+extrusion_multiplier = 0.94
+bed_temperature = 60
+fan_below_layer_time = 15
+filament_colour = #FF3232
+filament_max_volumetric_speed = 0
+filament_type = PLA
+filament_density = 1.24
+filament_cost = 20
+first_layer_bed_temperature = 60
+first_layer_temperature = 200
+
+filament_cooling_moves = 0
+filament_loading_speed = 30
+filament_loading_speed_start = 30
+filament_ramming_parameters = "0"
+filament_unload_time = 0
+filament_unloading_speed = 30
+filament_unloading_speed_start = 30
+
+fan_always_on = 1
+cooling = 1
+disable_fan_first_layers = 1
+max_fan_speed = 80
+min_fan_speed = 40
+bridge_fan_speed = 80
+temperature = 200
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
+
@@ -0,0 +1,21 @@
+[filament:*TPU90A*]
+inherits = *common*
+filament_type = TPU
+
+filament_density = 1.20
+filament_cost = 25
+
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+temperature = 215
+bed_temperature = 60
+
+fan_always_on = 1
+cooling = 1
+disable_fan_first_layers = 1
+max_fan_speed = 50
+min_fan_speed = 35
+bridge_fan_speed = 60
+
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
+
@@ -0,0 +1,15 @@
+[filament:*WOODFILLPLA*]
+inherits = *common*; *PLA*
+
+#need to add speed, cooling, retraction and brim
+
+#temperature = 245
+#bed_temperature = 70
+#first_layer_temperature = 245
+#first_layer_bed_temperature = 70
+#filament_cost = 24.99
+#filament_density = 1.27
+
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
+
+#specific filament settings per brand. These are the names displayed in the list
@@ -0,0 +1,12 @@
+[filament:*common*]
+cooling = 0
+extrusion_multiplier = 1
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+min_print_speed = 15
+slowdown_below_layer_time = 10
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
+
+
+# Common filament preset across all PLA filaments